Development of a glucose oxidase-based biocatalyst adopting both physical entrapment and crosslinking, and its use in biofuel cells

Ti3C2 MXene-based nanozyme as coreaction accelerator for enhancing electrochemiluminescence of glucose biosensing

Delamination of the exfoliated multilayer MXenes with electro-catalysts, not only leads to increasing surface area for high electrochemiluminescent (ECL) signal tracer loading but also provides highly sensitive achievements in a coreaction accelerator manner. To this end, herein, we used bromophenol blue (BPB)-delaminated multilayer Ti3C2 MXene as both a coreaction accelerator to promote the electrochemiluminescent (ECL) reaction rate of luminol (LUM) and the co-reactant H2O2 and a substrate for retaining high loading of glucose oxidase (GOx)-conjugated polyethylene imine (PEI) along with luminophore species into more open structure of Ti3C2 MXene for sensitive detection of glucose. In the presence of glucose, in situ generating H2O2 product through a GOx-catalyzed process could produce abundant •OH radicals via the peroxidase-like activity of the BPB@Ti3C2 in the LUM ECL reaction. Moreover, decreasing the distance between the high-content LUM into the BPB@Ti3C2 and the generated •OH, minimizes the decomposition of highly active •OH, providing a superb ECL signal. Last, the proximity of incorporated GOx into the delaminated Ti3C2 MXene near the electrode allows efficient electron transfer between the electrode and enzyme. The integration of such amplifying effects endowed high sensitivity and excellent selectivity for glucose with a low limit of detection of 0.02 μM in the wide range of 0.01 μM-40,000 μM, enabling the feasibility of the glucose analysis in human serum samples. Overall, the enhanced ECL based on the BPB@Ti3C2 opens a new horizon to develop highly sensitive MXene-based ECL toward the field of biosensors.

Wheat straw-based microbial electrochemical reactor for azo dye decolorization and simultaneous bioenergy generation

Microbial fuel cells have emerged as a technique that can effectively treat wastewater with simultaneous electricity generation. The present study explored the performance of microbial fuel cell for decolorizing and degradation of azo dyes including, remazol brilliant blue (RBB), mordant blue 9 (MB9), acid red1 (AR1), and orange G (OG), while, simultaneously generating electricity. Wheat straw and its hydrolysate was used as a potential substrate in MFC. The hydrolysate was prepared through the degradation of wheat straw by P. floridensis, P. brevispora and P. chrysosporium, while the yeast Pichia fermentans was used as biocatalyst. Dye decolorization was carried out in a fungus-yeast mediated single-chambered MFC batch mode, U-shaped reactor, and bottle reactor in continuous mode. The maximum power density recorded in U shaped continuous reactor was 34.99 mW m^-2 on 21st day of the experiment. The best response of dye decolorization was observed in the case of MB9 (96%) with P. floridensis in the continuous electrochemical reactor followed by RBB (90-95%), OG (76%), and AR1 (38%). The toxicity of the treated wastewater was assessed using phytotoxicity analysis.

Paper-based platforms for microbial electrochemical cell-based biosensors: A review

The development of low-cost analytical devices for on-site water quality monitoring is a critical need, especially for developing countries and remote communities in developed countries with limited resources. Microbial electrochemical cell-based (MXC) biosensors have been quite promising for quantitative and semi-quantitative (often qualitative) measurements of various water quality parameters due to their low cost and simplicity compared to traditional analytical methods. However, conventional MXC biosensors often encounter challenges, such as the slow establishment of biofilms, low sensitivity, and poor recoverability, making them unable to be applied for practical cases. In response, MXC biosensors assembled with paper-based materials demonstrated tremendous potentials to enhance sensitivity and field applicability. Furthermore, the paper-based platforms offer many prominent features, including autonomous liquid transport, rapid bacterial adhesion, lowered resistance, low fabrication cost (<$1 in USD), and eco-friendliness. Therefore, this review aims to summarize the current trend and applications of paper-based MXC biosensors, along with critical discussions on their field applicability. Moreover, future advancements of paper-based MXC biosensors, such as developing a novel paper-based biobatteries, increasing the system performance using an unique biocatalyst, such as yeast, and integrating the biosensor system with other advanced tools, such as machine learning and 3D printing, are highlighted.

Rational design of N-doped CNTs@C3N4 network for dual-capture of biocatalysts in enzymatic glucose/O2 biofuel cells

Carbonaceous materials are promising electrode materials for enzymatic biofuel cells (EBFCs) due to their excellent electrical conductivity, chemical and physical stability and biocompatibility. Design and preparation of carbon materials with a hollow structure and a rough surface are of great significance for immobilization of enzymes both inside and outside the carbon materials for EBFC applications. We report herein the synthesis of novel carbonaceous materials consisting of bamboo-shaped hollow N-doped carbon nanotubes (N-CNTs) and C3N4 nanosheets (denoted as N-CNTs@C3N4) as electrode materials for dual-capture of enzymes in glucose/O2 EBFCs. The combination of one-dimensional N-CNTs with an open structure and two-dimensional C3N4 nanosheets forms a three-dimensional crosslinking network that significantly enhances the immobilization of enzymes, electrode stability, and mass transfer of substrates, thus boosting the EBFC performance. As a result, EBFCs equipped with N-CNTs@C3N4 can generate a high open circuit potential of 0.93 V and output a maximum power density of 0.57 mW cm-2 at 0.47 V. Additionally, the as-fabricated glucose/O2 EBFCs are capable of directly harvesting energy from various soft drinks, which indicates the promising applications of the N-CNTs@C3N4 nanocomposite as an electrode material for EBFCs.

Tunable Polymeric Scaffolds for Enzyme Immobilization

The number of methodologies for the immobilization of enzymes using polymeric supports is continuously growing due to the developments in the fields of biotechnology, polymer chemistry, and nanotechnology in the last years. Despite being excellent catalysts, enzymes are very sensitive molecules and can undergo denaturation beyond their natural environment. For overcoming this issue, polymer chemistry offers a wealth of opportunities for the successful combination of enzymes with versatile natural or synthetic polymers. The fabrication of functional, stable, and robust biocatalytic hybrid materials (nanoparticles, capsules, hydrogels, or films) has been proven advantageous for several applications such as biomedicine, organic synthesis, biosensing, and bioremediation. In this review, supported with recent examples of enzyme-protein hybrids, we provide an overview of the methods used to combine both macromolecules, as well as the future directions and the main challenges that are currently being tackled in this field.

Soft Materials for Wearable/Flexible Electrochemical Energy Conversion, Storage, and Biosensor Devices

Next-generation wearable technology needs portable flexible energy storage, conversion, and biosensor devices that can be worn on soft and curved surfaces. The conformal integration of these devices requires the use of soft, flexible, light materials, and substrates with similar mechanical properties as well as high performances. In this review, we have collected and discussed the remarkable research contributions of recent years, focusing the attention on the development and arrangement of soft and flexible materials (electrodes, electrolytes, substrates) that allowed traditional power sources and sensors to become viable and compatible with wearable electronics, preserving or improving their conventional performances.

Enzyme immobilisation on poly-l-lysine-containing calcium phosphate particles for highly sensitive glucose detection

High catalytic activities of enzymes are necessary for enzyme immobilising technology for the development of glucose sensors. The aim of this study is to synthesise two types of poly(l-lysine)-containing calcium phosphate particles (pLys-HAp) and to achieve the immobilisation of glucose oxidase (GOX) on them. The oxidation activity of GOX immobilised on these particles was more than 80% compared to that of native GOX (considered to be 100%). Additionally, the relative activity of GOX immobilised on poly-ε-lysine-containing HAp (ε-pLys-HAp) remained approximately 70% after ten cycles. Moreover, glucose detection was able to be performed in the linear range of 4–400 μM using GOX immobilised on pLys-HAp composites. In the direct electrochemistry measurement using the cyclic voltammetry (CV) method, a glassy carbon electrode (GCE) modified by ε-pLys-HAp was a good enzyme electrode and can be used for glucose detection with high sensitivity. From these results, poly(l-lysine)-containing HAp composites can be expected to be enzyme immobilisation agents with high stability and biosensors with high sensitivity.

The as-synthesised poly-l-lysine-containing HAp with high enzyme stability could be a candidate for a glucose sensor with high sensitivity.

Electrochemical Study of Enzymatic Glucose Sensors Biocatalyst: Thermal Degradation after Long-Term Storage

The thermal degradation related to stability in long-term storage of a carbon nanotube-based biosensor has been investigated. The effect of storage temperature on detachment and denaturation of glucose oxidase (GOx) biocatalyst has been proved. The carbon nanotubes (CNTs) coated with polyethyleneimine (PEI) as entrapping polymer to attract more GOx to form a durable and layered CNT/PEI/GOx structure is used for long-term storage to minimize GOx detachment from the structure and minimize the possibility of enzyme and protein denaturation. After 120 days, the glucose response of the CNT/PEI/GOx biosensor stored under 4°C is preserved up to 66.7% of its initial value, while under a 25 °C storage the response is maintained up to 41.7%. The enzyme coverage activity of CNT/PEI/GOx stored at 4 °C and 25 °C has decreased by 31.1% and 51.4%, respectively. Denaturation and detachment of GOx are the common causes of thermal degradation in biosensors under improper storage temperatures, but the presence of PEI in the structure can slow-down these phenomena. Moreover, the electrons transfer constant of CNT/PEI/GOx biocatalyst stored at 4 °C and 25 °C were 7.5 ± 0.5 s−1 and 6.6 ± 0.3 s−1, respectively, indicating that also electrons mobility is damaged by detachment and denaturation of enzyme protein and the detection of glucose from the glucose oxidation reaction (GOR) is compromised.

Vx3-Functionalized Alumina Nanoparticles Assisted Enrichment of Ubiquitinated Proteins from Cancer Cells for Enhanced Cancer Immunotherapy

A simple and effective strategy was developed to enrich ubiquitinated proteins (UPs) from cancer cell lysate using the α-Al₂O₃ nanoparticles covalently linked with ubiquitin binding protein (Vx3) (denoted as α-Al₂O₃-Vx3) via a chemical linker. The functionalized α-Al₂O₃-Vx3 showed long-term stability and high efficiency for the enrichment of UPs from cancer cell lysates. Flow cytometry analysis results indicated dendritic cells (DCs) could more effectively phagocytize the covalently linked α-Al₂O₃-Vx3-UPs than the physical mixture of α-Al₂O₃ and Vx3-UPs (α-Al₂O₃/Vx3-UPs). Laser confocal microscopy images revealed that α-Al₂O₃-Vx3-UPs localized within the autophagosome of DCs, which then cross-presented α-Al₂O₃-Vx3-UPs to CD8⁺ T cells in an autophagosome-related cross-presentation pathway. Furthermore, α-Al₂O₃-Vx3-UPs enhanced more potent antitumor immune response and antitumor efficacy than α-Al₂O₃/cell lysate or α-Al₂O₃/Vx3-UPs. This work highlights the potential of using the Vx3 covalently linked α-Al₂O₃ as a simple and effective platform to enrich UPs from cancer cells for the development of highly efficient therapeutic cancer vaccines.

Glucose oxidase and polyacrylic acid based water swellable enzyme-polymer conjugates for promoting glucose detection

Glucose oxidase (GOx) and polyacrylic acid (PAA) based water swellable non-toxic enzyme-polymer conjugate (PAA-GOx) was immobilized on a substrate consisting of graphene oxide (GO) and polyethyleneimine (PEI) (GO-PEI) and the electrochemical performances of the new catalyst were investigated. According to the measurements, although the amount of GOx immobilized on PAA-GOx was lower than that on glutaraldehyde (GA)-GOx, which is a conventionally used conjugate, its catalytic activity was 9.6 times higher than that of GA-GOx. The superior catalytic activity (102.0 μA cm^-2, 20 mM of glucose) and glucose sensitivity (6.9 μA cm^-2 mM^-1) were due to its high swellability in water. Due to this, the PAA-GOx absorbs a large amount of aqueous glucose molecules and rapidly transfers them to the active site of GOx. Desirable hydrogen peroxide and glucose oxidation reactions are accordingly promoted. In addition, since PAA has abundant free carboxylic acid groups, the PAA-GOx forms covalent bonds with the GO-PEI to curtail the leaching-out of GOx molecules.

Improvement Strategies, Cost Effective Production, and Potential Applications of Fungal Glucose Oxidase (GOD): Current Updates

Fungal glucose oxidase (GOD) is widely employed in the different sectors of food industries for use in baking products, dry egg powder, beverages, and gluconic acid production. GOD also has several other novel applications in chemical, pharmaceutical, textile, and other biotechnological industries. The electrochemical suitability of GOD catalyzed reactions has enabled its successful use in bioelectronic devices, particularly biofuel cells, and biosensors. Other crucial aspects of GOD such as improved feeding efficiency in response to GOD supplemental diet, roles in antimicrobial activities, and enhancing pathogen defense response, thereby providing induced resistance in plants have also been reported. Moreover, the medical science, another emerging branch where GOD was recently reported to induce several apoptosis characteristics as well as cellular senescence by downregulating Klotho gene expression. These widespread applications of GOD have led to increased demand for more extensive research to improve its production, characterization, and enhanced stability to enable long term usages. Currently, GOD is mainly produced and purified from Aspergillus niger and Penicillium species, but the yield is relatively low and the purification process is troublesome. It is practical to build an excellent GOD-producing strain. Therefore, the present review describes innovative methods of enhancing fungal GOD production by using genetic and non-genetic approaches in-depth along with purification techniques. The review also highlights current research progress in the cost effective production of GOD, including key advances, potential applications and limitations. Therefore, there is an extensive need to commercialize these processes by developing and optimizing novel strategies for cost effective GOD production.

Co-immobilization of glucose oxidase and catalase for enhancing the performance of a membraneless glucose biofuel cell operated under physiological conditions

Glucose oxidase (GOx)-catalase co-immobilized catalyst (CNT/PEI/(GOx-Cat)) was synthesized, and its catalytic activity and electrical performance were investigated and compared, whereas the amount of immobilized catalase was optochemically inspected by chemiluminescence (CL) assay. With the characterizations, it was confirmed that the catalase was well immobilized on the CNT/PEI surface, whereas both the GOx and catalase play their roles well in the catalyst. According to the measurements of the current density peak of the flavin adenine dinucleotide (FAD) redox reaction, electron transfer rate, Michaelis-Menten constants and sensitivity, CNT/PEI/(GOx-Cat) shows the best values, and this is attributed to the excellent catalytic activity of GOx and the H₂O₂ decomposition capability of the catalase. To evaluate the electrical performance, a membraneless glucose biofuel cell (GBFC) adopting the catalyst was operated under physiological conditions and produced a maximum power density (MPD) of 180.8 ± 22.3 μW cm^-2, which is the highest value compared to MPDs obtained by adoption of other catalysts. With such results, it was clarified that the CNT/PEI/(GOx-Cat) manufactured by co-immobilization of GOx and catalase leads to enhancements in the catalytic activity and GBFC performance due to the synergetic effects of (i) effective removal of harmful H₂O₂ moiety by catalase and (ii) superior activation of desirable reactions by GOx.

Yeast and carbon nanotube based biocatalyst developed by synergetic effects of covalent bonding and hydrophobic interaction for performance enhancement of membraneless microbial fuel cell

Membraneless microbial fuel cell (MFC) employing new microbial catalyst formed as yeast cultivated from Saccharomyces cerevisiae and carbon nanotube (yeast/CNT) is suggested. To analyze its catalytic activity and performance and stability of MFC, several characterizations are performed. According to the characterizations, the catalyst shows excellent catalytic activities by facile transfer of electrons via reactions of NAD, FAD, cytochrome c and cytochrome a3, while it induces high maximum power density (MPD) (344mW·m^-2). It implies that adoption of yeast induces increases in catalytic activity and MFC performance. Furthermore, MPD is maintained to 86% of initial value even after eight days, showing excellent MFC stability.

Fabrication of Mediatorless/Membraneless Glucose/Oxygen Based Biofuel Cell using Biocatalysts Including Glucose Oxidase and Laccase Enzymes

Mediatorless and membraneless enzymatic biofuel cells (EBCs) employing new catalytic structure are fabricated. Regarding anodic catalyst, structure consisting of glucose oxidase (GOx), poly(ethylenimine) (PEI) and carbon nanotube (CNT) is considered, while three cathodic catalysts consist of glutaraldehyde (GA), laccase (Lac), PEI and CNT that are stacked together in different ways. Catalytic activities of the catalysts for glucose oxidation and oxygen reduction reactions (GOR and ORR) are evaluated. As a result, it is confirmed that the catalysts work well for promotion of GOR and ORR. In EBC tests, performances of EBCs including 150 μm-thick membrane are measured as references, while those of membraneless EBCs are measured depending on parameters like glucose flow rate, glucose concentration, distance between two electrodes and electrolyte pH. With the measurements, how the parameters affect EBC performance and their optimal conditions are determined. Based on that, best maximum power density (MPD) of membraneless EBC is 102 ± 5.1 μW · cm(-2) with values of 0.5 cc · min(-1) (glucose flow rate), 40 mM (glucose concentration), 1 mm (distance between electrodes) and pH 3. When membrane and membraneless EBCs are compared, MPD of the membraneless EBC that is run at the similar operating condition to EBC including membrane is speculated as about 134 μW · cm(-2).