Hollow mesoporous raspberry-like colloids with removable caps as photoresponsive nanocontainers

Functionalization of Nanoparticulate Drug Delivery Systems and Its Influence in Cancer Therapy

Research into the application of nanocarriers in the delivery of cancer-fighting drugs has been a promising research area for decades. On the other hand, their cytotoxic effects on cells, low uptake efficiency, and therapeutic resistance have limited their therapeutic use. However, the urgency of pressing healthcare needs has resulted in the functionalization of nanoparticles' (NPs) physicochemical properties to improve clinical outcomes of new, old, and repurposed drugs. This article reviews recent research on methods for targeting functionalized nanoparticles to the tumor microenvironment (TME). Additionally, the use of relevant engineering techniques for surface functionalization of nanocarriers (liposomes, dendrimers, and mesoporous silica) and their critical roles in overcoming the current limitations in cancer therapy-targeting ligands used for targeted delivery, stimuli strategies, and multifunctional nanoparticles-were all reviewed. The limitations and future perspectives of functionalized nanoparticles were also finally discussed. Using relevant keywords, published scientific literature from all credible sources was retrieved. A quick search of the literature yielded almost 400 publications. The subject matter of this review was addressed adequately using an inclusion/exclusion criterion. The content of this review provides a reasonable basis for further studies to fully exploit the potential of these nanoparticles in cancer therapy.

A facile strategy for synthesis of porous Cu2O nanospheres and application as nanozymes in colorimetric biosensing

Due to the unique advantages, developing a rapid, simple and economical synthetic strategy for porous nanomaterials is of great interest. In this work, for the first time, using sodium hypochlorite as a green oxidant, urea was oxidized to CO2 as a carbon source to prepare the fine-particle crosslinked Cu-precursors, which could be further reduced by sodium ascorbate into pure Cu2O nanospheres (NPs) with a porous morphology at room temperature. Interestingly, our study reveals that introduction of an appropriate amount of MgCl2 into the raw materials can tune the pore sizes and surface area, but has no influence on the phase purity of the resulting Cu2O NPs. Significantly, all the synthesized Cu2O NPs exhibited intrinsic peroxidase-like activity with higher affinity towards both 3,3,5,5-tetramethylbenzidine (TMB) and H2O2 than horseradish peroxidase (HRP) due to the highly porous morphology and the electrostatic attraction towards TMB. The colorimetric detection of glucose based on the resulting porous Cu2O NPs presented a limit of detection (LOD) of 2.19 μM with a broad linear range from 1-1000 μM, much better than many recently reported composite-based nanozymes. Meanwhile, this nanozyme system was utilized to detect l-cysteine, exhibiting a LOD value as low as 0.81 μM within a linear range from 0 to 10 μM. More interesting, this sensing system shows high sensitivity and excellent selectivity in determining glucose and l-cysteine, which is suitable for detecting serum samples with reliable results. Therefore, the present study not only develops a simple strategy to prepare Cu2O NPs with controllable porous structure, but also indicates its promising applications in bioscience and disease diagnosis.

Unexpected phenomenon in a conventional system: synthesis of raspberry-like hollow periodic mesoporous organosilica with controlled structure in one continuous step

We put forward a facile method to fabricate raspberry-like hollow PMO with tunable morphology, derived from an interesting phenomenon in preparing conventional PMO.

Capping Silica Nanoparticles with Tryptophan-Mediated Cucurbit[8]uril Complex for Targeted Intracellular Drug Delivery Triggered by Tumor-Overexpressed IDO1 Enzyme

Nanosystems responsive to tumor-specific enzymes are considered as a highly attractive approach to intracellular drug release for targeted cancer therapy. Mesoporous silica nanoparticles are capped with tryptophan-mediated cucurbit[8]uril complex with Fe₃ O₄ to minimize the premature drug leakage while being able to deliver the payload on demand at the target tissue. The supramolecular interaction between tryptophan and cucurbit[8]uril is disrupted in the presence of indoleamine 2,3-dioxygenase 1 (IDO1) enzyme (abundant in the tumor intracellular microenvironment), which catalyzes the metabolism of tryptophan into N-formylkynurenine, resulting in the disassembly of the "gate-keeper" of the nanocarriers and intracellular release of therapeutics exclusively in tumor cells. The drug release from the nanocarrier with high selectivity to overexpressed IDO1 enzyme induces significant cytotoxicity against HepG2 cells in vitro, as well as the superior antitumor effects in vivo. This robust supramolecular nanosystem with sophisticated structure and property provides a promising platform for intracellular drug release targeting the intrinsic microenvironmental enzyme inside the tumor cells.

A dual-functional HER2 aptamer-conjugated, pH-activated mesoporous silica nanocarrier-based drug delivery system provides in vitro synergistic cytotoxicity in HER2-positive breast cancer cells

Purpose: As well as functioning as a ligand that is selectively internalized by cells overexpressing human epidermal growth factor receptor-2 (HER2), HApt can exert cytotoxic effects by inducing cross-linking and subsequent translocation of HER2 to cytoplasmic vesicles, such downregulation of HER2 inhibits cell proliferation and induces apoptosis. We aimed to exploit the potential of HApt as both a targeting agent and antagonist to maximize the efficacy of mesoporous silica nanoparticle (MSN)-based drug release systems for HER2-positive breast cancer. Materials and methods: We fabricated novel HApt aptamer-functionalized pH-sensitive β-cyclodextrin (β-CD)-capped doxorubicin (DOX)-loaded mesoporous silica nanoparticles (termed MSN-BM/CD-HApt@DOX) for targeted delivery and selective targeting of HER2-positive cells. MSN-functionalized benzimidazole (MSN-BM) was used to load and achieve pH stimuli-responsive release of the chemotherapeutic agent doxorubicin (DOX). β-cyclodextrin was introduced as a gatekeeper for encapsulated DOX and HApt as a selective HER2-targeting moiety and biotherapeutic agent. Results: Physical and chemical characterizations (FT-IR, XRD, TEM and BET) confirmed successful construction of MSN-BM/CD-HApt@DOX nanoparticles. In vitro release assays verified pH-sensitive DOX release. MSN-BM/CD-HApt@DOX (relative DOX concentration, 3.6 μg/mL) underwent HER2-mediated endocytosis and was more cytotoxic to HER2-positive SKBR3 cells than HER2-negative MCF7 cells. MSN-BM/CD-HApt@DOX also exhibited better uptake and stronger growth inhibition in SKBR3 cells than the control MSN-BM/CD-NCApt@DOX functionalized with a scrambled nucleotide sequence on CD. Overall, intracellular delivery of DOX and the biotherapeutic agent HApt resulted in synergistic cytotoxic effects in HER2-positive cancer cells in comparison to either DOX or HApt alone. Conclusion: MSN-BM/CD-HApt@DOX enables HER2-mediated targeting and biotherapeutic effects as well as pH-responsive DOX drug release, resulting in synergistic cytotoxic effects in HER2-overexpressing cells in vitro. This novel nanocarrier could potentially enable specific targeting to improve the efficacy of chemotherapy for HER2-positive cancer.

Functionalized mesoporous silica nanoparticles and biomedical applications

Since the first report in early 1990s, mesoporous silica nanoparticles (MSNs) have progressively attracted the attention of scientists due to their potential applications in physic, energy storage, imaging, and especially in biomedical engineering. Owning the unique physiochemical properties, such as highly porosity, large surface area and pore volume, functionalizable, tunable pore and particle sizes and biocompatibility, and high loading cavity, MSNs offer efficient encapsulation and then controlled release, and in some cases, intracellular delivery of bioactive molecules for biomedical applications. During the last decade, functionalized MSNs that show respond upon the surrounding stimulus changes, such as temperature, pH, redox, light, ultrasound, magnetic or electric fields, enzyme, redox, ROS, glucose, and ATP, or their combinations, have continuously revolutionized their potential applications in biomedical engineering. Therefore, this review focuses on discussion the recent fabrication of functionalized MSNs and their potential applications in drug delivery, therapeutic treatments, diagnostic imaging, and biocatalyst. In addition, some potential clinical applications and challenges will also be discussed.

Stimuli-Responsive Nanomachines and Caps for Drug Delivery

In this review we focus on methods that are used to trap and release on command therapeutic drugs from mesoporous silica nanoparticles (MSNs). The pores in the MSNs are large enough to accommodate a wide range of cargo molecules such as anticancer and antibiotic drugs and yet small enough to be blocked by a variety of bulky molecules that act as caps. The caps are designed to be tightly attached to the pore openings and trap the cargo molecules without leakage, but upon application of a designed stimulus detach from the nanoparticles and release the cargo. Of special emphasis in this review are nanomachines that respond to stimuli administered from external sources such as light or magnetic fields, or from chemical stimuli produced by the biological system such as a general change in pH or redox potential, or a highly specific chemical produced by a cancer cell or infectious bacterium. The goal is to release a high local concentration of the cargo only where and when it is needed, thus minimizing off-target side effects. We discuss sophisticated reversible nanomachines but also discuss some useful caps that simply break off from the nanoparticles in response to the selected stimulus. Many ingenious systems have been and are being designed; we primarily highlight those that have been demonstrated to operate in vitro and/or in vivo. In most cases the closed MSNs are endocytosed by diseased or infected cells and opened inside the cells to release the drugs. We begin with an overview of the nanoparticles and nanomachines and then present examples of drug release triggered by internal chemical stimuli from the organism and finally by external light and magnetic field stimuli.

Cucurbit[8]uril-Regulated Colloidal Dispersions Exhibiting Photocontrolled Rheological Behavior

In situ photocontrol over shear-thickening of condensed colloidal dispersions is of paramount importance in a wide range of applications including process technology and photorheological fluids. Its development and practicability, however, are hampered by the lack of well-designed photoresponsive systems. Here, a colloidal suspension whose rheological behavior is readily switchable between shear-thinning and shear-thickening using an external light stimulus is reported. This smart colloidal solution contains hybrid raspberry-like colloids prepared by employing cucurbit[8]uril as a supramolecular linker to assemble functional Fe₃ O₄ nanoparticles onto a silica core. The formed raspberry colloids are photoresponsive and can be reversibly disassembled under UV irradiation.

Molecular control over colloidal assembly

Contemporary chemical and material engineering often takes inspiration from nature, targeting for example strong yet light materials and materials composed of highly ordered domains at multiple different lengthscales for fundamental science and applications in e.g. sensing, catalysis, coating technology, and delivery. The preparation of such hierarchically structured functional materials through guided bottom-up assembly of synthetic building blocks requires a high level of control over their synthesis, interactions and assembly pathways. In this perspective we showcase recent work demonstrating how molecular control can be exploited to direct colloidal assembly into responsive materials with mechanical, optical or electrical properties that can be adjusted post-synthesis with external cues.

Light induced assembly and self-sorting of silica microparticles

To tailor the properties of colloidal materials, precise control over the self-assembly of their constituents is a prerequisite. Here, we govern the assembly of silica particles by functionalization with supramolecular moieties which interact with each other via directional and reversible hydrogen bonding. Through a generally applicable synthesis protocol, two different types of self-complementary hydrogen bonding moieties, BTA- and UPy-derivatives, are anchored to silica particles. Their self-assembly is initiated by the UV-induced removal of a photolabile protecting group, allowing the formation of hydrogen bonds between tethered molecules. The light-induced assembly of BTA- and UPy-decorated colloids in single-component dispersions and colloidal self-sorting in mixed dispersions is studied. Furthermore, we demonstrate that UPy-colloids can dissasemble upon addition of traces of a competitive binder (NaPy). This work provides further insight into the utility of supramolecular handles to orchestrate the assembly of micron-sized colloids via non-oligonucleotide hydrogen-bonding units.

Immobilization of a porphyrinic Mn(iii) catalyst on a new type of silica support comprising a three-dimensionally interconnected network with two different sizes of pores

A 3-D networked novel MPSM with pores of two distinct sizes has prepared and used as a support for a heterogeneous catalyst.

Molecular Recognition in the Colloidal World

Colloidal self-assembly is a bottom-up technique to fabricate functional nanomaterials, with paramount interest stemming from programmable assembly of smaller building blocks into dynamic crystalline domains and photonic materials. Multiple established colloidal platforms feature diverse shapes and bonding interactions, while achieving specific orientations along with short- and long-range order. A major impediment to their universal use as building blocks for predesigned architectures is the inability to precisely dictate and control particle functionalization and concomitant reversible self-assembly. Progress in colloidal self-assembly necessitates the development of strategies that endow bonding specificity and directionality within assemblies. Methodologies that emulate molecular and polymeric three-dimensional (3D) architectures feature elements of covalent bonding, while high-fidelity molecular recognition events have been installed to realize responsive reconfigurable assemblies. The emergence of anisotropic 'colloidal molecules', coupled with the ability to site-specifically decorate particle surfaces with supramolecular recognition motifs, has facilitated the formation of superstructures via directional interactions and shape recognition. In this Account, we describe supramolecular assembly routes to drive colloidal particles into precisely assembled architectures or crystalline lattices via directional noncovalent molecular interactions. The design principles are based upon the fabrication of colloidal particles bearing surface-exposed functional groups that can undergo programmable conjugation to install recognition motifs with high fidelity. Modular and versatile by design, our strategy allows for the introduction and integration of molecular recognition principles into the colloidal world. We define noncovalent molecular interactions as site-specific forces that are predictable (i.e., feature selective and controllable complementary bonding partners) and can engage in tunable high-fidelity interactions. Examples include metal coordination and host-guest interactions as well as hydrogen bonding and DNA hybridization. On the colloidal scale, these interactions can be used to drive the reversible formation of open structures. Key to the design is the ability to covalently conjugate supramolecular motifs onto the particle surface and/or noncovalently associate with small molecules that can mediate and direct assembly. Efforts exploiting the binding strength inherent to DNA hybridization for the preparation of reversible open-packed structures are then detailed. We describe strategies that led to the introduction of dual-responsive DNA-mediated orthogonal assembly as well as colloidal clusters that afford distinct DNA-ligated close-packed lattices. Further focus is placed on two essential and related efforts: the engineering of complex superstructures that undergo phase transitions and colloidal crystals featuring a high density of functional anchors that aid in crystallization. The design principles discussed in this Account highlight the synergy stemming from coupling well-established noncovalent interactions common on the molecular and polymeric length scales with colloidal platforms to engineer reconfigurable functional architectures by design. Directional strategies and methods such as those illustrated herein feature molecular control and dynamic assembly that afford both open-packed 1D and 2D lattices and are amenable to 3D colloidal frameworks. Multiple methods to direct colloidal assembly have been reported, yet few are capable of crystallizing 2D and 3D architectures of interest for optical data storage, electronics, and photonics. Indeed, early implications are that [supra]molecular control over colloidal assembly can fabricate rationally structured designer materials from simple fundamental building blocks.

Recent Advances in Stimuli-Responsive Release Function Drug Delivery Systems for Tumor Treatment

Benefiting from the development of nanotechnology, drug delivery systems (DDSs) with stimuli-responsive controlled release function show great potential in clinical anti-tumor applications. By using a DDS, the harsh side effects of traditional anti-cancer drug treatments and damage to normal tissues and organs can be avoided to the greatest extent. An ideal DDS must firstly meet bio-safety standards and secondarily the efficiency-related demands of a large drug payload and controlled release function. This review highlights recent research progress on DDSs with stimuli-responsive characteristics. The first section briefly reviews the nanoscale scaffolds of DDSs, including mesoporous nanoparticles, polymers, metal-organic frameworks (MOFs), quantum dots (QDs) and carbon nanotubes (CNTs). The second section presents the main types of stimuli-responsive mechanisms and classifies these into two categories: intrinsic (pH, redox state, biomolecules) and extrinsic (temperature, light irradiation, magnetic field and ultrasound) ones. Clinical applications of DDS, future challenges and perspectives are also mentioned.

Characterization of nanoporous structures: from three dimensions to two dimensions

The scanning electron microscope (SEM) has revealed a colorful three-dimensional world due to its great depth of field. However, the abundance of structural information imposes tough challenges to quantitative image analysis. In the current investigation, we developed a SEM-image polishing (SIP) based quantitative SEM-image analysis (QSIA) technique. As an example, QSIA was employed to characterize nanoporous silica. The results confirmed that the nanoporous silica samples, processed via sol-gel methods, were single-parameter, with the pore size being the only variable. The QSIA technique may pave the way to fast and accurate data mining of nanoscaled materials.

Dual pH-Mediated Mechanized Hollow Zirconia Nanospheres

We demonstrate for the first time how to assemble mechanized hollow zirconia nanospheres (MHzNs), consisting of hollow mesoporous zirconia nanospheres (HMZNs) as nanoscaffolds and supramolecular switches anchored on the exterior surface of HMZNs. The remarkable advantage of substitution of HMZNs for conventional mesoporous silica nanoscaffolds is that HMZNs can suffer the hot alkaline reaction environment, which provides a novel strategy for functionalization and thus achieve dual pH-mediated controlled release functions by simple and practicable assembly procedure. Under neutral solution, cucurbituril[7] (CB[7]) macrocycles complexed with propanone bis(2-aminoethyl)ketal (PBAEK) to form [2]pseudorotaxanes as supramolecular switches, blocking the pore orifices and preventing the undesirable leakage of cargoes. When solution pH was adjusted to alkaline range, CB[7] macrocycles, acting as caps, disassociated from PBAEK stalks and opened the switches due to the dramatic decrease of ion-dipole interactions. While under acidic conditions, PBAEK stalks were broken on account of the cleavage of ketal groups, resulting in the collapse of supramolecular switches and subsequent release of encapsulated cargoes. MHzNs owning dual pH-mediated controlled release characteristic are expected to apply in many fields. In this work, the feasibility of doxorubicin (DOX)-loaded MHzNs as targeted drug delivery systems was evaluated. In vitro cellular studies demonstrate that DOX-loaded MHzNs can be easily taken up by SMMC-7721 cells, can rapidly release DOX intracellularly, and can enhance cytotoxicity against tumor cells, proving their potential for chemotherapy.