Chitosan-based hydrogel beads with molecularly imprinted receptors on halloysite nanotubes for tetracycline separation in water and soil

Tetracycline (TC), a commonly utilized broad-spectrum antibiotic, is frequently detected in water and soil, posing a significant risk to the natural environment and human health. In the present study, the composite hydrogel beads based on chitosan (CS) and halloysite-supported molecularly imprinted polymers, synthesized by two procedures with significantly different solvent volumes (Hal@MIPa(b)), were obtained and used to adsorb the antibiotic. The presence of Hal improved the thermal stability of the hydrogel beads. The system with a thinner polymer layer (CS_Hal@MIPb), containing polymers produced under conditions of significantly higher reagent dilution, was more resistant to higher temperatures than CS_Hal@MIPa. The adsorptive properties were compared with pure CS beads, those containing incorporated Hal, and free polymers obtained by different protocols (MIPa(b)). In the optimized pH 5.0, the maximum adsorption capacities were 175.24 and 178.05 mg g-1 for CS_Hal@MIPa and CS_Hal@MIPb, respectively. The values were slightly lower compared to the systems with free polymers, but the materials achieved equilibrium more rapidly (12 h). The adsorption process was spontaneous and exothermic. Freundlich isotherm and pseudo-second-order kinetic models most accurately described the experimental data. The hydrogel beads retained high selectivity in the presence of other antibiotics, and their high efficiency in the TC removal from real water samples was maintained. Their addition to soil enhanced adsorption capacities, surpassing that of chitosan-based beads containing free polymers. Significantly, the quantity of TC desorption diminished due to the halloysite's presence, which limited its penetration into groundwater. The primary mechanism of tetracycline adsorption on the hydrogel beads studied is pore filling, but other interactions (hydrogen bonding, π-π stacking, electrostatic attraction) are also involved.

Recent advances in the removal of emerging contaminants from water by novel molecularly imprinted materials in advanced oxidation processes-A review

Recently, there has been a global focus on effectively treating emerging contaminants (ECs) in water bodies. Advanced oxidation processes (AOPs) are the primary technology used for ECs removal. However, the low concentrations of ECs make it difficult to overcome the interference of background substances in complex water quality, which limits the practical application of AOPs. To address this limitation, many researchers are developing new catalysts with preferential adsorption. Molecular imprinting technology (MIT) combined with conventional catalysts has been found to effectively enhance the selectivity of catalysts for the targeted catalytic degradation of pollutants. This review presents a comprehensive summary of the progress made in research on molecularly imprinted polymers (MIPs) in the selective oxidation of ECs in water. The preparation methods, principles, and control points of novel MIP catalysts are discussed. Furthermore, the performance and mechanism of the catalysts in photocatalytic oxidation, electrocatalytic oxidation, and persulfate activation are analyzed with examples. The possible ecotoxicological risks of MIP catalysts are also discussed. Finally, the challenges and prospects of applying MIP catalysts in AOP are presented along with proposed solutions. This review provides a better understanding of using MIP catalysts in AOPs to target the degradation of ECs.

A descriptive and comparative analysis on the adsorption of PPCPs by molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) have aroused great attention as a new material for the removal or detection of pharmaceuticals and personal care products (PPCPs). However, it is not clear about the superiority and deficiency of MIPs in the process of removing or detecting PPCPs. Herein, we evaluated the performance of MIPs in the aspects of adsorption capacity, binding affinity, adsorption rate, and compatibility to other techniques, and proposed ways to improve its performance. Without regard to the selectivity of MIPs, for the PPCPs adsorption, MIPs surprisingly did not always perform better than the conventional adsorbents (non-imprinted polymers, biochar, activated carbon and resin), indicating that MIPs should be used where selectivity is crucial, for example recovery of specific PPCPs in an environmental sample extraction process. Compared to the traditional solid-phase extraction for PPCPs detection pretreatment, the usage of MIPs as substitute extraction agents could obtain high selectivity of specific substance, due to the uniformity and effectiveness of the specific sites. A promising development in the future would be to combine other simple and rapid quantitative technologies, such as electro/photochemical sensor and catalytic degradation, to realize rapid and sensitive detection of trace PPCPs.

Hollow porous molecularly imprinted polymers as emerging adsorbents

Hollow porous molecularly imprinted polymers (HPMIPs) are identified as promising adsorbents with many advantageous properties (e.g., large number of imprinted cavities, highly accessible binding sites, controllable pore structure, and fast mass transfer). Because of such properties, HPMIPs can exhibit improved binding capacity and kinetics to make analyte molecules readily interact with a greater number of recognition sites on the imprinted shell. This review highlights the synthesis and utility of HPMIPs as adsorbents to cover diverse targets of interest (e.g., endocrine disrupting chemicals, pharmaceuticals, pesticides, and heavy metal ions). The overall potential of HPMIPs is thus discussed in the context of analytical chemistry with particular focus on the efficient extraction of trace-level targets from complex matrices.

A Note about Crosslinking Density in Imprinting Polymerization

Imprinting polymerization is an exciting technique since it leads to specific binding sites, which are the basis of a variety of applications, such as sensors, detectors, and catalysts. The specific binding sites are created using templates and then fixing the structure of the binding site with crosslinking. The literature review of imprinting polymerizations shows that the crosslinking density governs the physical properties of the resulting molecularly imprinted polymer (MIP). It is also a factor governing the capacity and the selectivity of MIPs. Reviewing polymer science data and theory, the crosslinking density commonly used in MIP synthesis is unusually high. The data reviewed here suggest that more research is needed to determine the optimal crosslinking density for MIPs.

Simple and Efficient Detection Approach of Quercetin from Biological Matrix by Novel Surface Imprinted Polymer Based Magnetic Halloysite Nanotubes Prepared by a Sol-Gel Method

Molecular imprinted polymers coated magnetic halloysite nanotubes (MHNTs-MIPs) were prepared through sol-gel method by using quercetin (Que), APTES and TEOS as template, monomer and cross-linker agent, respectively. The synthesized MHNTs-MIPs were characterized by fourier transform infrared, scanning electron microscope, transmission electron microscope, XRD and vibrating sample magnetometer. Various parameters influencing the binding capacity of the MHNTs-MIPs were investigated with the help of response surface methodology. Selectivity experiments showed that the MHNTs-MIPs exhibited the maximum selective rebinding to Que. Therefore, the MHNTs-MIPs was applied as a solid-phase extraction adsorbent for the extraction and preconcentration of quercetin and luteolin in serum and urine samples. The limits of detection for quercetin and luteolin range from 0.51 to 1.32 ng mL-1 in serum and from 0.23 to 1.05 ng mL-1 in urine, the recoveries are between 95.20 and 103.73% with the RSD less than 5.77%. While the recovery hardly decreased after several cycles. The designed MHNTs-MIP with high affinity, sensitivity and maximum selectivity toward Que in SPE might recommend a novel method for the extraction of flavonoids in other samples like natural products.

Innovative utilization of molecular imprinting technology for selective adsorption and (photo)catalytic eradication of organic pollutants

The rapid development of industrialization and urbanization results in a numerous production of various organic chemicals to meet the increasing demand in high-quality life. During the synthesis and utilization of these chemical products, their residues unavoidably emerged in environments to severely threaten human's health. It is thus urgent to exploit effective technology for readily removing the organic pollutants with high selectivity and good reusability. As one of the most promising approaches, molecular imprinting technology (MIT) employs a chemically synthetic route to construct artificial recognition sites in highly-crosslinked matrix with complementary cavity and functional groups to target species, which have been attracting more and more interest for environmental remediation, such as the selective adsorption/separation and improved catalytic degradation of pollutants. In this review, MIT is first introduced briefly to understand their preparing process, recognition mechanism and common imprinted systems. Then, their specific binding affinities are demonstrated for selectively adsorbing and removing target molecules with a large capacity. Furthermore, the innovative utilization of MIT in catalytic eradication of pollutants is comprehensively overviewed to emphasize their enhanced efficiency and improved performances, which are classified by the used catalytically-active nanocrystals and imprinted systems. After summarizing recent advances in these fields, some limitations are discussed and possible suggestions are given to guide the future exploitation on MIT for environmental protection.

Bowl-Shaped Polydopamine Nanocapsules: Control of Morphology via Template-Free Synthesis

Synthesis of hollow polydopamine bowl-shaped nanoparticles (nanobowls), as small as 80 nm in diameter, via a one-pot template-free rapid method is reported. Addition of dopamine to a solution of 0.606 mg/mL tris(hydroxymethyl)aminomethane in an ethanol/water mixed solvent resulted in the formation of hollow spherical nanocapsules within 2 h. At longer reaction times, the formation of conventional solid nanospheres dominated the reaction. The wall thickness of the nanocapsules increased with increasing dopamine concentration in the reaction medium. Wall thickness was also influenced by oxygen availability during the reaction. Nanocapsules with thin walls were prone to collapse. When dried, over 90% of the nanocapsules with wall thickness on the order of 11 nm collapsed. Also, the degree of collapse of individual nanoparticles changed from complete to partial to no collapse as the wall thickness was increased. Varying the ethanol content affected the cavity size and overall dimension of the nanocapsules produced but did not result in a significant change to the wall thickness. A mechanism describing the formation of the nanocapsules and their subsequent collapse into nanobowls is presented. The shape-tunable nanobowls prepared through this green, rapid, and affordable method are expected to have applications in the biomedical, electrochemical, and catalytic fields.

Removal of sulfonamide antibiotics from water by high-silica ZSM-5

Adsorption characteristics of high-silica zeolites (HSZSM-5) for two selected sulfonamide antibiotics (SAs) (sulfamethoxazole and sulfadiazine) were investigated. The SAs were almost completely (>90%) removed from the water by HSZSM-5. Adsorption followed second-order kinetics with liquid-film diffusion as the dominant mechanism. SA adsorption capacity on high-silica zeolites was examined in terms of pH, temperature, and the presence of natural organic matter (NOM). HSZSM-5 had better adsorption performance in acidic conditions, and the apparent distribution coefficient indicated that SA⁰ species were the major contribution to the overall adsorption at pH of 2-10. Adsorption of SAs on HSZSM-5 was a spontaneous and exothermic physisorption process. SA removal by HSZSM-5 was a mixed mechanism through ion-exchange and hydrophobic interaction. HSZSM-5 has potential application prospects in removing SAs from wastewater.

Facile fabrication of polydopamine nanotubes for combined chemo-photothermal therapy

Polydopamine nanoparticles with higher drug loading capacity and enhanced photothermal behavior.

Halloysite nanotubes in analytical sciences and in drug delivery: A review

Halloysite (HNT) is a natural inorganic mineral that has many applications in manufacturing. This review (with 192 references) covers (a) the chemical properties of halloysites, (b) the effects of alkali and acid etching on the loading capacity and the release behavior of halloysites, (c) the use of halloysite nanotubes in analytical sciences and drug delivery, and (d) recent trends in the preparation of magnetic HNTs. Synthetic methods such as co-precipitation, thermal decomposition, and solvothermal method are discussed, with emphasis on optimal magnetization. In the analytical field, recent advancements are summarized in terms of applications of HNT-nanocomposites for extraction and detection of heavy metal ions, dyes, organic pollutants, and biomolecules. The review also covers methods for synthesizing molecularly imprinted polymer-modified HNTs and magnetic HNTs. With respect to drug delivery, the toxicity, techniques for drug loading and the various classes of drug-halloysite nanocomposites are discussed. This review gives a general insight on the utilization of HNT in analytical determination and drug delivery systems which may be useful for researchers to generate new ideas. Graphical abstract Schematic presentation of the structure of halloysite nanotubes, selected examples of modifications and functionalization, and represetative field of applications.

Hollow polymer nanocapsules: synthesis, properties, and applications

Hollow polymer nanocapsules (HPNs) have gained tremendous interest in recent years due to their numerous desirable properties compared to their solid counterparts.

Fabrication of lithium ion imprinted hybrid membranes with antifouling performance for selective recovery of lithium

The LIHMs showed a distinctive adsorption capacity (27.10 mg g⁻¹) and permselectivity (β_K/Li = 5.3780, β_Ca/Li = 21.9402, β_Mg/Li = 15.5620) for Li⁺, which resulted from the effect of the special imprinted sites.

Synthesis of cauliflower-like ion imprinted polymers for selective adsorption and separation of lithium ion

Cauliflower-like Li-IIPs were prepared for selective adsorption and separation of Li⁺, showing distinctive adsorption capacity of 1.135 mmol g⁻¹.

Competitive sorption affinity of sulfonamides and chloramphenicol antibiotics toward functionalized biochar for water and wastewater treatment

Competitive sorption of sulfamethazine (SMT), sulfamethoxazole (SMX), sulfathiazole (STZ) and chloramphenicol (CP) toward functionalized biochar (fBC) was highly pH dependent with maximum sorption at pH ∼4.0-4.25. Equilibrium data were well represented by the Langmuir and Freundlich models in the order STZ>SMX>CP>SMT. Kinetics data were slightly better fitted by the pseudo second-order model than pseudo first-order and intra-particle-diffusion models. Maximum sorptive interactions occurred at pH 4.0-4.25 through H-bonds formations for neutral sulfonamides species and through negative charge assisted H-bond (CAHB) formation for CP, in addition to π-π electron-donor-acceptor (EDA) interactions. EDA was the main mechanism for the sorption of positive sulfonamides species and CP at pH<2.0. Sorption of negative sulfonamides species and CP at pH>7.0 was regulated by H-bond formation and proton exchange with water by forming CAHB, respectively. The results suggested fBC to be highly efficient in removing antibiotics mixture.