Achievement of visible-light-driven Z-scheme overall water splitting using barium-modified Ta3N5 as a H2-evolving photocatalyst

Interfacial Design of Particulate Photocatalyst Materials for Green Hydrogen Production

Green hydrogen production using particulate photocatalyst materials has attracted much attention in recent years because this process could potentially lead to inexpensive and scalable solar-to-chemical energy conversion systems. Although the development of efficient particulate photocatalysts enabling one-step overall water splitting (OWS) with solar-to-hydrogen efficiencies in excess of 10 % remains challenging, promising photocatalyst candidates exhibiting OWS activity have been demonstrated. This review provides a comprehensive introduction to the solar-to-hydrogen energy conversion process of semiconductor photocatalyst materials and highlights recent advances in photocatalytic OWS via both one-step and two-step photoexcitation processes. The review also covers recent developments in the photocatalytic OWS of SrTiO3, including the establishment of large-scale photocatalytic systems, interfacial design using cocatalysts to enhance water splitting activity, and its photoelectrochemical (PEC) properties at the electrified solid/liquid interface. In addition, there is a special focus on visible-light-absorbing oxynitride and oxysulfide particulate photocatalysts with absorption edges near 600 nm. Methods for photocatalyst preparation and surface modification, as well as PEC properties, are also discussed. The semiconductor properties of particulate photocatalysts obtained from photoelectroanalytical evaluations using particulate photoelectrodes are evaluated. This review is intended to provide guidelines for the future development of particulate photocatalysts capable of efficient and stable OWS.

Recent Advances in Redox-Based Z-Scheme Overall Water Splitting under Visible Light Irradiation

Photocatalytic overall water splitting (OWS) using suspended particulate photocatalysts to produce green hydrogen has inspired continuous interest due to its low cost for easy large-scale application. The two-step photoexcitation system (Z-scheme) mimicking natural photosynthesis was proposed to efficiently use visible light for realization of efficient conversion of solar irradiation. In this Perspective, we will introduce recent advances in redox-based Z-scheme OWS systems, including iodine-based, iron-based, metal complex-based, and other special ion redox couples. The advantages and challenges of each couple and the factors affecting the Z-scheme OWS efficiency are discussed in detail. Finally, the challenges and feasible solutions for the achievement of highly efficient Z-scheme OWS are then outlined. This Perspective provides guidance on how to construct a Z-scheme OWS system and enhance photocatalytic performance.

Recent developments, advances and strategies in heterogeneous photocatalysts for water splitting

Photocatalytic water splitting (PWS) is an up-and-coming technology for generating sustainable fuel using light energy. Significant progress has been made in the developing of PWS innovations over recent years. In addition to various water-splitting (WS) systems, the focus has primarily been on one- and two-steps-excitation WS systems. These systems utilize singular or composite photocatalysts for WS, which is a simple, feasible, and cost-effective method for efficiently converting prevalent green energy into sustainable H2 energy on a large commercial scale. The proposed principle of charge confinement and transformation should be implemented dynamically by conjugating and stimulating the photocatalytic process while ensuring no unintentional connection at the interface. This study focuses on overall water splitting (OWS) using one/two-steps excitation and various techniques. It also discusses the current advancements in the development of new light-absorbing materials and provides perspectives and approaches for isolating photoinduced charges. This article explores multiple aspects of advancement, encompassing both chemical and physical changes, environmental factors, different photocatalyst types, and distinct parameters affecting PWS. Significant factors for achieving an efficient photocatalytic process under detrimental conditions, (e.g., strong light absorption, and synthesis of structures with a nanometer scale. Future research will focus on developing novel materials, investigating potential synthesis techniques, and improving existing high-energy raw materials. The endeavors aim is to enhance the efficiency of energy conversion, the absorption of radiation, and the coherence of physiochemical processes.

Perovskite BaTaO2 N: From Materials Synthesis to Solar Water Splitting

Barium tantalum oxynitride (BaTaO2 N), as a member of an emerging class of perovskite oxynitrides, is regarded as a promising inorganic material for solar water splitting because of its small band gap, visible light absorption, and suitable band edge potentials for overall water splitting in the absence of an external bias. However, BaTaO2 N still exhibits poor water-splitting performance that is susceptible to its synthetic history, surface states, recombination process, and instability. This review provides a comprehensive summary of previous progress, current advances, existing challenges, and future perspectives of BaTaO2 N for solar water splitting. A particular emphasis is given to highlighting the principles of photoelectrochemical (PEC) water splitting, classic and emerging photocatalysts for oxygen evolution reactions, and the crystal and electronic structures, dielectric, ferroelectric, and piezoelectric properties, synthesis routes, and thin-film fabrication of BaTaO2 N. Various strategies to achieve enhanced water-splitting performance of BaTaO2 N, such as reducing the surface and bulk defect density, engineering the crystal facets, tailoring the particle morphology, size, and porosity, cation doping, creating the solid solutions, forming the heterostructures and heterojunctions, designing the photoelectrochemical cells, and loading suitable cocatalysts are discussed. Also, the avenues for further investigation and the prospects of using BaTaO2 N in solar water splitting are presented.

Transition-metal (oxy)nitride photocatalysts for water splitting

Solar-driven water splitting based on particulate semiconductor materials is studied as a technology for green hydrogen production. Transition-metal (oxy)nitride photocatalysts are promising materials for overall water splitting (OWS) via a one- or two-step excitation process because their band structure is suitable for water splitting under visible light. Yet, these materials suffer from low solar-to-hydrogen energy conversion efficiency (STH), mainly because of their high defect density, low charge separation and migration efficiency, sluggish surface redox reactions, and/or side reactions. Their poor thermal stability in air and under the harsh nitridation conditions required to synthesize these materials makes further material improvements difficult. Here, we review key challenges in the two different OWS systems and highlight some strategies recently identified as promising for improving photocatalytic activity. Finally, we discuss opportunities and challenges facing the future development of transition-metal (oxy)nitride-based OWS systems.

Tungsten Oxide-Based Z-Scheme for Visible Light-Driven Hydrogen Production from Water Splitting

The stoichiometric water splitting using a solar-driven Z-scheme approach is an emerging field of interest to address the increasing renewable energy demand and environmental concerns. So far, the reported Z-scheme must comprise two populations of photocatalysts. In the present work, only tungsten oxides are used to construct a robust Z-scheme system for complete visible-driven water splitting in both neutral and alkaline solutions, where sodium tungsten oxide bronze (Na_0.56WO_3-x) is used as a H₂ evolution photocatalyst and two-dimensional (2D) tungsten trioxide (WO₃) nanosheets as an O₂ evolution photocatalyst. This system efficiently produces H₂ (14 μmol h^-1) and O₂ (6.9 μmol h^-1) at an ideal molar ratio of 2:1 in an aqueous solution driven by light, resulting in a remarkably high apparent quantum yield of 6.06% at 420 nm under neutral conditions. This exceptional selective H₂ and O₂ production is due to the preferential adsorption of iodide (I^-) on Na_0.56WO_3-x and iodate (IO₃^-) on WO₃, which is evidenced by both experiments and density functional theory calculation. The present liquid Z-scheme in the presence of efficient shuttle molecules promises a separated H₂ and O₂ evolution by applying a dual-bed particle suspension system, thus a safe photochemical process.

A perspective on two pathways of photocatalytic water splitting and their practical application systems

Photocatalytic water splitting has been widely studied as a means of converting solar energy into hydrogen as an ideal energy carrier in the future. Systems for photocatalytic water splitting can be divided into one-step excitation and two-step excitation processes. The former uses a single photocatalyst while the latter uses a pair of photocatalysts to separately generate hydrogen and oxygen. Significant progress has been made in each type of photocatalytic water splitting system in recent years, although improving the solar-to-hydrogen energy conversion efficiency and constructing practical technologies remain important tasks. This perspective summarizes recent advances in the field of photocatalytic overall water splitting, with a focus on the design of photocatalysts, co-catalysts and reaction systems. The associated challenges and potential approaches to practical solar hydrogen production via photocatalytic water splitting are also presented.

2D-2D heterostructure g-C3N4-based materials for photocatalytic H2 evolution: Progress and perspectives

Photocatalytic hydrogen generation from direct water splitting is recognized as a progressive and renewable energy producer. The secret to understanding this phenomenon is discovering an efficient photocatalyst that preferably uses sunlight energy. Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄)-based materials are promising for photocatalytic water splitting due to special characteristics such as appropriate band gap, visible light active, ultra-high specific surface area, and abundantly exposed active sites. However, the inadequate photocatalytic activity of pure 2D layered g-C₃N₄-based materials is a massive challenge due to the quick recombination between photogenerated holes and electrons. Creating 2D heterogeneous photocatalysts is a cost-effective strategy for clean and renewable hydrogen production on a larger scale. The 2D g-C₃N₄-based heterostructure with the combined merits of each 2D component, which facilitate the rapid charge separation through the heterojunction effect on photocatalyst, has been evidenced to be very effective in enhancing the photocatalytic performance. To further improve the photocatalytic efficiency, the development of novel 2D g-C₃N₄-based heterostructure photocatalysts is critical. This mini-review covers the fundamental concepts, recent advancements, and applications in photocatalytic hydrogen production. Furthermore, the challenges and perspectives on 2D g-C₃N₄-based heterostructure photocatalysts demonstrate the future direction toward sustainability.

A review on the preparation, microstructure, and photocatalytic performance of Bi2O3 in polymorphs

In recent years, the semiconductor bismuth oxide (Bi₂O₃) has attracted increasing attention as a potential visible-light-driven photocatalyst due to its simple composition, relatively narrow bandgap (2.2-2.8 eV), and high oxidation ability with deep valence band levels. Owing to the symmetry of its unit cell, Bi₂O₃ exists in more than one crystal form and exhibits phase-dependent photocatalytic properties. However, the phase-selective synthesis of Bi₂O₃ is a complex process, and its phase transformation usually occurs in a wide temperature range. Therefore, the development of Bi₂O₃ phases with a controllable microstructure and good photocatalytic properties is a great challenge. Hundreds of articles have been reported on the phase-selective synthesis and photocatalytic performance of Bi₂O₃. However, an interacting and critical review has rarely been reported, and thus it is essential to fill the gap in the literature. In this review, the phase-dependent photocatalytic performance of Bi₂O₃ is presented in detail. The phase-selective synthesis and temperature-dependent phase stability of highly active Bi₂O₃ are explored. The phase junction in Bi₂O₃ is reviewed, and the future perspective with an outlook on contemporary challenges is provided finally.

Surface Modifications of (ZnSe)0.5(CuGa2.5Se4.25)0.5 to Promote Photocatalytic Z-Scheme Overall Water Splitting

Charge separation is crucial for an efficient artificial photosynthetic process, especially for narrow-bandgap metal sulfides/selenides. The present study demonstrates the application of a p-n junction to particulate metal selenides to enhance photocatalytic Z-scheme overall water splitting (OWS). The constructed p-n junction of CdS-(ZnSe)_0.5(CuGa_2.5Se_4.25)_0.5 significantly boosted charge separation. A thin TiO₂ coating layer also was introduced to inhibit photocorrosion of CdS and suppress the backward reaction of water formation from hydrogen and oxygen. By employing Pt-loaded TiO₂/CdS-(ZnSe)_0.5(CuGa_2.5Se_4.25)_0.5 as a hydrogen evolution photocatalyst (HEP), we assembled a Z-scheme OWS system, together with BiVO₄:Mo and Au as an oxygen evolution photocatalyst and electron mediator, respectively. An apparent quantum yield of 1.5% at 420 nm was achieved, which is by far the highest among reported particulate photocatalytic Z-scheme OWS systems with metal sulfides/selenides as HEPs. The present work demonstrates that a well-tailored p-n junction structure is effective for promoting charge separation in photocatalysis and opens new pathways for the development of efficient artificial photosynthesis systems involving narrow bandgap photocatalysts.

Nanostructure Engineering and Modulation of (Oxy)Nitrides for Application in Visible-Light-Driven Water Splitting

(Oxy)nitride-based nanophotocatalysts have been extensively investigated for solar-to-chemical conversion, and not only allow wide spectral utilization to achieve high theoretical energy conversion efficiency but also exhibit suitable conduction and valence band positions for robust reduction and oxidation of water. During the past decades, a few reviews on the research progress in designing and synthesizing new visible-light-responsive semiconductors for various applications in solar-to-chemical conversion have been published. However, those on the effects of their bulk and composite (surface/interface) nanostructures on basic processes as well as solar water splitting performances to produce hydrogen are still limited. In this review, a brief introduction on the relationship between the nanostructure photocatalytic properties is included. Three main processes of solar water splitting are involved, allowing the elucidation of the correlation with the nanostructural properties of the photocatalyst such as surface/interface, size, morphology, and bulk structure. Subsequently, the development of methodologies and strategies for modulating the bulk and composite structures to improve the efficiencies of the basic processes, particularly charge separation, is summarized in detail. Finally, the prospects of (oxy)nitride-based photocatalysts such as controlled synthesis, modulation of 1D/2D morphology, exposed facet regulation, heterostructure formation, theoretical simulation, and time- and space-resolved spectroscopy are discussed.

Simultaneously Tuning the Defects and Surface Properties of Ta3N5 Nanoparticles by Mg-Zr Codoping for Significantly Accelerated Photocatalytic H2 Evolution

The simultaneous control of the defect species and surface properties of semiconducting materials is a crucial aspect of improving photocatalytic performance, yet it remains challenging. Here, we synthesized Mg-Zr-codoped single-crystalline Ta₃N₅ (Ta₃N₅:Mg+Zr) nanoparticles by a brief NH₃ nitridation process, exhibiting photocatalytic water reduction activity 45 times greater than that of pristine Ta₃N₅ under visible light. A coherent picture of the relations between the defect species (comprising reduced Ta, nitrogen vacancies and oxygen impurities), surface properties (associated with dispersion of the Pt cocatalyst), charge carrier dynamics, and photocatalytic activities was drawn. The tuning of defects and simultaneous optimization of surface properties resulting from the codoping evidently resulted in the generation of high concentrations of long-lived electrons in this material as well as the efficient migration of these electrons to evenly distributed surface Pt sites. These effects greatly enhanced the photocatalytic activity. This work highlights the importance and feasibility of improving multiple properties of a catalytic material via a one-step strategy.

Hollow Multishelled Structured SrTiO3 with La/Rh Co-Doping for Enhanced Photocatalytic Water Splitting under Visible Light

La- and Rh-co-doped SrTiO₃ (STO:La/Rh) hollow multishelled structures (HoMSs) are fabricated by adding La³⁺ and Rh³⁺ ions during the hydrothermal process of converting TiO₂ HoMSs to STO HoMSs. STO:La/Rh HoMSs have successfully expanded the light absorption edge to 520 nm. Accompanied with the benefits of the unique hierarchical structure and relatively thin shells, STO:La/Rh HoMSs exhibit elevated light-harvesting capacity and charge separation efficiency. Compared with STO:La/Rh nanoparticles (NPs), STO:La/Rh HoMSs demonstrate enhanced photocurrent response, photocatalytic hydrogen evolution activity, and the quantum efficiency. Moreover, overall water splitting is realized by a Z-scheme system combining STO:La/Rh HoMSs with BiVO₄ (BVO) nanosheets with 1 wt% Pt as the co-catalyst. Steady evolution of hydrogen and oxygen is performed under both visible light and simulated sunlight irradiation. The solar-to-hydrogen efficiency of double-shelled STO:La/Rh HoMS-BVO photocatalysts reaches 0.08%, which is twofold higher than STO:La/Rh NP-BVO photocatalysts.

Sequential cocatalyst decoration on BaTaO2N towards highly-active Z-scheme water splitting

Oxynitride photocatalysts hold promise for renewable solar hydrogen production via water splitting owing to their intense visible light absorption. Cocatalyst loading is essential for activation of such oxynitride photocatalysts. However, cocatalyst nanoparticles form aggregates and exhibit weak interaction with photocatalysts, which prevents eliciting their intrinsic photocatalytic performance. Here, we demonstrate efficient utilization of photoexcited electrons in a single-crystalline particulate BaTaO₂N photocatalyst prepared with the assistance of RbCl flux for H₂ evolution reactions via sequential decoration of Pt cocatalyst by impregnation-reduction followed by site-selective photodeposition. The Pt-loaded BaTaO₂N photocatalyst evolves H₂ over 100 times more efficiently than before, with an apparent quantum yield of 6.8% at the wavelength of 420 nm, from a methanol aqueous solution, and a solar-to-hydrogen energy conversion efficiency of 0.24% in Z-scheme water splitting. Enabling uniform dispersion and intimate contact of cocatalyst nanoparticles on single-crystalline narrow-bandgap particulate photocatalysts is a key to efficient solar-to-chemical energy conversion.

d10 or d0? Theoretical and experimental comparison between rutile GeO2 and TiO2 for photocatalytic water splitting

Rutile GeO₂ with d¹⁰ metal in octahedral coordination possesses both a high charge separation rate and carrier mobility because the partial charge density is dominated by Ge-O anti-bonding for CBM. GeO₂ is capable of photocatalytic water splitting, even visible light water splitting through combination with the sensitizer melon.

An Overview of the Photocatalytic Water Splitting over Suspended Particles

The conversion of solar to chemical energy is one of the central processes considered in the emerging renewable energy economy. Hydrogen production from water splitting over particulate semiconductor catalysts has often been proposed as a simple and a cost-effective method for large-scale production. In this review, we summarize the basic concepts of the overall water splitting (in the absence of sacrificial agents) using particulate photocatalysts, with a focus on their synthetic methods and the role of the so-called “co-catalysts”. Then, a focus is then given on improving light absorption in which the Z-scheme concept and the overall system efficiency are discussed. A section on reactor design and cost of the overall technology is given, where the possibility of the different technologies to be deployed at a commercial scale and the considerable challenges ahead are discussed. To date, the highest reported efficiency of any of these systems is at least one order of magnitude lower than that deserving consideration for practical applications.

Light-controlled cooperative catalysis of asymmetric sulfoxidation based on azobenzene-bridged chiral salen TiIV catalysts

Incorporation of azobenzene into the linker of bimetallic chiral salen Ti^IV catalysts allowed the photoswitchable arrangement of the two Ti(salen) units through cis/trans photoisomerization of azobenzene. The differently arranged Ti(salen) units changed their cooperative function to reflect the positional relationships, as a result, their efficiency as cooperative catalysts in asymmetric sulfoxidation could be readily controlled by light stimuli.

Ta3N5 nanorods encapsulated into 3D hydrangea-like MoS2 for enhanced photocatalytic hydrogen evolution under visible light irradiation

Tantalum nitride (Ta₃N₅) with an appealing band gap (∼2.1 eV) has emerged as a promising catalyst in the photocatalysis field. However, Ta₃N₅ application in the photocatalytic hydrogen evolution reaction (HER) is limited due to disadvantages such as unsatisfactory separation and transfer of photogenerated carriers. Here we utilize MoS₂ as co-catalysts to promote the kinetics of photocatalytic H₂ evolution over Ta₃N₅. The Ta₃N₅ nanorods were encapsulated into 3D hydrangea-like MoS₂ for maximizing the contact areas between Ta₃N₅ and MoS₂ and offering rich active sites. More importantly, spectroscopic analysis and theoretical calculations consistently reveal that the unique interfacial interaction, as well as the matching band alignment between Ta₃N₅ and MoS₂, accelerates the photogenerated charge extraction from Ta₃N₅ to MoS₂, reducing charge recombination losses in Ta₃N₅. Thus, the optimized Ta₃N₅/MoS₂ hybrid exhibits a substantially enhanced hydrogen evolution rate (56.5 μmol h^-1), over 22 times higher than that of pristine Ta₃N₅. This work may provide a general strategy to overcome the low photocatalytic activity of nitrides for hydrogen evolution.

Bismuth-Based Photocatalysts for Solar Photocatalytic Carbon Dioxide Conversion

Photocatalytic CO₂ conversion into solar fuels is an effective means for simultaneously solving both the greenhouse effect and energy crisis. In the past ten years, bismuth-based photocatalysts for environmental remediation have experienced a golden period of development. However, solar photocatalytic CO₂ conversion has only been developed over the past five years and, until now, no reviews have been published on bismuth-based photocatalysts for the photocatalytic conversion of CO₂ . For the first time, solar photocatalytic CO₂ conversion systems are reviewed herein. Synthetic methods and photocatalytic CO₂ performances of bismuth-based photocatalysts, including Sillén-structured BiOX (X=Cl, Br, I); Aurivillius-structured Bi₂ MO₆ (M=Mo, W); and Scheelite-structured BiVO₄ , Bi₂ S₃ , BiYO₃ , and BiOIO₃ , are summarized. In addition, activity-enhancing strategies for this photocatalyst family, including oxygen vacancies, bismuth-rich strategy, facet control, conventional type II heterojunction, Z-scheme heterojunction, and cocatalyst deposition, are reviewed. Finally, the main mechanistic research methods, such as in situ FTIR spectroscopy and theoretical calculations, are presented. Challenges and research trends reported in studies of bismuth-based photocatalysts for photocatalytic CO₂ conversion are discussed and summarized.

Development of Mixed-Anion Photocatalysts with Wide Visible-Light Absorption Bands for Solar Water Splitting

Rapid fossil-fuel consumption, severe environmental concerns, and growing energy demands call for the exploitation of environmentally friendly, recyclable, new energy sources. Fuel-producing artificial systems that directly convert solar energy into fuels by mimicking natural photosynthesis are expected to achieve this goal. Among them, the conversion of solar energy into hydrogen energy through the photocatalytic water-splitting process over a particulate semiconductor is one of the most promising routes due to advantages such as simplicity, cheapness, and ease of large-scale production. Abundant metal oxide photocatalysts have been developed in the last century, but most are only active under UV-light irradiation. To harvest a much wider range of the solar spectrum, the development of photocatalysts with wide visible-light absorption bands has become increasingly popular this century. Herein, a brief overview of materials developed for promising solar water splitting, with an emphasis on a mixed-anion structure and wide visible-light absorption bands, is presented, with some basic information on the principles, approaches, and research progress on the photocatalytic water-splitting reaction with particulate semiconductors. Typical progress on research into one- and two-step (Z-scheme) overall water-splitting systems by utilizing mixed-anion photocatalysts is highlighted, together with research strategies and modification methods.

Heterostructure of 1D Ta3 N5 Nanorod/BaTaO2 N Nanoparticle Fabricated by a One-Step Ammonia Thermal Route for Remarkably Promoted Solar Hydrogen Production

Heterostructures are widely fabricated for promotion of photogenerated charge separation and solar cell/fuel production. (Oxy)nitrides are extremely promising for solar energy conversion, but the fabrication of heterostructures based on nitrogen-containing semiconductors is still challenging. Here, a simple ammonia thermal synthesis of a heterostructure (denoted as Ta₃ N₅ /BTON) composed of 1D Ta₃ N₅ nanorods and BaTaO₂ N (BTON) nanoparticles (0D), which is demonstrated to result in a remarkable increase in photogenerated charge separation and solar hydrogen production from water, is introduced. As analyzed and discussed, the Ta₃ N₅ /BTON heterostructure is type II and tends to create intimate interfaces between the 1D nanorods and 0D nanoparticles. The 1D Ta₃ N₅ nanorods are demonstrated to transfer electrons along the rod orientation direction. Furthermore, the intimate interfaces of the heterostructure are believed to originate from the similar Ta-based octahedron units of Ta₃ N₅ and BTON. All of the above features are expected to integrally endow increased photoinduced charge separation and one order of magnitude higher solar overall water splitting activity with respect to counterpart systems. These results may open a new avenue to fabricate heterostructures on the basis of nitrogen-containing semiconductors that is extremely promising for solar energy conversion.

Recent developments in heterogeneous photocatalysts for solar-driven overall water splitting

Overall water splitting based on particulate photocatalysts is an easily constructed and cost-effective technology for the conversion of abundant solar energy into clean and renewable hydrogen energy on a large scale.

Integration of FexS electrocatalysts and simultaneously generated interfacial oxygen vacancies to synergistically boost photoelectrochemical water splitting of Fe2O3 photoanodes

Integration of FexS electrocatalysts and simultaneously generated interfacial oxygen vacancies (VO) was designed to promote the water splitting performance of Fe2O3 photoanodes, in which a synergistic effect remarkably reduces the carrier recombination, increases the number of active sites, and facilitates the photogenerated holes to participate in water oxidation.

Phase Transformation Synthesis of Strontium Tantalum Oxynitride-Based Heterojunction for Improved Visible Light-Driven Hydrogen Evolution

Tantalum oxynitride-based materials, which possess narrow band gaps and sufficient band energy potentials, have been of immense interest for water splitting. However, the efficiency of photocatalytic reactions is still low because of the fast electron-hole recombination. Here, a Sr₂Ta₂O_{7- x}N _x/SrTaO₂N heterostructured photocatalyst with a well-matched band structure was in situ constructed by the nitridation of hydrothermal-prepared Sr₂Ta₂O₇ nanosheets. Compared to Sr₂Ta₂O_{7- x}N _x and pure SrTaO₂N, the Sr₂Ta₂O_{7- x}N _x/SrTaO₂N heterostructured photocatalyst exhibited the highest rate of hydrogen evolution, which is ca. 2.0 and 76.4 times of Sr₂Ta₂O_{7- x}N _x and pure SrTaO₂N, respectively, under the similar reaction condition. The enhanced performance arises from the formation of suitable band-matched heterojunction-accelerated charge separation. This work provides a promising strategy for the construction of tantalum oxynitride-based heterojunction photocatalysts.

Mediator- and co-catalyst-free direct Z-scheme composites of Bi2WO6-Cu3P for solar-water splitting

Exploring new single, active photocatalysts for solar-water splitting is highly desirable to expedite current research on solar-chemical energy conversion. In particular, Z-scheme-based composites (ZBCs) have attracted extensive attention due to their unique charge transfer pathway, broader redox range, and stronger redox power compared to conventional heterostructures. In the present report, we have for the first time explored Cu₃P, a new, single photocatalyst for solar-water splitting applications. Moreover, a novel ZBC system composed of Bi₂WO₆-Cu₃P was designed employing a simple method of ball-milling complexation. The synthesized materials were examined and further investigated through various microscopic, spectroscopic, and surface area characterization methods, which have confirmed the successful hybridization between Bi₂WO₆ and Cu₃P and the formation of a ZBC system that shows the ideal position of energy levels for solar-water splitting. Notably, the ZBC composed of Bi₂WO₆-Cu₃P is a mediator- and co-catalyst-free photocatalyst system. The improved photocatalytic efficiency obtained with this system compared to other ZBC systems assisted by mediators and co-catalysts establishes the critical importance of interfacial solid-solid contact and the well-balanced position of energy levels for solar-water splitting. The promising solar-water splitting under optimum composition conditions highlighted the relationship between effective charge separation and composition.

The role of electronegativity on the extent of nitridation of group 5 metals as revealed by reactions of tantalum cluster cations with ammonia molecules

The electronegativity of the metal (V > Ta) plays a key role in determining the composition of the metal nitrides.

Nanostructured TaON/Ta3N5 as a highly efficient type-II heterojunction photoanode for photoelectrochemical water splitting

A heterostructured TaON/Ta₃N₅ photoanode exhibits a 350 mV negative shift of photocurrent onset potential to 0.65 V versus the reversible hydrogen electrode.

Stability and Performance of Sulfide-, Nitride-, and Phosphide-Based Electrodes for Photocatalytic Solar Water Splitting

With the past decade of worldwide sustained efforts on artificial photosynthesis for photocatalytic solar water splitting and clean hydrogen generation by dedicated researchers and engineers from different disciplines, substantial progress has been achieved in raising its overall efficiency along with finding new photocatalysts. Various materials, systems, devices, and better fundamental understandings of the interplay between interfacial chemistry, electronic structure, and photogenerated charge dynamics involved have been developed. Nevertheless, the overall photocatalytic performance is yet to achieve its maximum theoretical limit. Moreover, the stability of well-known semiconductors (as well as novel ones) remains the biggest challenge that scientists are facing to develop durable industrial-scale devices for large-scale water oxidation and overall solar water splitting. In this Perspective, we summarize the major achievements and the different approaches carried out to improve the stability and performance of photoelectrodes based on sulfide, nitride, and phosphide semiconductors.

Liberation of three dihydrogens from two ethene molecules as mediated by the tantalum nitride anion cluster Ta3N2− at room temperature

The full dehydrogenation of C₂H₄ by gas-phase anions Ta₃N₂⁻ as well as the structure and reactivity of the M–N–C cluster is reported for the first time.

Elucidating the impact of A-site cation change on photocatalytic H2 and O2 evolution activities of perovskite-type LnTaON2 (Ln = La and Pr)

Impact of A-site cation change on photocatalytic H₂ and O₂ evolution of LnTaON₂ (Ln = La and Pr) was studied.