1
|
Barbosa JL, de Melo MIA, da Silva Cunha P, de Miranda MC, Barrioni BR, Moreira CDF, da Fonseca Ferreira A, Arantes RME, de Sá MA, de Magalhães Pereira M, Rodrigues MA, Novikoff S, Gomes DA, de Goes AM. Development of a membrane and a bilayer of chitosan, gelatin, and polyhydroxybutyrate to be used as wound dressing for the regeneration of rat excisional wounds. J Biomed Mater Res A 2024; 112:82-98. [PMID: 37795871 DOI: 10.1002/jbm.a.37616] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2023] [Revised: 08/09/2023] [Accepted: 09/07/2023] [Indexed: 10/06/2023]
Abstract
The skin is the largest organ in the human body that acts as a protective barrier from the outside environment. Certain dermatological pathologies or significant skin lesions can result in serious complications. Several studies have focused on the development of tissue-engineered skin substitutes. In this study, a new bilayer scaffold composed of a chitosan-gelatin membrane and a chitosan-polyhydroxybutyrate (PHB) porous matrix was synthesized and populated with human adipose-derived mesenchymal stem cells (hASCs) to be potentially used for wound dressing applications. By combining this membrane and porous matrix with the stem cells, we aimed to provide immunomodulation and differentiation capabilities for the wound environment, as well as mechanical strength and biocompatibility for the underlying tissue. The membrane was prepared from the mixture of chitosan and gelatin in a 2:1 ratio and the porous matrix was prepared from the mixture of chitosan and PHB, in equal proportions to form a final solution at 2.5% (m/v). Fourier transform infrared spectroscopy analysis showed the formation of blends, and micro-computed tomography, scanning electron microscopy and atomic force microscopy images demonstrated membrane roughness and matrix porosity. The MTT assay showed that the scaffolds were biocompatible with hASC. The membrane and the bilayer were used as dressing and support for cell migration in the dorsal excisional wound model in Wistar rats. Histological and gene transcriptional analyses showed that the animals that received the scaffolds regenerated the hair follicles in the deep dermis in the central region of the wound. Our results demonstrate the potential of these new biomaterials as dressings in wound healing studies, favoring tissue regeneration.
Collapse
Affiliation(s)
- Joana Lobato Barbosa
- Departamento de Bioquímica e Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
| | - Mariane Izabella Abreu de Melo
- Departamento de Bioquímica e Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
- Serviço de Radiofármacos, Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, Brazil
| | - Pricila da Silva Cunha
- Departamento de Bioquímica e Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
- Instituto Federal de Educação, Ciência e Tecnologia do Sudeste de Minas Gerais, Muriaé, Brazil
| | - Marcelo Coutinho de Miranda
- Departamento de Bioquímica e Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
| | | | | | | | - Rosa Maria Esteves Arantes
- Departamento de Patologia Geral, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
| | - Marcos Augusto de Sá
- Departamento de Morfologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
| | | | - Michele Angela Rodrigues
- Departamento de Bioquímica e Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
- Serviço de Radiofármacos, Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, Brazil
| | - Silviene Novikoff
- Transplants Immunobiology Laboratory, Department of Immunology, University of São Paulo, São Paulo, Brazil
| | - Dawidson Assis Gomes
- Departamento de Bioquímica e Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
| | - Alfredo Miranda de Goes
- Departamento de Bioquímica e Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
- Departamento de Patologia Geral, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
| |
Collapse
|
2
|
Jaffur BN, Kumar G, Jeetah P, Ramakrishna S, Bhatia SK. Current advances and emerging trends in sustainable polyhydroxyalkanoate modification from organic waste streams for material applications. Int J Biol Macromol 2023; 253:126781. [PMID: 37696371 DOI: 10.1016/j.ijbiomac.2023.126781] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2023] [Revised: 08/29/2023] [Accepted: 09/05/2023] [Indexed: 09/13/2023]
Abstract
The current processes for producing polyhydroxyalkanoates (PHAs) are costly, owing to the high cost of cultivation feedstocks, and the need to sterilise the growth medium, which is energy-intensive. PHA has been identified as a promising biomaterial with a wide range of potential applications and its functionalization from waste streams has made significant advances recently, which can help foster the growth of a circular economy and waste reduction. Recent developments and novel approaches in the functionalization of PHAs derived from various waste streams offer opportunities for addressing these issues. This study focuses on the development of sustainable, efficient, and cutting-edge methods, such as advanced bioprocess engineering, novel catalysts, and advances in materials science. Chemical techniques, such as epoxidation, oxidation, and esterification, have been employed for PHA functionalization, while enzymatic and microbial methods have indicated promise. PHB/polylactic acid blends with cellulose fibers showed improved tensile strength by 24.45-32.08 % and decreased water vapor and oxygen transmission rates while PHB/Polycaprolactone blends with a 1:1 ratio demonstrated an elongation at break four to six times higher than pure PHB, without altering tensile strength or elastic modulus. Moreover, PHB films blended with both polyethylene glycol and esterified sodium alginate showed improvements in crystallinity and decreased hydrophobicity.
Collapse
Affiliation(s)
- Bibi Nausheen Jaffur
- Department of Chemical and Environmental Engineering, Faculty of Engineering, University of Mauritius, Réduit 80837, Mauritius.
| | - Gopalakrishnan Kumar
- Institute of Chemistry, Bioscience and Environmental, Engineering, Faculty of Science and Technology, University of Stavanger, Stavanger, Norway; School of Civil and Environmental Engineering, Yonsei University, Seoul 03722, South Korea
| | - Pratima Jeetah
- Department of Chemical and Environmental Engineering, Faculty of Engineering, University of Mauritius, Réduit 80837, Mauritius
| | - Seeram Ramakrishna
- Department of Mechanical Engineering, College of Design and Engineering, National University of Singapore, 9 Engineering Drive 1, 117575, Singapore
| | - Shashi Kant Bhatia
- Department of Biological Engineering, Konkuk University, Seoul 05029, South Korea
| |
Collapse
|
3
|
Lezcano MF, Martínez-Rodríguez P, Godoy K, Hermosilla J, Acevedo F, Gareis IE, Dias FJ. Exploring Schwann Cell Behavior on Electrospun Polyhydroxybutyrate Scaffolds with Varied Pore Sizes and Fiber Thicknesses: Implications for Neural Tissue Engineering. Polymers (Basel) 2023; 15:4625. [PMID: 38139877 PMCID: PMC10748293 DOI: 10.3390/polym15244625] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/18/2023] [Revised: 11/20/2023] [Accepted: 11/26/2023] [Indexed: 12/24/2023] Open
Abstract
The placement of a polymeric electrospun scaffold is among the most promising strategies to improve nerve regeneration after critical neurotmesis. It is of great interest to investigate the effect of these structures on Schwann cells (SCs), as these cells lead nerve regeneration and functional recovery. The aim of this study was to assess SC viability and morphology when cultured on polyhydroxybutyrate (PHB) electrospun scaffolds with varied microfiber thicknesses and pore sizes. Six electrospun scaffolds were obtained using different PHB solutions and electrospinning parameters. All the scaffolds were morphologically characterized in terms of fiber thickness, pore size, and overall appearance by analyzing their SEM images. SCs seeded onto the scaffolds were analyzed in terms of viability and morphology throughout the culture period through MTT assay and SEM imaging. The SCs were cultured on three scaffolds with homogeneous smooth fibers (fiber thicknesses: 2.4 μm, 3.1 μm, and 4.3 μm; pore sizes: 16.7 μm, 22.4 μm, and 27.8 μm). SC infiltration and adhesion resulted in the formation of a three-dimensional network composed of intertwined fibers and cells. The SCs attached to the scaffolds maintained their characteristic shape and size throughout the culture period. Bigger pores and thicker fibers resulted in higher SC viability.
Collapse
Affiliation(s)
- María Florencia Lezcano
- Departamento de Bioingeniería, Facultad de Ingeniería, Universidad Nacional de Entre Ríos, Oro Verde 3100, Argentina (I.E.G.)
| | - Paulina Martínez-Rodríguez
- Oral Biology Research Centre (CIBO-UFRO), Department of Integral Adults Dentistry, Dental School, Universidad de La Frontera, Temuco 4780000, Chile
| | - Karina Godoy
- Scientific and Technological Bioresource Nucleus (BIOREN-UFRO), Universidad de La Frontera, Temuco 4780000, Chile
| | - Jeyson Hermosilla
- Programa de doctorado en Ciencias de Recursos Naturales, Universidad de La Frontera, Temuco 4780000, Chile
- Center of Excellence in Translational Medicine (CEMT), Faculty of Medicine, Scientific and Technological Bioresource Nucleus (BIOREN), Universidad de La Frontera, Temuco 4780000, Chile;
| | - Francisca Acevedo
- Center of Excellence in Translational Medicine (CEMT), Faculty of Medicine, Scientific and Technological Bioresource Nucleus (BIOREN), Universidad de La Frontera, Temuco 4780000, Chile;
- Department of Basic Sciences, Faculty of Medicine, Universidad de La Frontera, Temuco 4780000, Chile
| | - Iván Emilio Gareis
- Departamento de Bioingeniería, Facultad de Ingeniería, Universidad Nacional de Entre Ríos, Oro Verde 3100, Argentina (I.E.G.)
| | - Fernando José Dias
- Oral Biology Research Centre (CIBO-UFRO), Department of Integral Adults Dentistry, Dental School, Universidad de La Frontera, Temuco 4780000, Chile
| |
Collapse
|
4
|
Inchingolo AM, Malcangi G, Ferrante L, Del Vecchio G, Viapiano F, Inchingolo AD, Mancini A, Annicchiarico C, Inchingolo F, Dipalma G, Minetti E, Palermo A, Patano A. Surface Coatings of Dental Implants: A Review. J Funct Biomater 2023; 14:jfb14050287. [PMID: 37233397 DOI: 10.3390/jfb14050287] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2023] [Revised: 05/17/2023] [Accepted: 05/19/2023] [Indexed: 05/27/2023] Open
Abstract
Replacement of missing teeth is possible using biocompatible devices such as endosseous implants. This study aims to analyze and recognize the best characteristics of different implant surfaces that ensure good peri-implant tissue healing and thus clinical success over time. The present review was performed on the recent literature concerning endosseous implants made of titanium, a material most frequently used because of its mechanical, physical, and chemical characteristics. Thanks to its low bioactivity, titanium exhibits slow osseointegration. Implant surfaces are treated so that cells do not reject the surface as a foreign material and accept it as fully biocompatible. Analysis of different types of implant surface coatings was performed in order to identify ideal surfaces that improve osseointegration, epithelial attachment to the implant site, and overall peri-implant health. This study shows that the implant surface, with different adhesion, proliferation, and spreading capabilities of osteoblastic and epithelial cells, influences the cells involved in anchorage. Implant surfaces must have antibacterial capabilities to prevent peri-implant disease. Research still needs to improve implant material to minimize clinical failure.
Collapse
Affiliation(s)
| | - Giuseppina Malcangi
- Department of Interdisciplinary Medicine, University of Bari "Aldo Moro", 70124 Bari, Italy
| | - Laura Ferrante
- Department of Interdisciplinary Medicine, University of Bari "Aldo Moro", 70124 Bari, Italy
| | - Gaetano Del Vecchio
- Department of Interdisciplinary Medicine, University of Bari "Aldo Moro", 70124 Bari, Italy
| | - Fabio Viapiano
- Department of Interdisciplinary Medicine, University of Bari "Aldo Moro", 70124 Bari, Italy
| | | | - Antonio Mancini
- Department of Interdisciplinary Medicine, University of Bari "Aldo Moro", 70124 Bari, Italy
| | - Ciro Annicchiarico
- Department of Interdisciplinary Medicine, University of Bari "Aldo Moro", 70124 Bari, Italy
| | - Francesco Inchingolo
- Department of Interdisciplinary Medicine, University of Bari "Aldo Moro", 70124 Bari, Italy
| | - Gianna Dipalma
- Department of Interdisciplinary Medicine, University of Bari "Aldo Moro", 70124 Bari, Italy
| | - Elio Minetti
- Department of Biomedical, Surgical, and Dental Science, University of Milan, 20122 Milan, Italy
| | - Andrea Palermo
- College of Medicine and Dentistry Birmingham, University of Birmingham, Birmingham B4 6BN, UK
| | - Assunta Patano
- Department of Interdisciplinary Medicine, University of Bari "Aldo Moro", 70124 Bari, Italy
| |
Collapse
|
5
|
Huang F, Liu W, Lai J, Wu J, Huang A, Geng L, Peng X. Enhanced heat resistance and expansion ratio of biodegradable poly (lactic acid)/poly (butylene adipate-co-terephthalate) composite foams via synergistic effect of nucleating agent and chain extension. JOURNAL OF POLYMER ENGINEERING 2023. [DOI: 10.1515/polyeng-2022-0284] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/15/2023]
Abstract
Abstract
Environmentally friendly foams have been studied extensively to handle the plastic pollution caused by disposable tableware. Herein, biodegradable poly (lactic acid) (PLA) – poly (butylene adipate-co-terephthalate) (PBAT) composites were first fabricated by melt blending, in which a reactive chain extender (ADR) was incorporated to enhance the interfacial compatibility and melt strength, a nucleating agent (TMC) was applied to improve the crystallinity. Subsequently, the foaming behavior of the composites was investigated via supercritical CO2 foaming. Specifically, a spherulite and shish-kebab-like nanoporous structure was observed from PLA and PLA/TMC foams, respectively, when the soaking temperature was far below melting temperature. With an increase of foaming temperature, the unmelted completely crystals served as physical cross-linking points, also contributing to a high melt strength. Combined with chain extension reaction of ADR, the PLA–PBAT/ADR/TMC foams showed the largest cell diameter and expansion ratio, which were 19 μm and 8.9, respectively. Furthermore, the heat resistance of PLA–PBAT/ADR/TMC foams was also significantly improved, owing to the high crystallinity induced by TMC. Consequently, the composite foams with superior heat resistance and toughness were obtained to broaden its application as biodegradable disposable tableware for hot food.
Collapse
Affiliation(s)
- Feng Huang
- Key Laboratory of Polymer Materials and Products of Universities in Fujian, Department of Materials Science and Engineering , Fujian University of Technology , Fuzhou , Fujian 350118 , China
| | - Wei Liu
- Key Laboratory of Polymer Materials and Products of Universities in Fujian, Department of Materials Science and Engineering , Fujian University of Technology , Fuzhou , Fujian 350118 , China
| | - Jun Lai
- Key Laboratory of Polymer Materials and Products of Universities in Fujian, Department of Materials Science and Engineering , Fujian University of Technology , Fuzhou , Fujian 350118 , China
| | - Jianming Wu
- Key Laboratory of Polymer Materials and Products of Universities in Fujian, Department of Materials Science and Engineering , Fujian University of Technology , Fuzhou , Fujian 350118 , China
| | - An Huang
- Key Laboratory of Polymer Materials and Products of Universities in Fujian, Department of Materials Science and Engineering , Fujian University of Technology , Fuzhou , Fujian 350118 , China
| | - Lihong Geng
- Key Laboratory of Polymer Materials and Products of Universities in Fujian, Department of Materials Science and Engineering , Fujian University of Technology , Fuzhou , Fujian 350118 , China
| | - Xiangfang Peng
- Key Laboratory of Polymer Materials and Products of Universities in Fujian, Department of Materials Science and Engineering , Fujian University of Technology , Fuzhou , Fujian 350118 , China
| |
Collapse
|
6
|
Máčalová D, Janalíková M, Sedlaříková J, Rektoříková I, Koutný M, Pleva P. Genotypic and Phenotypic Detection of Polyhydroxyalkanoate Production in Bacterial Isolates from Food. Int J Mol Sci 2023; 24:ijms24021250. [PMID: 36674766 PMCID: PMC9864133 DOI: 10.3390/ijms24021250] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2022] [Revised: 12/22/2022] [Accepted: 01/05/2023] [Indexed: 01/11/2023] Open
Abstract
Polyhydroxyalkanoates (PHAs) are widely used in medical and potentially in other applications due to their biocompatibility and biodegradability. Understanding PHA biosynthetic pathways may lead to the detection of appropriate conditions (substrates) for producing a particular PHA type by a specific microbial strain. The aim of this study was to establish a method enabling potentially interesting PHA bacterial producers to be found. In the study, all four classes of PHA synthases and other genes involved in PHA formation (fabG, phaA, phaB, phaG, and phaJ) were detected by PCR in 64 bacterial collection strains and food isolates. Acinetobacter, Bacillus, Cupriavidus, Escherichia, Klebsiella, Lelliottia, Lysinibacillus, Mammaliicoccus, Oceanobacillus, Pantoea, Peribacillus, Priestia, Pseudomonas, Rahnella, Staphylococcus, and Stenotrophomonas genera were found among these strains. Fructose, glucose, sunflower oil, and propionic acid were utilized as carbon sources and PHA production was detected by Sudan black staining, Nile blue staining, and FTIR methods. The class I synthase and phaA genes were the most frequently found, indicating the strains' ability to synthesize PHA from carbohydrates. Among the tested bacterial strains, the Pseudomonas genus was identified as able to utilize all tested carbon sources. The Pseudomonas extremorientalis strain was determined as a prospect for biotechnology applications.
Collapse
Affiliation(s)
- Daniela Máčalová
- Department of Environmental Protection Engineering, Faculty of Technology, Tomas Bata University in Zlin, 275 Vavreckova, 76001 Zlin, Czech Republic
| | - Magda Janalíková
- Department of Environmental Protection Engineering, Faculty of Technology, Tomas Bata University in Zlin, 275 Vavreckova, 76001 Zlin, Czech Republic
| | - Jana Sedlaříková
- Department of Fat, Surfactant and Cosmetics Technology, Faculty of Technology, Tomas Bata University in Zlin, 275 Vavreckova, 76001 Zlin, Czech Republic
| | - Iveta Rektoříková
- Department of Environmental Protection Engineering, Faculty of Technology, Tomas Bata University in Zlin, 275 Vavreckova, 76001 Zlin, Czech Republic
| | - Marek Koutný
- Department of Environmental Protection Engineering, Faculty of Technology, Tomas Bata University in Zlin, 275 Vavreckova, 76001 Zlin, Czech Republic
| | - Pavel Pleva
- Department of Environmental Protection Engineering, Faculty of Technology, Tomas Bata University in Zlin, 275 Vavreckova, 76001 Zlin, Czech Republic
- Correspondence:
| |
Collapse
|
7
|
Microplastic burden in Africa: A review of occurrence, impacts, and sustainability potential of bioplastics. CHEMICAL ENGINEERING JOURNAL ADVANCES 2022. [DOI: 10.1016/j.ceja.2022.100402] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/02/2023] Open
|
8
|
A promising antimicrobial bionanocomposite based poly(3-hydroxybutyrate-co-3-hydroxyvalerate) reinforced silver doped zinc oxide nanoparticles. Sci Rep 2022; 12:14299. [PMID: 35995923 PMCID: PMC9395520 DOI: 10.1038/s41598-022-17470-y] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/06/2022] [Accepted: 07/26/2022] [Indexed: 02/02/2023] Open
Abstract
A bionanocomposite based on biosynthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and reinforced with silver@zinc oxide (Ag-ZnO) was synthesized in variable loadings of Ag-ZnO using the in-situ casting dissolution technique. The degradable biopolymer PHBV had been biosynthesized from date waste as a renewable carbon source. The fabricated products were investigated as promising antibacterial materials. The Ag-ZnO nanoparticles were also synthesized using the green method in the presence of Gum Arabic. The Ag-ZnO nanoparticles were loaded within the PHBV biopolymer backbone at concentration of 1%, 3%, 5% and 10%, PHBV/Ag-ZnO(1,3,5,10%). The chemical structure, morphology, physical and thermal properties of the PHBV/Ag-ZnO bionanocomposites were assessed via common characterization tools of FTIR, TGA, XRD, SEM and EDX. One step of the degradation process was observed in the range of 200-220 °C for all the obtained materials. The onset degradation temperature of the bionanocomposites have been noticeably increased with increasing the nanofiller loading percentage. In addition, fabricated products were investigated for their interesting antibacterial performance. A detailed biological screening for the obtained products was confirmed against some selected Gram-positive and Gram-negative strains S. aureus and E. coli, respectively. Overall, the bionanocomposite PHBV/Ag-ZnO(10%) was the most potent against both types of the selected bacteria. The order of bacterial growth inhibition on the surface of the fabricated bionanocomposites was detected as follows: PHBV/Ag-ZnO(10%) > PHBV/Ag-ZnO(5%) > PHBV/Ag-ZnO(3%) > PHBV/Ag-ZnO(1%).
Collapse
|
9
|
Agarwal P, Soni R, Kaur P, Madan A, Mishra R, Pandey J, Singh S, Singh G. Cyanobacteria as a Promising Alternative for Sustainable Environment: Synthesis of Biofuel and Biodegradable Plastics. Front Microbiol 2022; 13:939347. [PMID: 35903468 PMCID: PMC9325326 DOI: 10.3389/fmicb.2022.939347] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/09/2022] [Accepted: 06/09/2022] [Indexed: 11/13/2022] Open
Abstract
With the aim to alleviate the increasing plastic burden and carbon footprint on Earth, the role of certain microbes that are capable of capturing and sequestering excess carbon dioxide (CO2) generated by various anthropogenic means was studied. Cyanobacteria, which are photosynthetic prokaryotes, are promising alternative for carbon sequestration as well as biofuel and bioplastic production because of their minimal growth requirements, higher efficiency of photosynthesis and growth rates, presence of considerable amounts of lipids in thylakoid membranes, and cosmopolitan nature. These microbes could prove beneficial to future generations in achieving sustainable environmental goals. Their role in the production of polyhydroxyalkanoates (PHAs) as a source of intracellular energy and carbon sink is being utilized for bioplastic production. PHAs have emerged as well-suited alternatives for conventional plastics and are a parallel competitor to petrochemical-based plastics. Although a lot of studies have been conducted where plants and crops are used as sources of energy and bioplastics, cyanobacteria have been reported to have a more efficient photosynthetic process strongly responsible for increased production with limited land input along with an acceptable cost. The biodiesel production from cyanobacteria is an unconventional choice for a sustainable future as it curtails toxic sulfur release and checks the addition of aromatic hydrocarbons having efficient oxygen content, with promising combustion potential, thus making them a better choice. Here, we aim at reporting the application of cyanobacteria for biofuel production and their competent biotechnological potential, along with achievements and constraints in its pathway toward commercial benefits. This review article also highlights the role of various cyanobacterial species that are a source of green and clean energy along with their high potential in the production of biodegradable plastics.
Collapse
|
10
|
Bejagam KK, Gupta NS, Lee KS, Iverson CN, Marrone BL, Pilania G. Predicting the Mechanical Response of Polyhydroxyalkanoate Biopolymers Using Molecular Dynamics Simulations. Polymers (Basel) 2022; 14:polym14020345. [PMID: 35054751 PMCID: PMC8778129 DOI: 10.3390/polym14020345] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/11/2021] [Revised: 12/30/2021] [Accepted: 01/07/2022] [Indexed: 02/04/2023] Open
Abstract
Polyhydroxyalkanoates (PHAs) have emerged as a promising class of biosynthesizable, biocompatible, and biodegradable polymers to replace petroleum-based plastics for addressing the global plastic pollution problem. Although PHAs offer a wide range of chemical diversity, the structure-property relationships in this class of polymers remain poorly established. In particular, the available experimental data on the mechanical properties is scarce. In this contribution, we have used molecular dynamics simulations employing a recently developed forcefield to predict chemical trends in mechanical properties of PHAs. Specifically, we make predictions for Young's modulus, and yield stress for a wide range of PHAs that exhibit varying lengths of backbone and side chains as well as different side chain functional groups. Deformation simulations were performed at six different strain rates and six different temperatures to elucidate their influence on the mechanical properties. Our results indicate that Young's modulus and yield stress decrease systematically with increase in the number of carbon atoms in the side chain as well as in the polymer backbone. In addition, we find that the mechanical properties were strongly correlated with the chemical nature of the functional group. The functional groups that enhance the interchain interactions lead to an enhancement in both the Young's modulus and yield stress. Finally, we applied the developed methodology to study composition-dependence of the mechanical properties for a selected set of binary and ternary copolymers. Overall, our work not only provides insights into rational design rules for tailoring mechanical properties in PHAs, but also opens up avenues for future high throughput atomistic simulation studies geared towards identifying functional PHA polymer candidates for targeted applications.
Collapse
Affiliation(s)
- Karteek K. Bejagam
- Los Alamos National Laboratory, Materials Science and Technology Division, Los Alamos, NM 87545, USA;
| | - Nevin S. Gupta
- Los Alamos National Laboratory, Chemistry Division, Los Alamos, NM 87545, USA; (N.S.G.); (K.-S.L.); (C.N.I.)
| | - Kwan-Soo Lee
- Los Alamos National Laboratory, Chemistry Division, Los Alamos, NM 87545, USA; (N.S.G.); (K.-S.L.); (C.N.I.)
| | - Carl N. Iverson
- Los Alamos National Laboratory, Chemistry Division, Los Alamos, NM 87545, USA; (N.S.G.); (K.-S.L.); (C.N.I.)
| | - Babetta L. Marrone
- Los Alamos National Laboratory, Bioscience Division, Los Alamos, NM 87545, USA;
| | - Ghanshyam Pilania
- Los Alamos National Laboratory, Materials Science and Technology Division, Los Alamos, NM 87545, USA;
- Correspondence:
| |
Collapse
|
11
|
Insuasti‐Cruz E, Suárez‐Jaramillo V, Mena Urresta KA, Pila‐Varela KO, Fiallos‐Ayala X, Dahoumane SA, Alexis F. Natural Biomaterials from Biodiversity for Healthcare Applications. Adv Healthc Mater 2022; 11:e2101389. [PMID: 34643331 DOI: 10.1002/adhm.202101389] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/11/2021] [Revised: 09/20/2021] [Indexed: 12/22/2022]
Abstract
Natural biomaterials originating during the growth cycles of all living organisms have been used for many applications. They span from bioinert to bioactive materials including bioinspired ones. As they exhibit an increasing degree of sophistication, natural biomaterials have proven suitable to address the needs of the healthcare sector. Here the different natural healthcare biomaterials, their biodiversity sources, properties, and promising healthcare applications are reviewed. The variability of their properties as a result of considered species and their habitat is also discussed. Finally, some limitations of natural biomaterials are discussed and possible future developments are provided as more natural biomaterials are yet to be discovered and studied.
Collapse
Affiliation(s)
- Erick Insuasti‐Cruz
- School of Biological Sciences & Engineering Yachay Tech University Urcuquí 100119 Ecuador
| | | | | | - Kevin O. Pila‐Varela
- School of Biological Sciences & Engineering Yachay Tech University Urcuquí 100119 Ecuador
| | - Xiomira Fiallos‐Ayala
- School of Biological Sciences & Engineering Yachay Tech University Urcuquí 100119 Ecuador
| | - Si Amar Dahoumane
- Department of Chemical Engineering Polytech Montreal Montreal Quebec H3C 3A7 Canada
- Center for Advances in Water and Air Quality (CAWAQ) Lamar University Beaumont TX 77710 USA
| | - Frank Alexis
- School of Biological Sciences & Engineering Yachay Tech University Urcuquí 100119 Ecuador
| |
Collapse
|
12
|
Yu Y, Kim M, Lee GS, Lee HW, Kim JG, Kim BS. Organocatalyzed Synthesis and Degradation of Functionalized Poly(4-allyloxymethyl-β-propiolactone)s. Macromolecules 2021. [DOI: 10.1021/acs.macromol.1c01879] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Yeji Yu
- Department of Chemistry, Yonsei University, Seoul 03722, Republic of Korea
| | - Minseong Kim
- Department of Chemistry, Yonsei University, Seoul 03722, Republic of Korea
- Department of Chemistry, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
| | - Gue Seon Lee
- Department of Chemistry and Research Institute of Physics and Chemistry, Jeonbuk National University, Jeonju 54896, Republic of Korea
| | - Hyo Won Lee
- Department of Chemistry and Research Institute of Physics and Chemistry, Jeonbuk National University, Jeonju 54896, Republic of Korea
| | - Jeung Gon Kim
- Department of Chemistry and Research Institute of Physics and Chemistry, Jeonbuk National University, Jeonju 54896, Republic of Korea
| | - Byeong-Su Kim
- Department of Chemistry, Yonsei University, Seoul 03722, Republic of Korea
| |
Collapse
|
13
|
Samrot AV, Samanvitha SK, Shobana N, Renitta ER, Senthilkumar P, Kumar SS, Abirami S, Dhiva S, Bavanilatha M, Prakash P, Saigeetha S, Shree KS, Thirumurugan R. The Synthesis, Characterization and Applications of Polyhydroxyalkanoates (PHAs) and PHA-Based Nanoparticles. Polymers (Basel) 2021; 13:3302. [PMID: 34641118 PMCID: PMC8512352 DOI: 10.3390/polym13193302] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2021] [Revised: 08/31/2021] [Accepted: 08/31/2021] [Indexed: 12/22/2022] Open
Abstract
Polyhydroxyalkanoates (PHAs) are storage granules found in bacteria that are essentially hydroxy fatty acid polyesters. PHA molecules appear in variety of structures, and amongst all types of PHAs, polyhydroxybutyrate (PHB) is used in versatile fields as it is a biodegradable, biocompatible, and ecologically safe thermoplastic. The unique physicochemical characteristics of these PHAs have made them applicable in nanotechnology, tissue engineering, and other biomedical applications. In this review, the optimization, extraction, and characterization of PHAs are described. Their production and application in nanotechnology are also portrayed in this review, and the precise and various production methods of PHA-based nanoparticles, such as emulsion solvent diffusion, nanoprecipitation, and dialysis are discussed. The characterization techniques such as UV-Vis, FTIR, SEM, Zeta Potential, and XRD are also elaborated.
Collapse
Affiliation(s)
- Antony V. Samrot
- School of Bioscience, Faculty of Medicine, Bioscience and Nursing, MAHSA University, Jalan SP2, Bandar Saujana Putra, Jenjarom 42610, Selangor, Malaysia
| | - Sree K. Samanvitha
- Department of Biotechnology, Shanmugha Arts, Science, Technology & Research Academy, Thanjavur 613401, Tamil Nadu, India;
| | - N. Shobana
- Department of Biotechnology, School of Bio and Chemical Engineering, Sathyabama Institute of Science and Technology, Chennai 600119, Tamil Nadu, India; (N.S.); (M.B.); (P.P.); (S.S.); (K.S.S.)
| | - Emilin R. Renitta
- Department of Food Processing Technology, School of Agriculture and Biosciences, Karunya Institute of Science and Technology, Karunya Nagar, Coimbatore, 641114, Tamil Nadu, India;
| | - P. Senthilkumar
- Department of Chemical Engineering, School of Bio and Chemical Engineering, Sathyabama Institute of Science and Technology, Chennai 600119, Tamil Nadu, India;
| | - Suresh S. Kumar
- Centre for Materials Engineering and Regenerative Medicine, Bharath Institute of Higher Education and Research, Chennai 600126, Tamil Nadu, India
| | - S. Abirami
- Department of Microbiology, Kamaraj College, Thoothukudi 628003, Tamil Nadu, India;
| | - S. Dhiva
- Department of Microbiology, Sree Narayana College, Alathur, Palakkad 678682, Kerala, India;
| | - M. Bavanilatha
- Department of Biotechnology, School of Bio and Chemical Engineering, Sathyabama Institute of Science and Technology, Chennai 600119, Tamil Nadu, India; (N.S.); (M.B.); (P.P.); (S.S.); (K.S.S.)
| | - P. Prakash
- Department of Biotechnology, School of Bio and Chemical Engineering, Sathyabama Institute of Science and Technology, Chennai 600119, Tamil Nadu, India; (N.S.); (M.B.); (P.P.); (S.S.); (K.S.S.)
| | - S. Saigeetha
- Department of Biotechnology, School of Bio and Chemical Engineering, Sathyabama Institute of Science and Technology, Chennai 600119, Tamil Nadu, India; (N.S.); (M.B.); (P.P.); (S.S.); (K.S.S.)
| | - Krithika S. Shree
- Department of Biotechnology, School of Bio and Chemical Engineering, Sathyabama Institute of Science and Technology, Chennai 600119, Tamil Nadu, India; (N.S.); (M.B.); (P.P.); (S.S.); (K.S.S.)
| | - R. Thirumurugan
- Department of Transfusion Medicine, Jawaharlal Institute of Postgraduate Medical Education and Research, Puducherry 605006, India;
| |
Collapse
|
14
|
Dai S, Wang Z, Yang Y, Guo T, Li W. Assessment on the lung injury of mice posed by airborne PM 2.5 collected from developing area in China and associated molecular mechanisms by integrated analysis of mRNA-seq and miRNA-seq. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2021; 224:112661. [PMID: 34416640 DOI: 10.1016/j.ecoenv.2021.112661] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/15/2021] [Revised: 08/08/2021] [Accepted: 08/13/2021] [Indexed: 02/08/2023]
Abstract
Some epidemiological evidences showed exposure of airborne fine particulate matter (PM2.5) was associated with lung dysfunction. However, the adverse effects of PM2.5 from mid-scale city of China on the respiratory system were unknown. Correspondingly, the mechanisms, especially the epigenetic mechanism regulated by miRNAs, involved in PM2.5-induced lung injury has not been fully understood. In this study, male Balb/C mice were exposed to PM2.5 collected from mid-scale city (Baoji), China for 8 weeks (mean concentration 298.52 ± 25.86 μg/m3 at exposure chamber) using a whole-body exposure system. The carbon component was the main ingredient (45.80%) of PM2.5 followed by ions (43.19%). Meanwhile, the sum concentrations of polycyclic aromatic hydrocarbons (PAHs) and n-alkanes (C18-C33) were 570.48 and 2029.13 ng/m3 in the exposure chamber, respectively. Obvious lung injury including pulmonary inflammation and fibrosis (p < 0.05 compared with the control) were found from PM2.5 exposure group determined by micro-CT and histopathological assays, respectively, suggesting the health risk posed by PM2.5 from mid-scale city of China should be concerned. The integrated analysis between mRNA-seq and miRNA-seq revealed the differentially expression genes in lung tissues were enriched in immune pathways including B cell receptor signaling (p = 0.078) and cell adhesion molecules (CAMs) (p = 0.0068). The expression profiles of the genes and corresponding mRNAs involved into the immune pathways determined by RT-qPCR analysis were consistent with them conducted by transcriptome. Moreover, the expression levels of the proteins (i.e., CD19, CD81, PIK3CD, and CD22) involved into B cell receptor signaling pathway from exposure group were 1.71- to 6.948- folds compared with the control, validating the results of the genes expression profiles. Further, canonical correlation analysis (CCA) and multiple correlation analysis between the target genes and components of PM2.5 documented the organic compounds (i.e., Benzo(a)pyrene (p = 0.012) and octadecane (p = 0.05)) and inorganic elements (i.e., Cl-, Ti, Al, and Zn) was the key environmental factors. Cd19, Pik3cd, and Cd8b1 might be the key genes for lung dysfunction induced by PM2.5 illuminated using interactive analysis (p < 0.05). This work for the first time showed the adverse effects of PM2.5 in mid-scale city in China on respiratory system should be concerned, and the associated epigenetic mechanism regulated by miRNA were revealed. These results may provide new insight into the development of future assessment on the air pollution associated respiratory disease.
Collapse
Affiliation(s)
- Shuiping Dai
- National Center for Geriatrics Clinical Medicine Research, Department of Geriatrics and Gerontology, West China Hospital, Sichuan University, Chengdu 610041, China
| | - Zhenglu Wang
- College of oceanography, Hohai University, Nanjing 210098, China
| | - Ying Yang
- Center of Precision Medicine, Precision Medicine Key Laboratory of Sichuan Province, West China Hospital, Sichuan University, Chengdu 610041, China
| | - Tingting Guo
- Center of Precision Medicine, Precision Medicine Key Laboratory of Sichuan Province, West China Hospital, Sichuan University, Chengdu 610041, China
| | - Weimin Li
- Center of Precision Medicine, Precision Medicine Key Laboratory of Sichuan Province, West China Hospital, Sichuan University, Chengdu 610041, China; Department of Respiratory and Critical Care Medicine, West China Hospital, Sichuan University, Chengdu, Sichuan 610041, China.
| |
Collapse
|
15
|
Ene N, Vladu MG, Lupescu I, Ionescu AD, Vamanu E. The Production and Analysis of Biodegradable Polymers of Type of Medium-Chain-Length Polyhydroxyalkanoates (mcl-PHA) by Pseudomonas putida Strain for the Biomedical Engineering. Curr Pharm Biotechnol 2021; 23:1109-1117. [PMID: 34375190 DOI: 10.2174/1389201022666210810114117] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/14/2021] [Revised: 05/23/2021] [Accepted: 06/07/2021] [Indexed: 01/10/2023]
Abstract
BACKGROUND Polyhydroxyalkanoates (PHAs) are bacteria-synthetized biopolymers under unbalanced growth conditions. These biopolymers are considered potential biomaterials for future applications for their biocompatibility and biodegradable features and potential biomaterials for future applications for their biocompatibility and biodegradable characteristics and their ability to be quickly produced and functionalize with strong mechanical resistance. This article is intended to perform microbial fermentation using Pseudomonas putida strain to show the amount of biopolymers of the type polyhydroxyalkanoates with medium-chain-length (mcl-PHA) obtained depending on the type and quantity of added precursors (glucose and fatty acids). METHODS It is important to understand the microbial interaction and mechanism involved in PHA biosynthetis.For these, several methods were used, such as: obtaining microbial biomass by using a Pseudomonas putida strain able of PHA-producing, analysis of biopolymer production by acetone extraction following the Soxhlet method, purification of biopolymer by methanol-ethanol treatment, followed by the estimation of biomass by spectrophotometric analysis and the measurement of the dry weight of cells and the quantification of the amount of biopolymer produced following the gas chromatographic method (GC). RESULTS The highest PHA yield was obtained using octanoic (17 mL in 2000 mL medium) and hexanoic acids (14 mL in 2000 mL medium) as precursors. Consequently, octanoic acid - octanoic acid, heptanoic acid - nonanoic acid, and octanoic acid - hexanoic acid were the mix of precursors that supported the amount of PHA obtained. CONCLUSION Of the 4 types of structurally related substrate, the strain Pseudomonas putida ICCF 319 prefers the C8 sublayer for an elastomeric PHA's biosynthesis with a composition in which the C8 monomer predominates over C6 and C10.
Collapse
Affiliation(s)
- Nicoleta Ene
- Faculty of Biotechnologies, University of Agronomic Sciences and Veterinary Medicine, Mărăs,ti Blv. 59, 011464 Bucharest, Romania
| | - Mariana-Gratiela Vladu
- Faculty of Biotechnologies, University of Agronomic Sciences and Veterinary Medicine, Mărăs,ti Blv. 59, 011464 Bucharest, Romania
| | - Irina Lupescu
- National Institute for Chemical Pharmaceutical Research and Development-ICCF, Vitan Avenue 112, 031299 Bucharest, Romania
| | - Ana-Despina Ionescu
- National Institute for Chemical Pharmaceutical Research and Development-ICCF, Vitan Avenue 112, 031299 Bucharest, Romania
| | - Emanuel Vamanu
- Faculty of Biotechnologies, University of Agronomic Sciences and Veterinary Medicine, Mărăs,ti Blv. 59, 011464 Bucharest, Romania
| |
Collapse
|
16
|
Bejagam KK, Iverson CN, Marrone BL, Pilania G. Composition and Configuration Dependence of Glass-Transition Temperature in Binary Copolymers and Blends of Polyhydroxyalkanoate Biopolymers. Macromolecules 2021. [DOI: 10.1021/acs.macromol.1c00135] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/17/2023]
Affiliation(s)
- Karteek K. Bejagam
- Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, United States
| | - Carl N. Iverson
- Chemistry Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, United States
| | - Babetta L. Marrone
- Bioscience Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, United States
| | - Ghanshyam Pilania
- Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, United States
| |
Collapse
|
17
|
Polyhydroxyalkanoate Nanoparticles for Pulmonary Drug Delivery: Interaction with Lung Surfactant. NANOMATERIALS 2021; 11:nano11061482. [PMID: 34204969 PMCID: PMC8229857 DOI: 10.3390/nano11061482] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/11/2021] [Revised: 05/28/2021] [Accepted: 06/01/2021] [Indexed: 01/04/2023]
Abstract
Polyhydroxyalkanoates (PHA) are polyesters produced intracellularly by many bacterial species as energy storage materials, which are used in biomedical applications, including drug delivery systems, due to their biocompatibility and biodegradability. In this study, we evaluated the potential application of this nanomaterial as a basis of inhaled drug delivery systems. To that end, we assessed the possible interaction between PHA nanoparticles (NPs) and pulmonary surfactant using dynamic light scattering, Langmuir balances, and epifluorescence microscopy. Our results demonstrate that NPs deposited onto preformed monolayers of DPPC or DPPC/POPG bind these surfactant lipids. This interaction facilitated the translocation of the nanomaterial towards the aqueous subphase, with the subsequent loss of lipid from the interface. NPs that remained at the interface associated with liquid expanded (LE)/tilted condensed (TC) phase boundaries, decreasing the size of condensed domains and promoting the intermixing of TC and LE phases at submicroscopic scale. This provided the stability necessary for attaining high surface pressures upon compression, countering the destabilization induced by lipid loss. These effects were observed only for high NP loads, suggesting a limit for the use of these NPs in pulmonary drug delivery.
Collapse
|
18
|
Ojha N, Das N. Green Formulation of Microbial Biopolyesteric Nanocarriers Toward In Vitro Drug Delivery and Its Characterization. Curr Microbiol 2021; 78:2061-2070. [PMID: 33787978 DOI: 10.1007/s00284-021-02464-2] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/14/2020] [Accepted: 03/15/2021] [Indexed: 11/29/2022]
Abstract
In the present study, formulation and characterization of microbial biopolyesteric nanocarrier (MBPNc) was reported for in vitro controlled release of the drugs, viz., amoxicillin and levofloxacin. The synthesis of microbial biopolyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanoparticle was done by a triple emulsion method and loaded with amoxicillin and levofloxacin to improve its curative bioavailability. The synthesized MBPNc was found to be spherical in shape with a size range of 50-100 nm which was confirmed through Transmission Electron Microscopy (TEM) analysis. The surface topology and physicochemical characteristics were analyzed by Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR), and X-Ray Diffraction (XRD) spectroscopy. The cell viability % of MBPNc, amoxicillin-loaded MBPNc, and levofloxacin-loaded MBPNc on HEK293 cells at a concentration of 400 µg/ml were found to be 93.43 ± 0.66%, 92.29 ± 0.61%, and 91.53 ± 0.46%, respectively, which confirmed that MBPNc is biocompatible and can be used for biomedical applications without any cytotoxic effect. A significant decrease in the bacterial survival ratio (%) and increase in the zone of inhibition were observed on increasing the concentration of drug-loaded MBPNc against E. coli (ATCC®8739™) and S. aureus (ATCC®23,235™). The in vitro drug delivery study showed controlled release of amoxicillin (99.85 ± 0.15%) and levofloxacin (99.73 ± 0.24%) up to 22 h.
Collapse
Affiliation(s)
- Nupur Ojha
- Bioremediation Laboratory, Department of Biomedical Sciences, School of Bio Sciences and Technology, Vellore Institute of Technology, Vellore, 632014, Tamil Nadu, India
| | - Nilanjana Das
- Bioremediation Laboratory, Department of Biomedical Sciences, School of Bio Sciences and Technology, Vellore Institute of Technology, Vellore, 632014, Tamil Nadu, India.
| |
Collapse
|
19
|
Mourão MM, Xavier LP, Urbatzka R, Figueiroa LB, da Costa CEF, Dias CGBT, Schneider MPC, Vasconcelos V, Santos AV. Characterization and Biotechnological Potential of Intracellular Polyhydroxybutyrate by Stigeoclonium sp. B23 Using Cassava Peel as Carbon Source. Polymers (Basel) 2021; 13:polym13050687. [PMID: 33668862 PMCID: PMC7956423 DOI: 10.3390/polym13050687] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/06/2021] [Revised: 02/15/2021] [Accepted: 02/17/2021] [Indexed: 12/19/2022] Open
Abstract
The possibility of utilizing lignocellulosic agro-industrial waste products such as cassava peel hydrolysate (CPH) as carbon sources for polyhydroxybutyrate (PHB) biosynthesis and characterization by Amazonian microalga Stigeoclonium sp. B23. was investigated. Cassava peel was hydrolyzed to reducing sugars to obtain increased glucose content with 2.56 ± 0.07 mmol/L. Prior to obtaining PHB, Stigeoclonium sp. B23 was grown in BG-11 for characterization and Z8 media for evaluation of PHB nanoparticles' cytotoxicity in zebrafish embryos. As results, microalga produced the highest amount of dry weight of PHB with 12.16 ± 1.28 (%) in modified Z8 medium, and PHB nanoparticles exerted some toxicity on zebrafish embryos at concentrations of 6.25-100 µg/mL, increased mortality (<35%) and lethality indicators as lack of somite formation (<25%), non-detachment of tail, and lack of heartbeat (both <15%). Characterization of PHB by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimeter (DSC), and thermogravimetry (TGA) analysis revealed the polymer obtained from CPH cultivation to be morphologically, thermally, physically, and biologically acceptable and promising for its use as a biomaterial and confirmed the structure of the polymer as PHB. The findings revealed that microalgal PHB from Stigeoclonium sp. B23 was a promising and biologically feasible new option with high commercial value, potential for biomaterial applications, and also suggested the use of cassava peel as an alternative renewable resource of carbon for PHB biosynthesis and the non-use of agro-industrial waste and dumping concerns.
Collapse
Affiliation(s)
- Murilo Moraes Mourão
- Laboratory of Biotechnology of Enzymes and Biotransformations, Institute of Biological Sciences, Federal University of Pará, 66075-110 Belém, Pará, Brazil;
- Correspondence: (M.M.M.); (A.V.S.)
| | - Luciana Pereira Xavier
- Laboratory of Biotechnology of Enzymes and Biotransformations, Institute of Biological Sciences, Federal University of Pará, 66075-110 Belém, Pará, Brazil;
| | - Ralph Urbatzka
- Interdisciplinary Centre of Marine and Environmental Research—CIIMAR, University of Porto, 4450-208 Porto, Portugal; (R.U.); (V.V.)
| | - Lucas Barbosa Figueiroa
- Laboratory of Oils of the Amazon, Guamá Science and Technology Park, Federal University of Pará, 66075-750 Belém, Pará, Brazil; (L.B.F.); (C.E.F.d.C.)
| | - Carlos Emmerson Ferreira da Costa
- Laboratory of Oils of the Amazon, Guamá Science and Technology Park, Federal University of Pará, 66075-750 Belém, Pará, Brazil; (L.B.F.); (C.E.F.d.C.)
| | | | | | - Vitor Vasconcelos
- Interdisciplinary Centre of Marine and Environmental Research—CIIMAR, University of Porto, 4450-208 Porto, Portugal; (R.U.); (V.V.)
- Department of Biology, Faculty of Sciences, University of Porto, 4069-007 Porto, Portugal
| | - Agenor Valadares Santos
- Laboratory of Biotechnology of Enzymes and Biotransformations, Institute of Biological Sciences, Federal University of Pará, 66075-110 Belém, Pará, Brazil;
- Correspondence: (M.M.M.); (A.V.S.)
| |
Collapse
|
20
|
Nduko JM, Taguchi S. Microbial Production of Biodegradable Lactate-Based Polymers and Oligomeric Building Blocks From Renewable and Waste Resources. Front Bioeng Biotechnol 2021; 8:618077. [PMID: 33614605 PMCID: PMC7889595 DOI: 10.3389/fbioe.2020.618077] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/16/2020] [Accepted: 12/17/2020] [Indexed: 12/20/2022] Open
Abstract
Polyhydroxyalkanoates (PHAs) are naturally occurring biopolymers produced by microorganisms. PHAs have become attractive research biomaterials in the past few decades owing to their extensive potential industrial applications, especially as sustainable alternatives to the fossil fuel feedstock-derived products such as plastics. Among the biopolymers are the bioplastics and oligomers produced from the fermentation of renewable plant biomass. Bioplastics are intracellularly accumulated by microorganisms as carbon and energy reserves. The bioplastics, however, can also be produced through a biochemistry process that combines fermentative secretory production of monomers and/or oligomers and chemical synthesis to generate a repertoire of biopolymers. PHAs are particularly biodegradable and biocompatible, making them a part of today's commercial polymer industry. Their physicochemical properties that are similar to those of petrochemical-based plastics render them potential renewable plastic replacements. The design of efficient tractable processes using renewable biomass holds key to enhance their usage and adoption. In 2008, a lactate-polymerizing enzyme was developed to create new category of polyester, lactic acid (LA)-based polymer and related polymers. This review aims to introduce different strategies including metabolic and enzyme engineering to produce LA-based biopolymers and related oligomers that can act as precursors for catalytic synthesis of polylactic acid. As the cost of PHA production is prohibitive, the review emphasizes attempts to use the inexpensive plant biomass as substrates for LA-based polymer and oligomer production. Future prospects and challenges in LA-based polymer and oligomer production are also highlighted.
Collapse
Affiliation(s)
- John Masani Nduko
- Department of Dairy and Food Science and Technology, Faculty of Agriculture, Egerton University, Egerton, Kenya
| | - Seiichi Taguchi
- Department of Chemistry for Life Sciences and Agriculture, Faculty of Life Sciences and Agriculture, Tokyo University of Agriculture, Tokyo, Japan
| |
Collapse
|
21
|
Konchada S, Killi N, Sayyad S, Gathalkar GB, Gundloori RVN. Blends of neem oil based polyesteramide as nanofiber mats to control Culicidae. RSC Adv 2020; 10:42827-42837. [PMID: 35514911 PMCID: PMC9057958 DOI: 10.1039/d0ra08297j] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/28/2020] [Accepted: 11/16/2020] [Indexed: 12/21/2022] Open
Abstract
Mosquitoes act as vectors for several disease-causing microorganisms and pose a threat to mankind by transmitting various diseases. There are different conventional methods to repel or kill these mosquitoes for avoiding susceptibility against infections. However, to overcome the difficulties with conventional methods, new advanced materials are being studied. For the first time, we report developing a nanofiber mat with a controlled release of insecticide to repel or detain the mosquitoes. Briefly, various blend compositions were prepared by manipulating the ratio of neem oil-based polyesteramide (PEA) and polycaprolactone (PCL) immobilized with insecticide, transfluthrin (Tf). The blend solutions were electrospun to get non-woven nanofiber mats, and these nanomaterials were characterized by various spectroscopic techniques to understand their physicochemical properties. The surface morphology was analyzed using environmental scanning electron microscopy (E-SEM), and the diameter of the nanofibers was in the range of 200 to 450 nm. Further, thermal and mechanical properties were evaluated to understand the stability of nanofiber mats. In vitro drug release studies of nanofiber mat PPT-1335 showed controlled and sustained release of Tf, with ∼35% of Tf released in 24 h. However, a film of the same composition (PPT-1335) showed ∼5% of Tf release within 24 h. Moreover, in vivo bio-efficacy studies suggested the mortality of mosquitoes was about 50% with PP-133, which was further increased to 100% within 12 h in the presence of Tf (PPT-1335). However, 60% mortality of mosquitoes was observed with the film of PPT-1335. Hence, the nanofiber mat showed better efficacy against mosquitoes as compared to the film of the same composition. The degradation studies under various conditions revealed biocompatibility of the developed nanofiber mats with the ecosystem. Electrospun nanofiber mats immobilized with transfluthrin to control mosquitoes.![]()
Collapse
Affiliation(s)
- Sravanya Konchada
- Polymer Science and Engineering Division, CSIR-National Chemical Laboratory Dr. Homi Bhabha Road Pune-411008 Maharashtra India
| | - Naresh Killi
- Polymer Science and Engineering Division, CSIR-National Chemical Laboratory Dr. Homi Bhabha Road Pune-411008 Maharashtra India .,Academy of Scientific and Innovative Research (AcSIR) Ghaziabad-201002 Uttar Pradesh India
| | - Shahebaz Sayyad
- Laboratory of Entomology, Division of Organic Chemistry, CSIR-National Chemical Laboratory Dr. Homi Bhabha Road Pune-411008 Maharashtra India
| | - Ganesh B Gathalkar
- Laboratory of Entomology, Division of Organic Chemistry, CSIR-National Chemical Laboratory Dr. Homi Bhabha Road Pune-411008 Maharashtra India.,Academy of Scientific and Innovative Research (AcSIR) Ghaziabad-201002 Uttar Pradesh India
| | - Rathna V N Gundloori
- Polymer Science and Engineering Division, CSIR-National Chemical Laboratory Dr. Homi Bhabha Road Pune-411008 Maharashtra India .,Academy of Scientific and Innovative Research (AcSIR) Ghaziabad-201002 Uttar Pradesh India
| |
Collapse
|
22
|
Gopi S, Ramsay BA, Ramsay JA, Kontopoulou M. Preparation, Characterization and Processing of PCL/PHO Blends by 3D Bioplotting. INT POLYM PROC 2020. [DOI: 10.3139/217.3971] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
Affiliation(s)
- S. Gopi
- Department of Chemical Engineering, Queen's University, Kingston, ON, Canada
| | - B. A. Ramsay
- Department of Chemical Engineering, Queen's University, Kingston, ON, Canada
| | - J. A. Ramsay
- Department of Chemical Engineering, Queen's University, Kingston, ON, Canada
| | - M. Kontopoulou
- Department of Chemical Engineering, Queen's University, Kingston, ON, Canada
| |
Collapse
|
23
|
Foster LJR, Chan RTH, Russell RA, Holden PJ. Using Humidity to Control the Morphology and Properties of Electrospun BioPEGylated Polyhydroxybutyrate Scaffolds. ACS OMEGA 2020; 5:26476-26485. [PMID: 33110975 PMCID: PMC7581270 DOI: 10.1021/acsomega.0c02993] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/22/2020] [Accepted: 09/23/2020] [Indexed: 06/11/2023]
Abstract
Electrospinning produces nanofibrous scaffolds with potential for tissue engineering and wound repair. Spinning parameters control scaffold morphology and properties. BioPEGylation of polyhydroxybutyrate (PHB) introduces terminal hydrophilic groups into the hydrophobic chain, making this natural-synthetic hybrid copolymer more susceptible to humidity. Varying the humidity from 10 to 50% RH during electrospinning had a relatively little effect on polyhydroxybutyrate (PHB) average fiber and pore diameters, which remained around 3.0 and 8.7 μm, respectively. In contrast, fiber and pore diameters for electrospun bioPEGylated PHB scaffolds varied significantly with humidity, peaking at 30% RH (5.5 and 14.1 μm, respectively). While scaffolds showed little change, hydrophobicity decreased linearly with humidity during electrospinning. Compared to solvent-cast films, electrospun scaffolds showed significantly greater average cell spread. A 108% increase for olfactory ensheathing cells (OECs) cultivated on bioPEGylated PHB scaffolds was proportionally greater than their counterparts on electrospun PHB scaffolds, (70%). OECS grown on BioPEGylated PHB scaffolds were over twice the size, 260 ± 20 μm diameter, than those on PHB electrospun scaffolds, 110 ± 18 μm diameter. Electrospun scaffolds also promoted cell health compared to their solvent-cast counterparts, with increases in the mitochondrial activity of 165 ± 13 and 196 ± 13% for PHB and bioPEGylated PHB, respectively. OECS cultivated on electrospun scaffolds of bioPEGylated PHB had significantly better membrane integrities compared to their counterparts on solvent-cast films, 47 ± 5% reducing to 17 ± 6%. The combination of bioPEGylation and humidity during electrospinning permitted significant controllable changes to scaffold morphology and properties. These changes resulted in the significantly greater promotion of cell growth on electrospun bioPEGylated PHB scaffolds compared to their solvent-cast counterparts and electrospun PHB.
Collapse
Affiliation(s)
- Leslie J. R. Foster
- Bio/Polymer Research Group, Department of Chemistry, University of Alabama in Huntsville, Huntsville, Alabama 35899, United States
- Save Sight
Institute, Faculty of Health and Medicine, University of Sydney, Sydney, NSW 2141, Australia
| | - Rodman T. H. Chan
- Bio/Polymer Research Group, School of Biotechnology &
Biomolecular Science, University of New
South Wales, Sydney, NSW 2052, Australia
| | - Robert A. Russell
- Bio/Polymer Research Group, School of Biotechnology &
Biomolecular Science, University of New
South Wales, Sydney, NSW 2052, Australia
- Australian Nuclear Science & Technology Organisation, Lucas Heights, NSW 2234, Australia
| | - Peter J. Holden
- Australian Nuclear Science & Technology Organisation, Lucas Heights, NSW 2234, Australia
| |
Collapse
|
24
|
Alsafadi D, Ibrahim MI, Alamry KA, Hussein MA, Mansour A. Utilizing the crop waste of date palm fruit to biosynthesize polyhydroxyalkanoate bioplastics with favorable properties. THE SCIENCE OF THE TOTAL ENVIRONMENT 2020; 737:139716. [PMID: 32526568 DOI: 10.1016/j.scitotenv.2020.139716] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/20/2020] [Revised: 05/23/2020] [Accepted: 05/24/2020] [Indexed: 05/12/2023]
Abstract
Polyhydroxyalkanoate (PHA), a family of biodegradable and renewable biopolymers that could potentially play a significant role in bioeconomy. In this study we investigated the potential of date waste (DW) biomass as feedstock to produce PHA by the halophilic archaeon Haloferax mediterranei. The concentration of essential trace elements for H. mediterranei cells during growth and PHA biopolymer accumulation was optimized. A maximum cell dry mass of (CDM) (12.8 g L-1) and PHA concentration of (3.20 g L-1) were achieved in DW extract media that was not supplemented with trace elements, indicating that DW is a promising source for trace elements. The cultivation was scaled-up to fed-batch bioreactor fermentations under non-sterile conditions and resulted in CDM and PHA content of 18.0 g L-1 and 25%, respectively. The produced PHA was confirmed to be poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) with high 3-hydroxyvalerate (3 HV) content of 18.0 mol%. This 3 HV molar percent was achieved without the addition of expensive precursors. The PHBV is of high molecular weight (746.0 kDa) and narrow polydispersity (PDI = 1.5), and displayed reduced melting at 148.1 °C. The X-ray diffraction (XRD) analysis showed that the PHBV has amorphous nature which increases the degradation rates and workability of the biopolymer. The isotopic ratio 13C/12C (δ 13C) for PHBV was found to be - 19.1‰, which indicated that H. mediterranei prefers lighter bonds to break and uses the lighter atoms for the biosynthesis of PHBV.
Collapse
Affiliation(s)
- Diya Alsafadi
- Biocatalysis and Biosynthesis Research Unit, Foundational Science Research Division, Royal Scientific Society, Amman 11941, Jordan.
| | - Mohammad I Ibrahim
- Department of Chemistry, King Abdulaziz University, Jeddah 21589, Saudi Arabia
| | - Khalid A Alamry
- Department of Chemistry, King Abdulaziz University, Jeddah 21589, Saudi Arabia
| | - Mahmoud A Hussein
- Department of Chemistry, King Abdulaziz University, Jeddah 21589, Saudi Arabia
| | - Aya Mansour
- Biocatalysis and Biosynthesis Research Unit, Foundational Science Research Division, Royal Scientific Society, Amman 11941, Jordan
| |
Collapse
|
25
|
Gomes Gradíssimo D, Pereira Xavier L, Valadares Santos A. Cyanobacterial Polyhydroxyalkanoates: A Sustainable Alternative in Circular Economy. Molecules 2020; 25:E4331. [PMID: 32971731 PMCID: PMC7571216 DOI: 10.3390/molecules25184331] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/29/2020] [Revised: 07/16/2020] [Accepted: 07/21/2020] [Indexed: 01/11/2023] Open
Abstract
Conventional petrochemical plastics have become a serious environmental problem. Its unbridled use, especially in non-durable goods, has generated an accumulation of waste that is difficult to measure, threatening aquatic and terrestrial ecosystems. The replacement of these plastics with cleaner alternatives, such as polyhydroxyalkanoates (PHA), can only be achieved by cost reductions in the production of microbial bioplastics, in order to compete with the very low costs of fossil fuel plastics. The biggest costs are carbon sources and nutrients, which can be appeased with the use of photosynthetic organisms, such as cyanobacteria, that have a minimum requirement for nutrients, and also using agro-industrial waste, such as the livestock industry, which in turn benefits from the by-products of PHA biotechnological production, for example pigments and nutrients. Circular economy can help solve the current problems in the search for a sustainable production of bioplastic: reducing production costs, reusing waste, mitigating CO2, promoting bioremediation and making better use of cyanobacteria metabolites in different industries.
Collapse
Affiliation(s)
- Diana Gomes Gradíssimo
- Post Graduation Program in Biotechnology, Institute of Biological Sciences, Universidade Federal do Pará, Augusto Corrêa Street, Guamá, Belém, PA 66075-110, Brazil
- Laboratory of Biotechnology of Enzymes and Biotransformations, Institute of Biological Sciences, Universidade Federal do Pará, Augusto Corrêa Street, Guamá, Belém, PA 66075-110, Brazil;
| | - Luciana Pereira Xavier
- Laboratory of Biotechnology of Enzymes and Biotransformations, Institute of Biological Sciences, Universidade Federal do Pará, Augusto Corrêa Street, Guamá, Belém, PA 66075-110, Brazil;
| | - Agenor Valadares Santos
- Post Graduation Program in Biotechnology, Institute of Biological Sciences, Universidade Federal do Pará, Augusto Corrêa Street, Guamá, Belém, PA 66075-110, Brazil
- Laboratory of Biotechnology of Enzymes and Biotransformations, Institute of Biological Sciences, Universidade Federal do Pará, Augusto Corrêa Street, Guamá, Belém, PA 66075-110, Brazil;
| |
Collapse
|
26
|
Vostrejs P, Adamcová D, Vaverková MD, Enev V, Kalina M, Machovsky M, Šourková M, Marova I, Kovalcik A. Active biodegradable packaging films modified with grape seeds lignin. RSC Adv 2020; 10:29202-29213. [PMID: 35521111 PMCID: PMC9055960 DOI: 10.1039/d0ra04074f] [Citation(s) in RCA: 26] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/06/2020] [Accepted: 07/21/2020] [Indexed: 11/21/2022] Open
Abstract
Biodegradable packaging materials represent one possible solution for how to reduce the negative environmental impact of plastics. The main idea of this work was to investigate the possibility of utilizing grape seed lignin for the modification of polyhydroxyalkanoates with the use of its antioxidant capacity in packaging films. For this purpose, polymeric films based on the blend of high crystalline poly(3-hydroxybutyrate) (PHB) and amorphous polyhydroxyalkanoate (PHA) were prepared. PHB/PHA films displayed Young modulus of 240 MPa, tensile strength at a maximum of 6.6 MPa and elongation at break of 95.2%. The physical properties of PHB/PHA films were modified by the addition of 1-10 wt% of grape seeds lignin (GS-L). GS-L lignin showed a high antioxidant capacity: 238 milligrams of Trolox equivalents were equal to one gram of grape seeds lignin. The incorporation of grape seeds lignin into PHB/PHA films positively influenced their gas barrier properties, antioxidant activity and biodegradability. The values of oxygen and carbon dioxide transition rate of PHB/PHA with 1 wt% of GS-L were 7.3 and 36.3 cm3 m-2 24 h 0.1 MPa, respectively. The inhibition percentage of the ABTS radical determined in PHB/PHA/GS-L was in the range of 29.2% to 100% depending on the lignin concentration. The biodegradability test carried out under controlled composting environment for 90 days showed that the PHB/PHA film with 50 w/w% of amorphous PHA reached the degradability degree of 68.8% being about 26.6% higher decomposition than in the case of neat high crystalline PHB film. The degradability degree of PHA films in compost within the tested period reflected the modification of the semi-crystalline character and varied with the incorporated lignin. From the toxicological point of view, the composts obtained after biodegradation of PHA films proved the non-toxicity of PHB/PHA/GS-L materials and its degradation products showed a positive effect on white mustard (Sinapis alba L.) seeds germination.
Collapse
Affiliation(s)
- Pavel Vostrejs
- Department of Food Chemistry and Biotechnology, Faculty of Chemistry, Brno University of Technology Purkynova 118 612 00 Brno Czech Republic
| | - Dana Adamcová
- Department of Applied and Landscape Ecology, Faculty of AgriSciences, Mendel University in Brno Zemědělská 1 613 00 Brno Czech Republic
| | - Magdalena Daria Vaverková
- Department of Applied and Landscape Ecology, Faculty of AgriSciences, Mendel University in Brno Zemědělská 1 613 00 Brno Czech Republic
- Institute of Civil Engineering, Warsaw University of Life Sciences - SGGW Nowoursynowska 159m 02 776 Warsaw Poland
| | - Vojtech Enev
- Department of Physical and Applied Chemistry, Faculty of Chemistry, Brno University of Technology Purkynova 118 612 00 Brno Czech Republic
| | - Michal Kalina
- Department of Physical and Applied Chemistry, Faculty of Chemistry, Brno University of Technology Purkynova 118 612 00 Brno Czech Republic
| | - Michal Machovsky
- Centre of Polymer Systems, Tomas Bata University in Zlín Třída Tomáše Bati 5678 760 01 Zlin Czech Republic
| | - Markéta Šourková
- Department of Applied and Landscape Ecology, Faculty of AgriSciences, Mendel University in Brno Zemědělská 1 613 00 Brno Czech Republic
| | - Ivana Marova
- Department of Food Chemistry and Biotechnology, Faculty of Chemistry, Brno University of Technology Purkynova 118 612 00 Brno Czech Republic
| | - Adriana Kovalcik
- Department of Food Chemistry and Biotechnology, Faculty of Chemistry, Brno University of Technology Purkynova 118 612 00 Brno Czech Republic
| |
Collapse
|
27
|
Pettinelli N, Rodríguez-Llamazares S, Farrag Y, Bouza R, Barral L, Feijoo-Bandín S, Lago F. Poly(hydroxybutyrate-co-hydroxyvalerate) microparticles embedded in κ-carrageenan/locust bean gum hydrogel as a dual drug delivery carrier. Int J Biol Macromol 2019; 146:110-118. [PMID: 31881300 DOI: 10.1016/j.ijbiomac.2019.12.193] [Citation(s) in RCA: 36] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2019] [Revised: 12/12/2019] [Accepted: 12/21/2019] [Indexed: 12/21/2022]
Abstract
A novel composite hydrogel was prepared as a dual drug delivery carrier. Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) microparticles were prepared to encapsulate simultaneously ketoprofen and mupirocin, as hydrophobic drug models. These microparticles were embedded in a physically crosslinked hydrogel of κ-carrageenan/locust bean gum. This composite hydrogel showed for both drugs a slower release than the obtained release from microparticles and hydrogel separately. The release of both drugs was observed during a period of 7 days at 37 °C. Different kinetic models were analyzed and the results indicated the best fitting to a Higuchi model suggesting that the release was mostly controlled by diffusion. Also, the drug loaded microparticles were spherical with average mean particle size of 1.0 μm, mesoporous, and distributed homogeneously in the hydrogel. The composite hydrogel showed a thermosensitive swelling behavior reaching 183% of swelling ratio at 37 °C. The composite hydrogel showed the elastic component to be higher than the viscous component, indicating characteristics of a strong hydrogel. The biocompatibility was evaluated with in vitro cytotoxicity assays and the results indicated that this composite hydrogel could be considered as a potential biomaterial for dual drug delivery, mainly for wound healing applications.
Collapse
Affiliation(s)
- Natalia Pettinelli
- Universidade da Coruña, Grupo de Polímeros, Departamento de Física y Ciencias de la Tierra, Escuela Universitaria Politécnica, Serantes, Avda. 19 de Febrero s/n, 15471 Ferrol, Spain
| | - Saddys Rodríguez-Llamazares
- Centro de Investigación de Polímeros Avanzados, Edificio Laboratorio CIPA, Av. Collao 1202, Concepcion, Chile
| | - Yousof Farrag
- Universidade da Coruña, Grupo de Polímeros, Departamento de Física y Ciencias de la Tierra, Escuela Universitaria Politécnica, Serantes, Avda. 19 de Febrero s/n, 15471 Ferrol, Spain
| | - Rebeca Bouza
- Universidade da Coruña, Grupo de Polímeros, Departamento de Física y Ciencias de la Tierra, Escuela Universitaria Politécnica, Serantes, Avda. 19 de Febrero s/n, 15471 Ferrol, Spain.
| | - Luis Barral
- Universidade da Coruña, Grupo de Polímeros, Departamento de Física y Ciencias de la Tierra, Escuela Universitaria Politécnica, Serantes, Avda. 19 de Febrero s/n, 15471 Ferrol, Spain
| | - Sandra Feijoo-Bandín
- Cellular and Molecular Cardiology Research Unit, Institute of Biomedical Research (IDIS-SERGAS), University Clinical Hospital, Santiago de Compostela, Spain; Center for Biomedical Research Network in Cardiovascular Diseases (CIBERCV), Madrid, Spain
| | - Francisca Lago
- Cellular and Molecular Cardiology Research Unit, Institute of Biomedical Research (IDIS-SERGAS), University Clinical Hospital, Santiago de Compostela, Spain; Center for Biomedical Research Network in Cardiovascular Diseases (CIBERCV), Madrid, Spain
| |
Collapse
|
28
|
Arza CR, Wang P, Linares‐Pastén J, Zhang B. Synthesis, thermal, rheological characteristics, and enzymatic degradation of aliphatic polyesters with lignin‐based aromatic pendant groups. ACTA ACUST UNITED AC 2019. [DOI: 10.1002/pola.29534] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Carlos R. Arza
- Centre of Analysis and Synthesis, Department of ChemistryLund University P.O. Box 124, SE‐22100 Lund Sweden
| | - Ping Wang
- Centre of Analysis and Synthesis, Department of ChemistryLund University P.O. Box 124, SE‐22100 Lund Sweden
| | - Javier Linares‐Pastén
- Division of Biotechnology, Department of ChemistryLund University P.O.Box 124, 22100 Lund Sweden
| | - Baozhong Zhang
- Centre of Analysis and Synthesis, Department of ChemistryLund University P.O. Box 124, SE‐22100 Lund Sweden
| |
Collapse
|
29
|
Cichoń E, Haraźna K, Skibiński S, Witko T, Zima A, Ślósarczyk A, Zimowska M, Witko M, Leszczyński B, Wróbel A, Guzik M. Novel bioresorbable tricalcium phosphate/polyhydroxyoctanoate (TCP/PHO) composites as scaffolds for bone tissue engineering applications. J Mech Behav Biomed Mater 2019; 98:235-245. [PMID: 31277039 DOI: 10.1016/j.jmbbm.2019.06.028] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/23/2019] [Revised: 06/09/2019] [Accepted: 06/27/2019] [Indexed: 12/31/2022]
Abstract
Development of new composite materials for bone tissue engineering is a constantly growing field of medicine. Therefore there is a continuous need in creating novel materials that can not only regenerate the defected tissue but also nourish it while the healing process progresses. Here we present a novel type of composite material that fulfils these requirements. The study describes creation of a composite with macroporous bioceramic core that is infiltrated with a thin biopolymer layer. The ceramic component, namely tricalcium phosphate (TCP), due to its mechanistic and bioactive properties may promote new bone creation as shown through the in vitro studies. To the best of our knowledge the coating layer was created for the first time from a representative of bacterially derived medium chain length polyhydroxyalkanoate polymers (mcl-PHA), namely polyhydroxyoctanoate (PHO). This polymer layer not only profoundly changed the stress-strain characteristics of the bioceramic foam but also released (R)-3-hydroxyacids and their dimers/trimers to the investigated environment. In the manuscript we have in depth characterised these materials employing a set of basic procedures, through 3D structure reconstruction and finishing with prolonged in vitro experiments.
Collapse
Affiliation(s)
- Ewelina Cichoń
- Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Mickiewicza Av. 30, 30-059 Kraków, Poland
| | - Katarzyna Haraźna
- Jerzy Haber Institute of Catalysis and Surface Chemistry Polish Academy of Sciences, Niezapominajek 8, 30-239 Kraków, Poland
| | - Szymon Skibiński
- Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Mickiewicza Av. 30, 30-059 Kraków, Poland
| | - Tomasz Witko
- Faculty of Physics, Astronomy and Applied Computer Science, Jagiellonian University, Łojasiewicza 11, 30-348 Kraków, Poland
| | - Aneta Zima
- Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Mickiewicza Av. 30, 30-059 Kraków, Poland
| | - Anna Ślósarczyk
- Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Mickiewicza Av. 30, 30-059 Kraków, Poland
| | - Małgorzata Zimowska
- Jerzy Haber Institute of Catalysis and Surface Chemistry Polish Academy of Sciences, Niezapominajek 8, 30-239 Kraków, Poland
| | - Małgorzata Witko
- Jerzy Haber Institute of Catalysis and Surface Chemistry Polish Academy of Sciences, Niezapominajek 8, 30-239 Kraków, Poland
| | - Bartosz Leszczyński
- Faculty of Physics, Astronomy and Applied Computer Science, Jagiellonian University, Łojasiewicza 11, 30-348 Kraków, Poland
| | - Andrzej Wróbel
- Faculty of Physics, Astronomy and Applied Computer Science, Jagiellonian University, Łojasiewicza 11, 30-348 Kraków, Poland
| | - Maciej Guzik
- Jerzy Haber Institute of Catalysis and Surface Chemistry Polish Academy of Sciences, Niezapominajek 8, 30-239 Kraków, Poland.
| |
Collapse
|
30
|
Elmowafy E, Abdal-Hay A, Skouras A, Tiboni M, Casettari L, Guarino V. Polyhydroxyalkanoate (PHA): applications in drug delivery and tissue engineering. Expert Rev Med Devices 2019; 16:467-482. [PMID: 31058550 DOI: 10.1080/17434440.2019.1615439] [Citation(s) in RCA: 73] [Impact Index Per Article: 14.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
INTRODUCTION The applications of naturally obtained polymers are tremendously increased due to them being biocompatible, biodegradable, environmentally friendly and renewable in nature. Among them, polyhydroxyalkanoates are widely studied and they can be utilized in many areas of human life research such as drug delivery, tissue engineering, and other medical applications. AREAS COVERED This review provides an overview of the polyhydroxyalkanoates biosynthesis and their possible applications in drug delivery in the range of micro- and nano-size. Moreover, the possible applications in tissue engineering are covered considering macro- and microporous scaffolds and extracellular matrix analogs. EXPERT COMMENTARY The majority of synthetic plastics are non-biodegradable so, in the last years, a renewed interest is growing to develop alternative processes to produce biologically derived polymers. Among them, PHAs present good properties such as high immunotolerance, low toxicity, biodegradability, so, they are promisingly using as biomaterials in biomedical applications.
Collapse
Affiliation(s)
- Enas Elmowafy
- a Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy , Ain Shams University , Cairo , Egypt
| | - Abdalla Abdal-Hay
- b Dentistry and Oral Health School , The University of Queensland , Qld , Australia
| | - Athanasios Skouras
- c Department of Biomolecular Sciences , University of Urbino , Urbino (PU) , Italy.,d Department of Life Sciences , School of Sciences, European University Cyprus , Nicosia , Cyprus
| | - Mattia Tiboni
- c Department of Biomolecular Sciences , University of Urbino , Urbino (PU) , Italy
| | - Luca Casettari
- c Department of Biomolecular Sciences , University of Urbino , Urbino (PU) , Italy
| | - Vincenzo Guarino
- e Institute of Polymers, composites and Biomaterials , National Research Council of Italy , Naples , Italy
| |
Collapse
|
31
|
Raza ZA, Tariq MR, Majeed MI, Banat IM. Recent developments in bioreactor scale production of bacterial polyhydroxyalkanoates. Bioprocess Biosyst Eng 2019; 42:901-919. [PMID: 30810810 DOI: 10.1007/s00449-019-02093-x] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/27/2018] [Accepted: 02/17/2019] [Indexed: 12/21/2022]
Abstract
Polyhydroxyalkanoates (PHAs) are biological plastics that are sustainable alternative to synthetic ones. Numerous microorganisms have been identified as PHAs producers. They store PHAs as cellular inclusions to use as an energy source backup. They can be produced in shake flasks and in bioreactors under defined fermentation and physiological culture conditions using suitable nutrients. Their production at bioreactor scale depends on various factors such as carbon source, nutrients supply, temperature, dissolved oxygen level, pH, and production modes. Once produced, PHAs find diverse applications in multiple fields of science and technology particularly in the medical sector. The present review covers some recent developments in sustainable bioreactor scale production of PHAs and identifies some areas in which future research in this field might be focused.
Collapse
Affiliation(s)
- Zulfiqar Ali Raza
- Department of Applied Sciences, National Textile University, Faisalabad, 37610, Pakistan.
| | - Muhammad Rizwan Tariq
- Department of Applied Sciences, National Textile University, Faisalabad, 37610, Pakistan.,Department of Chemistry, University of Agriculture, Faisalabad, Pakistan
| | | | - Ibrahim M Banat
- School of Biomedical Sciences, University of Ulster, Coleraine, Northern Ireland, BT52 1SA, UK
| |
Collapse
|
32
|
Butt FI, Muhammad N, Hamid A, Moniruzzaman M, Sharif F. Recent progress in the utilization of biosynthesized polyhydroxyalkanoates for biomedical applications – Review. Int J Biol Macromol 2018; 120:1294-1305. [DOI: 10.1016/j.ijbiomac.2018.09.002] [Citation(s) in RCA: 53] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/11/2018] [Revised: 07/20/2018] [Accepted: 09/02/2018] [Indexed: 01/10/2023]
|