Addition of silver nanoparticles to the zinc ferrite/polyaniline composition for boosting its visible photocatalytic degradation

Enhancing the photocatalytic activity of ZnFe2O4 with a good energy band gap to degrade industrial waste under sunlight illumination can help to develop green environments. Here, to improve the photocatalytic efficiency of ZnFe2O4 ferrites, they were merged with polyaniline (PAni) and silver (Ag) nanoparticles to synthesize Ag@ZnFe2O4-PAni plasmonic nanostructures. The as-synthesized nanostructures were characterized using a series of advanced characterization techniques to confirm successful formation and investigate photocatalytic improvement origins. It was found that incorporating Ag NPs along with the PAni to ZnFe2O4 increases its absorption power and red-shifts its energy band gap, which increases the electron-hole production rate by exposure to light in ZnFe2O4. Contribution of the surface plasmon resonance effect of Ag NPs and conjugated double bonds of PAni to charge transfer mechanisms in Ag@ZnFe2O4-PAni material increased charge separation during photocatalytic process, boosting the photodegradation performance of ZnFe2O4.

Construction of Ag/CdZnS QDs nanocomposite for enhanced visible light photoinactivation of Staphylococcus aureus

With increasing use of antibiotics, the development of antibiotic-resistant pathogens poses a serious threat to human health and the environment. Photocatalytic inactivation of these harmful pathogens is one of the novel and non-antibiotic treatments. The study fabricated Ag NPs decorated CdZnS QDs via a facile and biological co-precipitation method using L. camara plant extract as a green alternative to treat the toxic chemicals. The fabricated Ag/CdZnS QDs (NCs) were prepared for the efficient treatment of antibiotic-resistant pathogens as they raise a major global concern. The fabricated NCs were characterized with various characterization techniques to verify its physicochemical properties. The fabricated NCs have shown excellent photo-sterilization performance of 97 % against S. aureus. The excellent activity was attributed to the decoration of Ag NPs on CdZnS QDs as it helped in shortening band gap, improved visible light absorption ability, increased active sites, and boosted photogenerated electron/hole pairs stability. Radical trapping experiment and ESR analysis indicated the involvement of •OH and h+ in the photoinactivation of bacteria. The photo sterilization reaction of NCs was carried out under different environmental conditions, including light and dark conditions and different pH conditions. The experiment was carried out in sewage-treated water in order to test the real-time application, and the fabricated NCs achieved excellent 95.9 % photo-inactivation of S. aureus cells in sewage treated water and the Chemical Oxygen Demand (COD) of the system was increased after photo inactivation treatment. The fabricated NCs have also shown excellent reusable efficiency of 95% after six runs and the photostability and anti-corrosive nature of NCs were confirmed. The study provides an insight for the employment of photocatalysis for the sterilization of pathogens in real time aquatic environment across the globe.

Mid-IR Light-Activatable Full Spectrum LaB6 Plasmonic Photocatalyst

Photocatalysts as long-lasting, benign reagents for disinfection of bacteria in hospitals and public areas/facilities/transportation vehicles are strongly needed. A common limitation for all existing semiconductor photocatalysts is the requirement of activation by external UV-vis-near-infrared (NIR) light with wavelengths shorter than ≈1265 nm. None of the existing photocatalysts can function during nighttime in the absence of external light. Herein, an unprecedented LaB6 plasmonic photocatalyst is reported, which can absorb UV-vis-NIR light and mid-IR (3900 nm) light to split water and generate hydrogen and hydroxyl radicals for the decomposition of organic pollutants, as well as kill multidrug-resistant Escherichia coli bacteria. Mid-IR light (≈2-50 µm) is readily available from the natural environments via thermal radiation of warm/hot objects on the earth including human bodies, animals, furnances, hot/warm electrical devices, and buildings.

One-step preparation, characterization, and anticancer potential of ZnFe2O4/RGO nanocomposites

Zinc ferrite nanoparticles (ZnFe2O4 NPs) have attracted extensive attention for their diverse applications including sensing, waste-water treatment, and biomedicine. The novelty of the present work is the fabrication of ZnFe2O4/RGO NCs by using a one-step hydrothermal process to assess the influence of RGO doping on the physicochemical properties and anticancer efficacy of ZnFe2O4 NPs. X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy-dispersive X-ray(EDX), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), UV-vis spectroscopy, and Photoluminescence (PL) spectroscopy were employed to characterize prepared pure ZnFe2O4 NPs and ZnFe2O4/ RGO NCs. XRD results showed that the synthesized samples have high crystallinity. Furthermore, the average crystal sizes of ZnFe2O4 nanoparticles (NPs) and ZnFe2O4/RGO nanocomposites (NCs) were 51.08 nm and 54.36 nm, respectively. SEM images revealed that pure ZnFe2O4 NPs were spherical in shape with uniformly loaded on the surface of the RGO nanosheet. XPS and EDX analysis confirmed the elemental compositions of ZnFe2O4/RGO NCs. Elemental mapping of SEM shows that the elemental compositions (Zn, Fe, O, and C) were homogeneously distributed in ZnFe2O4/RGO NCs. The intensity of FT-IR spectra depicted that pure ZnFe2O4 NPs were successfully anchored into the RGO nanosheet. An optical study suggested that the band gap energy of ZnFe2O4/RGO NCs (1.61 eV) was lower than that of pure ZnFe2O4 NPs (1.96 eV). PL spectra indicated that the recombination rate of the ZnFe2O4/ RGO NCs was lower than ZnFe2O4 NPs. MTT assay was used to evaluate the anticancer performance of ZnFe2O4 /RGO NCs and pure ZnFe2O4NPs against human cancer cells. In vitro study indicates that ZnFe2O4 /RGO NCs have higher anticancer activity against human breast (MCF-7) and lung (A549) cancer cells as compared to pure form ZnFe2O4 NPs. This work suggests that RGO doping enhances the anticancer activity of ZnFe2O4NPs by tuning its optical behavior. This study warrants future research on potential therapeutic applications of these types of nanocomposites.

Acylhydrazone functionalized naphthalene-based self-assembled supramolecular gels for efficient fluorescence detection of Fe3

A new gel factor (named N) has been successfully designed and synthesized, which contains the conventional fluorophore naphthalene with the acylhydrazone bond as the self-assembly site. It can be self-assembled into stable organogels (named ON) in dimethyl sulfoxide (DMSO) and water mixed medium (V : V = 4 : 1) with a critical gel temperature and concentration (55 °C and 10 mg mL-1). Interestingly, under 365 nm UV light, the ON exhibits bright yellow Aggregation Induced Emission (AIE). The supramolecular organogel ON shows a fluorescent "OFF" response to the metal ions Fe3+, and the state of the gel ON remains constant before and after detection. Notably, the minimum detection limits (LODs) of the gel ON for Fe3+ are as low as 1.30 × 10-7 M. The binding mechanism of supramolecular organogels (ON) to ions has been investigated through a series of characterizations. Meanwhile, the organogel sensor ON can also be used as an ion-responsive membrane for the detection of Fe3+ in the aqueous phase.

Influence of CoOx surface passivation and Sn/Zr-co-doping on the photocatalytic activity of Fe2O3 nanorod photocatalysts for bacterial inactivation and photo-Fenton degradation

Hydrothermal and wet impregnation methods are presented in this study for synthesizing CoO_x(1 wt%)/Sn-Zr codoped-Fe₂O₃ nanorod photocatalysts for the degradation of organic pollutants and deactivation of bacteria. A hydrothermal route was used to synthesize self-assembled rod-like hierarchical structures of Sn(0-6%) doped Zr-Fe₂O₃ NRs. Additionally, a wet impregnation method was used to load CoO_x onto the surface of photocatalysts (Sn(0-6%)-doped Zr-Fe₂O₃ NRs). A series of 1 wt% CoO_x modified Sn(0-6%)-doped Zr-Fe₂O₃ NRs were synthesized, characterized, and utilized for the photocatalytic decomposition of organic contaminants, along with the killing of E. coli and S. aureus. In comparison with 0, 2, and 6% Sn co-doped Zr-Fe₂O₃ NRs, the CoO_x(1 wt%)/4%Sn/Zr-Fe₂O₃ NRs photocatalyst exhibited an E. coli and S. aureus inactivation efficiencies (90 and 98%). A bio-TEM study of treated and untreated bacterial cells revealed that the CoO_x(1 wt%)/4%Sn/Zr-Fe₂O₃ NRs photocatalyst led to considerable changes in the bacterial cell membranes' morphology. The optimal CoO_x(1 wt%)/Sn(4%) co-doped Zr-Fe₂O₃ NRs photocatalyst achieved degradation efficiencies of 98.5% and 94.6% for BPA and orange II dye. As a result, this work will provide a facile and effective method for developing visible light-active photocatalysts for bacterial inactivation and organic pollutants degradation.

Tocopherol-assisted magnetic Ag-Fe3O4-TiO2 nanocomposite for photocatalytic bacterial-inactivation with elucidation of mechanism and its hazardous level assessment with zebrafish model

In recent years, many endeavours have been prompted with photocatalytic nanomaterials by the need to eradicate pathogenic microorganisms from water bodies. Herein, a tocopherol-assisted Ag-Fe₃O₄-TiO₂ nanocomposite (TAFTN) was synthesized for photocatalytic bacterial inactivation. The prepared TAFTN became active under sunlight due to its narrowed bandgap, inactivating the bacterial contaminants via photo-induced ROS stress. The ROS radicals destroy bacteria by creating oxidative stress, which damages the cell membrane and cellular components such as nucleic acids and proteins. For the first time, the nano-LC-MS/MS-based quantitative proteomics reveals that the disrupted proteins are involved in a variety of cellular functions; the most of these are involved in the metabolic pathway, eventually leading to bacterial death during TAFTN-photocatalysis under sunlight. Furthermore, the toxicity analysis confirmed that the inactivated bacteria seemed to have no detrimental impact on zebrafish model, showing that the disinfected water via TAFTN-photocatalysis is enormously safe. Furthermore, the TAFTN-photocatalysis successfully killed the bacterial cells in natural seawater, indicating the consistent photocatalytic efficacy when recycled repeatedly. The results of this work demonstrate that the produced nanocomposite might be a powerful recyclable and sunlight-active photocatalyst for environmental water treatment.

High-Pressure-Induced Sublethal Injuries of Food Pathogens-Microscopic Assessment

High Hydrostatic Pressure (HHP) technology is considered an alternative method of food preservation. Nevertheless, the current dogma is that HHP might be insufficient to preserve food lastingly against some pathogens. Incompletely damaged cells can resuscitate under favorable conditions, and they may proliferate in food during storage. This study was undertaken to characterize the extent of sublethal injuries induced by HHP (300-500 MPa) on Escherichia coli and Listeria inncua strains. The morphological changes were evaluated using microscopy methods such as Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Epifluorescence Microscopy (EFM). The overall assessment of the physiological state of tested bacteria through TEM and SEM showed that the action of pressure on the structure of the bacterial membrane was almost minor or unnoticeable, beyond the L. innocua wild-type strain. However, alterations were observed in subcellular structures such as the cytoplasm and nucleoid for both L. innocua and E. coli strains. More significant changes after the HHP of internal structures were reported in the case of wild-type strains isolated from raw juice. Extreme condensation of the cytoplasm was observed, while the outline of cells was intact. The percentage ratio between alive and injured cells in the population was assessed by fluorescent microscopy. The results of HHP-treated samples showed a heterogeneous population, and red cell aggregates were observed. The percentage ratio of live and dead cells (L/D) in the L. innocua collection strain population was higher than in the case of the wild-type strain (69%/31% and 55%/45%, respectively). In turn, E. coli populations were characterized with a similar L/D ratio. Half of the cells in the populations were distinguished as visibly fluorescing red. The results obtained in this study confirmed sublethal HHP reaction on pathogens cells.

Visible-Light-Active CuO x -Loaded Mo-BiVO4 Photocatalyst for Inactivation of Harmful Bacteria (Escherichia coli and Staphylococcus aureus) and Degradation of Orange II Dye

In the present study, Mo-BiVO4-loaded and metal oxide (MO: Ag2Ox, CoOx, and CuOx)-loaded Mo-BiVO4 photocatalysts were synthesized using a wet impregnation method and applied for microbial inactivation (Escherichia coli and Staphylococcus aureus) and orange II dye degradation under visible-light (VL) conditions (λ ≥ 420 nm). The amount of MO cocatalysts loaded onto the surface of the Mo-BiVO4 photocatalysts was effectively controlled by varying their weight percentages (i.e., 1-3 wt %). Among the pure Mo-BiVO4, Ag2Ox-, CoOx-, and CuOx-loaded Mo-BiVO4 photocatalysts used in bacterial E. coli and S. aureus inactivation under VL irradiation, the 2 wt % CuOx-loaded Mo-BiVO4 photocatalyst showed the highest degradation efficiency of E. coli (97%) and S. aureus (99%). Additionally, the maximum orange II dye degradation efficiency (80.2%) was achieved over the CuOx (2 wt %)-loaded Mo-BiVO4 photocatalysts after 5 h of radiation. The bacterial inactivation results also suggested that the CuO x -loaded Mo-BiVO4 nanostructure has significantly improved antimicrobial ability as compared to CuOx/BiVO4. The enhancement of the inactivation performance of CuOx-loaded Mo-BiVO4 can be attributed to the synergistic effect of Mo doping and Cu2+ ions in CuOx, which further acted as an electron trap on the surface of Mo-BiVO4 and promoted fast transfer and separation of the photoelectron (e-)/hole (h+) pairs for growth of reactive oxygen species (ROS). Furthermore, during the bacterial inactivation process, the ROS can disrupt the plasma membrane and destroy metabolic pathways, leading to bacterial cell death. Therefore, we provide a novel idea for visible-light-activated photocatalytic antibacterial approach for future disinfection applications.

Critical review of photocatalytic disinfection of bacteria: from noble metals- and carbon nanomaterials-TiO2 composites to challenges of water characteristics and strategic solutions

This critical review covers ways to improve TiO₂-based photocatalysts, how water characteristics may affect photocatalytic disinfection, and strategies to tackle the challenges arising from water characteristics. Photocatalysis has shown much promise in the disinfection of water/wastewater, because photocatalysis does not produce toxic by-products, and is driven by green solar energy. There are however several drawbacks that are curbing the prevalence of photocatalytic disinfection applications: one, the efficiency of photocatalysts may limit popular utilization; two, the water characteristics may present some challenges to the process. TiO₂-based photocatalysts may be readily improved if composited with noble metals or carbon nanomaterials. Noble metals give TiO₂-based composites a higher affinity for dissolved oxygen, and induce plasmonic and Schottky effects in the TiO₂; carbon nanomaterials with a tunable structure, on the other hand, give the composites an improved charge carrier separation performance. Other than photocatalyst materials, the characteristics of water/wastewater is another crucial factor in the photocatalysis process. Also examined in this review are the crucial impacts that water characteristics have on photocatalysts and their interaction with bacteria. Accordingly, strategies to address the challenge of water characteristics on photocatalytic disinfection are explored: one, to modify the semiconductor conduction band to generate long-lifetime reactive species; two, to improve the interaction between bacteria and photocatalysts.

Green photocatalytic disinfection of real sewage: efficiency evaluation and toxicity assessment of eco-friendly TiO2-based magnetic photocatalyst under solar light

To evaluate the green photocatalytic disinfection for practical applications, disinfection of different types of real sewage using magnetic photocatalyst RGO/Fe,N-TiO₂/Fe₃O₄@SiO₂ (RGOFeNTFS) under simulated solar light was investigated: low-salinity sewage after tertiary treatment, low-salinity sewage after secondary biological treatment, high-salinity sewage after secondary biological treatment, and high-salinity sewage after chemically enhanced primary treatment. The classification of the sewage as high and low-salinity is based on the regions of sewage source that use seawater and freshwater for toilet flushing, respectively. It shows potential of solar-light-driven photocatalytic disinfection in low-salinity sewage: around 20 min (for sewage after tertiary treatment) and 45 min (for sewage after secondary treatment) of photocatalytic disinfection are required for sewage to meet the discharge standard, and no bacterial regrowth is observed in the treated sewage after 48 h. However, due to the poorer water quality, the high-salinity sewage requires a relatively long reaction time (more than 240 min) to meet the discharge standard, showing minimal practical significance. Further, the complex characteristics of real sewage, such as organic matter, suspended matter, multivalent-ions, pH and DO level significantly influence photocatalytic disinfection, and should be carefully reviewed in evaluating the photocatalytic disinfection of sewage. Besides, RGOFeNTFS shows a good reusability over three cycles for photocatalytic disinfection of low-salinity sewage samples. Moreover, the non-toxicity, indicated by phytoplankton in seawater, of both RGOFeNTFS (<= 3 g/L) and treated low-salinity sewage demonstrates the feasibility of the practical application of photocatalytic disinfection using RGOFeNTFS under irradiation of solar light.

2D Nanocomposite Membranes: Water Purification and Fouling Mitigation

In this study, the characteristics of different types of nanosheet membranes were reviewed in order to determine which possessed the optimum propensity for antifouling during water purification. Despite the tremendous amount of attention that nanosheets have received in recent years, their use to render membranes that are resistant to fouling has seldom been investigated. This work is the first to summarize the abilities of nanosheet membranes to alleviate the effect of organic and inorganic foulants during water treatment. In contrast to other publications, single nanosheets, or in combination with other nanomaterials, were considered to be nanostructures. Herein, a broad range of materials beyond graphene-based nanomaterials is discussed. The types of nanohybrid membranes considered in the present work include conventional mixed matrix membranes, stacked membranes, and thin-film nanocomposite membranes. These membranes combine the benefits of both inorganic and organic materials, and their respective drawbacks are addressed herein. The antifouling strategies of nanohybrid membranes were divided into passive and active categories. Nanosheets were employed in order to induce fouling resistance via increased hydrophilicity and photocatalysis. The antifouling properties that are displayed by two-dimensional (2D) nanocomposite membranes also are examined.

Metal sensing-carbon dots loaded TiO2-nanocomposite for photocatalytic bacterial deactivation and application in aquaculture

Nowadays, bioactive nanomaterials have been attracted the researcher's enthusiasm in various fields. Herein, Diplocyclos palmatus leaf extract-derived green-fluorescence carbon dots (DP-CDs) were prepared using the hydrothermal method. Due to the strong fluorescence stability, the prepared DP-CDs were coated on filter-paper to make a fluorometric sensor-strip for Fe3+ detection. After, a bandgap-narrowed DP-CDs/TiO2 nanocomposite (DCTN) was prepared using the methanolic extract of D. palmatus. The prepared DCTN exhibited improved photocatalytic bacterial deactivation under sunlight irradiation. The DCTN-photocatalysis slaughtered V. harveyi cells by the production of reactive oxygen species, which prompting oxidative stress, damaging the cell membrane and cellular constituents. These results suggest the plausible mode of bactericidal action of DCTN-photocatalysis under sunlight. Further, the DCTN has shown potent anti-biofilm activity against V. harveyi, and thereby, DCTN extended the survival of V. harveyi-infected shrimps during the in vivo trial with Litopenaeus vannamei. Notably, this is the first report for the disinfection of V. harveyi-mediated acute-hepatopancreatic necrosis disease (AHPND) using nanocomposite. The reduced internal-colonization of V. harveyi on the hepatopancreas as well as the rescue action of the pathognomonic effect in the experimental animals demonstrated the anti-infection potential of DCTN against V. harveyi-mediated AHPND in aquaculture.

Piezo-activation of peroxymonosulfate for benzothiazole removal in water

Piezoelectricity, as a kind of physical phenomenon, is a coupling between a material's mechanical and electrical behavior. Herein, the local accumulated charges on the surface of piezoelectric material were used to break OO bond of peroxymonosulfate (PMS) to induce its activation for the benzothiazole (BTH) removal. Taking BaTiO₃ as a model piezocatalyst, up to 97 % of BTH was degraded within 30 min in BaTiO₃/PMS/force system, which was respective 40 %, 79 %, 83 % higher than that in BaTiO₃/force piezocatalysis, force/PMS oxidation, and BaTiO₃/PMS adsorption. A significant synergistic effect was observed since the reaction rate constant of BaTiO₃/PMS/force was 3 times higher than the sum of those later three processes. The possible activated mechanism was proposed based on reactive species analysis, DFT calculation and LCMS determination. The stability of the piezocatalyst and the treatment performance for real wastewater were studied to investigate the potential in practical applicability. All the results demonstrated that the BaTiO₃ piezoelectricity can efficiently activate PMS to enhance BTH removal, which is a promising strategy for PMS activation, as well as a valuable insight for the piezoelectrical application in wastewater remediation.

Antimicrobial Metal Nanomaterials: From Passive to Stimuli-Activated Applications

The development of antimicrobial drug resistance among pathogenic bacteria and fungi is one of the most significant health issues of the 21st century. Recently, advances in nanotechnology have led to the development of nanomaterials, particularly metals that exhibit antimicrobial properties. These metal nanomaterials have emerged as promising alternatives to traditional antimicrobial therapies. In this review, a broad overview of metal nanomaterials, their synthesis, properties, and interactions with pathogenic micro-organisms is first provided. Secondly, the range of nanomaterials that demonstrate passive antimicrobial properties are outlined and in-depth analysis and comparison of stimuli-responsive antimicrobial nanomaterials are provided, which represent the next generation of microbiocidal nanomaterials. The stimulus applied to activate such nanomaterials includes light (including photocatalytic and photothermal) and magnetic fields, which can induce magnetic hyperthermia and kinetically driven magnetic activation. Broadly, this review aims to summarize the currently available research and provide future scope for the development of metal nanomaterial-based antimicrobial technologies, particularly those that can be activated through externally applied stimuli.

Behavioral analysis of simultaneous photo-electro-catalytic degradation of antibiotic resistant E. coli and antibiotic via ZnO/CuI: a kinetic and mechanistic study

Visible light responsive semiconductor-based photocatalysis is known to be an efficient method for the disinfection of bacterial cells. Here, we address the issue of aqueous contamination by persistent pollutants such as antibiotics and antibiotic resistant bacteria (ARB) from an innovative angle. Simultaneous degradation of an antibiotic (chloramphenicol) and antibiotic resistant bacteria (chloramphenicol resistant E. coli) is performed to observe the effect of the presence of antibiotic in the reaction system when it is required for survival of the bacteria. A p-n junction-based ZnO/CuI composite is shown to demonstrate drastic enhancement in photocatalytic activity due to the inbuilt potential barrier suppressing charge carrier recombination. Moreover, an additional driving force for the suppression of recombination was provided by using a potential bias. Hydrothermally grown ZnO/CuI electrode films were characterized to assess optical, electrochemical, physicochemical and structural properties of the composite. Electrochemical impedance spectroscopy and diffuse reflectance spectroscopy were performed to obtain insights into the band bending, band edge potential, band gap and transmittance of the semiconductors. X-ray-based spectroscopic methods and zeta potential measurement demonstrated the surface properties and surface charges of the moieties in the reaction system, allowing us to deduce justifiable conclusions. A model based on the interaction of photogenerated radicals with the bacteria was developed and rate expressions were used to obtain the rate constants for the experimental results. Photoelectrocatalysis and photocatalysis followed first order rate kinetics; however, due to the unavailability of direct hole attack in photolysis, the electrolysis and electrocatalysis followed Langmuir-Hinshelwood kinetics. Bacterial disinfection was confirmed by K⁺ ion leaching and by structural changes in the membrane observed by FTIR of the cells after the reaction. We also addressed the issue of bacterial adhesion on the films restricting the mobility of radicals to interact with the bacteria, affecting the reusability of the catalyst films. The present work opens a wide avenue to discuss and address the improvement of the reusability of nanomaterial films for bacterial applications by controlling bacterial adhesion.

Simultaneous atrazine degradation and E. coli inactivation by UV/S2O82-/Fe2+ process under KrCl excilamp (222 nm) irradiation

This study is the first to reveal that the iron-catalyzed photo-activation of persulfate (UV/PS/Fe²⁺system) under mercury-free KrCl excilamp irradiation (222 nm) is capable of simultaneous degradation of an organic pollutant and inactivation of a microorganism in aqueous media using the herbicide atrazine (ATZ) and E. coli as model contaminants, respectively. Deionized water, natural water and wastewater effluents, contaminated with 4 mg/L ATZ and/or 10⁵ CFU/mL E. coli, were sequentially treated by direct UV, UV/PS and UV/PS/Fe²⁺ processes. Lowering the pH to 3.5 accelerated both the degradation and inactivation during the UV/PS/Fe²⁺ treatment of natural water. Comparison of the apparent UV dose-based pseudo first-order rate constants showed the negative effect of E. coli on ATZ degradation by decreasing rates in all of the examined water matrices. This can be due to the competitive effect between ATZ and bacterial cells for reactive oxygen species (ROS). By contrast, E. coli in the presence of ATZ was inactivated faster in natural water and wastewater (but not in deionized water), as compared to the case without ATZ. A scheme of possible synergistic inactivation under ROS exposure in water, containing ATZ, natural organic matter and chloride ions as primary constituents, was proposed. Radical scavenging experiments showed a major contribution of SO₄•^- to ATZ degradation by UV/PS/Fe²⁺ treatment of deionized water and natural water. The UV doses, required for 90% removal of ATZ from natural water and wastewater, achieve 160 mJ/cm² (pH 5.5) and concurrently provide 99.99% E. coli inactivation. These results make the UV/PS/Fe²⁺ system with narrow band UV light sources promising for simultaneous water treatment and disinfection.

Reusable magnetic Ag/Fe, N-TiO2/Fe3O4@SiO2 composite for simultaneous photocatalytic disinfection of E. coli and degradation of bisphenol A in sewage under visible light

A visible-light-driven and magnetic photocatalyst Ag/Fe,N-TiO₂/Fe₃O₄@SiO₂ (AgFeNTFS) was synthesized through a multi-step method. AgFeNTFS was tested for the photocatalytic disinfection of Escherichia coli (E. coli) and degradation of bisphenol A (BPA) under visible light irradiation, separately and simultaneously. The results showed that a 6.3-log reduction in cell density of E. coli was achieved and BPA (2 mg/L) was completely removed by AgFeNTFS in the separated photocatalytic processes within 120 min. In the simultaneous process, the photocatalytic disinfection of E. coli was not influenced in the presence of BPA, but the efficiency of BPA degradation was dropped by 10%. This was likely due to the competition for the same dominant reactive species of O₂^- and H₂O₂ between E. coli and BPA in the simultaneous process, as evidenced by the scavenger study and the interactions between the pollutants and AgFeNTFS. Moreover, the simultaneous photocatalytic activity of E. coli disinfection and BPA degradation by AgFeNTFS was investigated in the sewage obtained from a local wastewater treatment plant. The photocatalysis treated sewage could meet with the local disinfection discharge standard with a 3-log reduction of E. coli after 90 min, and a complete removal of BPA was achieved simultaneously after 360 min. Moreover, AgFeNTFS showed high magnetic separation efficiency and had a good reusability over three cycles for the simultaneous photocatalytic disinfection and degradation of BPA in both synthetic water and sewage. This study provides insights on the application of a reusable magnetic photocatalyst for simultaneous disinfection and degradation of BPA in sewage.

Nanomaterials for treating emerging contaminants in water by adsorption and photocatalysis: Systematic review and bibliometric analysis

Emerging contaminants in the aquatic environment have become a worldwide problem. Conventional wastewater treatment processes are ineffective for eliminating the emerging contaminants at trace concentrations. Nanomaterials possessing novel size-dependent properties, however, have shown great potential for removing these contaminants. Herein we reviewed nanomaterials reported for removing emerging contaminants by adsorption and/or photocatalysis, and their removal capacity, mechanism, and influencing factors are discussed. Meanwhile, a large-scale bibliometric analysis is conducted on the trends of the emerging contaminants, nanoadsorbents, nanophotocatalysts, and related research topics from the literature during 1998-2017.

Novel 2-(hydroxy)-naphthyl imino functionalized pillar[5]arene: a highly efficient supramolecular sensor for tandem fluorescence detection of Fe3+ and F− and the facile separation of Fe3+

A novel pillar[5]arene-based supramolecular sensor (AP5N) for tandem fluorescence detection of Fe³⁺ and F⁻ was successfully prepared. Interestingly, the sensor AP5N shows excellent facile separation property for Fe³⁺.