Gas-Responsive and Self-Powered Visual Composite Langmuir-Blodgett Films for Ultrathin Gas Sensors

The complex and variable environments are challenging the development of related detection and analysis. Ammonia (NH₃) and hydrogen chloride (HCl) gases are both commonly used in industry, but they are considered to be toxic and corrosive substances that can threaten human health and the environment. Therefore, it is necessary here to develop a convenient, sensitive, and reliable sensor device for acid-alkali gas detection. Herein, we propose the synthesis strategy of an ultrathin film gas sensor based on the pH-responsive, self-powered, and visible composite Langmuir-Blodgett (LB) films. In our work, the LB films with nanometric thicknesses are obtained based on the sensitive materials of two novel carbazole structural sensitizers (abbreviated as CS-35 and CS-37) and several dye molecules. The composite LB films are formed with Carbazole samples and dye molecules through hydrogen bonding, π-π stacking, synergistic electrostatic interactions, and hydrophobic interactions, existing as J-aggregate or H-aggregate. The formation of high-quality and uniform Langmuir films is confirmed with transmission electron microscope (TEM), UV-vis spectrum, atomic force microscopy (AFM), and other measurements. In addition, based on the simple protonation and deprotonation, the prepared LB films can be assembled into a visual sensor for the response of pH gases. The response is confirmed by the study of ultraviolet spectroscopy and electrical output in vertical contact separation mode, which potentially unlocks a sustainable future for the application of ultrathin self-powered gas sensors.

QCM-Based HCl Gas Detection on Dimethylamine-Functionalized Crosslinked Copolymer Films

In this work, sensing behaviors and mechanisms of two crosslinked copolymers with dimethylamine and dimethylamide functional groups were compared and investigated for their ability to detect hydrogen chloride (HCl) gas. The crosslinked copolymer films were photopolymerized on quartz crystal electrodes using a micro-contact printing technique. The gas sensing behaviors were analyzed by measuring resonant frequency (Δf) of quartz crystal microbalance (QCM). The HCl binding capacity of photopolymerized films, with a mass between 4.6 and 5.9 μg, was optimized. Under optimized film mass conditions, the poly(2-dimethylaminoethyl methacrylate-co-ethylene glycol dimethacrylate) (DMAEMA-co-EGDMA), poly(DMAEMA-co-EGDMA), film, C2-DMA, showed a 13.9-fold higher binding capacity than the poly(N,N-dimethylacrylamide-co-ethylene glycol dimethacrylate, poly(DMAA-co-EGDMA), film, C0-DMA, during HCl gas adsorption. HCl gas was effectively adsorbed on the C2-DMA film because of the formation of tertiary amine salts through protonation and strong ionic bonding. Furthermore, the C2-DMA film exhibited excellent sensitivity, of 2.51 (ng/μg) (1/ppm), and selectivity coefficient (k* = 12.6 for formaldehyde and 13.5 for hydrogen fluoride) compared to the C0-DMA film. According to the experimental results, and due to its high functionality and stability, the C2-DMA film-coated QC electrode could be used as an HCl gas sensor, with low-cost and simple preparation, in future endeavors.

Colorimetric detection of acidic pesticides in water

A water-stable, porphyrin-based metal-organic framework (MOF) produces a distinct colour change in response to acids' pK_a and concentrations. This colour change is associated with the protonation of the N-atoms within the porphyrin ligand present in the MOF structure. As a proof-of-concept, we demonstrate the use of this MOF for detecting traces of different acidic pesticides present in water samples spontaneously.

Fluorescence response mechanism of green synthetic carboxymethyl chitosan-Eu3+ aerogel to acidic gases

Industrial waste acidic gases are huge hazards to the environment and human health, so a material that can detect and remove them is needed. In this paper, CM chitosan-Eu³⁺ fluorescence aerogel was prepared via a green method by combining the carboxymethyl chitosan biomass polymer with Eu³⁺ ions, the structure and properties of this aerogel were characterized by SEM, TG, and stress-strain curves. The coordination of Eu³⁺ ions and carboxymethyl chitosan was analyzed with XPS and the difference in luminescence intensity of aerogel prepared at different pH values was analyzed. The monitoring of the aerogels revealed different responses to different acidic gases, and the fluorescence intensity of the aerogel showed a linear decrease with the adsorbed hydrogen chloride gas (HCl), while acetic acid gas (HAc) enhanced fluorescence. The adsorption system of the CM chitosan-Eu³⁺ aerogel was simulated using pseudo-second-order kinetics, which showed that the maximum adsorption capacity of HCl is 9.16 mmol/g. The different response mechanisms of HCl and HAc gas were analyzed with FT-IR, fluorescence lifetime imaging and Judd-Ofelt theory. This fluorescence aerogel was found to have potential applications in ensuring industrial production safety.

Sodium citrate doped polypyrrole/PS glass capillary tube sensor for ultra-small volume HCl gas detection

A sodium citrate (SC) doped polypyrrole (PPy)/PS capillary sensor was prepared for ultra-small volume HCl gas detection. A PS film was formed in advance on the inner wall of a silica glass capillary tube, which enabled us to prepare a high-qualified PPy sensitive film inside the tube. The crystallinity, morphology, microstructure and carrier transport properties of the PPy film were characterized by XRD, SEM, FTIR and Hall effect system, respectively. The results indicated that the as-prepared tube sensor sample was able to detect 0.2 mL 30 ppm HCl gas while the plane-shaped PPy/PS sensor failed to probe. The improvement of sensing properties was attributed to the trend of crystallinity, pore (or gap) morphology and the long-narrow gas cell. The tube-like gas cell and the featured PPy/PS film of the tube sample contribute to sensing the small volume of HCl gas, which may be applied in breath analysis for potential nonintrusive disease diagnosis.

Electrospinning of Polystyrene/Polyhydroxybutyrate Nanofibers Doped with Porphyrin and Graphene for Chemiresistor Gas Sensors

Structural and functional properties of polymer composites based on carbon nanomaterials are so attractive that they have become a big challenge in chemical sensors investigation. In the present study, a thin nanofibrous layer, comprising two insulating polymers (polystyrene (PS) and polyhydroxibutyrate (PHB)), a known percentage of nanofillers of mesoporous graphitized carbon (MGC) and a free-base tetraphenylporphyrin, was deposited onto an Interdigitated Electrode (IDE) by electrospinning technology. The potentials of the working temperature to drive both the sensitivity and the selectivity of the chemical sensor were studied and described. The effects of the porphyrin combination with the composite graphene⁻polymer system appeared evident when nanofibrous layers, with and without porphyrin, were compared for their morphology and electrical and sensing parameters. Porphyrin fibers appeared smoother and thinner and were more resistive at lower temperature, but became much more conductive when temperature increased to 60⁻70 °C. Both adsorption and diffusion of chemicals seemed ruled by porphyrin according its combination inside the composite fiber, since the response rates dramatically increased (toluene and acetic acid). Finally, the opposite effect of the working temperature on the sensitivity of the porphyrin-doped fibers (i.e., increasing) and the porphyrin-free fibers (i.e., decreasing) seemed further confirmation of the key role of such a macromolecule in the VOC (volatile organic compound) adsorption.

Electrospin-coating of nitrocellulose membrane enhances sensitivity in nucleic acid-based lateral flow assay

Point-of-care biosensors are important tools developed to aid medical diagnosis and testing, food safety and environmental monitoring. Paper-based biosensors, especially nucleic acid-based lateral flow assays (LFA), are affordable, simple to produce and easy to use in remote settings. However, the sensitivity of such assays to infectious diseases has always been a restrictive challenge. Here, we have successfully electrospun polycaprolactone (PCL) on nitrocellulose (NC) membrane to form a hydrophobic coating to reduce the flow rate and increase the interaction rate between the targets and gold nanoparticles-detecting probes conjugates, resulting in the binding of more complexes to the capture probes. With this approach, the sensitivity of the PCL electrospin-coated test strip has been increased by approximately ten-fold as compared to the unmodified test strip. As a proof of concept, this approach holds great potential for sensitive detection of targets at point-of-care testing.

Continuous detection of HCl and NH3 gases with a high-performance fluorescent polymer sensor

A novel fluorescent triazine-based covalent organic polymer (COP-1) sensor for HCl and NH₃ gases has been designed and synthesized.