Achieving Room-Temperature ppb-Level H2S Detection in a Au-SnO2 Sensor with Low Voltage Enhancement Effect

Although semiconductor metal oxide-based sensors are promising for gas sensing, low-power and room temperature operation (24 ± 1 °C) remains desirable for practical applications particularly considering the request of energy saving or net zero emission. In this study, we demonstrate a Au/SnO2-based ultrasensitive H2S gas sensor with a limit of detection (LOD) of 2 ppb, operating at very low voltages (0.05 to 0.5 V) at room temperature. The Au/SnO2-based sensor showed approximately 7 times higher response (the ratio of change in the current to initial current) of ∼270% and 4 times faster recovery (126 s) compared to the pure SnO2-based sensor when exposed to 500 ppb H2S gas concentration at 0.5 V operating voltage at relative humidity (RH) 17.5 ± 2.5%. The enhancement can be attributed to the catalytic characteristics of AuNPs, increasing the number of adsorbed oxygen species on sensing material surfaces. Additionally, AuNPs aid in forming flower-petal-like Au/SnO2 nanostructures, offering a larger surface area and more active sites for H2S sensing. Moreover, at low voltage (<1 V), the localized dipoles at the Au/SnO2 interface may further enhance the absorption of polar oxygen molecules and hence promote the reaction between H2S and oxygen species. This low-power, ultrasensitive H2S sensor outperforms high-powered alternatives, making it ideal for environmental, food safety, and healthcare applications.

Alkaline protease functionalized hydrothermal synthesis of novel gold nanoparticles (ALPs-AuNPs): A new entry in photocatalytic and biological applications

Researchers are consistently investigating novel and distinctive methods and materials that are compatible for human life and environmental conditions This study aimed to synthesize gold nanoparticles (ALPs-AuNPs) using for the first time an alkaline protease (ALPs) derived from Phalaris minor seed extract. A series of physicochemical techniques were used to inquire the formation, size, shape and crystalline nature of ALPs-AuNPs. The nanoparticles' ability to degrade methylene blue (MB) through photocatalysis under visible light irradiation was assessed. The findings demonstrated that ALPs-AuNPs exhibited remarkable efficacy by destroying 100 % of MB within a mere 30-minute irradiation period. In addition, the ALPs-AuNPs demonstrated remarkable effectiveness in inhibiting the growth of gram-positive (S. aureus) and gram-negative (E. coli) bacteria. The inhibition zones examined against the two bacterial strains were 23(±0.3) mm and 19(±0.4); 13(±0.3) mm and 11(±0.5) mm under light and dark conditions respectively. The ALPs-AuNPs exhibited significant antioxidant activity by effectively scavenging 88 % of stable and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals. As a result, the findings demonstrated that the environmentally friendly ALPs-AuNPs showed a strong potential for MB degradation and bacterial pathogen treatment.

Rapid and sensitive electrochemical detection of oxidized form of glutathione in whole blood samples using Bi-metallic nanocomposites

We report a facile one-pot synthesis of bimetallic nickel-gold (Ni-Au) nanocomposite for ultra-sensitive and selective electrochemical detection of oxidized glutathione (GSSG) by electrochemical deposition on fluorine doped tin oxide (FTO) substrate. The electrodeposition of Ni-Au nanocomposite on FTO was confirmed by various characterization techniques such as field emission scanning electron microscopy (FE-SEM), X-ray diffractometer (XRD) and Fourier transform infra-red (FTIR) spectroscopy. The cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) was utilized for the electrochemical characterization of glutathione reductase (GR)/Ni-Au/FTO working electrode at each stage of modification. The GR enzyme immobilized on the Ni-Au/FTO working electrode via glutaraldehyde cross-linking exhibited excellent selectivity against GSSG in the presence of nicotinamide adenine dinucleotide phosphate (NADPH). The immobilized GR enzyme breaks down the GSSG to reduced glutathione (GSH) and converting NADPH to NADP+ whereby generating an electron for the electrochemical sensing of GSSG. The synergistic behavior of bimetals and good electro-catalytic property of the fabricated sensor provided a broad linear detection range from 1 fM to 1 μM with a limit of detection (LOD) of 6.8 fM, limit of quantification (LOQ) of 20.41 fM and sensitivity of 0.024 mA/μM/cm2. The interference with other molecules such as dopamine, glycine, ascorbic acid, uric acid and glucose was found to be negligible due to the better selectivity of GR enzyme towards GSSG. The shelf-life and response time of the fabricated electrode was found to be 30 days and 32 s, respectively. The real sample analysis of GSSG in whole blood samples showed average recovery percentage from 95 to 101% which matched well with the standard calibration plot of the fabricated sensor with relative standard deviation (RSD) below 10%.

Alveoli-Like Multifunctional Scaffolds for Optical and Electrochemical In Situ Monitoring of Cellular Responses from Type II Pneumocytes

While breathing, alveoli are exposed to external irritants, which contribute to the pathogenesis of lung disease. Therefore, in situ monitoring of alveolar responses to stimuli of toxicants under in vivo environments is important to understand lung disease. For this purpose, 3D cell cultures are recently employed for examining cellular responses of pulmonary systems exposed to irritants; however, most of them have used ex situ assays requiring cell lysis and fluorescent labeling. Here, an alveoli-like multifunctional scaffold is demonstrated for optical and electrochemical monitoring of cellular responses of pneumocytes. Porous foam with dimensions like the alveoli structure is used as a backbone for the scaffold, wherein electroactive metal-organic framework crystals, optically active gold nanoparticles, and biocompatible hyaluronic acid are integrated. The fabricated multifunctional scaffold allows for label-free detection and real-time monitoring of oxidative stress released in pneumocytes under toxic-conditions via redox-active amperometry and nanospectroscopy. Moreover, cellular behavior can be statistically classified based on fingerprint Raman signals collected from the cells on the scaffold. The developed scaffold is expected to serve as a promising platform to investigate cellular responses and disease pathogenesis, owing to its versatility in monitoring electrical and optical signals from cells in situ in the 3D microenvironments.

Ultrasensitive Gas Detection Based on Electrically Enhanced Nanoplasmonic Sensor with Graphene-Encased Gold Nanorod

Nanoplasmonic sensors are a widely known concept and have been studied with various applications. Among them, gas detection is engaging attention in many fields. However, the analysis performance of nanoplasmonic sensors based on refractive index confined to the metal nanostructure characteristics causes challenges in gas detection. In this study, we develop a graphene-encased gold nanorod (AuNR)-based nanoplasmonic sensor to detect cadaverine gas. The graphene-encased AuNR (Gr@AuNR) presents an ultrasensitive peak wavelength shift even with tiny molecules. In addition, the external potential transmitted through graphene induces an additional shift. A chemical receptor is immobilized on Gr@AuNR (CR@Gr@AuNR) for selectively capturing cadaverine. The CR@Gr@AuNR achieves ultrasensitive detection of cadaverine gas, and the detection limit is increased to 15.99 ppb by applying a voltage to graphene. Furthermore, the experimental results of measuring cadaverine generated from spoiled pork show the practicality of CR@Gr@AuNR. The strategy of external-boosted nanoplasmonics provides new insight into plasmonic sensing and applications.

Gold-Promoted Electrodeposition of Metal Sulfides on Silicon Nanowire Photocathodes To Enhance Solar-Driven Hydrogen Evolution

Constructing composite structures is the key to breaking the dilemma of slow reaction kinetics and easy oxidation on the surface of lightly doped p-type silicon nanowire (SiNW) array photocathodes. Electrodeposition is a convenient and fast technique to prepare composite photocathodes. However, the low conductivity of SiNWs limits the application of the electrodeposition technique in constructing composite structures. Herein, SiNWs were loaded with Au nanoparticles by chemical deposition to decrease the interfacial charge transfer resistance and increase active sites for the electrodeposition. Subsequently, co-catalysts CoS, MoS₂, and Ni₃S₂ with excellent hydrogen evolution activity were successfully composited by electrodeposition on the surface of SiNWs/Au. The obtained core-shell structures exhibited excellent photoelectrochemical hydrogen evolution activity, which was contributed by the plasma property of Au and the abundant hydrogen evolution active sites of the co-catalysts. This work provided a simple and efficient solution for the preparation of lightly doped SiNW-based composite structures by electrodeposition.

Glutaraldehyde fixation promotes palladium and gold nanoparticles formation in yeast and enhances their catalytic activity in 4-nitrophenol reduction

When observing biosynthesized metal nanoparticles in microorganisms, glutaraldehyde is commonly used as a fixative to prepare TEM ultra-thin sections. However, as a chemical reagent with aldehyde groups, its reduction potential on metal ions has yet to be studied elaborately. Herein, we explored the influences of glutaraldehyde on yeast-synthesized gold nanoparticles (AuNPs), palladium nanoparticles (PdNPs) and their catalytic performance. A modified method for ultra-thin section preparation without glutaraldehyde fixation was developed to exclude its influence on AuNPs/PdNPs observation. It was confirmed that glutaraldehyde could promote the biosynthesis of AuNPs and PdNPs extra- and intracellularly, without altering their crystal structure and chemical state. The adsorption and reduction of Au(III)/Pd(II) were attributed to the different components of the yeast cell. Specifically, the amines and carboxyl groups in proteins and polysaccharides were involved in adsorption, while the reducing sugars hydrolyzed from polysaccharides were responsible for Au(III)/Pd(II) reduction. After glutaraldehyde fixation, the catalytic activities of Au/Pd-loaded yeast in 4-nitrophenol reduction were enhanced as well. Therefore, the influence of chemical fixatives in biosynthesized metal nanoparticles should be taken into consideration in regard to SEM, TEM observation and catalytic performance.

Reductive Oligomerization of Nitroaniline Catalyzed by Fe3O4 Spheres Decorated with Group 11 Metal Nanoparticles

The present work demonstrates a simple and sustainable method for forming azo oligomers from low-value compounds such as nitroaniline. The reductive oligomerization of 4-nitroaniline was achieved via azo bonding using nanometric Fe₃O₄ spheres doped with metallic nanoparticles (Cu NPs, Ag NPs, and Au NPs), which were characterized by different analytical methods. The magnetic saturation (M _s) of the samples showed that they are magnetically recoverable from aqueous environments. The effective reduction of nitroaniline followed pseudo-first-order kinetics, reaching a maximum conversion of about 97%. Fe₃O₄-Au is the best catalyst, its a reaction rate (k _Fe3O4-Au = 0.416 mM L^-1 min^-1) is about 20 times higher than that of bare Fe₃O₄ (k _Fe3O4 = 0.018 mM L^-1 min^-1). The formation of the two main products was determined by high-performance liquid chromatography-mass spectrometry (HPLC-MS), evidencing the effective oligomerization of NA through N = N azo linkage. It is consistent with the total carbon balance and the structural analysis by density functional theory (DFT)-based total energy. The first product, a six-unit azo oligomer, was formed at the beginning of the reaction through a shorter, two-unit molecule. The nitroaniline reduction is controllable and thermodynamically viable, as shown in the computational studies.

Fabrication and Characteristics of a Conductive FeCo@Au Nanowire Alloy for Semiconductor Test Socket Connectors

The most promising approach for improving the electrical performance of connectors used in semiconductor test sockets involves increasing their electrical conductivity by incorporating one-dimensional (1D) conductive materials between zero-dimensional (0D) conductive materials. In this study, FeCo nanowires were synthesized by electroplating to prepare a material in which 1D materials could be magnetically aligned. Moreover, the nanowires were coated with highly conductive Au. The magnetization per unit mass of the synthesized FeCo and FeCo@Au nanowires was 167.2 and 13.9 emu/g, respectively. The electrical performance of rubber-based semiconductor connectors before and after the introduction of synthetic nanowires was compared, and it was found that the resistance decreased by 14%. The findings reported herein can be exploited to improve the conductivity of rubber-type semiconductor connectors, thereby facilitating the development of connectors using 0D and 1D materials.

MXene coupled graphitic carbon nitride nanosheets based plasmonic photocatalysts for removal of pharmaceutical pollutant

The continuous rise in the amount of industrial and pharmaceutical waste in water sources is an alarming concern. Effective strategies should be developed for the treatment of pharmaceutical industrial waste. Hence the alternative renewable source of energy, such as solar energy, should be utilized for a sustainable future. Herein, a series of Au plasmonic nanoparticle decorated ternary photocatalysts comprising graphitic carbon nitride and Ti₃C₂ MXene has been designed to degrade colourless pharmaceutical pollutants, cefixime under visible light irradiation. These photocatalysts were synthesized by varying the amount of Ti₃C₂ MXene, and their catalytic potential was explored. The optimized photocatalyst having 3 wt% Ti₃C₂ MXene achieved 64.69% removal of the pharmaceutical pollutant, cefixime within 105 min of exposure to visible light. The presence of the Au nanoparticles and MXene in the nanocomposite facilitates the excellent charge carrier separation and increased the number of active sites due to the formation of interfacial contact with graphitic carbon nitride nanosheets. Besides, the plasmonic effect of the Au nanoparticles improves the absorption of light causing enhanced photocatalytic performance of the nanocomposite. Based on the obtained results, a plausible mechanism has been formulated to understand the contribution of different components in photocatalytic activity. In addition, the optimized photocatalyst shows excellent activity and can be reused for up to three cycles without any significant loss in its photocatalytic performance. Overall, the current work provides deeper physical insight into the future development of MXene graphitic carbon nitride-based plasmonic ternary photocatalysts.

Sensitivity enhancement of magneto-optical Faraday effect immunoassay method based on biofunctionalized γ-Fe2O3@Au core-shell magneto-plasmonic nanoparticles for the blood detection of Alzheimer's disease

In this work, we conducted a proof-of-concept experiment based on biofunctionalized magneto-plasmonic nanoparticles (MPNs) and magneto-optical Faraday effect for in vitro Alzheimer's disease (AD) assay. The biofunctionalized γ-Fe₂O₃@Au MPNs of which the surfaces are modified with the antibody of Tau protein (anti-τ). As anti-τ reacts with Tau protein, biofunctionalized MPNs aggregate to form magnetic clusters which will hence induce the change of the reagent's Faraday rotation angle. The result showed that the γ-Fe₂O₃@Au core-shell MPNs can enhance the Faraday rotation with respect to the raw γ-Fe₂O₃ nanoparticles. Because of their magneto-optical enhancement effect, biofunctionalized γ-Fe₂O₃@Au MPNs effectively improve the detection sensitivity. The detection limit of Tau protein as low as 9 pg/mL (9 ppt) was achieved. Furthermore, the measurements of the clinical samples from AD patients agreed with the CDR evaluated by the neurologist. The results suggest that our method has the potential for disease assay applications.

Plant-Based Synthesis of Gold Nanoparticles and Theranostic Applications: A Review

Bionanotechnology is a branch of science that has revolutionized modern science and technology. Nanomaterials, especially noble metals, have attracted researchers due to their size and application in different branches of sciences that benefit humanity. Metal nanoparticles can be synthesized using green methods, which are good for the environment, economically viable, and facilitate synthesis. Due to their size and form, gold nanoparticles have become significant. Plant materials are of particular interest in the synthesis and manufacture of theranostic gold nanoparticles (NPs), which have been generated using various materials. On the other hand, chemically produced nanoparticles have several drawbacks in terms of cost, toxicity, and effectiveness. A plant-mediated integration of metallic nanoparticles has been developed in the field of nanotechnology to overcome the drawbacks of traditional synthesis, such as physical and synthetic strategies. Nanomaterials′ tunable features make them sophisticated tools in the biomedical platform, especially for developing new diagnostics and therapeutics for malignancy, neurodegenerative, and other chronic disorders. Therefore, this review outlines the theranostic approach, the different plant materials utilized in theranostic applications, and future directions based on current breakthroughs in these fields.