A three-dimensional hydroxyapatite/polyacrylonitrile composite scaffold designed for bone tissue engineering

3D Melt-Extrusion Printing of Medium Chain Length Polyhydroxyalkanoates and Their Application as Antibiotic-Free Antibacterial Scaffolds for Bone Regeneration

In this work, we investigated, for the first time, the possibility of developing scaffolds for bone tissue engineering through three-dimensional (3D) melt-extrusion printing of medium chain length polyhydroxyalkanoate (mcl-PHA) (i.e., poly(3-hydroxyoctanoate-co-hydroxydecanoate-co-hydroxydodecanoate), P(3HO-co-3HD-co-3HDD)). The process parameters were successfully optimized to produce well-defined and reproducible 3D P(3HO-co-3HD-co-3HDD) scaffolds, showing high cell viability (100%) toward both undifferentiated and differentiated MC3T3-E1 cells. To introduce antibacterial features in the developed scaffolds, two strategies were investigated. For the first strategy, P(3HO-co-3HD-co-3HDD) was combined with PHAs containing thioester groups in their side chains (i.e., PHACOS), inherently antibacterial PHAs. The 3D blend scaffolds were able to induce a 70% reduction of Staphylococcus aureus 6538P cells by direct contact testing, confirming their antibacterial properties. Additionally, the scaffolds were able to support the growth of MC3T3-E1 cells, showing the potential for bone regeneration. For the second strategy, composite materials were produced by the combination of P(3HO-co-3HD-co-HDD) with a novel antibacterial hydroxyapatite doped with selenium and strontium ions (Se-Sr-HA). The composite material with 10 wt % Se-Sr-HA as a filler showed high antibacterial activity against both Gram-positive (S. aureus 6538P) and Gram-negative bacteria (Escherichia coli 8739), through a dual mechanism: by direct contact (inducing 80% reduction of both bacterial strains) and through the release of active ions (leading to a 54% bacterial cell count reduction for S. aureus 6538P and 30% for E. coli 8739 after 24 h). Moreover, the composite scaffolds showed high viability of MC3T3-E1 cells through both indirect and direct testing, showing promising results for their application in bone tissue engineering.

Nerve Regeneration Through Differentiation of Endometrial-Derived Mesenchymal Stem Cells into Nerve-Like Cells Using Polyacrylonitrile/Chitosan Conduit and Berberine in a Rat Sciatic Nerve Injury Model

Nervous injuries are common in humans. One of the most advanced treatment methods is neural tissue engineering. This research aims to utilize nerve-like cells (NLCs) derived from endometrial mesenchymal stem cells (EnMSCs) on a polyacrylonitrile/chitosan (PAN/CS) scaffold, along with berberine, for the reconstruction of a rat sciatic nerve injury model. In this experimental study, EnMSCs were obtained through enzymatic digestion and identified using flow cytometry and their differentiation into adipocyte and osteoblast. PAN nanofiber scaffolds were produced through electrospinning, and EnMSCs were neurally differentiated on these scaffolds for grafting into an animal model. The expression of Nestin, Map-2, Tuj-1, and NF genes in NLCs was confirmed through RT-PCR and immunocytochemistry. Twenty-five adult male rats were used in this study, divided into 5 groups: (1) Scaffold/Cells/Berberine, (2) Scaffold/Cells, (3) Scaffold, (4) Berberine, and (5) Control. The animals were maintained for 8 weeks, and their sciatic nerve function (SFI) was assessed. Additionally, histological examinations were performed using hematoxylin/eosin, luxol fast blue staining, and immunohistochemistry. According to the results, extraction, identification, and differentiation of EnMSCs and fabrication of PAN conduit and its transplantation were successfully performed. The best behavioral performance and histology were observed in the Scaffold/Cells/Berberine group. The SFI test results were -24.08 for the Scaffold/Cells/Berberine group and -39.27 for the control group. The nerve diameter in these two groups was 591 µm and 80 µm, respectively, and the percentage of new nerve formation was 18.5% in the Scaffold/Cells/Berberine group and 0.2% in the control group. The immunohistochemistry results demonstrated that the intensity of the green color was higher in the groups with cells compared to the groups without cells. Furthermore, in the luxol staining results, all groups showed a significant improvement compared to the control group. In the Scaffold/Cells/Berberine group, fibers, and axons appeared denser, more organized, and displayed a higher intensity of blue staining. According to the results of this study, EnMSCs demonstrated efficient differentiation into NLCs. With the assistance of PAN/CS scaffolds and simultaneous administration of berberine, EnMSCs have the potential for nerve regeneration and recovery from sciatic nerve injury in the rat animal model.

Facile fabrication of linezolid/strontium coated hydroxyapatite/graphene oxide nanocomposite for osteoporotic bone defect

Hydroxyapatite (HAp) coatings currently have limited therapeutic applications because they lack anti-infection, osteoinductivity, and poor mechanical characteristics. On the titanium substrate, electrochemical deposition (ECD) was used to construct the strontium (Sr)-featuring hydroxyapatite (HAp)/graphene oxides (GO)/linezolid (LZ) nanomaterial coated with antibacterial and drug delivery properties. The newly fabricated nanomaterials were confirmed by X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) analysis and morphological features were examined by scanning electron microscope (SEM) analysis. The results reveal multiple nucleation sites for SrHAp/GO/LZ composite coatings due to oxygen-comprising moieties on the 2D surface of GO. It was shown to be favorable for osteoblast proliferation and differentiation. The elastic modulus and hardness of LZ nanocomposite with SrHAp/GO/LZ coatings were increased by 67 % and 121 %, respectively. An initial 5 h burst of LZ release from the SrHAp/GO/LZ coating was followed by 14 h of gradual release, owing to LZ's physical and chemical adsorption. The SrHAp/GO/LZ coating effectively inhibited both S. epidermidis and S. aureus, and the inhibition lasted for three days, as demonstrated by the inhibition zone and colony count assays. When MG-63 cells are coated with SrHAp/GO/LZ composite coating, their adhesion, proliferation, and differentiation greatly improve when coated with pure titanium. A novel surface engineering nanomaterial for treating and preventing osteoporotic bone defects, SrHAp/GO/LZ, was shown to have high mechanical characteristics, superior antibacterial abilities, and osteoinductivity.

Calcium Orthophosphate (CaPO4) Containing Composites for Biomedical Applications: Formulations, Properties, and Applications

The goal of this review is to present a wide range of hybrid formulations and composites containing calcium orthophosphates (abbreviated as CaPO4) that are suitable for use in biomedical applications and currently on the market. The bioactive, biocompatible, and osteoconductive properties of various CaPO4-based formulations make them valuable in the rapidly developing field of biomedical research, both in vitro and in vivo. Due to the brittleness of CaPO4, it is essential to combine the desired osteologic properties of ceramic CaPO4 with those of other compounds to create novel, multifunctional bone graft biomaterials. Consequently, this analysis offers a thorough overview of the hybrid formulations and CaPO4-based composites that are currently known. To do this, a comprehensive search of the literature on the subject was carried out in all significant databases to extract pertinent papers. There have been many formulations found with different material compositions, production methods, structural and bioactive features, and in vitro and in vivo properties. When these formulations contain additional biofunctional ingredients, such as drugs, proteins, enzymes, or antibacterial agents, they offer improved biomedical applications. Moreover, a lot of these formulations allow cell loading and promote the development of smart formulations based on CaPO4. This evaluation also discusses basic problems and scientific difficulties that call for more investigation and advancements. It also indicates perspectives for the future.

Production of Blended Poly(acrylonitrile): Poly(ethylenedioxythiophene):Poly(styrene sulfonate) Electrospun Fibers for Neural Applications

This study describes, for the first time, the successful incorporation of poly(ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) in Poly(acrylonitrile) (PAN) fibers. While electroconductive PEDOT:PSS is extremely challenging to electrospun into fibers. Therefore, PAN, a polymer easy to electrospun, was chosen as a carrier due to its biocompatibility and tunable chemical stability when cross-linked, particularly using strong acids. PAN:PEDOT:PSS blends, prepared from PEDOT:PSS Clevios PH1000, were electrospun into fibers (PH1000) with a diameter of 515 ± 120 nm, which after being thermally annealed (PH1000 24H) and treated with heated sulfuric acid (PH1000 H₂SO₄), resulted in fibers with diameters of 437 ± 109 and 940 ± 210 nm, respectively. The fibers obtained over the stepwise process were characterized through infra-red/Raman spectroscopy and cyclic voltammetry. The final fiber meshes showed enhanced electroconductivity (3.2 × 10^-3 S cm^-1, four-points-assay). Fiber meshes biocompatibility was evaluated using fibroblasts and neural stem cells (NSCs) following, respectively, the ISO10993 guidelines and standard adhesion/proliferation assay. NSCs cultured on PH1000 H₂SO₄ fibers presented normal morphology and high proliferation rates (0.37 day^-1 vs. 0.16 day^-1 for culture plate), indicating high biocompatibility for NSCs. Still, the low initial NSC adhesion of 7% calls for improving seeding methodologies. PAN:PEDOT:PSS fibers, here successful produced for the first time, have potential applications in neural tissue engineering and soft electronics.

Resistive coupled microwave sintering of hydroxyapatite/titania nano-biocomposite and tailoring its mechanical properties

Tailoring the mechanical properties of bioceramics plays a crucial role in the fabrication of hard tissue substitutes. In this work, phase pure nanostructured hydroxyapatite and titania were synthesized using a single-step combustion technique. To study the influence of titania in the mechanical properties of hydroxyapatite, hydroxyapatite/titania (TiO₂-0%, 10%, 20%, and 30%) nanocomposites were prepared. The sample containing 20% titania showed maximum sinterability and was analysed in detail. The samples were sintered by a novel resistive coupled microwave sintering to 98.9% of the theoretical density at 1020 °C for a soaking duration of 20 min. A substantial reduction in sintering temperature of ∼165 °C and a significantly low soaking duration were observed in the samples sintered using the new technique and it yielded pellets with reduced grain size compared to the samples sintered via conventional resistive heating. They have shown better microhardness of 7.7 GPa, enhanced compressive strength of 194.9 MPa, and improved elastic modulus of 136.2 GPa without compromising the cell viability, cell adhesion, differentiation, proliferation, and biomineralization. The results indicate that by varying the titania content in hydroxyapatite and by adopting a suitable low-temperature sintering strategy like resistive coupled microwave sintering, one can tailor the mechanical properties of bone implants.

Resistive coupled microwave sintering - A promising technique to fabricate bioceramics with improved properties

Enhancing the mechanical properties of biocompatible hydroxyapatite is one of the major challenges in the fabrication of bone implants. In this work, phase pure samples of nano-hydroxyapatite with an average crystallite size of 22 nm, were synthesized by a modified single-step combustion technique. The samples were sintered by a novel resistive coupled microwave sintering technique to 98.4% of theoretical density at 1030 °C for a soaking duration of 20 min. The new method yielded pellets with an average grain size of 0.12 ± 0.01 μm, that showed an improved Vickers microhardness of 7.1 GPa, enhanced young's modulus of 110.51 ± 1.8 GPa, and better compressive strength of 172 ± 10 MPa compared to those pellets sintered via conventional resistive heating. The sintered samples showed better cell viability, cell adhesion, proliferation, differentiation, and osteogenic potential. The enhanced mechanical properties achieved by resistive coupled microwave sintering without compromising the biological properties is a remarkable result that can effectively be used in the fabrication of high-quality bone substitutes.

Synthesis of Spinel-Hydroxyapatite Composite Utilizing Bovine Bone and Beverage Can

Spinel-based hydroxyapatite composite (SHC) has been synthesized utilizing bovine bones as the source of the hydroxyapatite (HAp) and beverage cans as the aluminum (Al) source. The bovine bones were defatted and calcined in the air atmosphere to transform them into hydroxyapatite. The beverage cans were cut and milled to obtain fine Al powder and then sieved to obtain three different particle mesh size fractions: +100#, −140# + 170#, and −170#, or Al particle size of >150, 90–150, and <90 µm, respectively. The SHC was synthesized using the self-propagating intermediate-temperature synthesis (SIS) method at 900 °C for 2 h with (HAp:Al:Mg) ratio of (87:10:3 wt.%) and various compaction pressure of 100, 171, and 200 MPa. It was found that the mechanical properties of the SHC are influenced by the Al particle size and the compaction pressure. Smaller particle size produces the tendency of increasing the hardness and reducing the porosity of the composite. Meanwhile, increasing compaction pressure produces a reduction of the SHC porosity. The increase in the hardness is also observed by increasing the compaction pressure except for the smallest Al particle size (<90 µm), where the hardness instead becomes smaller.

Electrospun polyacrylonitrile/hydroxyapatite composite nanofibrous membranes for the removal of lead ions from aqueous solutions

A novel Polyacrylonitrile/Hydroxyapatite (PAN/HAP) composite nanofibrous membranes were successfully prepared via the electrospinning approach. The scanning electron microscope, Fourier transforms infrared, X-ray diffraction were selected to serve as characterization techniques...

Fibers by Electrospinning and Their Emerging Applications in Bone Tissue Engineering

Bone tissue engineering (BTE) is an optimized approach for bone regeneration to overcome the disadvantages of lacking donors. Biocompatibility, biodegradability, simulation of extracellular matrix (ECM), and excellent mechanical properties are essential characteristics of BTE scaffold, sometimes including drug loading capacity. Electrospinning is a simple technique to prepare fibrous scaffolds because of its efficiency, adaptability, and flexible preparation of electrospinning solution. Recent studies about electrospinning in BTE are summarized in this review. First, we summarized various types of polymers used in electrospinning and methods of electrospinning in recent work. Then, we divided them into three parts according to their main role in BTE, (1) ECM simulation, (2) mechanical support, and (3) drug delivery system.

Micro-Computed Tomography Analysis on Administration of Mesenchymal Stem Cells - Bovine Teeth Scaffold Composites for Alveolar Bone Tissue Engineering

The tissue engineering approach for periodontal tissue regeneration using a combination of stem cells and scaffold has been vastly developed. Mesenchymal Stem Cells (MSCs) seeded with Bovine Teeth Scaffold (BTSc) can repair alveolar bone damage in periodontitis cases. The alveolar bone regeneration process was analyzed by micro-computed tomography (µ-CT) to observe the structure of bone growth and to visualize the scaffold in 3-Dimensional (3D). The purpose of this study is to analyze alveolar bone regeneration by µ-CT following the combination of MSCs and bovine teeth scaffold (MSCs-BTSc) implantation in the Wistar rat periodontitis model. Methods. MSCs were cultured from adipose-derived mesenchymal stem cells of rats. BTSc was taken from bovine teeth and freeze-dried with a particle size of 150-355 µm. MSCs were seeded on BTSc for 24 hours and transplanted in a rat model of periodontitis. Thirty-five Wistar rats were made as periodontitis models with LPS induction from P. gingivalis injected to the buccal section of interproximal gingiva between the first and the second mandibular right-molar teeth for six weeks. There were seven groups (control group, BTSc group on day 7, BTSc group on day 14, BTSc group on day 28, MSCs-BTSc group on day 7, MSCs-BTSc group on day 14, MSCs-BTSc group on day 28). The mandibular alveolar bone was analyzed and visualized in 3D with µ-CT to observe any new bone growth. Statistical Analysis. Group data were subjected to the Kruskal Wallis test followed by the Mann-Whitney (p <0.05). The µ-CT qualitative analysis shows a fibrous structure, which indicates the existence of new bone regeneration. Quantitative analysis of the periodontitis model showed a significant difference between the control model and the model with the alveolar bone resorption (p <0.05). The bone volume and density measurements revealed that the MSCs-BTSc group on day 28 formed new bone compared to other groups (p <0.05). Administration of MSCs-BTSc combination has the potential to form new alveolar bone.

Electrospun Nanofibrous Membranes for Tissue Engineering and Cell Growth

In biotechnology, the field of cell cultivation is highly relevant. Cultivated cells can be used, for example, for the development of biopharmaceuticals and in tissue engineering. Commonly, mammalian cells are grown in bioreactors, T-flasks, well plates, etc., without a specific substrate. Nanofibrous mats, however, have been reported to promote cell growth, adhesion, and proliferation. Here, we give an overview of the different attempts at cultivating mammalian cells on electrospun nanofiber mats for biotechnological and biomedical purposes. Starting with a brief overview of the different electrospinning methods, resulting in random or defined fiber orientations in the nanofiber mats, we describe the typical materials used in cell growth applications in biotechnology and tissue engineering. The influence of using different surface morphologies and polymers or polymer blends on the possible application of such nanofiber mats for tissue engineering and other biotechnological applications is discussed. Polymer blends, in particular, can often be used to reach the required combination of mechanical and biological properties, making such nanofiber mats highly suitable for tissue engineering and other biotechnological or biomedical cell growth applications.

Fabrication of Highly Oriented Cylindrical Polyacrylonitrile, Poly(lactide-co-glycolide), Polycaprolactone and Poly(vinyl acetate) Nanofibers for Vascular Graft Applications

Small-diameter vascular grafts fabricated from synthetic polymers have found limited applications so far in vascular surgeries, owing to their poor mechanical properties. In this study, cylindrical nanofibrous structures of highly oriented nanofibers made from polyacrylonitrile, poly (lactide-co-glycolide) (PLGA), polycaprolactone (PCL) and poly(vinyl acetate) (PVAc) were investigated. Cylindrical collectors with alternate conductive and non-conductive segments were used to obtain highly oriented nanofibrous structures at the same time with better mechanical properties. The surface morphology (orientation), mechanical properties and suture retention of the nanofibrous structures were characterized using SEM, mechanical tester and universal testing machine, respectively. The PLGA nanofibrous cylindrical structure exhibited excellent properties (tensile strength of 9.1 ± 0.6 MPa, suture retention strength of 27N and burst pressure of 350 ± 50 mmHg) when compared to other polymers. Moreover, the PLGA grafts showed good porosity and elongation values, that could be potentially used for vascular graft applications. The combination of PLGA nanofibers with extracellular vesicles (EVs) will be explored as a potential vascular graft in future.

Fabrication of Graphene Nanoplatelet-Incorporated Porous Hydroxyapatite Composites: Improved Mechanical and in Vivo Imaging Performances for Emerging Biomedical Applications

Three-dimensional nanocomposites exhibit unexpected mechanical and biological properties that are produced from two-dimensional graphene nanoplatelets and oxide materials. In the present study, various composites of microwave-synthesized nanohydroxyapatite (nHAp) and graphene nanoparticles (GNPs), (100 - x)HAp-xGNPs (x = 0, 0.1, 0.2, 0.3, and 0.5 wt %), were successfully synthesized using a scalable bottom-up approach, that is, a solid-state reaction method. The structural, morphological and mechanical properties were studied using various characterization techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and universal testing machine (UTM). XRD studies revealed that the prepared composites have high-order crystallinity. Addition of GNPs into nHAp significantly improved the mechanical properties. Three-dimensional nanocomposite 99.5HAp-0.5GNPs exhibited exceptionally high mechanical properties, for example, a fracture toughness of ∼116 MJ/m³, Young's modulus of ∼98 GPa, and compressive strength of 96.04 MPa, which were noticed to be much greater than in the pure nHAp. The MTT assay and cell imaging behaviors were carried out on the gut tissues of Drosophila third instars larvae and on primary rat osteoblast cells for the sample 99.5HAp-0.5GNPs that have achieved the highest mechanical properties. The treatment with lower concentrations of 10 μg/mL on the gut tissues of Drosophila and 1 and 5 μg/mL of this composite sample showed favorable cell viability. Therefore, owing to the excellent porous nature, interconnected surface morphology, and mechanical and biological properties, the prepared composite sample 99.5HAp-0.5GNPs stood as a promising biomaterial for bone implant applications.

Fabrication of Graphene Nanoplatelet-Incorporated Porous Hydroxyapatite Composites: Improved Mechanical and in Vivo Imaging Performances for Emerging Biomedical Applications

Three-dimensional nanocomposites exhibit unexpected mechanical and biological properties that are produced from two-dimensional graphene nanoplatelets and oxide materials. In the present study, various composites of microwave-synthesized nanohydroxyapatite (nHAp) and graphene nanoparticles (GNPs), (100 - x)HAp-xGNPs (x = 0, 0.1, 0.2, 0.3, and 0.5 wt %), were successfully synthesized using a scalable bottom-up approach, that is, a solid-state reaction method. The structural, morphological and mechanical properties were studied using various characterization techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and universal testing machine (UTM). XRD studies revealed that the prepared composites have high-order crystallinity. Addition of GNPs into nHAp significantly improved the mechanical properties. Three-dimensional nanocomposite 99.5HAp-0.5GNPs exhibited exceptionally high mechanical properties, for example, a fracture toughness of ∼116 MJ/m3, Young's modulus of ∼98 GPa, and compressive strength of 96.04 MPa, which were noticed to be much greater than in the pure nHAp. The MTT assay and cell imaging behaviors were carried out on the gut tissues of Drosophila third instars larvae and on primary rat osteoblast cells for the sample 99.5HAp-0.5GNPs that have achieved the highest mechanical properties. The treatment with lower concentrations of 10 μg/mL on the gut tissues of Drosophila and 1 and 5 μg/mL of this composite sample showed favorable cell viability. Therefore, owing to the excellent porous nature, interconnected surface morphology, and mechanical and biological properties, the prepared composite sample 99.5HAp-0.5GNPs stood as a promising biomaterial for bone implant applications.

Novel Hierarchical Nitrogen-Doped Multiwalled Carbon Nanotubes/Cellulose/Nanohydroxyapatite Nanocomposite As an Osteoinductive Scaffold for Enhancing Bone Regeneration

Nanomaterials based on hybrid scaffolds have shown a high potential to promote osteointegration and bone regeneration. In this study, a novel nanocomposite scaffold was synthesized via a cross-linking/hydrothermal/freeze-drying method, resulting in layer-by-layer structures with functional and structural properties mimicking the natural bone. The hierarchical structures of the scaffold were reinforced with nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs), cellulose, and nanohydroxyapatite. The N-MWCNT/Cel/nHA scaffolds were characterized and evaluated in terms of structure, morphology, biocompatibility, cellular responses, and bone repair efficiency in vivo. The resulting scaffolds showed that incorporation of 1 wt % N-MWCNTs into the hybrid scaffold with micropores (∼5 μm) significantly improved its mechanical properties, although the surface morphology of the scaffold tended to be rough and porous. Importantly, the resulting scaffolds supported in vitro cellular attachment, proliferation, viability, and mineralization of bone mesenchymal stem cells (BMSCs). On the other hand, incorporation of N-MWCNTs into the scaffold induced preferential differentiation of BMSCs to osteogenic lineage accompanied by increased alkaline phosphatase activity and expression of key osteogenic genes. Furthermore, 12 weeks after implantation, the 1%N-MWCNT/Cel/nHA porous scaffolds successfully cicatrized a distal femoral condyle critical size defect in rabbit without obvious inflammatory responses, as indicated by the results of the Micro-CT and histological analyses. In vitro and in vivo experiments confirmed that the scaffolds not only improved the interface bonding with bone tissue but also accelerated the new bone formation and regeneration by up-regulating signaling molecules that are involved in cell proliferation and differentiation. These results indicated that the novel N-MWCNT/Cel/nHA scaffold is an efficient platform for osteogenesis research and bone regeneration medicine.

Incorporation of Stromal Cell-Derived Factor-1α in Three-Dimensional Hydroxyapatite/Polyacrylonitrile Composite Scaffolds for Bone Regeneration

Bone regeneration strategies rely on biomaterial constructs with stem cells or growth factors. By comparison, cell homing strategies employ chemokines to recruit the host endogenous stem or progenitor cells to the defect site to support endogenous healing. In the present study, we used a novel fluffy hydroxyapatite/polyacrylonitrile (HA/PAN) composite scaffold to provide a better three-dimensional cell culture microenvironment. These HA/PAN composite scaffolds loaded with stromal cell-derived factor-1α (SDF-1α) provided a diffusion-controlled SDF-1α release profile and endowed the scaffolds with cell homing capabilities. Furthermore, the scaffolds significantly stimulated bone marrow stromal cell (BMSC) recruitment, facilitated BMSC osteogenic differentiation, and promoted ectopic bone formation. Our results suggest that a HA/PAN composite scaffold loaded with SDF-1α offers a clinically beneficial bone repair strategy.