Advances in Nanomedicine and Biomaterials for Endometrial Regeneration: A Comprehensive Review

The endometrium is an extremely important component of the uterus and is crucial for individual health and human reproduction. However, traditional methods still struggle to ideally repair the structure and function of damaged endometrium and restore fertility. Therefore, seeking and developing innovative technologies and materials has the potential to repair and regenerate damaged or diseased endometrium. The emergence and functionalization of various nanomedicine and biomaterials, as well as the proposal and development of regenerative medicine and tissue engineering techniques, have brought great hope for solving these problems. In this review, we will summarize various nanomedicine, biomaterials, and innovative technologies that contribute to endometrial regeneration, including nanoscale exosomes, nanomaterials, stem cell-based materials, naturally sourced biomaterials, chemically synthesized biomaterials, approaches and methods for functionalizing biomaterials, as well as the application of revolutionary new technologies such as organoids, organ-on-chips, artificial intelligence, etc. The diverse design and modification of new biomaterials endow them with new functionalities, such as microstructure or nanostructure, mechanical properties, biological functions, and cellular microenvironment regulation. It will provide new options for the regeneration of endometrium, bring new hope for the reconstruction and recovery of patients' reproductive abilities.

Multifunctional Nanofibrous Hollow Microspheres for Enhanced Periodontal Bone Regeneration

Destructive periodontitis destroys alveolar bone and eventually leads to tooth loss. While guided bone regeneration, which is based on creating a physical barrier to hinder the infiltration of epithelial and connective tissues into defect sites, has been widely used for alveolar bone regeneration, its outcomes remain variable. In this work, a multifunctional nanofibrous hollow microsphere (NFHMS) is developed for enhanced alveolar bone regeneration. The NFHMS is first prepared via combining a double emulsification and a thermally induced phase separation process. Next, E7, a short peptide with high specific affinity to bone marrow-derived stem cells (BMSCs), is conjugated onto the surface of NFHMS. After that, bone forming peptide (BFP), a short peptide derived from bone morphology protein 7 is loaded in calcium phosphate (CaP) nanoparticles, which are further encapsulated in the hollow space of the NFHMS-E7 to form NFHMS-E7-CaP/BFP. The NFHMS-E7-CaP/BFP selectively promoted the adhesion of BMSCs and expelled the adhesion of fibroblasts and epithelial cells. In addition, the BFP is sustainedly released from the NFHMS-E7-CaP/BFP to enhance the osteogenesis of BMSCs. A rat challenging fenestration defect model showed that the NFHMS-E7-CaP/BFP significantly enhanced alveolar bone tissue regeneration. This work provides a novel bioengineering approach for guided bone regeneration.

E7-Conjugated Bio-Inspired Microspheres as a Biological Barrier for Guided Tissue Regeneration

Guided tissue regeneration (GTR), which is based on creating a physical barrier to prevent the downgrowth of epithelial and connective tissues into the defect site, has been widely used in clinical practice for periodontal regeneration for many years. However, its outcomes remain variable due to highly specific indications, the demand for proficient surgical skills, and frequent occurrence of complications. In this study, we developed a new GTR biomaterial that acts as a biological barrier for epithelial cells and fibroblasts while also serving as a scaffold for bone marrow-derived mesenchymal stem cells (BMSCs) and periodontal ligament stem cells (PDLSCs). This innovative GTR biomaterial is bioinspired injectable microspheres that are self-assembled from nanofibers, and their surfaces are conjugated with E7, a short peptide that selectively promotes BMSC and PDLSC adhesion but inhibits the attachment and spreading of epithelial cells and gingival fibroblasts. The selective affinity afforded by E7 on the surfaces of the nanofibrous microspheres facilitated the colonization of BMSCs in the periodontal defect, thereby substantially improving functional periodontal regeneration, as evidenced by enhanced new bone formation, reduced root exposure, and diminished attachment loss. The remarkable superiority of the bioinspired microspheres over conventional GTR materials in promoting periodontal regeneration underscores the potential of this innovative approach to enhance the efficacy of functional periodontal tissue regeneration.

Enhanced glypican-3-targeted identification of hepatocellular carcinoma with liver fibrosis by pre-degrading excess fibrotic collagen

Most hepatocellular carcinomas (HCCs) occur in cirrhotic livers, but unequivocal diagnosis of early HCC from the fibrotic microenvironment remains a formidable challenge with conventional imaging strategies, mainly because of the massive fibrotic collagen deposition leading to hepatic nodules formation and dysfunction of contrast agent metabolism. Here, we developed a "sweep-and-illuminate" imaging strategy, pre-degrade hepatic fibrotic collagen with collagenase I conjugated human serum albumin (HSA-C) and then targeting visualize HCC lesion with GPC3 targeting nanoparticles (TSI NPs, TJ2 peptide-superparamagnetic iron oxide-indocyanine green) via fluorescence imaging (FLI) and magnetic particle imaging (MPI). TSI NPs delineated a clear boundary of HCC and normal liver, and the tumor-to-background ratios (TBRs) detected by FLI and MPI were 5.43- and 1.34-fold higher than the non-targeted group, respectively. HSA-C could degrade 24.7% fibrotic collagen, followed by 27.2% reduction of nonspecific NPs retention in mice with liver fibrosis. In a pathological state in which HCC occurs in the fibrotic microenvironment, HSA-C-mediated pre-degradation of fibrotic collagen reduced background signal interference in fibrotic tissues and enhanced the intratumoral uptake of TSI NPs, resulting in the clear demarcation between HCC and liver fibrosis, and the TBR was increased 2.61-fold compared to the group without HSA-C pretreatment. We demonstrated the feasibility of combined pre-degradation of fibrotic collagen and application of a GPC3-targeted FLI/MPI contrast agent for early HCC identification, as well as its clinical value in the management of patients with advanced liver fibrosis. STATEMENT OF SIGNIFICANCE: Given that liver fibrosis hinders early detection and treatment options of hepatocellular carcinomas (HCCs), we report a "sweep-and-illuminate" imaging strategy to enhance the efficiency of HCC identification by modulating the irreversible liver fibrosis. We first "sweep" nonspecific interference of contrast agent by pre-degrading fibrotic collagen with human serum albumin-carried collagenase I (HSA-C); and then specifically "illuminate" HCC lesions with GPC3-targeted-SPIO-ICG nanoparticles (TSI NPs). HSA-C can degrade 24.7% fibrotic collagen, followed by 27.2% reduction of nonspecific NPs retention in mice with liver fibrosis. Furthermore, in HCC models coexisting with liver fibrosis, the combined application of HSA-C and TSI NPs can clarify the demarcation between HCC and liver fibrosis with a 2.61-fold increase in the tumor-to-background ratio. This study may expand the potential of combinatorial biomaterials for early HCC diagnosis.

Construction of artificial periosteum with methacrylamide gelatin hydrogel-wharton's jelly based on stem cell recruitment and its application in bone tissue engineering

The presence of periosteum can greatly affect the repair of a bone fracture. An artificial periosteum imitates the biological function of natural periosteum, which is capable of protecting and maintaining bone tissue structure and promoting bone repair. In our artificial periosteum, biocompatible methacrylate gelatin was used to provide the mechanical support of the membrane, E7 peptide added bioactivity, and Wharton's jelly provided the biological activity support of the membrane, resulting in a hydrogel membrane (G-E-W) for the chemotactic recruitment of bone marrow mesenchymal stem cells (BMSCs) and promoting cell proliferation and osteogenic differentiation. In an in vitro experiment, the G-E-W membrane recruited BMSCs and promoted cell proliferation and osteogenic differentiation. After 4 weeks and 8 weeks of implantation in a rat skull defect, the group implanted with a G-E-W membrane was superior to the blank control group and single-component membrane group in both quantity and quality of new bone. The artificial G-E-W membrane recruits BMSC chemotaxis and promotes cell proliferation and osteogenic differentiation, thereby effectively improving the repair efficiency of fractures and bone defects.

An Acellular Scaffold Facilitates Endometrial Regeneration and Fertility Restoration via Recruiting Endogenous Mesenchymal Stem Cells

Severe intrauterine adhesions (IUAs), characterized by inadequate endometrial repair and fibrosis, can lead to infertility. Stem cell-based therapies, which deliver mesenchymal stem cells (MSCs) to the wound site, hold a considerable promise for endometrium regeneration. However, some notable hurdles, such as stemness loss, immunogenicity, low retention and survival rate, limit their clinical application. Evidence shows a strategy of mobilizing endogenous MSCs recruitment can overcome the traditional limitations of exogenous stem cell-based therapies. Here, an acellular biomaterial named stromal derived factor-1 alpha (SDF-1α)/E7-modified collagen scaffold (CES) is explored. CES based on harnessing the innate regenerative potential of the body enables near-complete endometrium regeneration and fertility restoration both in a rat endometrium acute damage model and a rat IUA model. Mechanistically, the CES implantation promotes endogenous MSCs recruitment via a macrophage-coordinated strategy; then the homing MSCs exert the function of immunomodulation and altered local microenvironments toward regeneration. To conclude, CES, which can harness endogenous MSCs and overcome the traditional limitations of cell-based therapies, can serve as a clinically feasible and cell-free strategy with high therapeutic efficiency for IUA treatment.

Cell Response in Free-Packed Granular Systems

The study of the interactions of living adherent cells with mechanically stable (visco)elastic materials enables understanding and exploitation of physiological phenomena mediated by cell-extracellular communication. Insights into the interaction of cells and surrounding objects with different stability patterns upon cell contact might unveil biological responses to engineer innovative applications. Here, we hypothesize that the efficiency of cell attachment, spreading, and movement across a free-packed granular bed of microparticles depends on the microparticle diameter, raising the possibility of a necessary minimum traction force for the reinforcement of cell-particle bonds and long-term cell adhesion. The results suggest that microparticles with diameters of 14-20 μm are prone to cell-mediated mobility, holding the potential of inducing early cell detachment, while objects with diameters from 38 to 85 μm enable long-lasting cell adhesion and proliferation. An in silico hybrid particle-based model that addresses the time-dependent biological mechanisms of cell adhesion is proposed, providing inspiration for engineering platforms to address healthcare-related challenges.

Aqueous Processed Biopolymer Interfaces for Single-Cell Microarrays

Single-cell microarrays are emerging tools to unravel intrinsic diversity within complex cell populations, opening up new approaches for the in-depth understanding of highly relevant diseases. However, most of the current methods for their fabrication are based on cumbersome patterning approaches, employing organic solvents and/or expensive materials. Here, we demonstrate an unprecedented green-chemistry strategy to produce single-cell capture biochips onto glass surfaces by all-aqueous inkjet printing. At first, a chitosan film is easily inkjet printed and immobilized onto hydroxyl-rich glass surfaces by electrostatic immobilization. In turn, poly(ethylene glycol) diglycidyl ether is grafted on the chitosan film to expose reactive epoxy groups and induce antifouling properties. Subsequently, microscale collagen spots are printed onto the above surface to define the attachment area for single adherent human cancer cells harvesting with high yield. The reported inkjet printing approach enables one to modulate the collagen area available for cell attachment in order to control the number of captured cells per spot, from single-cells up to double- and multiple-cell arrays. Proof-of-principle of the approach includes pharmacological treatment of single-cells by the model drug doxorubicin. The herein presented strategy for single-cell array fabrication can constitute a first step toward an innovative and environmentally friendly generation of aqueous-based inkjet-printed cellular devices.

Defined Substrate by Aptamer Modification with the Balanced Properties of Selective Capture and Stemness Maintenance of Mesenchymal Stem Cells

The recruitment of endogenous mesenchymal stem cells (MSCs), as an alluring approach for in situ tissue regeneration, always accompanies with other types of cells. Therefore, it is of enormous value to bestow a substrate with the property of selective capture to MSCs. However, it was reported that when MSCs are cultured on a substrate with excessive affinity, their stemness diminished. Therefore, constructing a substrate with the balanced ability of selective capture and stemness maintenance becomes a big challenge. In this study, an Aptamer 19S (Apt19S)-modified substrate was fabricated by grafting Apt19S on a PEGylated glass substrate. The X-ray photoelectron spectroscopy results verified that the antifouling poly(ethylene glycol) (PEG) layer was created. Tracking by ellipsometry, the thicknesses of PEG layers were proved to increase with PEG concentration. The results of the quartz crystal microbalance also validated that the Apt19S densities could be modulated by the concentrations of the Apt19S solution. The results of the cell adhesion assay indicated that the modification of Apt19S caused a significant increase in the adhesion ratio and area of rBMSCs. Selective adhesion was confirmed by coculture of rBMSCs with macrophages and NIH3T3 cells, demonstrating that a higher proportion of rBMSCs adhered to the Apt19S-modified substrate. The results of specific capture were further confirmed by a flow model to simulate the body fluid flow. The comprehensive results of reverse transcription polymerase chain reaction, immunofluorescence staining, proliferation capacity, and differentiation assay showed that the stemness of rBMSCs was maintained better on a substrate with the appropriate Apt19S density. All of these results indicated that Apt19S modification is an effective strategy to endow a substrate with the specific capture ability of MSCs, and the balance between selective capture and stemness maintenance can be achieved by the precise regulation of the aptamer density.

Design and Applications of Cell-Selective Surfaces and Interfaces

Tissue regeneration involves versatile types of cells. The accumulation and disorganized behaviors of undesired cells impair the natural healing process, leading to uncontrolled immune response, restenosis, and/or fibrosis. Cell-selective surfaces and interfaces can have specific and positive effects on desired types of cells, allowing tissue regeneration with restored structures and functions. This review outlines the importance of surfaces and interfaces of biomaterials with cell-selective properties. The chemical and biological cues including peptides, antibodies, and other molecules, physical cues such as topography and elasticity, and physiological cues referring mainly to interactions between cells-cells and cell-chemokines or cytokines are effective modulators for achieving cell selectivity upon being applied into the design of biomaterials. Cell-selective biomaterials have also shown practical significance in tissue regeneration, in particular for endothelialization, nerve regeneration, capture of stem cells, and regeneration of tissues of multiple structures and functions.