Antimicrobial random peptide cocktails: a new approach to fight pathogenic bacteria

LC-MS/MS-based phospholipid profiling of plant-pathogenic bacteria with tailored separation of methyl-branched species

Plant-pathogenic bacteria are one of the major constraints on agricultural yield. In order to selectively treat these bacteria, it is essential to understand the molecular structure of their cell membrane. Previous studies have focused on analyzing hydrolyzed fatty acids (FA) due to the complexity of bacterial membrane lipids. These studies have highlighted the occurrence of branched-chain fatty acids (BCFA) alongside normal-chain fatty acids (NCFA) in many bacteria. As several FA are bound in the intact phospholipids of the bacterial membrane, the presence of isomeric FA complicates lipid analysis. Furthermore, commercially available reference standards do not fully cover potential lipid isomers. To address this issue, we have developed a reversed-phase high-performance liquid chromatography (RP-HPLC) method with tandem mass spectrometry (MS/MS) to analyze the phospholipids of various plant-pathogenic bacteria with a focus on BCFA containing phospholipids. The study revealed the separation of three isomeric phosphatidylethanolamines (PE) depending on the number of bound BCFA to NCFA. The validation of the retention order was based on available reference standards in combination with the analysis of hydrolyzed fatty acids through gas chromatography with mass spectrometry (GC/MS) after fractionation. Additionally, the transferability of the retention order to other major lipid classes, such as phosphatidylglycerols (PG) and cardiolipins (CL), was thoroughly examined. Using the information regarding the retention behavior, the phospholipid profile of six plant-pathogenic bacteria was structurally elucidated. Furthermore, the developed LC-MS/MS method was used to classify the plant-pathogenic bacteria based on the number of bound BCFA in the phospholipidome.

QSAR Reveals Decreased Lipophilicity of Polar Residues Determines the Selectivity of Antimicrobial Peptide Activity

Antimicrobial resistance has increased rapidly, causing daunting morbidity and mortality rates worldwide. Antimicrobial peptides (AMPs) have emerged as promising alternatives to traditional antibiotics due to their broad range of targets and low tendency to elicit resistance. However, potent antimicrobial activity is often accompanied by excessive cytotoxicity toward host cells, leading to a halt in AMP therapeutic development. Here, we present multivariate analyses that correlate 28 peptide properties to the activity and toxicity of 46 diverse African-derived AMPs and identify the negative lipophilicity of polar residues as an essential physiochemical property for selective antimicrobial activity. Twenty-seven active AMPs are identified, of which the majority are of scorpion or frog origin. Of these, thirteen are novel with no previously reported activities. Principal component analysis and quantitative structure-activity relationships (QSAR) reveal that overall hydrophobicity, lipophilicity, and residue side chain surface area affect the antimicrobial and cytotoxic activity of an AMP. This has been well documented previously, but the present QSAR analysis additionally reveals that a decrease in the lipophilicity, contributed by those amino acids classified as polar, confers selectivity for a peptide to pathogen over mammalian cells. Furthermore, an increase in overall peptide charge aids selectivity toward Gram-negative bacteria and fungi, while selectivity toward Gram-positive bacteria is obtained through an increased number of small lipophilic residues. Finally, a conservative increase in peptide size in terms of sequence length and molecular weight also contributes to improved activity without affecting toxicity. Our findings suggest a novel approach for the rational design or modification of existing AMPs to increase pathogen selectivity and enhance therapeutic potential.

Effect of lipopeptide extracted from Bacillus licheniformis on the expression of bap and luxI genes in multi-drug-resistant Acinetobacter baumannii and Pseudomonas aeruginosa

Recently, opportunistic pathogens like Acinetobacter baumannii and Pseudomonas aeruginosa have caused concern due to their ability to cause antibiotic resistance in weakened immune systems. As a result, researchers are always seeking efficient antimicrobial agents to tackle this issue. The hypothesis of the recent study was that probiotic products derived from bacteria would be effective in reducing drug resistance in other bacteria. This research aimed to investigate the antimicrobial properties of probiotic products from various bacterial strains, including Lactobacillus rhamnosus, Pediococcus acidilactisi, Bacillus coagulans, Bacillus subtilis, and Bacillus licheniformis. These were tested against multi-drug-resistant (MDR) standard strains A. baumannii and P. aeruginosa. B. licheniformis was found to be the most effective probiotic strain, possessing the LanA and LanM lantibiotic genes. The lipopeptide nature of the probiotic product was confirmed through high-performance liquid chromatography (HPLC) and Fourier-transform infrared spectroscopy (FTIR) techniques. The anti-biofilm and antimicrobial properties of this probiotic were measured using an SEM electron microscope and minimum inhibitory concentration (MIC) test. Real-time PCR (qPCR) was used to compare the expression of bap and luxI genes, which are considered virulence factors of drug-resistant bacteria, before and after treatment with antimicrobial agents. The MIC results showed that the probiotic product prevented the growth of bacteria at lower concentrations compared to antibiotics. In addition, the ΔΔCqs indicated that gene expression was significantly down-regulated following treatment with the obtained probiotic product. It was found that B. licheniformis probiotic products could reduce drug resistance in other bacteria, making it a potential solution to antibiotic resistance.

Antibacterial efficacy of an ultra-short palmitoylated random peptide mixture in mouse models of infection by carbapenem-resistant Klebsiella pneumoniae

Indiscriminate use of antibiotics has imposed a selective pressure for the rapid rise in bacterial resistance, creating an urgent need for novel therapeutics for managing bacterial infectious diseases while counteracting bacterial resistance. Carbapenem-resistant Klebsiella pneumoniae strains have become a major challenge in modern medicine due to their ability to cause an array of severe infections. Recently, we have shown that the 20-mer random peptide mixtures are effective therapeutics against three ESKAPEE pathogens. Here, we evaluated the toxicity, biodistribution, bioavailability, and efficacy of the ultra-short palmitoylated 5-mer phenylalanine:lysine (FK5P) random peptide mixtures against multiple clinical isolates of carbapenem-resistant K. pneumoniae and K. oxytoca. We demonstrate the FK5P rapidly and effectively killed various strains of K. pneumoniae, inhibited the formation of biofilms, and disrupted mature biofilms. FK5P displayed strong toxicity profiles both in vitro and in mice, with prolonged favorable biodistribution and a long half-life. Significantly, FK5P reduced the bacterial burden in mouse models of acute pneumonia and bacteremia and increased the survival rate in a mouse model of bacteremia. Our results demonstrate that FK5P is a safe and promising therapy against Klebsiella species as well as other ESKAPEE pathogens.

Application of antimicrobial peptides in plant protection: making use of the overlooked merits

Pathogen infection is one of the major causes of yield loss in the crop field. The rapid increase of antimicrobial resistance in plant pathogens has urged researchers to develop both new pesticides and management strategies for plant protection. The antimicrobial peptides (AMPs) showed potential on eliminating plant pathogenic fungi and bacteria. Here, we first summarize several overlooked advantages and merits of AMPs, which includes the steep dose-response relations, fast killing ability, broad synergism, slow resistance selection. We then discuss the possible application of AMPs for plant protection with above merits, and highlight how AMPs can be incorporated into a more efficient integrated management system that both increases the crop yield and reduce resistance evolution of pathogens.

Natural and Man-Made Cyclic Peptide-Based Antibiotics

In recent years, an increasing number of drug-resistant bacterial strains have been identified due to the abuse of antibiotics, which seriously threatens human and animal health. Antimicrobial peptides (AMPs) have become one of the most effective weapons to solve this problem. AMPs have little tendency to induce drug resistance and have outstanding antimicrobial effects. The study of AMPs, especially cyclic peptides, has become a hot topic. Among them, macrocyclic AMPs have received extensive attention. This mini-review discusses the structures and functions of the dominant cyclic natural and synthetic AMPs and provides a little outlook on the future direction of cyclic AMPs.

Lights and Shadows on the Therapeutic Use of Antimicrobial Peptides

The emergence of antimicrobial-resistant infections is still a major concern for public health worldwide. The number of pathogenic microorganisms capable of resisting common therapeutic treatments are constantly increasing, highlighting the need of innovative and more effective drugs. This phenomenon is strictly connected to the rapid metabolism of microorganisms: due to the huge number of mutations that can occur in a relatively short time, a colony can “adapt” to the pharmacological treatment with the evolution of new resistant species. However, the shortage of available antimicrobial drugs in clinical use is also caused by the high costs involved in developing and marketing new drugs without an adequate guarantee of an economic return; therefore, the pharmaceutical companies have reduced their investments in this area. The use of antimicrobial peptides (AMPs) represents a promising strategy for the design of new therapeutic agents. AMPs act as immune defense mediators of the host organism and show a poor ability to induce antimicrobial resistance, coupled with other advantages such as a broad spectrum of activity, not excessive synthetic costs and low toxicity of both the peptide itself and its own metabolites. It is also important to underline that many antimicrobial peptides, due to their inclination to attack cell membranes, have additional biological activities, such as, for example, as anti-cancer drugs. Unfortunately, they usually undergo rapid degradation by proteolytic enzymes and are characterized by poor bioavailability, preventing their extensive clinical use and landing on the pharmaceutical market. This review is focused on the strength and weak points of antimicrobial peptides as therapeutic agents. We give an overview on the AMPs already employed in clinical practice, which are examples of successful strategies aimed at overcoming the main drawbacks of peptide-based drugs. The review deepens the most promising strategies to design modified antimicrobial peptides with higher proteolytic stability with the purpose of giving a comprehensive summary of the commonly employed approaches to evaluate and optimize the peptide potentialities.

Rationales Design von Phe-BODIPY-Aminosäuren als fluorogene Bausteine für den peptidbasierten Nachweis von Candida-Infektionen im Harntrakt

Pilzinfektionen, die durch Candida‐Arten verursacht werden, gehören zu den häufigsten Infektionen bei Krankenhauspatienten. Die derzeitigen Methoden zum Nachweis von Candida‐Pilzzellen in klinischen Proben beruhen jedoch auf zeitaufwändigen Analysen, die eine schnelle und zuverlässige Diagnose erschweren. In diesem Beitrag beschreiben wir die rationale Entwicklung neuer Phe‐BODIPY‐Aminosäuren als kleine fluorogene Bausteine und ihre Anwendung zur Erzeugung fluoreszierender antimikrobieller Peptide für die schnelle Markierung von Candida‐Zellen im Urin. Mit Hilfe von computergestützten Berechnungen haben wir das fluorogene Verhalten von BODIPY‐substituierten aromatischen Aminosäuren analysiert und Bioaktivitäts‐ und konfokale Mikroskopieexperimente bei verschiedenen Stämmen durchgeführt, um den Nutzen und die Vielseitigkeit von Peptiden mit Phe‐BODIPYs zu bestätigen. Schließlich haben wir einen einfachen und sensitiven fluoreszensbasierten Test zum Nachweis von Candida albicans in menschlichen Urinproben entwickelt.

Rational Design of Phe-BODIPY Amino Acids as Fluorogenic Building Blocks for Peptide-Based Detection of Urinary Tract Candida Infections

Fungal infections caused by Candida species are among the most prevalent in hospitalized patients. However, current methods for the detection of Candida fungal cells in clinical samples rely on time-consuming assays that hamper rapid and reliable diagnosis. Herein, we describe the rational development of new Phe-BODIPY amino acids as small fluorogenic building blocks and their application to generate fluorescent antimicrobial peptides for rapid labelling of Candida cells in urine. We have used computational methods to analyse the fluorogenic behaviour of BODIPY-substituted aromatic amino acids and performed bioactivity and confocal microscopy experiments in different strains to confirm the utility and versatility of peptides incorporating Phe-BODIPYs. Finally, we have designed a simple and sensitive fluorescence-based assay for the detection of Candida albicans in human urine samples.

Antimicrobial Random Peptide Mixtures Eradicate Acinetobacter baumannii Biofilms and Inhibit Mouse Models of Infection

Antibiotic resistance is one of the greatest crises in human medicine. Increased incidents of antibiotic resistance are linked to clinical overuse and overreliance on antibiotics. Among the ESKAPE pathogens, Acinetobacter baumannii, especially carbapenem-resistant isolates, has emerged as a significant threat in the context of blood, urinary tract, lung, and wound infections. Therefore, new approaches that limit the emergence of antibiotic resistant A. baumannii are urgently needed. Recently, we have shown that random peptide mixtures (RPMs) are an attractive alternative class of drugs to antibiotics with strong safety and pharmacokinetic profiles. RPMs are antimicrobial peptide mixtures produced by incorporating two amino acids at each coupling step, rendering them extremely diverse but still defined in their overall composition, chain length, and stereochemistry. The extreme diversity of RPMs may prevent bacteria from evolving resistance rapidly. Here, we demonstrated that RPMs rapidly and efficiently kill different strains of A. baumannii, inhibit biofilm formation, and disrupt mature biofilms. Importantly, RPMs attenuated bacterial burden in mouse models of acute pneumonia and soft tissue infection and significantly reduced mouse mortality during sepsis. Collectively, our results demonstrate RPMs have the potential to be used as powerful therapeutics against antibiotic-resistant A. baumannii.

The characteristics and roles of antimicrobial peptides as potential treatment for antibiotic-resistant pathogens: a review

The emergence of antibiotic-resistant bacteria has become a significant and ever-increasing threat to global public health, increasing both morbidity and mortality rates, and the financial burden on health services. Infection by drug-resistant bacteria is anticipated to contribute to the demise of almost 10 million people by the year 2050 unless a competent and effective response is devised to engage with this issue. The emergence and spread of resistance are commonly caused by the excessive or inappropriate use of antibiotics and substandard pharmaceuticals. It arises when pathogens adapt to different conditions and develop self-defence mechanisms. Currently, novel antimicrobial peptides (AMPs) have been reported to be the sole cure for some clinical cases of infectious diseases such as sepsis and skin infections, although these agents may, on occasion, require administration together with an adjunctive low-dose antibiotic. Although AMPs are a promising alternative form of anti-microbial therapy and easily applied in the medical sector, they still have limitations that should not be taken lightly. Hence, this review explores the characteristics, advantages and disadvantages of AMPs for their potential in treating antibiotic-resistant pathogens.

A mixed chirality α-helix in a stapled bicyclic and a linear antimicrobial peptide revealed by X-ray crystallography

The peptide α-helix is right-handed when containing amino acids with l-chirality, and left-handed with d-chirality, however mixed chirality peptides generally do not form α-helices unless a helix inducer such as the non-natural residue amino-isobutyric acid is used. Herein we report the first X-ray crystal structures of mixed chirality α-helices in short peptides comprising only natural residues as the example of a stapled bicyclic and a linear membrane disruptive amphiphilic antimicrobial peptide (AMP) containing seven l- and four d-residues, as complexes of fucosylated analogs with the bacterial lectin LecB. The mixed chirality α-helices are superimposable onto the homochiral α-helices and form under similar conditions as shown by CD spectra and MD simulations but non-hemolytic and resistant to proteolysis. The observation of a mixed chirality α-helix with only natural residues in the protein environment of LecB suggests a vast unexplored territory of α-helical mixed chirality sequences and their possible use for optimizing bioactive α-helical peptides.

We report the first X-ray crystal structures of mixed chirality α-helices comprising only natural residues as the example of bicyclic and linear membrane disruptive amphiphilic antimicrobial peptides containing seven l- and four d-residues.

Antiviral Activity of Peptide-Based Assemblies

The COVID-19 pandemic highlighted the importance of developing surfaces and coatings with antiviral activity. Here, we present, for the first time, peptide-based assemblies that can kill viruses. The minimal inhibitory concentration (MIC) of the assemblies is in the range tens of micrograms per milliliter. This value is 2 orders of magnitude smaller than the MIC of metal nanoparticles. When applied on a surface, by drop casting, the peptide spherical assemblies adhere to the surface and form an antiviral coating against both RNA- and DNA-based viruses including coronavirus. Our results show that the coating reduced the number of T4 bacteriophages (DNA-based virus) by 3 log, compared with an untreated surface and 6 log, when compared with a stock solution. Importantly, we showed that this coating completely inactivated canine coronavirus (RNA-based virus). This peptide-based coating can be useful wherever sterile surfaces are needed to reduce the risk of viral transmission.

Discovery, Optimization, and Clinical Application of Natural Antimicrobial Peptides

Antimicrobial peptides (AMPs) are widespread in multicellular organisms. These structurally diverse molecules are produced as the first line of defense against pathogens such as bacteria, viruses, fungi, and parasites. Also known as host defense peptides in higher eukaryotic organisms, AMPs display immunomodulatory and anticancer activities. During the last 30 years, technological advances have boosted the research on antimicrobial peptides, which have also attracted great interest as an alternative to tackling the antimicrobial resistance scenario mainly provoked by some bacterial and fungal pathogens. However, the introduction of natural AMPs in clinical trials faces challenges such as proteolytic digestion, short half-lives, and cytotoxicity upon systemic and oral application. Therefore, some strategies have been implemented to improve the properties of AMPs aiming to be used as effective therapeutic agents. In the present review, we summarize the discovery path of AMPs, focusing on preclinical development, recent advances in chemical optimization and peptide delivery systems, and their introduction into the market.

The multifaceted nature of antimicrobial peptides: current synthetic chemistry approaches and future directions

Bacterial infections caused by 'superbugs' are increasing globally, and conventional antibiotics are becoming less effective against these bacteria, such that we risk entering a post-antibiotic era. In recent years, antimicrobial peptides (AMPs) have gained significant attention for their clinical potential as a new class of antibiotics to combat antimicrobial resistance. In this review, we discuss several facets of AMPs including their diversity, physicochemical properties, mechanisms of action, and effects of environmental factors on these features. This review outlines various chemical synthetic strategies that have been applied to develop novel AMPs, including chemical modifications of existing peptides, semi-synthesis, and computer-aided design. We will also highlight novel AMP structures, including hybrids, antimicrobial dendrimers and polypeptides, peptidomimetics, and AMP-drug conjugates and consider recent developments in their chemical synthesis.

A Bifunctional Peptide Conjugate That Controls Infections of Erwinia amylovora in Pear Plants

In this paper, peptide conjugates were designed and synthesized by incorporating the antimicrobial undecapeptide BP16 at the C- or N-terminus of the plant defense elicitor peptide flg15, leading to BP358 and BP359, respectively. The evaluation of their in vitro activity against six plant pathogenic bacteria revealed that BP358 displayed MIC values between 1.6 and 12.5 μM, being more active than flg15, BP16, BP359, and an equimolar mixture of BP16 and flg15. Moreover, BP358 was neither hemolytic nor toxic to tobacco leaves. BP358 triggered the overexpression of 6 out of the 11 plant defense-related genes tested. Interestingly, BP358 inhibited Erwinia amylovora infections in pear plants, showing slightly higher efficacy than the mixture of BP16 and flg15, and both treatments were as effective as the antibiotic kasugamycin. Thus, the bifunctional peptide conjugate BP358 is a promising agent to control fire blight and possibly other plant bacterial diseases.

Efficacy of short-synthetic antifungal peptides on pathogenic Aspergillus flavus

The efficacies of three short synthetic antifungal peptides were tested for their inhibitory action on pathogenic fungi, Aspergillus flavus. The sequences of the short synthetic peptides are PPD1- FRLHF, 66-10-FRLKFH, 77-3- FRLKFHF, respectively. These test peptides inhibited fungal growth and showed a membranolytic activity. The fungal biomass and ergosterol levels were significantly low in peptides treated samples. Further, the fungal cell wall component chitin was also found to be lower in peptides treated samples. Scanning electron microscopic images also showed highly wrinkled fungal mycelia. Significant membrane permeabilisation as well as potassium ion leakage was also observed in fungal samples treated with peptides. To assess the membrane damage, the uptake of Sytox green dye was employed. At tested concentration, peptides induced fungal membrane damage as evidenced by the green fluorescence. Further, at tested concentration, these peptides induced an oxidative stress in A.flavus as evidenced by an increase in the ROS production, malondialdehyde levels, increase in the antioxidant enzymes - superoxide dismutase, catalase with concomitant decrease in the reduced glutathione content. Additionally, a growth dependent reduction in aflatoxin levels were also observed in peptides treated samples. Docking studies on the interaction of the peptides with a trans-membrane protein calcium ATPase of A. flavus showed that all the peptides were able to bind to the protein with high z rank score. The activity of the calcium ATPase was significantly decreased in peptides treated fungal samples, thereby validating the docking results. Among all the tested peptides, 77-3 peptide exhibited the maximal membrane damage property.

Random Peptide Mixtures as Safe and Effective Antimicrobials against Pseudomonas aeruginosa and MRSA in Mouse Models of Bacteremia and Pneumonia

Antibiotic resistance is a daunting challenge in modern medicine, and novel approaches that minimize the emergence of resistant pathogens are desperately needed. Antimicrobial peptides are newer therapeutics that attempt to do this; however, they fall short because of low to moderate antimicrobial activity, low protease stability, susceptibility to resistance development, and high cost of production. The recently developed random peptide mixtures (RPMs) are promising alternatives. RPMs are synthesized by incorporating a defined proportion of two amino acids at each coupling step rather than just one, making them highly variable but still defined in their overall composition, chain length, and stereochemistry. Because RPMs have extreme diversity, it is unlikely that bacteria would be capable of rapidly evolving resistance. However, their efficacy against pathogens in animal models of human infectious diseases remained uncharacterized. Here, we demonstrated that RPMs have strong safety and pharmacokinetic profiles. RPMs rapidly killed both Pseudomonas aeruginosa and Staphylococcus aureus efficiently and disrupted preformed biofilms by both pathogens. Importantly, RPMs were efficacious against both pathogens in mouse models of bacteremia and acute pneumonia. Our results demonstrate that RPMs are potent broad-spectrum therapeutics against antibiotic-resistant pathogens.

A Synergic Potential of Antimicrobial Peptides against Pseudomonas syringae pv. actinidiae

Pseudomonas syringae pv. actinidiae (Psa) is the pathogenic agent responsible for the bacterial canker of kiwifruit (BCK) leading to major losses in kiwifruit productions. No effective treatments and measures have yet been found to control this disease. Despite antimicrobial peptides (AMPs) having been successfully used for the control of several pathogenic bacteria, few studies have focused on the use of AMPs against Psa. In this study, the potential of six AMPs (BP100, RW-BP100, CA-M, 3.1, D4E1, and Dhvar-5) to control Psa was investigated. The minimal inhibitory and bactericidal concentrations (MIC and MBC) were determined and membrane damaging capacity was evaluated by flow cytometry analysis. Among the tested AMPs, the higher inhibitory and bactericidal capacity was observed for BP100 and CA-M with MIC of 3.4 and 3.4-6.2 µM, respectively and MBC 3.4-10 µM for both. Flow cytometry assays suggested a faster membrane permeation for peptide 3.1, in comparison with the other AMPs studied. Peptide mixtures were also tested, disclosing the high efficiency of BP100:3.1 at low concentration to reduce Psa viability. These results highlight the potential interest of AMP mixtures against Psa, and 3.1 as an antimicrobial molecule that can improve other treatments in synergic action.

Stereorandomization as a Method to Probe Peptide Bioactivity

Solid-phase peptide synthesis (SPPS) is usually performed with optically pure building blocks to prepare peptides as single enantiomers. Herein we report that SPPS using racemic amino acids provides stereorandomized (sr) peptides, containing up to billions of different stereoisomers, as well-defined single HPLC peaks, single mass products with high yield, which can be used to investigate peptide bioactivity. To exemplify our method, we show that stereorandomization abolishes the membrane-disruptive effect of α-helical amphiphilic antimicrobial peptides but preserves their antibiofilm effect, implying different mechanisms involving folded versus disordered conformations. For antimicrobial peptide dendrimers by contrast, stereorandomization preserves antibacterial, membrane-disruptive, and antibiofilm effects but reduces hemolysis and cytotoxicity, thereby increasing their therapeutic index. Finally, we identify partially stereorandomized analogues of the last resort cyclic peptide antibiotic polymyxin B with preserved antibacterial activity but lacking membrane-disruptive and lipopolysaccharide-neutralizing activity, pointing to the existence of additional targets.

Feleucin-K3 Analogue with an α-(4-Pentenyl)-Ala Substitution at the Key Site Has More Potent Antimicrobial and Antibiofilm Activities in Vitro and in Vivo

The development of antimicrobial compounds is now regarded as an urgent problem. Antimicrobial peptides (AMPs) have great potential to become novel antimicrobial drugs. Feleucin-K3 is an α-helical cationic AMP isolated from the skin secretion of the Asian bombinid toad species Bombina orientalis and has antimicrobial activity. In our previous studies, amino acid scanning of Feleucin-K3 was performed to determine the key site affecting its activity. In this study, we investigated and synthesized a series of analogues that have either a natural or an unnatural hydrophobic amino acid substitution at the fourth amino acid residue of Feleucin-K3. Among these analogues, Feleucin-K59 (K59), which has an α-(4-pentenyl)-Ala substitution, was shown to have increased antimicrobial activity against both standard and drug-resistant strains of clinical common bacteria, improved stability, no hemolytic activity at antimicrobial concentrations, and no resistance. In addition, K59 has potent antibiofilm activity in vitro. More importantly, K59 showed better antimicrobial and antibiofilm activities against drug-resistant bacteria in in vivo experiments in mice than traditional antibiotics. In this preliminary study of the mechanism of action, we found that K59 could rapidly kill bacteria by a dual-action mechanism of disrupting the cell membrane and binding to intracellular DNA, thus making it difficult for bacteria to develop resistance.

Synergistic Effect of Propidium Iodide and Small Molecule Antibiotics with the Antimicrobial Peptide Dendrimer G3KL against Gram-Negative Bacteria

There is an urgent need to develop new antibiotics against multidrug-resistant bacteria. Many antimicrobial peptides (AMPs) are active against such bacteria and often act by destabilizing membranes, a mechanism that can also be used to permeabilize bacteria to other antibiotics, resulting in synergistic effects. We recently showed that G3KL, an AMP with a multibranched dendritic topology of the peptide chain, permeabilizes the inner and outer membranes of Gram-negative bacteria including multidrug-resistant strains, leading to efficient bacterial killing. Here, we show that permeabilization of the outer and inner membranes of Pseudomonas aeruginosa by G3KL, initially detected using the DNA-binding fluorogenic dye propidium iodide (PI), also leads to a synergistic effect between G3KL and PI in this bacterium. We also identify a synergistic effect between G3KL and six different antibiotics against the Gram-negative Klebsiella pneumoniae, against which G3KL is inactive.

A Paper-Based Near-Infrared Optical Biosensor for Quantitative Detection of Protease Activity Using Peptide-Encapsulated SWCNTs

A protease is an enzyme that catalyzes proteolysis of proteins into smaller polypeptides or single amino acids. As crucial elements in many biological processes, proteases have been shown to be informative biomarkers for several pathological conditions in humans, animals, and plants. Therefore, fast, reliable, and cost-effective protease biosensors suitable for point-of-care (POC) sensing may aid in diagnostics, treatment, and drug discovery for various diseases. This work presents an affordable and simple paper-based dipstick biosensor that utilizes peptide-encapsulated single-wall carbon nanotubes (SWCNTs) for protease detection. Upon enzymatic digestion of the peptide, a significant drop in the photoluminescence (PL) of the SWCNTs was detected. As the emitted PL is in the near-infrared region, the developed biosensor has a good signal to noise ratio in biological fluids. One of the diseases associated with abnormal protease activity is pancreatitis. In acute pancreatitis, trypsin concentration could reach up to 84 µg/mL in the urine. For proof of concept, we demonstrate the feasibility of the proposed biosensor for the detection of the abnormal levels of trypsin activity in urine samples.

Antibacterial lipo-random peptide mixtures exhibit high selectivity and synergistic interactions

Random peptide mixtures (RPMs) have been recently proposed as powerful antimicrobial compounds. These are unique mixtures of peptides synthesized by random combination of a cationic and a hydrophobic amino acid. Here, we introduce a new type of antimicrobial compounds, short lipo-RPMs, which result from N-palmitoylation of RPMs. We report the characterization of 5-mer lipo-RPMs containing l-phenylalanine and d-lysine, named p-FdK5. p-FdK5 had high antibacterial activity against several bacterial strains and was able to reduce disease severity caused by a plant pathogen. We further synthesized and studied all 32 (2⁵) possible lipopeptides that compose the p-FdK5 mixture. We showed that the antibacterial activity of specific lipopeptides depends on the peptide hydrophobicity and on the location of the hydrophobic amino acids relative to the palmitic acid. Interestingly, synergism assays revealed positive interactions between different sequence-specific lipopeptides in terms of antimicrobial activity.

Synthesis and Biological Studies of Dodecameric Cationic Antimicrobial Peptides Containing Tetrahydrofuran Amino Acids

We report here a concise route to synthesize various stereoisomers of tetrahydrofuran amino acids (TAAs) and the synthesis of TAA-containing linear cationic dodecapeptides. Some of these linear peptides show slightly better antimicrobial activities than their tetra- and octameric congeners, but no activity against Mycobacterium tuberculosis, for which octapeptides exhibited by far the best results; this implies that antibacterial activity is dependent on the length of these linear peptides. All the dodecapeptides described here were found to be toxic in nature against Vero cells. The study helps to delineate the optimal length of this series of linear peptides and select potential leads in the development of novel cationic peptide-based antibiotics.

Antimicrobial efficacy of Cecropin A (1-7)- Melittin and Lactoferricin (17-30) against multi-drug resistant Salmonella Enteritidis

The present study evaluated intracellular antibacterial efficacy of two short-chain cationic antimicrobial peptides (AMPs) namely, Cecropin A (1-7)-Melittin and lactoferricin (17-30) against three field strains of multi-drug resistant Salmonella Enteritidis. Initially, antimicrobial ability of both the AMPs was evaluated for their minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against multi-drug resistant S. Enteritidis strains. Besides, the AMPs were evaluated for its in vitro stability (high-end temperatures, proteases, physiological concentrations of cationic salts and pH) and safety (haemolytic assay in sheep erythrocytes; cytotoxicity assay in murine macrophage RAW 264.7 cell line and human epithelioma HEp-2 cell line and beneficial gut lactobacilli). Later, a time-kill assay was performed to assess the intracellular antibacterial activity of Cecropin A (1-7)-Melittin and lactoferricin (17-30) against multi-drug resistant S. Enteritidis in RAW 264.7 and HEp-2 cells. The observed MBC values of Cecropin A (1-7)-Melittin and lactoferricin (17-30) against multi-drug resistant S. Enteritidis (128 μM; 256 μM) were generally twice or four-fold greater than the MIC values (64 μM). Further, both the AMPs were found variably stable after exposure at high-end temperatures (70 °C and 90 °C), protease treatment (trypsin, proteinase K, lysozyme), higher concentration of physiological salts (150 mM NaCl and 2 mM MgCl₂) and hydrogen ion concentrations (pH 4.0 to 8.0). Both the AMPs were found non-haemolytic on sheep erythrocytes, revealed minimal cytotoxicity in RAW 264.7 and HEp-2 cells, and was tested safe against beneficial gut lactobacilli (L. acidophilus and L. rhamnosus). Intracellular bacteriostatic effect with both cationic AMPs against multi-drug resistant S. Enteritidis was evident in RAW 264.7 cells; however, in both the cell lines, the significant bactericidal effect was not observed (P > 0.05) with both cationic AMPs understudy against multi-drug resistant S. Enteritidis. Based on the results of the present study, both the cationic AMPs understudy may not be useful for the intracellular elimination of multi-drug resistant S. Enteritidis; hence, further studies such as conjugation of these AMPs with either cell-penetrating peptides (CPP) and/or nanoparticles (NPs) are warranted.

Cu2+ reduces hemolytic activity of the antimicrobial peptide HMPI and enhances its trypsin resistance

Nowadays, drug-resistant microbes are becoming a serious clinical problem threatening people's health and life. Antimicrobial peptides (AMPs) are believed to be potential alternatives of conventional antibiotics to combat the threat of drug-resistant microbes. However, the susceptibility of AMPs toward proteases is one of the major problems limiting their clinical use. In the present study, we reported the effect of Cu2+ on the bioactivity of AMP HMPI. We found that the addition of Cu2+ could improve the protease resistance of AMP HMPI without affecting its bioactivity. Notably, after the binding of Cu2+ with HMPI, the hemolytic activity of HMPI was greatly decreased. In addition, our results also demonstrated that the addition of Cu2+ increased the production of reactive oxygen species in the fungal cells, which may be a supplement for the antifungal activity of HMPI. In conclusion, the introduction of Cu2+ may provide an inorganic strategy to improve the stability and decrease the hemolytic activity of AMP HMPI, while maintaining its antifungal activity.

Identification and Rational Design of a Novel Antibacterial Peptide Dermaseptin-AC from the Skin Secretion of the Red-Eyed Tree Frog Agalychnis callidryas

Antibiotic resistance represents a tremendous contemporary clinical challenge. Given this challenge, antimicrobial peptides (AMPs) are regarded as one of the most promising new options for next-generation lead antibiotics. Here, we describe the antibacterial activities of a cationic peptide named DRP-AC4, obtained from frog skin secretion using shotgun cloning. Two modified peptides were derived by substituting the sequence of amino acids to complete the hydrophobic face (DRP-AC4b) and increase net charge (DRP-AC4a), respectively. The activity and cytotoxicity of these two peptides were compared. DRP-AC4a displayed significantly increased potency against bacteria compared to the natural peptide. It should be noted, however, that both analogue peptides demonstrated higher lytic ability than the natural peptide against the membranes of mammalian erythrocytes. At the same time, all three peptides displayed lower hemolytic activity compared to their antibacterial activity. Here, we demonstrate that AMPs have more complex activity mechanisms and faster bactericidal rates than traditional antibiotics, which may be one of the reasons why bacteria do not develop resistance to them. These discoveries provide interesting insights into the discovery and development of novel drugs from natural sources.

Peptides With Triplet-Tryptophan-Pivot Promoted Pathogenic Bacteria Membrane Defects

Development of probiotic-ineffective antimicrobial peptides (AMPs)-based coatings that can kill pathogenic bacteria at low concentrations but are essentially harmless (even high concentrations) to probiotic organisms is a relatively new trend for therapy against GI tract infections. In this study, a series of triplet-tryptophan-pivot peptides with various hydrophilic amino acids was constructed. One AMP in particular, S7, showed bactericidal activity against Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia coli and antibiotic-resistant Staphylococcus aureus, yet was shown to be harmless to Lactobacillus rhamnosus, a key GI tract commensal. Furthermore, antibacterial mechanism assays, drug resistance assays, and mouse model tests suggested that S7 was useful in a clinical setting as it proved to significantly reduce bacterial load and cytokines (TNF-α, IL-6; P < 0.05) with a low probability of resistance via bacterial membrane physical destruction and formation of intracellular ROS. Combined, the results show that a triplet-tryptophan-pivot peptide containing a pair of serine residues was an excellent pathogen-selective candidate for medical devices and was potentially useful in food preservation, crop protection, and human health.

The Ultrashort Peptide OW: A New Antibiotic Adjuvant

BACKGROUND

The over use of current antibiotics and low discovery rate of the new ones are leading to rapid development of multidrug-resistant pathogens worldwide. Antimicrobial peptides have shown promising results against multidrug-resistant bacteria.

OBJECTIVE

To investigate the antimicrobial activity of a new ultrashort hexapeptide (OW).

METHODS

The OW hexapeptide was designed and tested against different strains of bacteria with different levels of sensitivity. Bacterial susceptibility assays were performed according to the guidelines of the Clinical and Laboratory Institute (CLSI). The synergistic studies were then conducted using the Checkerboard assay. This was followed by checking the hemolytic effect of the hexapeptide against human blood cells and Human Embryonic Kidney cell line (HEK293). Finally, the antibiofilm activities of the hexapeptide were studied using the Biofilm Calgary method.

RESULTS

Synergistic assays showed that OW has synergistic effects with antibiotics of different mechanisms of action. It showed an outstanding synergism with Rifampicin against methicillin resistant Staphylococcus aureus; ΣFIC value was 0.37, and the MIC value of Rifampicin was decreased by 85%. OW peptide also displayed an excellent synergism with Ampicillin against multidrug-resistant Pseudomonas aeruginosa, with ΣFIC value of less than 0.38 and a reduction of more than 96% in the MIC value of Ampicillin.

CONCLUSION

This study introduced a new ultrashort peptide (OW) with promising antimicrobial potential in the management of drug-resistant infectious diseases as a single agent or in combination with commonly used antibiotics. Further studies are needed to investigate the exact mechanism of action of these peptides.

Fluorescence Imaging of Bacterial Killing by Antimicrobial Peptide Dendrimer G3KL

We recently discovered that peptide dendrimers such as G3KL ((KL)₈(KKL)₄(KKL)₂KKL, K = branching l-lysine) exert strong activity against Gram-negative bacteria including Pseudomonas aeruginosa, Acinetobacter baumannii, and Escherichia coli. Herein, we report a detailed mechanistic study using fluorescence labeled analogs bearing fluorescein (G3KL-Fluo) or dansyl (G3KL-Dansyl), which show a similar bioactivity profile as G3KL. Imaging bacterial killing by super-resolution stimulated emission depletion (STED) microscopy, time-lapse imaging, and transmission electron microscopy (TEM) reveals that the dendrimer localizes at the bacterial membrane, induces membrane depolarization and permeabilization, and destroys the outer leaflet and the inner membrane. G3KL accumulates in bacteria against which it is active; however, it only weakly penetrates into eukaryotic cells without inducing significant toxicity. G3KL furthermore binds to lipopolysaccharide (LPS) and inhibits the LPS induced release of TNF-α by macrophages, similarly to polymyxin B. Taken together, these experiments show that G3KL behaves as a potent membrane disruptive antimicrobial peptide.

Comparison of the structure and function of a chimeric peptide modified titanium surface

Peri-implantitis is a plaque-initiating infectious disease that can be prevented by interfering with the initial bacterial attachment. At present, surface modification of implants using antimicrobial peptides can interfere with the adhesion of streptococci. In this study, the structure and function of chimeric peptides were compared to get a strategy to modify a Ti surface. Compared to the antimicrobial activity with a fragment of hBD-3, the bifunctional and multifunctional chimeric peptides retain their antimicrobial function. All peptides showed antimicrobial activity against streptococcus in biofilm and planktonic conditions. The results demonstrate significant improvement in reducing bacterial colonization onto titanium surfaces. According to the results of structure analysis, the antimicrobial activity of tyrosine in hBD3-3 was stronger than that of the alpha helix in bifunctional or multifunctional chimeric peptides. Rigid connections were proved to avoid functional domain changes due to the interaction of charges. These results indicated that the endogenous peptide fragments modifying the Ti surface could provide an environmentally friendly approach to reduce or prevent the occurrence of peri-implant diseases.

The antimicrobial activity of Tyr structure in hBD3-3 is stronger than that of the α-helix structure in multifunctional chimeric peptides. Rigid connections avoid functional domain changes. Endogenous peptide fragments on a Ti surface could reduce peri-implant diseases.

Antibiotic Discovery with Synthetic Fermentation: Library Assembly, Phenotypic Screening, and Mechanism of Action of β-Peptides Targeting Penicillin-Binding Proteins

In analogy to biosynthetic pathways leading to bioactive natural products, synthetic fermentation generates mixtures of molecules from simple building blocks under aqueous, biocompatible conditions, allowing the resulting cultures to be directly screened for biological activity. In this work, a novel β-peptide antibiotic was successfully identified using the synthetic fermentation platform. Phenotypic screening was carried out in an initially random fashion, allowing simple identification of active cultures. Subsequent deconvolution, focused screening, and structure-activity relationship studies led to the identification of a potent antimicrobial peptide, showing strong selectivity for our model system Bacillus subtilis over human HEK293 cells. To determine the antibacterial mechanism of action, a peptide probe bearing a photoaffinity tag was readily synthesized through the use of appropriate synthetic fermentation building blocks and utilized for target identification using a quantitative mass spectrometry-based strategy. The chemoproteomic approach led to the identification of a number of bacterial membrane proteins as prospective targets. These findings were validated through binding affinity studies with penicillin-binding protein 4 using microscale thermophoresis, with the bioactive peptide showing a dissociation constant ( K_d) in the nanomolar range. Through these efforts, we provide a proof of concept for the synthetic fermentation approach presented here as a new strategy for the phenotypic discovery of novel bioactive compounds.

Amino Acid-Modified Conjugated Oligomer Self-Assembly Hydrogel for Efficient Capture and Specific Killing of Antibiotic-Resistant Bacteria

Bacterial infection is one of main causes that threaten global human health. Especially, antibiotic-resistant bacteria like methicillin-resistant Staphylococcus aureus (MRSA) lead to high mortality rate and more expensive treatment cost. Here, a novel amino-acid-modified conjugated oligomer OTE-d-Phe was synthesized by modifying the side chain of conjugated oligo(thiophene ethynylene) with d-phenylalanine. By mixing 9-fluorenylmethyloxycarbonyl-l-phenylalanin (Fmoc-l-Phe) with OTE-d-Phe, a new and biocompatible low-molecular weight hydrogel (HG-2) was prepared through self-assembly. In solution, HG-2 can effectively capture bacteria spontaneously, such as Escherichia coli and MRSA. Most importantly, the hydrogel has specific and strong antibacterial activity against MRSA over methicillin-susceptible S. aureus, Staphylococcus epidermidis, and E. coli. Interestingly, when the hydrogel was put on a model surface, a piece of cloth, it also is able to selectively kill MRSA with low cell cytotoxicity. The antibacterial mechanism was investigated, and it demonstrated that the HG-2 interacts with and physically breaks the cell wall and membrane, which leads to MRSA death. Therefore, this new conjugated oligomer-based hydrogel provides promising applications in disinfection and therapy of MRSA in hospital and in community.