Surface plasmon resonance Bismuth-modified NH2-UiO-66 with enhanced photocatalytic tetracycline degradation performance

For nearly a century, the misuse of antibiotics has gradually polluted water and threatened human health. Photocatalysis is considered an efficient way to remove antibiotics from water. Zirconium-based metal-organic frameworks have attracted much attention as promising photocatalysts for the degradation of antibiotics. However, single Zirconium-based metal-organic frameworks can still not achieve a more satisfactory photocatalytic efficiency, due to poor light absorption and charge separation efficiency. In this study, a novel metal-loaded metal-organic frameworks material was explored. As a potential photocatalytic material, the performance of NH2-UiO-66 in the photocatalytic degradation of tetracycline was greatly improved just by the loading of a single metal. Bismuth/NH2-UiO-66 photocatalysts of various compositions were physicochemically (TEM, SEM, XRD, XPS, BET, FTIR, UV-VIS, PL), and electrochemically (electrochemical impedance spectroscopy, photocurrent response) characterized. We evaluated the photocatalytic performance of Bismuth/NH2-UiO-66 composites by measuring their ability towards tetracycline decomposition in simulated sunlight irradiation conditions. The experimental results indicated that the introduction of metal Bismuth significantly boosts the photocatalytic activity of the composite catalysts. The final degradation rate of Bismuth/NH2-UiO-66 for tetracycline was found to be 95.8%, namely 2.7 times higher than pure NH2-UiO-66. This behavior is due to the surface plasmon resonance effect of Bismuth, which ameliorates the photocatalyst's electron-hole separation and strengthens the charge transfer. Apart from that, the presence of Bismuth magnifies the visible-light absorption range of Bismuth/NH2-UiO-66. In this study, an innovative approach for designing efficient and cost-effective metal-modified metal-organic frameworks photocatalysts is proposed.

In Situ Formation of Bi2MoO6-Bi2S3 Heterostructure: A Proof-Of-Concept Study for Photoelectrochemical Bioassay of l-Cysteine

A novel signal-increased photoelectrochemical (PEC) biosensor for l-cysteine (L-Cys) was proposed based on the Bi₂MoO₆–Bi₂S₃ heterostructure formed in situ on the indium–tin oxide (ITO) electrode. To fabricate the PEC biosensor, Bi₂MoO₆ nanoparticles were prepared by a hydrothermal method and coated on a bare ITO electrode. When L-Cys existed, Bi₂S₃ was formed in situ on the interface of the Bi₂MoO₆/ITO electrode by a chemical displacement reaction. Under the visible light irradiation, the Bi₂MoO₆–Bi₂S₃/ITO electrode exhibited evident enhancement in photocurrent response compared with the Bi₂MoO₆/ITO electrode, owing to the signal-increased sensing system and the excellent property of the formed Bi₂MoO₆–Bi₂S₃ heterostructure such as the widened light absorption range and efficient separation of photo-induced electron–hole pairs. Under the optimal conditions, the sensor for L-Cys detection has a linear range from 5.0 × 10⁻¹¹ to 1.0 × 10⁻⁴ mol L⁻¹ and a detection limit of 5.0 × 10⁻¹² mol L⁻¹. The recoveries ranging from 90.0% to 110.0% for determining L-Cys in human serum samples validated the applicability of the biosensor. This strategy not only provides a method for L-Cys detection but also broadens the application of the PEC bioanalysis based on in situ formation of photoactive materials.

S-scheme bismuth vanadate and carbon nitride integrating with dual-functional bismuth nanoparticles toward co-efficiently removal formaldehyde under full spectrum light

It is crucial to develop more effective photocatalysts in the field of clean environment. In response, the S-scheme BiVO₄/g-C₃N₄ heterojunction modified by in situ reduced non-noble metal Bi nanoparticles was used to synergistically degrade formaldehyde under full spectral irradiation. The results, that investigated by careful characterizations and density functional theory (DFT) calculations, proved that BiVO₄/g-C₃N₄ form an S-scheme heterojunction, which can effectively improve the separation efficiency of photogenic carriers and maintain the original strong redox capability of semiconductor materials. The SPR effect of Bi elemental substance enhanced the optical response and provided more oxidative species. Thus, the photocatalytic activity of BiVO₄/Bi/g-C₃N₄ was significantly improved through their joint efforts, that the degradation efficiency of HCHO (800 ppm) for 6 h is 96.39% under 300 W Xenon lamp without filter with the pseudo-second-order rate constant of 4.16 ppm^-1·h^-1 and CO₂ selectivity of 98.41%. Surprisingly, the degradation efficiency also reached to 49.35% and 32.23% under visible and near-infrared light irradiation, respectively. Moreover, we also tested its photocatalytic decomposition effect on formaldehyde in coatings, indicating that it has a broad prospect in future coatings applications. This study may provide an expected photocatalyst, an efficient non-noble metal modified S-scheme heterojunction, to degrade volatile organic gases under a broad spectrum light.

Convenient conversion of hazardous nitrobenzene derivatives to aniline analogues by Ag nanoparticles, stabilized on a naturally magnetic pumice/chitosan substrate

Herein, silver nanoparticles (Ag NPs), as an effective catalyst for the reduction process of nitrobenzene derivatives to non-hazardous and useful aniline derivatives, are conveniently synthesized on an inherently magnetic substrate. For this purpose, an efficient combination of volcanic pumice (VP), which is an extremely porous igneous rock, and a chitosan (CTS) polymeric network is prepared and suitably used for the stabilization of the Ag NPs. High magnetic properties of the fabricated Ag@VP/CTS composite, which have been confirmed via vibrating-sample magnetometer (VSM) analysis, are the first and foremost advantage of the introduced catalytic system since it gives us the opportunity to easily separate the particles and perform purification processes. Briefly, higher yields were obtained in the reduction reactions of nitrobenzenes (NBs) under very mild conditions in a short reaction time. Also, along with the natural biocompatible ingredients (VP and CTS) in the structure, excellent recyclability has been observed for the fabricated Ag@VP/CTS catalytic system, which convinces us to do scaling-up and suggests the presented system can be used for industrial applications.

Enhanced photocatalytic activity of Ag/Ag2Ta4O11/g-C3N4 under wide-spectrum-light irradiation: H2 evolution from water reduction without co-catalyst

Designing a superior and stable catalyst toward H₂ evolution under solar light to solve the energy crisis has attracted wide concern. Herein, we have constructed a novel heterojunction photocatalyst Ag/Ag₂Ta₄O₁₁/g-C₃N₄ by in situ assembly, which can efficiently split water to generate H₂ by utilizing wide-spectrum-light irradiation. Optimal H₂ production reaches highly to 253.03 μmol g^-1 h^-1 under the simulated solar light. Moreover, the catalyst presented well stability by the retained 98% photocatalytic activity and invariable textural structure after five recycling tests. The mechanism of H₂ generation over the prepared material was carefully investigated through scanning electron microscope (SEM), transmission electron microscopy (TEM), UV-Vis absorption spectra (UV-Vis), photoluminescence analysis (PL), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance spectra (EPR), and several electrochemical measurements. It is proposed that the carriers are efficiently separated through Ag-mediated Z-scheme route in space, retaining their strong redox ability. Ag particles produced by in situ reduction from the component Ag₂Ta₄O₁₁ could devote to the quick electron migration as the bridge center, effective solar light harvesting due to their surface plasmon resonance, and excellent stability by inhibiting their agglomeration and elution. This research offers a new idea for constructing full solid Z-scheme photocatalysts under wide-spectrum-light irradiation.

Synergistic effects of multi-active sites in silver modified Bi°-BiVO4 toward efficient reduction of aromatic nitrobenzene

In this work, we report on the preparation of silver nanoparticles modified bismuth/bismuth vanadate (Bi°-BiVO₄) catalyst with multi-active sites toward efficient reduction of aromatic nitrobenzene, aiming to tailor the synergistic effects of multi-active sites and specify the underlying catalytic mechanism. The as-prepared catalysts were characterized by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray and X-ray photoelectron spectroscopy. It is observed that Ag nanoparticles with diameter of ˜30 nm were anchored evenly on the surface of rod-shaped BiVO₄, which offered multi-active sites to contact with the reactants effectively and transfer interfacial electron to 4-nitrophenol (4-NP) rapidly. The activity factor k of Ag/Bi°-BiVO₄ for 4-NP reduction is estimated to ˜3933.4 min^-1 g^-1, which is much higher than that obtained from pristine BiVO₄ catalyst, Bi° and noble metal Ag nanoparticles. According to the experimental results, the reaction mechanism and reaction path of 4-NP reduction for BiVO₄, Bi and Ag were studied through the density functional theory (DFT) theoretical calculation, which suggested that they exhibit synergistic catalytic effect in the reaction process. This work may provide a feasible foundation for the mechanism research of semiconductor reduction to 4-nitrophenol.

A Z-scheme Bi2MoO6/CdSe-diethylenetriamine heterojunction for enhancing photocatalytic hydrogen production activity under visible light

A novel Bi₂MoO₆/CdSe-diethylenetriamine system shows high visible light photocatalytic H₂ evolution activity and excellent photostability.