Two three-dimensional coordination polymers as fluorescence probes for the detection of nitrobenzene, tetracycline, fluazinam and their application in green pepper

Two coordination polymers (CPs), [Zn5(L)2(phen)5](1) and [Cd2(HL)(2,2-bpy)(H2O)3](2), were synthesized by using 2',3,3',5,5'-Diphenyl ether pentacarboxylic acid (H5L), phenanthroline (phen), and 2,2'-bipyridine (2,2'-bpy) under hydrothermal conditions. The L5- ligand adopts the μ6-к2: к2: к1: к1: к1: к1 mode in 1 and the μ5-к2: к2: к2: к2: к1 mode in 2. Sensing experiments show that 1 and 2 are fluorescence probes with high sensitivity and rapid detection of nitro explosives, antibiotics, and pesticides. In order to verify the ability of 2 to detect FLU in actual samples, we performed a spiked recovery experiment in green pepper water. The spiked recoveries were 97.77-101.18 %. Interestingly, because H5L is not completely deprotonated in 2, there is abundant hydrogen bonding, which makes the fluorescence quenching rate higher and the detection limit lower. The possible fluorescence quenching mechanism of 1 and 2 can be explained by their UV-VIS absorption spectra and orbital energy levels.

The fabrication of a hybrid fluorescent nanosensing system and its practical applications via film kits for the selective determination of mercury ions

Heavy metal ions especially mercury exposure have severe toxic effects on living organisms and human health. Therefore, easy, accessible, and accurate determination strategies for the selective specification of mercury ions are essential for numerous disciplines. In the presented paper, new hybrid fluorescent iron oxide nanoparticles labeled with carbazole and triazole units (CT-IONP) were prepared via surface modification for the spectrofluorimetric determination of Hg2+ in environmental samples. The structure of the new sensing system is characterized via various spectroscopic, thermal, and microscopic techniques. Under optimized conditions, the hybrid system is not only used in fully water media but also highly fluorescent which led to the "turn-off" response towards Hg2+ ion in the presence of various competitive species. The presented sensing system was successfully used for the determination of Hg2+ ions in the wide linear working range (0.02-10.00 µmol.L-1) at nanomolar levels, where the limit of detection and quantification were calculated as 7.38 and 22.14 nmol.L-1. Importantly, the practical application of hybrid material was applied by CT-IONP embedded polycaprolactone (PCL) polymer film kits. The bluish color of fabricated film kits was instantly and dramatically turned colorless-dark patterns after the addition of Hg2+ ions, which resulted in convenient and rapid film test kits for selective detection.

Fluorescent chemosensors facilitate the visualization of plant health and their living environment in sustainable agriculture

Globally, 91% of plant production encounters diverse environmental stresses that adversely affect their growth, leading to severe yield losses of 50-60%. In this case, monitoring the connection between the environment and plant health can balance population demands with environmental protection and resource distribution. Fluorescent chemosensors have shown great progress in monitoring the health and environment of plants due to their high sensitivity and biocompatibility. However, to date, no comprehensive analysis and systematic summary of fluorescent chemosensors used in monitoring the correlation between plant health and their environment have been reported. Thus, herein, we summarize the current fluorescent chemosensors ranging from their design strategies to applications in monitoring plant-environment interaction processes. First, we highlight the types of fluorescent chemosensors with design strategies to resolve the bottlenecks encountered in monitoring the health and living environment of plants. In addition, the applications of fluorescent small-molecule, nano and supramolecular chemosensors in the visualization of the health and living environment of plants are discussed. Finally, the major challenges and perspectives in this field are presented. This work will provide guidance for the design of efficient fluorescent chemosensors to monitor plant health, and then promote sustainable agricultural development.

A Zn(II) Coordination Polymer for Fluorescent Turn-Off Selective Sensing of Heavy Metal Cation and Toxic Inorganic Anions

A novel coordination polymer [Zn(atyha)2]n (1) (Hatyha = 2-(2-aminothiazole-4-yl)-2- hydroxyiminoacetic acid) was constructed by hydrothermal reaction of Zn2+ with Hatyha ligand. CP 1 exhibits a 2D (4,4)-connected topological framework with Schläfli symbol of {44·62}, where atyha- anions serve as tridentate ligands, bridging with Zn2+ through carboxylate, thiazole and oxime groups. CP 1 displays a strong ligand-based photoluminescence at 390 nm in the solid state, and remains significantly structurally stable in water. Interestingly, it can be utilized as a fluorescent probe for selective and sensitive sensing of Fe3+, Cr2O72- and MnO4- through the fluorescent turn-off effect with limit of detection (LOD) of 3.66 × 10-6, 2.38 × 10-5 and 2.94 × 10-6 M, respectively. Moreover, the efficient recyclability for detection of Fe3+ and Cr2O72- is better than that for MnO4-. The mechanisms of fluorescent quenching involve reversible overlap of UV-Vis absorption bands of the analytes (Fe3+, Cr2O72- and MnO4-) with fluorescence excitation and emission bands for CP 1, respectively.

Selective identification of p-nitroaniline by bromine-mediated polarization of carbon dots

A fluorometric method based on boron, bromide-codoped carbon dots (BBCNs) was developed for the first time for the highly selective detection of p-nitroaniline (PNA) in wastewater samples. It should be noted that the introduction of bromine greatly increases the molecular polarizability of the probe, which can regulate the energy level matching between the probe and PNA, resulting in the interaction between BBCNs and PNA. In the presence of PNA, the fluorescence of BBCNs is obviously quenched and accompanied by a red shift of the fluorescence band, which might be attributed to the formation of aggregates caused by the polar adsorption of BBCNs and PNA. It is beneficial for constructing a highly selective sensing platform for PNA determination compared to its isomers (o-nitroaniline and m-nitroaniline) through atomic bromine-mediated polarization of the BBCNs. With the help of this mechanism, an excellent linear range of 0.5-300 μM with a low detection limit of 0.24 μM toward PNA was obtained. This work further confirms that there is a significant relationship between the nature of doping elements and the optical and physicochemical properties of fluorescent materials.

Rapid and sensitive detection of tetracycline residue in food samples using Cr(III)-MOF fluorescent sensor

As tetracycline antibiotics were used in the poultry sector, their residue in edible animal products may adversely affect food safety and human health. The development of selective and sensitive tetracycline sensors has garnered a lot of interest due to the complexity of food samples. Therefore, a fluorescent sensing probe based on chromium(III)-metal-organic framework was developed for the rapid detection of tetracycline. After the addition of tetracycline, blue emission at λem 410 nm was effectively quenched by the interaction between TC and Cr(III)-metal-organic framework material. Under optimized conditions (sensor concentration: 30 mg/L and pH: 10.0), the sensing probe showed a fast response time (1 min), and low detection limit (0.78 ng/mL) with a linear range (5-45 ng/mL). Interestingly, the Cr(III)-metal-organic framework was successfully applied to quantity tetracycline residue in chicken meat and egg samples with recoveries of 95.17-06.93%. To deduce, our work can provide a new strategy for the direct detection of tetracycline in food samples.

Insight into the Structure of MOF-Containing Hybrid Polymeric Microspheres

Polymer science exploited metal organic frameworks (MOFs) for various purposes, which is due to the fact that these materials are ideal platforms for identifying design features for advanced functional materials. The mechanism of polymerization using MOFs, is still largely unexplored and the detailed characterization of both materials in essential to understand the important interactions between the components. In this work modern advanced research methods were used to investigate the properties of MOF-containing hybrid polymeric microspheres. Hydrothermal conversion of CFA-derived iron particles was used to obtain MOF nanostructures, which were then introduced to the structure of hybrid polymer microspheres based on ethylene glycol dimethylacrylate (EGDMA) and triethoxyvinylsilane (TEVS). Chemical structures were confirmed by ATR-FTIR method. To provide information about the elemental composition of the tested materials and for the determination of chemical bonds present in the tested samples XPS method was applied. Morphology was studied using SEM microscopy, whereas porosity was investigated using ASAP technique. Swellability coefficients were determined using typical organic solvents and distilled water. Moreover, the ecological aspect concerning the use of fly ashes deserves to be emphasized.

Heterometallic ZnHoMOF as a Dual-Responsive Luminescence Sensor for Efficient Detection of Hippuric Acid Biomarker and Nitrofuran Antibiotics

Developing efficient and sensitive MOF-based luminescence sensors for bioactive molecule detection is of great significance and remains a challenge. Benefiting from favorable chemical and thermal stability, as well as excellent luminescence performance, a porous Zn(II)Ho(III) heterometallic-organic framework (ZnHoMOF) was selected here as a bifunctional luminescence sensor for the early diagnosis of a toluene exposure biomarker of hippuric acid (HA) through "turn-on" luminescence enhancing response and the daily monitoring of NFT/NFZ antibiotics through "turn-off" quenching effects in aqueous media with high sensitivity, acceptable selectivity, good anti-interference, exceptional recyclability performance, and low detection limits (LODs) of 0.7 ppm for HA, 0.04 ppm for NFT, and 0.05 ppm for NFZ. Moreover, the developed sensor was employed to quantify HA in diluted urine samples and NFT/NFZ in natural river water with satisfactory results. In addition, the sensing mechanisms of ZnHoMOF as a dual-response chemosensor in efficient detection of HA and NFT/NFZ antibiotics were conducted from the view of photo-induced electron transfer (PET), as well as inner filter effects (IFEs), with the help of time-dependent density functional theory (TD-DFT) and spectral overlap experiments.

Zinc(II)-Based Ring-and-Rod Coordination Layer as an Excitation-Wavelength-dependent Dual-Emissive Chemosensor for Discriminating Fe3+, Cr3+, and Al3+ in Water

The reactions of Zn(NO3)2, 3,6-bis(pyridin-3-yl)-9H-carbazole (bpycz), and 2,5-dihydroxyterephthalic acid (H4dhbdc) or 2-bromoterephthalic acid (Br-1,4-H2bdc) under hydro(solvo)thermal conditions yielded corresponding coordination polymers (CPs) {[Zn(H2dhbdc)(bpycz)]•0.5H2O}n (1) and [Zn(Br-1,4-bdc)(bpycz)]•2DMAc•H2O (2), respectively, with high thermal stability approaching 350 °C. CP 1 adopts a ring-and-rod layer structure, which is topologically described as a 4-connected net with the point symbol of 2•65. Two layers are interpenetrated in parallel interlocking mode to form a double 2D → 2D polyrotaxane entanglement with extra-framework void space of 19.6%. CP 2 has a non-interpenetrating ring-and-rod layer structure of 4-connected 2•65 net topology, with extra-framework void space of 16.6%. Thermally activated 1 and 2 revealed CO2 uptakes of 101.1 and 98.6 cm3 g-1, respectively, at P/P0 = 1 and 195 K. X-ray powder diffraction (XRPD) patterns confirmed that 1 and 2 both possessed high chemical stability in H2O, CH3OH, acetone, and DMF, and framework stability during gas adsorption-desorption. The H2O suspension of 1 displayed excitation-dependent dual-emissive properties, appearing at 432 nm upon excitation at 300 nm and at 528 nm upon excitation at 365 nm. Of note, 1 was capable of detection of Fe3+, Cr3+, and Al3+ ions in H2O, showing good anti-interference ability, excellent selectivity, and high sensitivity. More interesting, the dual-emissive properties make 1 to be an excellent luminescence chemosensor to screen Fe3+, Cr3+, and Al3+ from a pool of metal ions in H2O upon excitation at 300 nm via luminescence quenching effect and then discriminate Fe3+, Cr3+, and Al3+ upon excitation at 365 nm via luminescence quenching, unaltered, and enhancement responses, respectively. On the other hand, the H2O suspension of 2 demonstrated an excitation-independent emission appearing at around 430 nm, which could be utilized to sensitively detect Fe3+ and Cr3+ ions with good anti-interference ability and excellent selectivity via luminescence quenching effect. Further, 1 and 2 were recyclability and possessed cycling stability. The plausible sensing mechanisms for 1 and 2 toward Fe3+, Cr3+, and Al3+ were also explored in detail.

A Chiral Metal-Organic Framework Prepared on Large-Scale for Sensitive and Enantioselective Fluorescence Recognition

MOF-based luminescent sensors have garnered considerable attention due to their potential in recognition and discrimination with high sensitivity, selectivity, and fast response in the last decades. Herein, this work describes the bulk preparation of a novel luminescent homochiral MOF, namely, [Cd(s-L)](NO₃)₂ (MOF-1), from an enantiopure pyridyl-functionalized ligand with rigid binaphthol skeleton under mild synthetic condition. Except for the features of porosity and crystallinity, the MOF-1 has also been characterized with water-stability, luminescence, and homochirality. Most important, the MOF-1 exhibits highly sensitive molecular recognition toward the4-nitrobenzoic acid (NBC) and moderate enantioselective detection of proline, arginine, and 1-phenylethanol.

SO2 capture and detection using a Cu(II)-metal-organic polyhedron

The SO₂ adsorption-desorption capacity at room temperature and 1 bar of the metal-organic polyhedron MOP-CDC was investigated. In addition, the qualitative solid-state absorption-emission properties of this material (before and after SO₂ exposure) were measured and tested, and it demonstrated remarkable capability for SO₂ detection. Our results represent the first example of fluorimetric SO₂ detection in a MOP.

Combined Skeleton and Spatial Rigidification of AIEgens in 2D Covalent Organic Frameworks for Boosted Fluorescence Emission and Sensing of Antibiotics

AIEgens show relatively weak fluorescence performance owing to the existence of π-π interlayer accumulation, molecular layer planarization, and intramolecular rotation in aggregation-induced emission (AIE) molecules, which limit its application scope. Herein, we put forward a combined skeleton and spatial rigidification method to boost the fluorescence emission efficiency of AIEgens. As a proof-of-concept experiment, two highly fluorescent covalent organic frameworks (COFs) were designed and constructed by the Knoevenagel condensation reaction. The experimental results show that the combined skeleton and spatial rigidification endowed excellent fluorescence emission for the resulting F-COF-2 by destruction of the π-π interlayer accumulation, interference of the molecular layer planarization, and restriction of the intramolecular rotation of the AIEgen unit. F-COF-2 displayed highly sensitive and selective NFT and NZF detection. Particularly, the K_sv value and limit of detection of F-COF-2 toward NFT were estimated to be 9.12 × 10⁵ M^-1 and 3.35 ppb, respectively, which surpassed all the reported crystalline porous fluorescent materials. The mechanism study proved that its outstanding fluorescence detection property was ascribed to the formation of a nonfluorescent complex induced by hydrogen bond interactions and electron transfer between F-COF-2 and NFT and NZF. This work not only proposes a combined skeleton and spatial rigidification strategy to improve the fluorescence efficiency of AIE molecules but also develops a sensor with high fluorescence efficiency, high chemical stability, and highly efficient detection of antibiotics.

A cucurbit[6]uril based supramolecular assembly for the detection and removal of dyes and antibiotics from water

A cucurbit[6]uril (CB[6]) based supramolecular assembly CB[6]-[NDS]^2- (1, NDS = 2,6-naphthalenedisulfonic acid anion) was used to detect dyes such as reactive blue 19 (RB19), rhodamine B (RB), methyl orange (MO), methyl red (MR), and methyl violet (MV), and isoquinoline antibiotics such as berberine (BER) and palmatine (PAL) with detection limits of 143, 128, 374, 193, 305, 27 and 34 ppb, respectively. Simultaneously, 1 also displayed high adsorption abilities towards these organic molecules. These results indicate that 1 is a favorable material for the simultaneous selective detection and removal of specific dyes and antibiotics from water, being potentially useful in monitoring water quality and treating wastewater. The possible mechanisms of the detection and adsorption are also proposed.

A Dihydrotetrazine-Functionalized Metal-Organic Framework as a Highly Selective Luminescent Host-Guest Sensor for Detection of 2,4,6-Trinitrophenol

Pore decoration of metal-organic frameworks (MOFs) with functional groups is a useful strategy to attain high selectivity toward specific analytes, especially in the presence of interfering molecules with similar structures and energy levels, through selective host-guest interactions. In this work, we applied a dihydrotetrazine-decorated MOF, TMU-34, with the formula [Zn(OBA)(H₂DPT)_0.5]_n·DMF, where H₂OBA is 4,4'-oxybis(benzoic acid) and H₂DPT is 3,6-bis(pyridin-4-yl)-1,4-dihydro-1,2,4,5-tetrazine, for the highly selective detection of phenolic NACs, especially TNP (94% quenching efficiency, detection limit 8.1 × 10^-6 M, K_SV = 182663 mol L^-1), in the presence of other substituted NACs especially -NH₂-substituted NACs. Investigations reveal that the quenching mechanism is dominated by photoinduced MOF-to-TNP electron transfer through possible hydrogen-bonding interactions between the phenolic hydroxyl group of TNP and dihydrotetrazine functions of TMU-34. Despite extensive publications on the detection of TNP in the presence of other NACs, the significance of this work will be elucidated if attention is paid to the fact that TMU-34 is among the rare and highly selective MOF-based TNP sensors in the presence of -NH₂-substituted NACs as the serious interferers.

Metal-Organic Frameworks in Agriculture

Agrochemicals, which are crucial to meet the world food qualitative and quantitative demand, are compounds used to kill pests (insects, fungi, rodents, or unwanted plants). Regrettably, there are some important issues associated with their widespread and extensive use (e.g., contamination, bioaccumulation, and development of pest resistance); thus, a reduced and more controlled use of agrochemicals and thorough detection in food, water, soil, and fields are necessary. In this regard, the development of new functional materials for the efficient application, detection, and removal of agrochemicals is a priority. Metal-organic frameworks (MOFs) with exceptional sorptive, recognition capabilities, and catalytical properties have very recently shown their potential in agriculture. This Review emphasizes the recent advances in the use of MOFs in agriculture through three main views: environmental remediation, controlled agrochemical release, and detection of agrochemicals.

Exploring multifunctional behaviour of g-C3N4 decorated BiVO4/Ag2CO3 hierarchical nanocomposite for simultaneous electrochemical detection of two nitroaromatic compounds and water splitting applications

Development of multifunctional ternary nanocomposite based electrocatalysts for detection of toxic elements and generation of renewable energy describes an environmentally sustainable technique to address the dual challenges of pollution and energy. Herein, we adopted microwave-assisted synthesis to design a multifunctional graphitic carbon nitride (g-C₃N₄) decorated BiVO₄/Ag₂CO₃ (BVG@C) hierarchical ternary nanocomposite for sensing and water splitting applications. The morphological, structural and elemental characterizations demonstrate the successful decoration of carbon nitride on the composite surface. The electrochemical activity of BVG@C modified glassy carbon electrode reveals excellent redox behaviour towards simultaneous detection of 4-Nitrophenol (4-NP) and 4-Nitroaniline (PNA). The modified electrode shows rapid amperometric current response with high sensitivity of 2.368 μA mM cm^-2 and 1.534 mA mM cm^-2 and low detection limit of 0.012 μmol L^-1and 0.028 μmol L^-1, respectively for 4-NP and PNA. Moreover, the modified electrode was further investigated for hydrogen evolution and oxygen evolution reactions and the electrocatalytic results show admirable activity and good stability for oxygen evolution with very low overpotential of 136 mV in alkaline medium. It is worthwhile to mention that the excellent activity of electrocatalyst can be ascribed to the decoration and electronic interaction of g-C₃N₄ with the BiVO₄/Ag₂CO₃ nanocomposite, increasing its surface area, active sites, charge transfer and decreasing resistance.

Non-biological fluorescent chemosensors for pesticides detection

The ongoing poisoning of agricultural products has pushed the security problem to become an important issue. Among them, exceeding the standard rate of pesticide residues is the main factor influencing the quality and security of agricultural products. Moreover, the abuse of pesticides has introduced a large amount of residues in soil and drinking water, which will enter the food chain to the human body, leading to neurological disorders and cancer. Therefore, great efforts have been devoted to developing fluorescent sensors for detecting pesticide in a facile, quickly, sensitive, selective, accurate manner, which exhibit greater advantages than some traditional methods. In this review, we mainly focus on summarizing the non-biological fluorescent probes for organic pesticides detection with the detection limit of micromole to nanomole, including organic functional small molecules, calixarenes and pillararenes, metal organic framework systems, and nanomaterials. Meanwhile, we described the different sensing mechanisms for pesticides detection of these mentioned fluorescent sensors, the detection limit of each pesticide, the application in detecting actual samples, as well as their respective advantages and development prospects associated with present non-biological fluorescent sensors.

A water-stable Zn4O-based MOF decorated with carbazolyl chromophores for multi-responsive fluorescence sensing of Fe3+, Cr2O72− and nitro-compounds

A MOF with strong deep blue light emission and high quantum efficiency has high selectivity and sensitivity for detecting 2,6-dichloro-4-nitroaniline.

Rapid and reliable triple-emissive detection of 2,6-dichloro-4-nitroaniline as a pesticide based on a high-nuclear Cd(ii)–Sm(iii) nanocluster

A 56-metal Cd(ii)–Sm(iii) nanocluster (molecular sizes: 4.5 × 2.7 × 2.7 nm) was constructed for the rapid and reliable triple-emissive detection of 2,6-dichloro-4-nitroaniline (DCN) as a pesticide.

ESIPT Active Assemblies for 'On-On' Detection, Cell Imaging and Hampering Cellular Activity of 2, 6-dichloro-4-nitroaniline

NIR-emissive ESIPT active PBI-keto/enol assemblies have been developed for the detection of 2, 6-dichloro-4-nitroaniline (DCN). These assemblies show 'on-on' optical response towards DCN due to combined ESIPT-AIEE phenomenon with a detection limit of 1.65 nM. The potential of PBI-keto/enol assemblies to detect DCN has also been explored in grapes juice/grape residue, and soil for six consecutive days. Further, the biological applications of PBI-keto/enol assemblies to detect DCN in blood serum and to image DCN in live cells and to restrict the DCN induced cell death has been demonstrated in MG-63 cell lines.

Fabrication of a 2D metal-organic framework (MOF) nanosheet colloidal system and investigation of its fluorescence response to pesticide molecules

Pesticides, as a type of toxic chemicals widely used for a long time, not only pollute the environment but also affect people's health and cause serious harm to the human body, soil and environment. Therefore, it is very necessary to exploit a portable and environmentally friendly method to detect pesticides with high sensitivity. Herein, a new luminescent metal-organic framework ([Zn(TPYBDC)·H₂O]_n, TPYBDC^2- = 4'-(pyridin-4-yl)-[2,2':6',2''-terpyridine]-4,4''-dicarboxylate) with 2D coordination layers has been designed and assembled using 4'-(pyridin-4-yl)-[2,2':6',2''-terpyridine]-4,4''-dicarboxylic acid as the ligand. The as-synthesized Zn-LMOF was exfoliated to ultrathin 2D nanosheets (4-5 nm) to form a luminescence colloidal sensor by destroying the weak interaction between the coordination layers such as H-bonding between the matrix H₂O and the coordination carboxyl oxygen, and the π-π interactions among the interlayer conjugated aromatic rings. Investigation of its recognition and detection ability towards chemical pesticides shows that it can sensitively detect pesticides such as imidacloprid, nitenpyram and dinotefuran via fluorescence quenching effect with very low detection limit (LOD). Using imidacloprid as a typical case, a LOD value of 0.562 μM and recoveries for the simulated agricultural environmental samples in the range of 94-115% suggests that the as-fabricated 2D Zn-MOF nanosheet colloidal sensor (Zn-LMOF probe) is a most promising candidate for sensing chemical pesticides.

TMSOTf-Mediated Formal [4 + 2] Cycloaddition-Retro-aza-Michael Cascade of Vinylogous Carbamates for the Synthesis of Highly Fluorescent Pyridocarbazoles

Trimethylsilyl trifluoromethanesulfonate mediated dimerization reaction of vinylogous carbamates of carbazoles gave highly fluorescent pyridocarbazoles through a Povarov-type formal [4 + 2] cycloaddition-retro-aza-Michael cascade. The developed strategy was used to access indolo pyridocarbazole and quinolizinocarbazolone in an expeditious manner. Various coupling reactions were successfully performed on synthesized pyridocarbazoles to study the effect of electronics of substitution on photophysical properties. Synthesized carbazoles possess excellent photophysical properties with high quantum yields (Φ_F). Fluorescent carbazole dicarboxylic acid showed potential as a pH probe to give a linear response to pH over a very wide range (7.0-3.0) reflecting high efficiency.

Cinnamal Sensing and Luminescence Color Tuning in a Series of Rare-Earth Metal-Organic Frameworks with Trans-1,4-cyclohexanedicarboxylate

Three isostructural metal-organic frameworks ([Ln2(phen)2(NO3)2(chdc)2]·2DMF (Ln3+ = Y3+ for 1, Eu3+ for 2 or Tb3+ for 3; phen = 1,10-phenanthroline; H2chdc = trans-1,4-cyclohexanedicarboxylic acid) were synthesized and characterized. The compounds are based on a binuclear block {M2(phen)2(NO3)2(OOCR)4} assembled into a two-dime nsional square-grid network containing tetragonal channels with 26% total solvent-accessible volume. Yttrium (1)-, europium (2)- and terbium (3)-based structures emit in the blue, red and green regions, respectively, representing the basic colors of the standard RGB matrix. A doping of Eu3+ and/or Tb3+ centers into the Y3+-based phase led to mixed-metal compositions with tunable emission color and high quantum yields (QY) up to 84%. The bright luminescence of a suspension of microcrystalline 3 in DMF (QY = 78%) is effectively quenched by diluted cinnamaldehyde (cinnamal) solutions at millimolar concentrations, suggesting a convenient and analytically viable sensing method for this important chemical.

Recent advances in biosensors for antibiotic detection: Selectivity and signal amplification with nanomaterials

Antibiotics are widely used in the prevention and treatment of infectious diseases in animals due to its bactericidal or bacteriostatic action. Residual antibiotics and their metabolites pose great threats to human and animal health, such as potential carcinogenic and mutagenic effects, and bacterial resistances. Therefore, it is necessary and urgent to accurately monitor trace amounts of antibiotics in food samples. Up to now, many analytical methods have been reported for the determination of antibiotics. Biosensors with the advantages of high sensitivity, rapid response, easy miniaturization, and low price have been widely applied to the detection of antibiotics residues in past decades. This review offered an in-depth evaluation of recognition elements for antibiotic residues in diverse food matrices. In addition, it presented a systematical and critical review on signal amplification via various materials, focusing on recently developed nanomaterials. Finally, the review provided an outlook on the future concepts to help upgrade the sensing techniques for antibiotics in food.

A fourfold interpenetrating three-dimensional cadmium(II) coordination polymer: synthesis, crystal structure and physical properties

A novel three-dimensional Cd^II coordination framework, namely, poly[{μ-bis[4-(2-methylimidazol-1-yl)phenyl] ether-κ²N³:N^3'}(μ-naphthalene-1,4-dicarboxylato-κ³O¹:O⁴,O^4')cadmium(II)], [Cd(C₁₂H₆O₄)(C₂₀H₁₈N₄O)]_n or [Cd(1,4-NDC)(BMIOPE)]_n, where 1,4-H₂NDC is naphthalene-1,4-dicarboxylic acid and BMIOPE is bis[4-(2-methylimidazol-1-yl)phenyl] ether, has been prepared and characterized by single-crystal X-ray diffraction, elemental analysis, IR spectroscopy and thermogravimetric analysis. The compound displays a novel fourfold interpenetrating diamond-like network. In addition, it not only shows a strong fluorescence emission in the solid state, but also exhibits excellent photocatalytic activity for the degradation of methylene blue (MB) at room temperature.

Efficient chemosensors for toxic pollutants based on photoluminescent Zn(ii) and Cd(ii) metal-organic networks

Optical sensors with high sensitivity and selectivity, as important analytical tools for chemical and environmental research, can be realized by straightforward synthesis of luminescent one-, two- and three-dimensional Zn(ii) and Cd(ii) crystalline coordination arrays (CPs and MOFs). In these materials with emission centers typically based on charge transfer and intraligand emissions, the quantitative detection of specific analytes, as pesticides or anions, is probed by monitoring real-time changes in their photoluminescence and color emission properties. Pesticides/herbicides have extensive uses in agriculture and household applications. Also, a large amount of metal salts of cyanide is widely used in several industrial processes such as mining and plastic manufacturing. Acute or chronic exposure to these compounds can produce high levels of toxicity in humans, animals and plants. Due to environmental concerns associated with the accumulation of these noxious species in food products and water supplies, there is an urgent and growing need to develop direct, fast, accurate and low-cost sensing methodologies. In this critical frontier, we discuss the effective strategies, chemical stability, luminescence properties, sensitivity and selectivity of recently developed hybrid Zn(ii)/Cd(ii)-organic materials with analytical applications in the direct sensing of pesticides, herbicides and cyanide ions in the aqueous phase and organic solvents.

Phenolic nitroaromatics detection by fluorinated metal-organic frameworks: Barrier elimination for selective sensing of specific group of nitroaromatics

Many piesce of research have been performed to detect nitroaromatic-compounds (NACs) by metal-organic frameworks (MOFs). Despite extensive studies, there are still significant challenges like selective detection of specific NAC group in presence of other NACs. Here, we have integrated two functionalization strategies through decoration of pore-walls of the MOFs with trifluoromethyl groups and extension in π-conjugated system. Based on this idea, trifluoromethyl TMU-44 (with the formula [Zn₂(hfipbb)₂(L1)]_n.DMF, H₂hfipbb = 4,4'-(hexafluoroisopropylidene) bis(benzoic acid), L1 = N,N'-bis-pyridin-4-ylmethylene-benzene-1,4-diamine) and TMU-45 (with formula [Zn₂(hfipbb)₂(L2)]_n.DMF, L2 = N,N'-bis-pyridin-4-ylmethylene-naphthalene-1,5-diamine) frameworks have been synthesized. The aromatic skeleton of TMU-44 is based on phenyl rings while TMU-45 aromatic skeleton is extended by replacement of phenyl with naphthyl core. Measurements reveal that these MOFs are highly sensitive to phenolic NACs especially 2,4,6-trinitrophenol (TNP) with high quenching efficiency of 90% for TMU-44 (K_SV = 10,652 M^-1, LOD = 6.9 ppm) and 99% for TMU-45 (K_SV = 34,741 M^-1, LOD = 2.07 ppm). The proposed detection mechanism can be associated with hydrogen bonding between OH group of phenolic NACs and trifluoromethyl groups of TMU-MOFs as well as π(rich)∙∙∙π(deficient) interaction between π-conjugated backbone of TMU-frameworks and π-deficient ring of NACs.

Fabrication of a dual-emittingcomposite as a recyclable luminescent sensor for sensitive detection of nitrofuran antibiotics

A novel dual-emittingRhB@Zn-1composite was fabricated by encapsulating RhB into the channels ofZn-1, which can serve as a recyclable sensor for sensitive and selective detection of nitrofuran antibioticsviathe luminescence quenching process.

An exceptionally stable luminescent cadmium(ii) metal–organic framework as a dual-functional chemosensor for detecting Cr(vi) anions and nitro-containing antibiotics in aqueous media

Based on four kinds of SBUs, a robust Cd(ii) LMOF was fabricated that possessed highly sensitive detectability as a dual-response chemosensor for Cr(vi) anions and broad-spectrum nitro-containing antibiotics in aqueous media.

Synthesis of a Eu complex based on benzonitrile hydrolysis as the first luminescent probe for clinafloxacin

[Eu₂(pip)₂(PhCOO)₆] synthesized via hydrolysis of benzonitrile shows specific and quantitative photoluminescence quenching by clinafloxacin.

A luminescent Cd(ii) coordination polymer as a multi-responsive fluorescent sensor for Zn2+, Fe3+ and Cr2O72− in water with fluorescence enhancement or quenching

A luminescent Cd(ii) coordination polymer can act as a multi-responsive sensor for efficiently detecting Zn²⁺, Fe³⁺ and Cr₂O₇²⁻ ions.

Ancillary ligand enabled structural and fluorescence diversity in metal–organic frameworks: application for the ultra-sensitive detection of nitrofuran antibiotics

Fabrication and engineering of two new MOFs with flexible dipyridyl ligands for the fluorescence turn-off detection of antibiotics.