Biochemical and kinetic characterization of laccase and manganese peroxidase from novel Klebsiella pneumoniae strains and their application in bioethanol production

Harnessing the power of bacterial laccases for xenobiotic degradation in water: A 10-year overview

Industrialization and population growth are leading to the production of significant amounts of sewage containing hazardous xenobiotic compounds. These compounds pose a threat to human and animal health, as well as the overall ecosystem. To combat this issue, chemical, physical, and biological techniques have been used to remove these contaminants from water bodies affected by human activity. Biotechnological methods have proven effective in utilizing microorganisms and enzymes, particularly laccases, to address this problem. Laccases possess versatile enzymatic characteristics and have shown promise in degrading different xenobiotic compounds found in municipal, industrial, and medical wastewater. Both free enzymes and crude enzyme extracts have demonstrated success in the biotransformation of these compounds. Despite these advancements, the widespread use of laccases for bioremediation and wastewater treatment faces challenges due to the complex composition, high salt concentration, and extreme pH often present in contaminated media. These factors negatively impact protein stability, recovery, and recycling processes, hindering their large-scale application. These issues can be addressed by focusing on large-scale production, resolving operation problems, and utilizing cutting-edge genetic and protein engineering techniques. Additionally, finding novel sources of laccases, understanding their biochemical properties, enhancing their catalytic activity and thermostability, and improving their production processes are crucial steps towards overcoming these limitations. By doing so, enzyme-based biological degradation processes can be improved, resulting in more efficient removal of xenobiotics from water systems. This review summarizes the latest research on bacterial laccases over the past decade. It covers the advancements in identifying their structures, characterizing their biochemical properties, exploring their modes of action, and discovering their potential applications in the biotransformation and bioremediation of xenobiotic pollutants commonly present in water sources.

Biotransformation of 2,4,6-Trinitrotoluene by a cocktail of native laccases from Pycnoporus sanguineus CS43 under oxygenic and non-oxygenic atmospheres

2,4,6-Trinitrotoluene (TNT) is a highly toxic nitroaromatic explosive known for its environmental consequences, contaminating soil and groundwater throughout its life cycle, from production to disposal. Therefore, the urgency of developing innovative and ecological strategies to remedy the affected areas is recognized. This study reports, for the first time, the enzymatic biotransformation of TNT by a cocktail of native laccases from Pycnoporus sanguineus CS43. The laccases displayed efficient TNT conversion under both oxygenic and non-oxygenic conditions, achieving biotransformation rates of 80% and 87% within 48 h at a temperature of 60 °C and pH 7. Preliminary kinetic constants were calculated with the laccase cocktail, being a Vmax of 1.133 μM min-1 and 0.2984 μM min-1, and the Km values were 1586 μM and 458 μM, in an oxygenic and non-oxygenic atmosphere, respectively. High-performance liquid chromatography-mass spectrometry (HPLC/MS) confirmed the formation of amino dinitrotoluene isomers and hydroxylamine isomers as biotransformation products. In summary, this study suggests the potential application of laccases for the direct biotransformation of recalcitrant compounds like TNT, offering an environmentally friendly approach to address contamination issues.

Recent advances in laccase activity assays: A crucial challenge for applications on complex substrates

Despite being one of the first enzymes discovered in 1883, the determination of laccase activity remains a scientific challenge, and a barrier to the full use of laccase as a biocatalyst. Indeed, laccase, an oxidase of the blue multi-copper oxidases family, has a wide range of substrates including substituted phenols, aromatic amines and lignin-related compounds. Its one-electron mechanism requires only oxygen and releases water as a reaction product. These characteristics make laccase a biocatalyst of interest in many fields of applications including pulp and paper industry, biorefineries, food, textile, and pharmaceutical industries. But to fully envisage the use of laccase at an industrial scale, its activity must be reliably quantifiable on complex substrates and in complex matrices. This review aims to describe current and emerging methods for laccase activity assays and place them in the context of a potential industrial use of the enzyme.

Deciphering ligninolytic enzymes in the secretome of Pycnoporus sp. and their potential in degradation of 2-chlorophenol

Chlorophenols and their derivatives are persistent environmental pollutants, posing a threat to terrestrial and aquatic life. The biological approach for eliminating toxic contaminants is an effective, sustainable, and environmental friendly method. In this study, the crude enzymes present in the secretome of white-rot fungus (Pycnoporus sp.) were explored for the degradation of 2-chlorophenol. The activity of ligninolytic enzymes in the secretome was analyzed and characterized for their kinetics and thermodynamic properties. Laccase and manganese peroxidase were prevalent ligninolytic enzymes and exhibited temperature stability in the range of 50-65 °C and pH 4-5, respectively. The kinetic parameters Michaelis constant (Km) and turnover number (Kcat) for Lac were 42.54 μM and 45 s-1 for 2,2'-azino-bis (3-ethylben- zothiazoline-6-sulfonic acid), and 93.56 μM and 48 s-1 towards 2,6-dimethoxyphenol whereas Km and Kcat for MnP were 2039 μM and 294 s-1 for guaiacol as substrate. Treatment with the crude enzymes laccase and manganese peroxidase results in the reduction of 2-chlorophenol concentration, confirmed by UV-visible absorption spectra and high-performance liquid chromatography analysis. The detoxification of 2-chlorophenol into less toxic forms was confirmed by the plate toxicity assay. This study demonstrated that crude enzymes produced by Pycnoporus sp. could potentially minimize the toxicity of phenolic compounds in a sustainable way.

Manganese peroxidases as robust biocatalytic tool - An overview of sources, immobilization, and biotechnological applications

With robust catalytic features, manganese peroxidases (MnPs) from various sources, including fungi and bacteria, have gained much consideration in many biotechnological applications with particular emphasis on environmental remediation. MnP is a heme-containing enzyme that belongs to the oxidoreductases that can catalyze the degradation of various organic pollutants, such as chlorophenols, nitroaromatic compounds, industrial dyes, and polycyclic aromatic hydrocarbons. To spotlight the MnP as biocatalytic tool, an effort has been put forward to cover the four major compartments. For instance, following a brief introduction, first, various microbial sources of MnP are discussed with examples. Second, structural attributes and biocatalytic features of MnP are given with examples. Third, different MnP immobilization strategies, including adsorption, covalent linking, entrapment, and cross-linking, are discussed with a significant motive to strengthen the enzyme's stability against diverse deactivation agents by restricting the conformational mobility of molecules. Compared to free counterparts, immobilized MnP fractions perform well in hostile environments. Finally, various biotechnological applications, such as fuel ethanol production, de-lignification, textile industry, pulp and paper industry, degradation of phenolic and non-phenolic compounds, and pharmaceutical and pesticide degradation, are briefly discussed.

Deciphering the alkaline stable mechanism of bacterial laccase from Bacillus pumilus by molecular dynamics simulation can improve the decolorization of textile dyes

Laccases are considered promising tools for removing synthetic dyes from textile and tannery effluents. However, the alkaline pH in the effluents causes laccase instability, inactivation, and difficulty in its bioremediation. Based on a Bacillus pumilus ZB1 (BpLac) derived alkaline stable laccase, this study aimed to elucidate its alkaline stable mechanism at molecular level using molecular dynamics simulation. The effects of metal ions, organic solvents, and inhibitors on BpLac activity were assessed. BpLac formed more salt bridges and negatively charged surface in alkaline environment. Thereafter, pH-induced conformation changes were analyzed using GROMACS at pH 5.0 and 10.0. Among the identified residues with high fluctuation, the distance between Pro359 and Thr414 was stable at pH 10.0 but highly variable at pH 5.0. DSSP analysis suggested that BpLac formed more β-sheet and less coil at pH 10.0. Principal component analysis and free energy landscape indicated that irregular coils formed at pH 5.0 benefit for activity, while rigid α-helix and β-sheet structures formed at pH 10.0 contributed to alkaline stability. Breaking the α-helix near T1 copper center would not reduce alkaline stability but could improve dye decolorization by BpLac. Overall, these findings would advance the potential application of bacterial laccase in alkaline effluent treatment.

Investigations on the Fusants From Wide Cross Between White-Rot Fungi and Saccharomyces cerevisiae Reveal Unknown Lignin Degradation Mechanism

The degradation of lignocellulose by fungi, especially white-rot fungi, contributes a lot to carbon cycle, bio-fuel production, and many other bio-based applications. However, the existing enzymatic and non-enzymatic degradation mechanisms cannot be unequivocally supported by in vitro simulation experiment, meaning that additional mechanisms might exist. Right now, it is still very difficult to discover new mechanisms with traditional forward genetic approaches. To disclose novel lignin degradation mechanisms in white-rot fungi, a series of fusants from wide cross by protoplast fusion between Pleurotus ostreatus, a well-known lignin-degrading fungus, and Saccharomyces cerevisiae, a well-known model organism unable to degrade lignocellulose, was investigated regarding their abilities to degrade lignin. By analyzing the activity of traditional lignin-degrading enzyme, the ability to utilize pure lignin compounds and degrade corn stalk, a fusant D1-P was screened out and proved not to contain well-recognized lignin-degrading enzyme genes by whole-genome sequencing. Further investigation with two-dimension nuclear magnetic resonance (NMR) shows that D1-P was found to be able to degrade the main lignin structure β-O-4 linkage, leading to reduced level of this structure like that of the wild-type strain P. ostreatus after a 30-day semi-solid fermentation. It was also found that D1-P shows a degradation preference to β-O-4 linkage in Aβ(S)-threo. Therefore, wide cross between white-rot fungi and S. cerevisiae provides a powerful tool to uncover novel lignocellulose degradation mechanism that will contribute to green utilization of lignocellulose to produce bio-fuel and related bio-based refinery.

1H-13C heteronuclear single quantum coherence NMR evidence for iodination of natural organic matter influencing organo-iodine mobility in the environment

The complex biogeochemical behavior of iodine (I) isotopes and their interaction with natural organic matter (NOM) pose a challenge for transport models. Here, we present results from iodination experiments with humic acid (HA) and fulvic acid (FA) using ¹H-¹³C heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectroscopy. Even though not a quantitative approach, ¹H-¹³C HSQC NMR corroborated that iodination of NOM occurs primarily through aromatic electrophilic substitution of proton by I, and also revealed how iodination chemically alters HA and FA in a manner that potentially affects the mobility of iodinated NOM in the environment. Three types of iodination experiments were conducted with HA and FA: a) non-enzymatic iodination by IO₃^- (pH 3) and I^- (pH 4 and 7), b) addition of lactoperoxidase to promote I^--iodination in the presence of the co-substrate, H₂O₂ (pH 7), and c) addition of laccase for facilitating I^--iodination in the presence of O₂, with or without a mediator (pH 4). When mediators or H₂O₂ were present, extracellular oxidases and peroxidases enhanced I^- incorporation into NOM by between 54% and 3400%. Iodination of HA, which was less than that of FA, enhanced HA's stability (inferred from increases in aliphatic compounds, decreases in carbohydrate moieties, and thus increased molecular hydrophobicity) yet reduced HA's tendency to incorporate more iodine. As such, HA is expected to act more as a sink for iodine in the environment. In contrast, iodination of FA appeared to generate additional iodine binding sites, which resulted in greater iodine uptake capability and enhanced mobility (inferred from decreases in aliphatic compounds, increases in carbohydrates, and thus decreases in molecular hydrophobicity). These results indicate that certain NOM moieties may enhance while others may inhibit radioiodine mobility in the aqueous environment.

Microbial valorization of lignin: Prospects and challenges

Lignin is the world's second most prevalent biomaterial, but its effective value-added product valorization methods are still being developed. The most common preparation processes for converting lignin to platform chemicals and biofuels are fragmentation and depolymerization. Due to its structural diversity, fragmentation generally produces a variety of products, necessitating tedious separation and purifying methods to isolate the desired products. Bacterial-based techniques are commonly utilized for lignin fragmentation due to their high metabolitic activity. Recent advancements in lignin valorization utilizing bacteria, such as lignin decomposing microbes and major pathways involved that can breakdown lignin into various valuable products namely lipids, furfural, vanillin, polyhydroxybutyrate, poly lactic acid blends were discussed in this review. This review also covers the genetic and fermentation methodologies to enhance lignin decomposition, challenges and future trends of microbe based lignin valorization.

Comparison of performances of different fungal laccases in delignification and detoxification of alkali-pretreated corncob for bioethanol production

The performance of the alkaline fungal laccase PIE5 (pH 8.5) in the delignification and detoxification of alkali-pretreated corncob to produce bioethanol was evaluated and compared with that of the neutral counterpart (rLcc9, 6.5), with the acidic laccase rLacA (4.0) was used as an independent control. Treatment with the three laccases facilitated bioethanol production compared with their respective controls. The lignin contents of alkali-pretreated corncob reduced from 4.06%, 5.06%, and 7.80% to 3.44%, 3.95%, and 5.03%, after PIE5, rLcc9, and rLacA treatment, respectively. However, the performances of the laccases were in the order rLacA > rLcc9 > PIE5 in terms of decreasing total phenol concentration (0.18, 0.36, and 0.67 g/l), boosting ethanol concentration (8.02, 7.51, and 7.31 g/l), and volumetric ethanol productivity (1.34, 0.94, and 0.91 g/l hr), and shortening overall fermentation time. Our results would inform future attempts to improve laccases for ethanol production. Furthermore, based on our data and the fact that additional procedures, such as pH adjustment, are needed during neutral/alkaline fungal laccase treatment, we suggest acidic fungal laccases may be a better choice than neutral/alkaline fungal laccases in bioethanol production.

Effective degradation of tetracycline by manganese peroxidase producing Bacillus velezensis strain Al-Dhabi 140 from Saudi Arabia using fibrous-bed reactor

A tetracycline degrading bacterial strains was characterized from the municipal sludge and detected its ability to produce manganese peroxidase. The molecular weight of manganese peroxidase was determined as 46 kDa after Biogel P-100 gel filtration column chromatography purification. Maximum tetracycline degradation was observed with the manganese peroxidase from the strain Bacillus velezensis Al-Dhabi 140 and the optimum degradation process was studied. Optimization revealed the maximum removal efficacy was obtained as 87 mg/L at initial tetracycline concentration 143.75 mg/L, pH 6.94 and 8.04% inoculum. Consequently, fibrous bed reactor containing the culture of B. velezensis Al-Dhabi 140 in fibrous matrix was formed to transform tetracycline in synthetic wastewater. The transformed product of tetracycline from the fibrous bed reactor was evident by the activity of ligninolytic enzymes produced by B. velezensis Al-Dhabi 140 in reactor. The decreased level of antibacterial potency was obtained after 10 days. The zone of inhibition was 24 ± 1 mm after 1 day and it decreased as 9 ± 1 mm after 10 days. Based on the findings, fibrous bed B. velezensis Al-Dhabi 140 could be an efficient strain for tetracycline removal from artificial wastewater, even from natural wastewater.