Morphology modulation in evaporative drying mediated crystallization of sodium chloride solution droplet with surfactant

Deposition patterns formed by the evaporation of linear diblock copolymer solution nanodroplets on solid surfaces

The evaporation-induced deposition pattern of the linear diblock copolymer solution has attracted attention in recent years. Given its critical applications, we study deposition patterns of the linear diblock copolymer solution nanodroplet on a solid surface (the wall) by molecular dynamics simulations. This study focuses on the influence of the nonbonded interaction strength, including the interaction between the wall and polymer blocks (ɛAW and ɛBW), the interaction between the solvent and the wall (ɛSW), and the interaction between polymer blocks (ɛAB). Conditions leading to diverse deposition patterns are explored, including the coffee-ring and the volcano-like structures. The formation of the coffee-ring structure is attributed to receding interfaces, the heterogeneity inside the droplet, and the self-assembly of polymer chains. This study contributes to the establishment of guidelines for designing deposition patterns of the linear diblock copolymer solution nanodroplet, which facilitates practical applications such as inkjet printing.

Evaporative Deposition of Surfactant-Laden Nanofluid Droplets over a Silicon Surface

Morphologies of evaporative deposition, which has been widely applied in potential fields, were induced by the competition between internal flows inside evaporating droplets. Controlling the pattern of deposition and suppressing the coffee-ring effect are essential issues of intense interest in the aspects of industrial technologies and scientific applications. Here, evaporative deposition of surfactant-laden nanofluid droplets over silicon was experimentally investigated. A ring-like deposition was formed after complete evaporation of sodium dodecyl sulfate (SDS)-laden nanofluid droplets with an initial SDS concentration ranging from 0 to 1.5 CMC. In the case of initial SDS concentrations above 1.3 CMC, no cracks were observed in the ring-like deposition, indicating that the deposition patterns of nanofluid droplets could be completely changed and cracks could be eliminated by sufficient addition of SDS. With the increase of the initial concentration of hexadecyl trimethylammonium bromide (CTAB), the width of the deposition ring gradually decreased until no ring-like structure was formed. On the contrary, with the increase of the initial Triton X-100 (TX-100) concentration, the width of the deposition ring gradually increased until a uniform deposition was generated. Moreover, when the initial TX-100 concentration was high, a "tree-ring-like" pattern was discovered. Besides, morphologies of evaporative pattern due to the addition of surfacants were qualitatively analyzed.

Scaling mechanical instabilities in drying micellar droplets

Drying-induced mechanical instabilities in aqueous solution droplets occur primarily because, during evaporation, the central liquid minimizes the surface tension by pulling the packed gel-like region, leading to a stretching effect of the liquid region at the receding wet front. Under an appropriate scenario, it finally perturbs the gel-like zone at the droplet periphery, generating cracks, wrinkles, folds, cavities, buckles, etc. Here we report unique wrinkling patterns from evaporating sessile micellar aqueous droplets on rigid and soft substrates kept at temperatures well above the ambient. The wrinkling patterns remarkably vary depending on the material's elastic modulus and substrate, the concentration of the micellar solution (C_CTAB), and the substrate temperature (T_S). In the low concentration regime (C_CTAB ≤ 0.0364 wt%), coffee-ring-like morphologies are observed devoid of any wrinkling morphology irrespective of T_S and the substrate's elastic modulus. In the high initial concentration regime (C_CTAB ≥ 0.0364 wt%), for droplets deposited at T_S ≥ 85 °C, wrinkle formation starts at the droplet peripheral zone, radial on the stiff glass substrate, and annular on the soft cross-linked PDMS substrate. At C_CTAB ≥ 2.73 wt%, radial wrinkles on the glass substrate and annular wrinkles on the cross-linked PDMS substrate nucleate from the edges connecting to the central region of the deposit. The ratio between the width of the gel-like deposit (or wrinkle length) and the droplet's radius scales with the initial concentration of the surfactant and depends on the initial equilibrium contact angle of the micellar droplets. Our results support existing understandings of mechanical instabilities of dried deposits, which satisfies interdependent scaling relationships among their number, lengthscale (dried deposit radius, the wavelength of the wrinkles, and peripheral undulations from Rayleigh-Bénard instability), thickness, and elastic modulus. Interestingly, we found substrate-dependent antagonistic interdependence of the elastic modulus of the dried deposit with the initial surfactant concentration.

Hierarchical Exploration of Drying Patterns Formed in Drops Containing Lysozyme, PBS, and Liquid Crystals

Biological systems, by nature, are highly complex. These systems exhibit diverse hierarchical spatial and temporal features when driven far from equilibrium. The generated features are susceptible to the initial conditions that largely depend on vast parameter space. Extracting information on their properties and behavior thus becomes far too complex. This work seeks to examine the drying kinetics of the drops containing a globular protein (xlysozyme (Lys)), phosphate buffer saline (PBS), and thermotropic liquid crystal (LCs). The drying evolution and the morphological crack patterns of these drops are examined using high-resolution microscopy, textural image analysis, and statistical methods. This study observes that the textural parameters can identify the (i) phase separation of the salts present in the PBS and (ii) the LCs’ birefringence during the drying evolution. This birefringence activities of the LCs slow down when the initial PBS concentration is increased from 0.25 to 1× despite using a fixed volume of LCs. To comprehend such a surprising effect, the combinations of (i) Lys+PBS and (ii) PBS+LCs are thoroughly examined. A phase diagram is established as a function of initial concentrations of Lys and PBS. The scanning electron microscopic images of Lys+PBS reveal that the tuning between lysozyme and salt concentrations in PBS plays a significant role in determining the morphological patterns. The Lys drops with and without LCs exhibit two distinct regions: the peripheral ring (“coffee-ring”) and the central ones. This phase-separated ring formation indicates that the film containing Lys and salts might have formed on top of these LCs in the central region, which reduces the optical response (birefringence) of LCs. A physical mechanism is proposed in this paper to anticipate the redistributions of LCs in a multi-component system such as Lys+PBS+LCs.

Cationic surfactant-directed structural control of NaCl crystals from evaporating sessile droplets

We report morphological regulation of NaCl (sodium chloride) crystals through the evaporative crystallisation process of microdroplets containing a cationic surfactant CTAB (cetyltrimethylammonium bromide). Various fascinating evaporative salt morphologies are observed using different combinations of salt (C_NaCl) and surfactant (C_CTAB) concentrations. Each observed morphology is carefully explained by the interplaying physical phenomena, such as crystallisation, micellisation, evaporative dewetting, and surface adsorption of anionic couneterions. Salt morphologies are investigated for low (C_NaCl = 0.1 (M)), intermediate (C_NaCl = 0.5 (M)) and high (C_NaCl = 2 (M)) concentrations, whereas surfactant concentrations are varied four orders of magnitudes (from 0.0001 (M) to 0.1 (M)). Interestingly, we observe a threshold in C_CTAB at 0.001 (M), beyond which the peripheral rings of dried deposits are found to be composed of CTAB for C_NaCl = 0.1 (M), while the same is seen to be made up of NaCl for C_NaCl = 2 (M). We have explained the morphological evolution by the process of competitive surface adsorption phenomenon between Cl^- and Br^- counter ions. Such a detailed study of saline droplet crystallisation in the presence of a cationic surfactant underpins the fundamental understanding of the crystallisation process. In addition, it may further impact application sectors where crystallisation of saline solution plays an important role, especially in the presence of additives.

Continuous Optical Measurement of Internal Dynamics in Drying Colloidal Droplets

Accessing the colloidal dynamics non-invasively and continuously during the phase transition of a colloidal system is challenging but critical. Here, we demonstrate the use of spatiotemporal coherence-gated light scattering for studying the internal dynamics of drying colloidal droplets. The continuously acquired signal originates from a picoliter-sized volume located at the droplet-substrate interface. The measurement is non-contact, non-invasive, and label free and permits real-time observations of both optical and mechanical changes in the measurement volume. Additionally, some macroscopic descriptors of the drying process can be constructed from the microscopic measurement, providing ample information of the process. Implemented with an endoscopic-like probe, this system can be easily incorporated into the existing drop profiling instruments, which is potential for the full characterization of dynamic colloidal droplets.

Controllable light-induced droplet evaporative crystallization

Droplet evaporative crystallization is one of the practical tools for clinical diagnosis, environmental monitoring, and pharmaceutical synthesis. Herein, we proposed a controllable and flexible light strategy to manipulate the droplet evaporative crystallization, in which the photothermal effect of a focused infrared laser actuated intense evaporation to attain the droplet evaporative crystallization. Due to the localized heating effect, not only the droplet evaporative crystallization could be promoted, but also the resultant Marangoni-flow enabled the crystals to be concentrated, exhibiting excellent controllability. Besides, a relationship between the crystallization starting time and the solution concentration/laser power was achieved, which benefited the manipulation of the droplet evaporative crystallization. The light strategy proposed in the present study possesses promising potential for future applications.

Toward Controlling Evaporative Deposition: Effects of Substrate, Solvent, and Solute

Understanding evaporative deposition from a colloidal suspension and on-demand control over it are important due to its industrial and biomedical applications. In particular, it is known that interactions among substrate, solute, and solvent have important consequences on evaporative depositions; however, how these are affecting the deposition patterns and at which conditions these interactions are prominent need detailed investigations. Here we report that the total time of deposition (t_d) and the geometric shape of the droplet (L_c = initial footprint diameter/height) have a significant role in determining the evaporative deposition patterns. We have identified four zones based on t_d and L_c, and found that with longer deposition time (high t_d) and larger available space for particle motion within a liquid droplet (high L_c), deposition patterns were governed by the interactions among the substrate, solute, and solvent. We also experimentally demonstrated that the pinned contact line is indispensable for the "coffee ring" effect by comparing the deposition on surfaces with and without hysteresis. The effect of the Marangoni flow is also discussed, and it is shown that by controlling Marangoni flow, one can manipulate the droplet deposition from uniform disk-like to coffee ring with a central deposition.

Role of surfactant in controlling the deposition pattern of a particle-laden droplet: Fundamentals and strategies

Evaporation of particle-laden droplets has attracted wide attention propelled by the vast applications from disease diagnostics, bio-medicines, agriculture, inkjet printing to coating. Surfactant plays a vital role in controlling the deposition patterns of dried droplets, thanks to its extensive influences on particle transport through adsorbing at particle surface and droplet interfaces as well as suppressing or facilitating multiple flows. In order to accurately control the subtle morphology of a deposition, it is of significance to systematically elaborate the microscopic functions of surfactant, and bridge them to the various phenomena of a droplet. In this review, we first elucidate the effects of surfactant on the flow paradigms of capillary flow, solutal Marangoni flow, thermal Marangoni flow, and the mixed flow patterns as capillary force, thermal and solutal surface tensions are in competence or collaboration. Second, surfactant adsorption at particle surface and droplet interfaces modifying short-range and long-range forces such as electrostatic force, van der Waals force, capillary attraction, and hydrophobic bonding among particles and between particles and interfaces are introduced by the underlying mechanisms and approaches. Two phase diagrams are developed to respectively illustrate the roles of capillary force among particles, and the electrostatic interaction between particles and solid-liquid interface in modifying the deposition profiles. This review could build a fundamental framework of knowledge for evaporating particle-laden surfactant solution droplets, and may shed light on strategies to manipulate particle deposition in abundant fluidic-based techniques.