A versatile route for the fabrication of micro-patterned polylactic-acid (PLA)-based membranes with tailored morphology via breath figure imprinting

Breath figure imprinting, based on surface instabilities combined with fast polymer evaporation in a humid environment, enables the creation of micro-patterned membranes with tailored pore sizes. Despite being a simple procedure, it is still challenging to fully understand the dynamics behind the formation of hierarchical structuring. In this work, we used the breath figure technique to prepare porous PLA-based (polylactic acid) membranes with two distinctive additives, polyvinylidene fluoride (PVDF) and zinc oxide nanoparticles (ZnO NPs). The selection of these additives was governed by their unique properties and the potential synergistic effects; when blended with PLA, the addition of NPs leads to more uniform structures with tunable characteristics and potential multifunctionality. This article sheds light on the multifaced interactions that intricate the interplays between PLA, PVDF, and ZnO, thus governing their assembly. Through a comprehensive investigation, we scrutinize the impact of blending PVDF and different concentrations of ZnO NPs on the morphology and chemical properties of the final self-assembled PLA membranes while presenting an advanced understanding of the potential applications of PLA-self-assembly porous membranes in various industrial sectors.

Fabrication of Adsorption-Type Hierarchical Functional Films by Using a Facile Swollen Based Breath Figure Method

The morphology transition from primary to hierarchical adsorption-type microporous domains of amphiphilic block copolymer (BCP) honeycomb-structured films is demonstrated by a facile swollen based breath figure (BF) method. The characteristic parameters of poly(4-vinylpyridine)-block-polystyrene (P4VP-b-PS) hierarchical micro- and submicro-porous films can be controlled by changing the length of segments or subsequent swelling conditions. A plausible mechanism is demonstrated in this research. A typical amphiphilic BCP with very low volume content of hydrophilic blocks (f_P4VP ≤ 0.050) can efficiently stabilize water droplets and inherently assist in the formation of morphology transition. This BCP film can be used for Cr(VI) removal from wastewater, which additionally has enormous potential application in the field of novel optical devices, soft lithography, size-selective separation, etc. This article is protected by copyright. All rights reserved.

Recent advances on porous interfaces for biomedical applications

Porous structures on solid surfaces prepared artificially through the water droplet template method have the features of easy operation, low cost and self-removal of templates, and thus are widely applied in the fields of medicine, biomedicine, adsorption, catalysis, and separation, optical and electronic materials. Due to their tunable dimensions, abundant selection of materials, mechanical stability, high porosity, and enlarged pore surface, the formed porous interfaces show specific significance in bio-related systems. In this study, recent achievements related to applications of porous interfaces and a focus into biological and medical-related systems are summarized. The discussion involves the preparation of porous interfaces, and porous interface-induced cell behaviors including culture, growth, proliferation, adhesion, and differentiation of cells. The inhibitory effect of bacteria and separated features of microorganisms supported by porous interfaces, the immobilization of biomolecules related to proteins, DNA and enzymes, and the controllable drug delivery are also discussed. The summary of recent advances pointed out in the study, are suggestive of insights for motivating unique potential applications including their extension to porous interfaces in biomedical materials.

Self-Assembled Mechanochromic Shape Memory Photonic Crystals by Doctor Blade Coating

Mechanochromic shape memory photonic crystals can memorize their original structures and recover the inherent structural colors in response to external stimuli; thereby they have rendered various important optical applications. Unfortunately, most existing shape memory polymers are thermoresponsive, and the corresponding mechanochromic characteristics are limited by the heat-demanding programming process. Besides that, a great majority of current fabrication methodologies suffer from low throughput, hindering the practical applications. Herein, a scalable technology is developed to engineer macroporous shape memory photonic crystals by self-assembling silica colloidal crystals in a polyurethane acrylate/polyethoxylated trimethylolpropane triacrylate/poly(ethylene glycol) diacrylate matrix, followed by a wet etching treatment to selectively remove silica colloids. The as-created photonic crystals display a brilliant structural color, which is reversibly tunable with mechanical deformation at ambient conditions. Upon stretching, the reduced interlayer lattice spacing of the photonic crystals leads to a blueshift of the reflection peak position and a significant color change. Importantly, the stretched macroporous film can fix its temporary structures without applying any contact force and simultaneously recover its original configuration and appearance by applying ethanol evaporation-induced capillary pressures. The reversibility and the dependence of templated silica colloid size on mechanochromic characteristics have also been investigated in the research.

One-Step Electrochemically Prepared Graphene/Polyaniline Conductive Filter Membrane for Permeation Enhancement by Fouling Mitigation

In the electrofiltration process, membrane conductivity plays a decisive role in improving the antifouling performance of the membrane. In this paper, combining the preparation of graphene (Gr) with the fabrication of the Gr layer on the surface of a polyaniline (PANI) membrane, a graphene/PANI (Gr/PANI) conductive membrane was prepared creatively by the one-step electrochemical method. The properties of the as-prepared Gr/PANI membrane were studied systematically. By the tests of Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, and atomic force microscopy, it was confirmed that Gr was successfully produced and was combined with the PANI membrane well. Field scanning electron microscopy with energy-dispersive X-ray analysis further confirmed that the top surface and the upper layer pore walls of the membrane were randomly covered by Gr. The antifouling performance of the prepared membrane was evaluated by studying the permeation flux of the yeast suspension, compared with the ones with no electric field: the total permeation flux at 1 V direct current (dc) increased by 109%; besides, under 1 V dc, the average flux of the Gr/PANI membrane was approximately 1.4 times that of the PANI membrane. This approach may provide a promising strategy for the combination of Gr with conductive polymers to produce separation membranes.

Surface Metallization of Porous Polymer Materials for Multifunctional Applications

Porous materials have attracted great interest in recent years, and a variety of surface modification methods have been developed to endow porous materials with multifunctional applications. Herein, multifunctional porous materials are fabricated based on surface metallization. Metallized sponges with Ag and Cu are highly hydrophobic and are still hydrophobic under oil. The metallized sponges selectively adsorb oils from oil/water mixtures and can completely remove oils from water. We further demonstrate continuous oil-water separation by the metallized sponges with the aid of a peristaltic pump. The Ag-metallized materials show high catalytic performance for both chemical reduction and dye degradation. The catalytic reduction efficiency of 4-nitrophenol reaches 97.7% within 60 min and remains as high as 96% after 15 cycles. Moreover, the metallized materials show 99.99% bactericidal efficiency for both Staphylococcus aureus and Escherichia coli. Particularly, the Cu-metallized materials exhibit stable conductivity under deformation; and metal patterns are realized via the metallization method combined with a patterned mask, which may provide a feasible approach for flexible electronics. This work provides a versatile method to introduce metal coatings to porous materials, broadening the applications of porous materials.