Fluorescent molecularly imprinted nanoparticles with boronate affinity for selective glycoprotein detection

Ratiometric Molecularly Imprinted Particle Probes for Reliable Fluorescence Signaling of Carboxylate-Containing Molecules

In addition to sensitivity, selectivity, and portability, chemical sensing systems must generate reliable signals and offer modular configurability to address various small molecule targets, particularly in environmental applications. We present a versatile, modular strategy utilizing ratiometric molecularly imprinted particle probes based on BODIPY indicators and dyes for recognition and internal referencing. Our approach employs polystyrene core particles doped with a red fluorescent BODIPY as an internal standard, providing built-in reference for environmental influences. A molecularly imprinted polymer (MIP) recognition shell, incorporating a green-fluorescent BODIPY indicator monomer with a thiourea binding site for carboxylate-containing analytes, is grafted from the core particles in the presence of the analyte as the template. The dual-fluorescent MIP probe detects fexofenadine as the model analyte with a change in green emission signal referenced against a stable red signal, achieving a detection limit of 0.13 μM and a broad dynamic range from 0.16 μM to 1.2 mM, with good discrimination against other antibiotics in acetonitrile. By selecting a versatile dye scaffold and recognition element, this approach can be extended to other carboxylate-containing analytes and/or wavelength combinations, potentially serving as a robust multiplexing platform.

Application of electrochemical sensors based on nanomaterials modifiers in the determination of antipsychotics

At present, the content of antipsychotics in samples is always analyzed by traditional detection methods, including mass spectrometry (MS), spectrophotometry, fluorescence, capillary electrophoresis (CE). However, conventional methods are cumbersome and complex, require a large sample volume, many pre-processing steps, long analysis cycles, expensive instruments, and need well-trained detection capabilities personnel. In addition, patients with schizophrenia require frequent and painful blood collection procedures, which adds additional treatment costs and time burdens. In view of these factors, electrochemical methods have become the most promising candidate technology for timely analysis due to their low cost, simple operation, excellent sensitivity and specificity. As we all know, nanomaterials play an extremely important role in electrochemical sensing applications. As the sensor modifiers, nanomaterials enable electrochemical analysis to overcome the time-consuming and labor-intensive shortcomings of traditional detection methods, and greatly reduce the research cost. Nanomaterials modified electrodes can be used as sensors to determine the concentration of antipsychotics in organisms quickly and accurately, which is a bright spot in the application of nanomaterials. The combination of different nanomaterials can even form a nanocomposite with a synergistic effect. This paper firstly reviews the application of nanomaterials-modified sensors on the basis of research in the past ten years, reviews the use of nanomaterial-modified sensors to quickly and accurately determine the concentration of antipsychotics in biological samples, and demonstrates a new idea of using nanomaterials sensors for drug monitoring and determination. At the end of this review, a brief overview is given of the limitations and the future prospects of nanomaterial sensors for the determination of antipsychotics concentrations.

Anion Exchange Affinity-Based Controllable Surface Imprinting Synthesis of Ultrathin Imprinted Films for Protein Recognition

Anion exchange affinity-based controllable surface imprinting is an effective approach to overcome low imprinting efficiency and high non-specific binding capacity. The template proteins were first immobilized on the anchored tetraalkylammonium groups of the nanoparticles via anion exchange affinity-based interactions, enabling monolayer sorption using a low template concentration. The combined use of surface-initiated photoiniferter-mediated polymerization to precisely control the imprinted film thickness, allowing the formation of homogeneous binding cavities, and the construction of effective binding sites resulted in a low non-specific binding capacity and high imprinting efficiency. The obtained imprinted films benefited from the anion exchange mechanism, exhibiting a higher imprinting factor and faster binding rate than the reference material. Binding tests revealed that the binding strength and selective recognition properties could be tuned to a certain extent by adjusting the NaCl concentration. Additionally, in contrast to the harsh template elution conditions of the covalent immobilization approach, over 80% of the template molecules were readily removed from the imprinted films using supersonic elution with an aqueous mixture of NaCl and HAc. Introducing template immobilization by anion exchange interactions to the synthesis of imprinted materials may provide a new approach for effective biomacromolecular imprinting.

Aggregation-induced emission monomer-based fluorescent molecularly imprinted poly(ionic liquid) synthesized by a one-pot method for sensitively detecting 4-nitrophenol

An aggregation-induced emission monomer-based fluorescent molecularly imprinted poly(ionic liquid) (AIE-FMIPIL) was synthesized for the first time with an AIE probe 4-(1,2,2-triphenylvinyl)phenyl acrylate (TPE), and an ionic liquid as dual functional monomers, and an ionic liquid as cross-linker. AIE-FMIPIL displayed a sphere-like shape and its average diameter was 410 nm. The absolute quantum yields of TPE and AIE-FMIPIL were 9.23% and 12.61%, respectively. The synergetic effect of TPE in the AIE-FMIPIL framework contributed to the higher quantum yield of AIE-FMIPIL. 4-Nitrophenol (4-NP) efficiently quenched AIE-FMIPIL with high fluorescence based on the Förster resonance energy transfer mechanism. The synthesized AIE-FMIPIL sensor was highly sensitive for 4-NP detection (linear range, 0.02-1.5 μM) in the optimal detection condition, with a low detection limit of 10 nM (S/N = 3). AIE-FMIPIL showed increased sensitivity and quenching efficiency compared with AIE-FMIP comprising a traditional monomer and cross-linker. AIE-FMIPIL exhibited selective binding to 4-NP because of the imprinted sites. AIE-FMIPIL was adopted to detect 4-NP in environmental samples.

Improved detection and recognition of glycoproteins using fluorescent polymers with a molecular imprint based on glycopeptides

Highly specific novel glycopeptide-based fluorescent molecularly imprinting polymers (g-FMIPs) were constructed to recognize and determine the target glycoprotein in complex biological samples. The glycopeptide of ovalbumin (OVA), with the unique structural characteristics of glycan and peptide, and potential application in improving the specificity recognition of g-FMIPs, was selected as the template molecule. The nitrogen-doped graphene quantum dots (N-GQDs) were introduced for fluorescence response. The obtained g-FMIPs possessed rapid binding kinetics and high adsorption capacity. Notably, the g-FMIPs exhibited remarkable selectivity and sensitivity with a high imprinting factor of 6.57, good linearity of 0.625 - 5.00 μM, and limit of detection of 0.208 μM. After treatment with g-FMIPs, the concentration of OVA in eluted solution was 1.07 μM. The obtained recoveries at 1.43 μM, 2.86 μM, and 4.29 μM spiked concentrations were 97.2%, 93.5%, and 101%, respectively, and the relative standard deviations were 2.6%, 4.2%, and 1.1%, respectively. In summary, the proposed strategy will expand the MIPs construction method and its application prospects in precision recognition and sensitive detection of trace glycoproteins from complex biosamples.

A microfluidic approach for rapid and continuous synthesis of glycoprotein-imprinted nanospheres

Many strategies have been reported for the preparation of glycoproteins imprinted polymers, but they take a long time and cannot produce imprinted polymers continuously. Herein, a microfluidic synthesis approach was developed to make glycoproteins imprinted nanospheres rapidly and continuously. By using ovalbumin as a model template and a synthesized phenylboronic acid-tagged silane reagent as the functional monomer, the synthetic conditions including the polymerization contents, the flow rate and the microfluidic reactor size were comprehensively studied. Under the optimized conditions, the glycoprotein imprinted nanospheres could be synthesized rapidly (<2 h), and exhibited high specificity with cross-reactivity factors of 1.3 (ovotransferrin), +∞ (horse-radish peroxidase), 5.1 (β-lactoglobulin) and 101 (bovine serum albumin). The kinetic and equilibrium binding behaviors, reusability and potential applications of the glycoprotein imprinted nanosphere were investigated. Such microfluidic synthesis strategy can be easily extended to produce other target glycoproteins imprinted nanospheres, as well as non-glycoproteins by using suitable functional monomers.

Synergistic recognition of transferrin by using performance dual epitope imprinted polymers

Transferrin (Trf) is a new type of active drug targeting carrier and disease biomarker that regulates the balance of iron ions in human body. The recognition and isolation of Trf is of great significance for disease diagnosis and treatment. Thus, a new type of magnetic dual affinity epitope molecularly imprinted polymer coated on Fe₃O₄ nanoparticles (Fe₃O₄@DEMIP) was successfully prepared for specific recognition of Trf. C-terminal nonapeptide and Trf glycan were selected as bi-epitope templates for metal chelation and boron affinity immobilization, respectively. 4-vinylphenylboric acid (4-VP), N-isopropyl acrylamide (NIPAM) and zinc acrylic were used as functional monomers. Results showed that Fe₃O₄@DEMIP exhibited excellent specific recognition ability adsorption capacity toward Trf, with an adsorption of 43.96 mg g^-1 (RSD = 3.28%) and a more satisfactory imprinting factor (about 6.60) than that of other reported imprinting methods. In addition, Fe₃O₄@DEMIP displayed pH, temperature and magnetic sensitivity properties to realize temperature and pH-controlled recognition and release of target proteins and magnetic rapid separation. Furthermore, the Fe₃O₄@DEMIP coupled with high-performance liquid chromatography (HPLC) analysis was successfully used for specific recognition of Trf in biosamples. This study provides a reliable protocol for preparing metal chelation and boron affinity dual affinity bi-epitope molecularly imprinted polymers for synergistic and efficient recognition of biomacromolecules in the complex biological systems.

Boronic acid-functionalized spherical polymer brushes for efficient and selective enrichment of glycoproteins

Glycoproteins are related to many biological activities and diseases, and thereby their efficient capture and enrichment for diagnostics and proteomics have emerged to exhibit great significance. However, the lack of materials with high binding capacity and selectivity is still a big obstacle for further application. Herein, we reported a facile and eco-friendly approach to fabricate spherical polymer brushes with multiple boronic acid groups. Specifically, the whole process can be divided into three steps, the polystyrene (PS) core was obtained by traditional emulsion polymerization, followed by immobilization of a home-made photoinitiator. Subsequently, boronic acid-functionalized polymer chains (PBA) were chemically grafted via photo-emulsion polymerization, leading to spherical polymer brushes (PS-PBA) with boronate affinity. The particle size, morphology, and composition of as-prepared spherical polymer brushes were systematically characterized. The characteristics of glycoproteins binding to the spherical polymer brushes under different conditions, including pH values and ionic strength, were also investigated. PS-PBA brushes possess fast binding speed (30 min) and high binding capacity for glycoprotein ovalbumin (OVA) (377.0 mg g^-1) under physiological pH conditions at 25 °C, because the low steric hindrance of flexible polymeric PBA chains facilitates the interaction between boronic acid groups and glycoproteins. Moreover, the binding capacity of PS-PBA brushes for glycoprotein OVA was ∼6.7 times higher than that for non-glycoprotein bovine serum albumin (BSA), indicating the excellent selective adsorption. This study provided a facile and efficient approach for the fabrication of boronic acid-functionalized materials that will be useful in the enrichment and separation of glycoproteins for the diagnosis of diseases.

Dendrimer-assisted boronate affinity cellulose foams for the efficient and selective separation of glycoproteins

Surfaces engineered to identify and enrich glycoproteins are of considerable interest in the diagnostic and detection fields. A boronate affinity (BA) material was proposed as a potential candidate for the isolation of glycoproteins. However, this material has the disadvantages of low efficiency and non-degradability. Herein, a novel dendrimer-amplified BA cellulose foam (PEI-PBA-CF) was fabricated via a mild two-step approach. The as-prepared PEI-PBA-CF exhibited a rapid adsorption equilibrium rate (within 60 min) and outstanding adsorption capacity for horseradish peroxidase (537.4 mg g^-1) and ovalbumin (495.5 mg g^-1). Furthermore, competitive adsorption experiments demonstrated that PEI-PBA-CF could achieve selective separation and purification of glycoproteins from complex biological samples due to the synergistic effect of the improved BA capacity by the dendrimer and the well-interconnected porous structure of the biomass matrix. Consequently, these cellulose foams might present new application opportunities in analytical and biomedical fields.

A new type of magnetic molecular imprinted material combined with β-cyclodextrin for the selective adsorption of zearalenone

In this paper, a new magnetic molecular imprinted polymer–cyclodextrin (MMIP–CD) material was prepared by connecting β-cyclodextrin (CD) on the surface of a magnetic molecular imprinted polymer (MMIP) and used for the rapid and specific adsorption of zearalenone (ZEN).