The fabrication of an MoS2 QD-AuNP modified screen-printed electrode for the improved electrochemical detection of cefixime

Recent advancements of smartphone-based sensing technology for diagnosis, food safety analysis, and environmental monitoring

The emergence of computationally powerful smartphones, relatively affordable high-resolution camera, drones, and robotic sensors have ushered in a new age of advanced sensible monitoring tools. The present review article investigates the burgeoning smartphone-based sensing paradigms, including surface plasmon resonance (SPR) biosensors, electrochemical biosensors, colorimetric biosensors, and other innovations for modern healthcare. Despite the significant advancements, there are still scarcity of commercially available smart biosensors and hence need to accelerate the rates of technology transfer, application, and user acceptability. The application/necessity of smartphone-based biosensors for Point of Care (POC) testing, such as prognosis, self-diagnosis, monitoring, and treatment selection, have brought remarkable innovations which eventually eliminate sample transportation, sample processing time, and result in rapid findings. Additionally, it articulates recent advances in various smartphone-based multiplexed bio sensors as affordable and portable sensing platforms for point-of-care devices, together with statistics for point-of-care health monitoring and their prospective commercial viability.

Voltammetric Determination of Isoniazid in the Presence of Acetaminophen Utilizing MoS2-Nanosheet-Modified Screen-Printed Electrode

We used MoS₂ nanosheets (MoS₂ NSs) for surface modification of screen-printed electrode (MoS₂NSs-SPE) aimed at detecting isoniazid (INZ) in the presence of acetaminophen (AC). According to analysis, an impressive catalytic performance was found for INZ and AC electro-oxidation, resulting in an appreciable peak resolution (~320 mV) for both analytes. Chronoamperometry, differential pulse voltammetry (DPV), linear sweep voltammogram (LSV), and cyclic voltammetry (CV) were employed to characterize the electrochemical behaviors of the modified electrode for the INZ detection. Under the optimal circumstances, there was a linear relationship between the peak current of oxidation and the various levels of INZ (0.035–390.0 µM), with a narrow limit of detection (10.0 nM). The applicability of the as-developed sensor was confirmed by determining the INZ and AC in tablets and urine specimens, with acceptable recoveries.

A simple sensing platform based on a 1T@2H-MoS2/cMWCNTs composite modified electrode for ultrasensitive detection of illegal Sudan I dye in food samples

The work presented here describes a highly sensitive and simple electrochemical sensor for the detection of Sudan I dye based on a nanocomposite made of MoS₂ heterogeneous nanosheets (1T@2H-MoS₂) and carboxylated carbon nanotubes (cMWCNTs) (1T@2H-MoS₂/cMWCNTs). XPS results indicate that the content of 1T phase MoS₂ was estimated to be 72% in 1T@2H-MoS₂. Electron microscopy results show that the tubular cMWCNTs are uniformly interwoven in MoS₂ nanosheets to form a three-dimensional network structure. Due to the synergistic electrocatalytic ability and high electroactive surface area, the 1T@2H-MoS₂/cMWCNTs modified electrode demonstrated excellent analytical performance for Sudan I, including simple operation, good stability and a wide linear range from 5.00 × 10^-9 to 2.00 × 10^-6 mol L^-1 and 2.00 × 10^-6 to 1.00 × 10^-4 mol L^-1 with an ultra-low detection limit of 1.56 × 10^-9 mol L^-1. The recoveries of Sudan I from spiked real samples (chilli powder and ketchup) were in the range of 95.60% to 106.10% with low RSD (<5%), indicating that the 1T@2H-MoS₂/cMWCNTs modified electrode is a promising tool for the analysis of illegal Sudan I in food samples.

Electrochemical sensing of pioglitazone hydrochloride on N-doped r-GO modified commercial electrodes

In this paper, we explain the electrochemical sensing of commercially available pioglitazone hydrochloride (PIOZ) tablets on a nitrogen (N) doped r-GO (Nr-GO) modified commercial glassy carbon electrode (GCE) and a commercial screen printed graphite electrode (SPGE). Nr-GO is synthesized by the chemical reduction of graphene oxide (GO) and simultaneous insertion of an N-dopant by hydrazine monohydrate. Pristine GO itself is prepared by chemical exfoliation of bulk graphite. Upon chemical reduction, the exfoliated GO sheets restack together leaving behind the doped N-atom as evidenced by XRD and Raman spectroscopy. The N-atom exists in the pyrrolinic and pyridinic form at the edge of graphitic domains which is confirmed by XPS. The as-synthesized Nr-GO is used for the preparation of electro-active electrodes with the help of the GCE and SPGE. These electrodes have the capability to oxidize PIOZ by a diffusion dominated process as evidenced by the impedance spectroscopic technique. The differential pulse voltammetric responses of different concentrations of PIOZ are assessed over the Nr-GO modified GCE and SPGE, which exhibit better limits of detection (LODs) of 67 nM and 29 nM, respectively, compared to those from earlier reports. These assays exhibit non-interfering capability in the presence of various body interferents at pH = 7.0.

Tagetes erecta as an organic precursor: synthesis of highly fluorescent CQDs for the micromolar tracing of ferric ions in human blood serum

The present article illustrates the green synthesis of novel carbon quantum dots (CQDs) from biomass viz. Tagetes erecta (TE), and subsequently fabrication of a metal ion probe for the sensing of Fe³⁺ in real samples. TE-derived CQDs (TE-CQDs) have been synthesized by a facile, eco-friendly, bottom-up hydrothermal approach using TE as a carbon source. The successful synthesis and proper phase formation of the envisaged material has been confirmed by various characterization techniques (Raman, XRD, XPS, TEM, and EDS). Notably, the green synthesized TE-CQDs show biocompatibility, good solubility in aqueous media, and non-toxicity. The as-synthesized TE-CQDs show an intense photoluminescence peak at 425 nm and exhibit excitation dependent photoluminescence behavior. The proposed TE-CQD-based probe offers a remarkable fluorescence (FL) quenching for Fe³⁺ with high selectivity (K_q ∼ 10.022 × 10¹³ M⁻¹ s⁻¹) and a sensitive/rapid response in a linear concentration range 0–90 μM (regression coefficient R² ∼ 0.99) for the detection of Fe³⁺. The limit of detection (LOD) of the probe for Fe³⁺ has been found as 0.37 μM in the standard solution. It has further been applied for the detection of Fe³⁺ in real samples (human blood serum) and displays good performance with LOD ∼ 0.36 μM. The proposed TE-CQD-based ion sensing probe has potential prospects to be used effectively in biological studies and clinical diagnosis.

TE-CQDs synthesized via the hydrothermal method for the detection of Fe³⁺ in HBS.

Mo-Based Layered Nanostructures for the Electrochemical Sensing of Biomolecules

Mo-based layered nanostructures are two-dimensional (2D) nanomaterials with outstanding characteristics and very promising electrochemical properties. These materials comprise nanosheets of molybdenum (Mo) oxides (MoO2 and MoO3), dichalcogenides (MoS2, MoSe2, MoTe2), and carbides (MoC2), which find application in electrochemical devices for energy storage and generation. In this feature paper, we present the most relevant characteristics of such Mo-based layered compounds and their use as electrode materials in electrochemical sensors. In particular, the aspects related to synthesis methods, structural and electronic characteristics, and the relevant electrochemical properties, together with applications in the specific field of electrochemical biomolecule sensing, are reviewed. The main features, along with the current status, trends, and potentialities for biomedical sensing applications, are described, highlighting the peculiar properties of Mo-based 2D-nanomaterials in this field.