Nanoparticle and microparticle-based systems for enhanced oral insulin delivery: A systematic review and meta-analysis

Diabetes mellitus (DM) prevalence is rising worldwide. Current therapies comprising subcutaneous insulin injections can cause adverse effects such as lipodystrophy, local reactions like redness and swelling, fluid retention, and allergic reactions. Nanoparticle carriers for oral insulin are groundbreaking compared to existing methods because they are non-invasive treatments, showing operational convenience, controlled release profile, and ability to simulate the physiological delivery route into the bloodstream. These systems improve patient adherence and have demonstrated the potential to lower blood glucose levels in DM. We present a systematic review and meta-analysis aimed at compiling relevant data to pave the way for developing innovative nano- and microparticles for the oral delivery of insulin. Our analysis of 85 articles revealed that the diminution of glucose levels is not proportional to the administered insulin dosage, which ranged from 1 to 120 International Units (IU). The meta-analysis data indicated that 25 IU of encapsulated porcine insulin did not produce a statistically significant outcome (p = 0.93). In contrast, a dosage of 30 IU was efficacious in eliciting an optimal hypoglycemic effect compared to excipient controls. Parameters such as a high degree of encapsulation (~ 90%), particle size (200-400 nm), and polydispersity index (0.086-0.3) are all associated with lower blood glucose levels. These parameters were also significant in the linear regression analysis. Among the excipients employed, chitosan emerged as a prevalent excipient in formulations due to its biocompatible and biodegradable properties and its ability to establish stable polymeric matrices. Even though oral insulin administration is a promising therapeutic method, it cannot guarantee preclinical safety and therapeutic efficacy yet in regulating glucose levels in diabetic conditions.

Design of charge converting lipid nanoparticles via a microfluidic coating technique

It was the aim of this study to design charge converting lipid nanoparticles (LNP) via a microfluidic mixing technique used for the preparation and coating of LNP. LNP consisting of 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), cholesterol, N-(carbonyl-methoxypolyethyleneglycol-2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine (MPEG-2000-DSPE), and various cationic surfactants were prepared at diverging flow rate ratios (FRR) via microfluidic mixing. Utilizing a second chip in the microfluidic set-up, LNP were coated with polyoxyethylene (9) nonylphenol monophosphate ester (PNPP). LNP were examined for their stability in different physiologically relevant media as well as for hemolytic and cytotoxic effects. Finally, phosphate release and charge conversion of PNPP-coated LNP were evaluated after incubation with alkaline phosphatase and on Caco2-cells. LNP produced at an FRR of 5:1 exhibited a size between 80 and 150 nm and a positive zeta potential. Coating with PNPP within the second chip led to LNP exhibiting a negative zeta potential. After incubation with 1 U/ml alkaline phosphatase for 4 h, zeta potential of the LNP containing 1,2-dioleoyloxy-3-trimethylammonium-propane chloride (DOTAP) as cationic component shifted from - 35 mV to approximately + 5 mV. LNP prepared with other cationic surfactants remained slightly negative after enzymatic phosphate cleavage. Manufacturing of LNP containing PNPP and DOTAP via connection of two chips in a microfluidic instrument proves to show efficient change in zeta potential from negative to positive after incubation with alkaline phosphatase.

Microfluidic-based systems for the management of diabetes

Diabetes currently affects approximately 500 million people worldwide and is one of the most common causes of mortality in the United States. To diagnose and monitor diabetes, finger-prick blood glucose testing has long been used as the clinical gold standard. For diabetes treatment, insulin is typically delivered subcutaneously through cannula-based syringes, pens, or pumps in almost all type 1 diabetic (T1D) patients and some type 2 diabetic (T2D) patients. These painful, invasive approaches can cause non-adherence to glucose testing and insulin therapy. To address these problems, researchers have developed miniaturized blood glucose testing devices as well as microfluidic platforms for non-invasive glucose testing through other body fluids. In addition, glycated hemoglobin (HbA1c), insulin levels, and cellular biomechanics-related metrics have also been considered for microfluidic-based diabetes diagnosis. For the treatment of diabetes, insulin has been delivered transdermally through microdevices, mostly through microneedle array-based, minimally invasive injections. Researchers have also developed microfluidic platforms for oral, intraperitoneal, and inhalation-based delivery of insulin. For T2D patients, metformin, glucagon-like peptide 1 (GLP-1), and GLP-1 receptor agonists have also been delivered using microfluidic technologies. Thus far, clinical studies have been widely performed on microfluidic-based diabetes monitoring, especially glucose sensing, yet technologies for the delivery of insulin and other drugs to diabetic patients with microfluidics are still mostly in the preclinical stage. This article provides a concise review of the role of microfluidic devices in the diagnosis and monitoring of diabetes, as well as the delivery of pharmaceuticals to treat diabetes using microfluidic technologies in the recent literature.

Self-adjuvant Astragalus polysaccharide-based nanovaccines for enhanced tumor immunotherapy: a novel delivery system candidate for tumor vaccines

The study of tumor nanovaccines (NVs) has gained interest because they specifically recognize and eliminate tumor cells. However, the poor recognition and internalization by dendritic cells (DCs) and insufficient immunogenicity restricted the vaccine efficacy. Herein, we extracted two molecular-weight Astragalus polysaccharides (APS, 12.19 kD; APSHMw, 135.67 kD) from Radix Astragali and made them self-assemble with OVA257-264 directly forming OVA/APS integrated nanocomplexes through the microfluidic method. The nanocomplexes were wrapped with a sheddable calcium phosphate layer to improve stability. APS in the formed nanocomplexes served as drug carriers and immune adjuvants for potent tumor immunotherapy. The optimal APS-NVs were approximately 160 nm with uniform size distribution and could remain stable in physiological saline solution. The FITC-OVA in APS-NVs could be effectively taken up by DCs, and APS-NVs could stimulate the maturation of DCs, improving the antigen cross-presentation efficiency in vitro. The possible mechanism was that APS can induce DC activation via multiple receptors such as dectin-1 and Toll-like receptors 2 and 4. Enhanced accumulation of APS-NVs both in draining and distal lymph nodes were observed following s.c. injection. Smaller APS-NVs could easily access the lymph nodes. Furthermore, APS-NVs could markedly promote antigen delivery efficiency to DCs and activate cytotoxic T cells. In addition, APS-NVs achieve a better antitumor effect in established B16-OVA melanoma tumors compared with the OVA+Alum treatment group. The antitumor mechanism correlated with the increase in cytotoxic T cells in the tumor region. Subsequently, the poor tumor inhibitory effect of APS-NVs on the nude mouse model of melanoma also confirmed the participation of antitumor adaptive immune response induced by NVs. Therefore, this study developed a promising APS-based tumor NV that is an efficient tumor immunotherapy without systemic side effects.

Helical-Like Assembly of Nateglinide as Coating for Oral Delivery of Insulin and Their Synergistic Prevention of Diabetes Mellitus

Oral delivery of antidiabetic active components promises to free millions of people from daily suffering who require routine injections. However, oral insulin (Ins) and other short-acting compounds such as nateglinide (NG) in harsh gastrointestinal tract still face great challenging, including low bioavailability, and rapid elimination. In this study, inspired by the self-assembly of phenylalanine-based peptides in nature, it is showed that NG a small phenylalanine derivative, assembles into left-handed helical nanofibers in the presence of Ca2+ . These helical NG nanofibers functioned as a coating layer on the surface of Ca2+ -linked alginate (Alg) microgels for the effective encapsulation of Ins. As expected, the sustained release and prolonged circulation of Ins and NG from the Ins-loading Alg/NG microgels (Ins@Alg/NG) in the intestinal tract synergistically maintain a relatively normal blood glucose level in streptozotocin-induced diabetic mice after oral administration of Ins@Alg/NG. This further confirms that Ins@Alg/NG ameliorated Ins resistance mainly through activating Insreceptor substrate 1 (IRS1), protein kinase B (AKT), and AMP-activated protein kinase (AMPK), as well as by repressing glycogen synthase kinase-3β (GSK-3β). The strategy of using the assembly of NG as a coating achieves the oral delivery of insulin and showcases a potential for the treatment of diabetes.

The crossroad of nanovesicles and oral delivery of insulin

INTRODUCTION

Diabetes mellitus is one of the challenging health problems worldwide. Multiple daily subcutaneous injection of insulin causes poor compliance in patients. Development of efficient oral formulations to improve the quality of life of such patients has been an important goal in pharmaceutical industry. However, due to serious issues such as low bioavailability and instability, it has not been achieved yet.

AREAS COVERED

Due to functional properties of the vesicles and the fact that hepatic-directed vesicles of insulin could reach the clinical phases, we focused on three main vesicular delivery systems for oral delivery of insulin: liposomes, niosomes, and polymersomes. Recent papers were thoroughly discussed to provide a broad overview of such oral delivery systems.

EXPERT OPINION

Although conventional liposomes are unstable in the presence of bile salts, their further modifications such as surface coating could increase their stability in the GI tract. Bilosomes showed good flexibility and stability in GI fluids. Also, niosomes were stable, but they could not induce significant hypoglycemia in animal studies. Although polymersomes were effective, they are expensive and there are some issues about their safety and industrial scale-up. Also, we believe that other modifications such as addition of a targeting agent or surface coating of the vesicles could significantly increase the bioavailability of insulin-loaded vesicles.

Multifunctional systems based on nano-in-microparticles as strategies for drug delivery: advances, challenges, and future perspectives

INTRODUCTION

Innovative delivery systems are a promising and attractive approach for drug targeting in pharmaceutical technology. Among the various drug delivery systems studied, the association of strategies based on nanoparticles and microparticles, called nano-in-microparticles, has been gaining prominence as it allows targeting in a specific and personalized way, considering the physiological barriers faced in each disease.

AREAS COVERED

This review proposes to discuss nano-in-micro systems, updated progress on the main biomaterials used in the preparation of these systems, preparation techniques, physiological considerations, applications and challenges, and possible strategies for drug administration. Finally, we bring future perspectives for advances in clinical and field translation of multifunctional systems based on nano-in-microparticles.

EXPERT OPINION

This article brings a new approach to exploring the use of multifunctional systems based on nano-in-microparticles for different applications, in addition, it also emphasizes the use of biomaterials in these systems and their limitations. There is currently no study in the literature that explores this approach, making a review article necessary to address this association of strategies for application in pharmaceutical technology.

A photoactive injectable antibacterial hydrogel to support chemo-immunotherapeutic effect of antigenic cell membrane and sorafenib by near-infrared light mediated tumor ablation

Intravenously administered nanocarriers suffer from off-target distribution, pre-targeting drug leakage, and rapid clearance, limiting their efficiency in tumor eradication. To bypass these challenges, an injectable hydrogel with time- and temperature-dependent viscosity enhancement behavior and self-healing property are reported to assist in the retention of the hydrogel in the tumor site after injection. The cancer cell membrane (CCM) and sorafenib are embedded into the hydrogel to elicit local tumor-specific immune responses and induce cancer cell apoptosis, respectively. In addition, hyaluronic acid (HA) coated Bi₂S₃ nanorods (BiH) are incorporated within the hydrogel to afford prolonged multi-cycle local photothermal therapy (PTT) due to the reduced diffusion of the nanorods to the surrounding tissues as a result of HA affinity toward cancer cells. The results show the promotion of immunostimulatory responses by both CCM and PTT through the release of inflammatory cytokines from immune cells, which allows localized and complete ablation of the breast tumor in an animal model by a single injection of the hydrogel. Moreover, the BiH renders strong antibacterial activity to the hydrogel, which is crucial for the clinical translation of injectable hydrogels as it minimizes the risk of infection in the post-cancer lesion formed by PTT-mediated cancer therapy.

Crosslinked zwitterionic microcapsules to overcome gastrointestinal barriers for oral insulin delivery

Oral insulin delivery has been extensively considered to achieve great patient compliance and convenience as well as favourable glucose homeostasis. However, its application is highly limited by the low insulin bioavailability owing to gastrointestinal barriers. Herein, we developed crosslinked zwitterionic microcapsules (CB-MCs@INS) based on a carboxyl betaine (CB)-modified poly(acryloyl carbonate-co-caprolactone) copolymer via the combination of microfluidics and UV-crosslinking to improve oral insulin delivery. CB-MC@INS microcapsules with high drug loading capacity (>40%) protected insulin from acid degradation in the harsh gastric environment. Through the introduction of CB-moieties, CB-MCs@INS possessed superior affinity for epithelial cells and improved insulin transport as compared to non-CB modified MCs@INS (5.15-fold), which was mainly attributed to the CB-mediated cell surface transporter via the PAT1 pathway. Moreover, the oral administration of CB-MCs@INS exhibited an excellent hypoglycaemic effect and maintained normoglycemia for up to 8 h in diabetic mice, demonstrating the great potential of crosslinked zwitterionic microcapsules as an oral insulin delivery platform for diabetes therapy.

A flow map for core/shell microdroplet formation in the co-flow Microchannel using ternary phase-field numerical model

Core/shell microdroplets formation with uniform size is investigated numerically in the co-flow microchannel. The interface and volume fraction contour between three immiscible fluids are captured using a ternary phase-field model. Previous research has shown that the effective parameters of microdroplet size are the physical properties and velocity of the three phases. By adjusting these variables, five main flow patterns are observed in numerical simulations. A core/shell dripping/slug regime is observed when the inertia of the continuous phase breaks the flow of the core and shell phases and makes a droplet. In the slug regime, the continuous phase has less inertia, and the droplets that form are surrounded by the channel walls, while in the dripping regime, the shell phase fluid is surrounded by the continuous phase. An increase in continuous-fluid or shell-fluid flow rate leads to dripping to a jetting transition. When three immiscible liquids flow continuously and parallel to one another without dispersing, this is known as laminar flow. In the tubing regime, the core phase flows continuously in the channel's central region, the shell phase flows in the annulus formed by the core phase's central region, and the continuous phase flows between the shell phase fluid and channel walls. In order to discriminate between the aforementioned flow patterns using Weber and Capillary numbers and establish regime transition criteria based on these two dimensionless variables, a flow regime map is provided. Finally, a correlation for shell thickness using shell-to-core phase velocity ratio and conducting 51 CFD simulations was proposed.

Recent Advances in Oral Peptide or Protein-Based Drug Liposomes

The high physiology and low toxicity of therapeutic peptides and proteins have made them a hot spot for drug development in recent years. However, their poor oral bioavailability and unstable metabolism make their clinical application difficult. The bilayer membrane of liposomes provides protection for the drug within the compartment, and their high biocompatibility makes the drug more easily absorbed by the body. However, phospholipids—which form the membranes—are subjected to various digestive enzymes and mucosal adhesion in the digestive tract and disintegrate before absorption. Improvements in the composition of liposomes or modifying their surface can enhance the stability of the liposomes in the gastrointestinal tract. This article reviews the basic strategies for liposome preparation and surface modification that promote the oral administration of therapeutic polypeptides.

An overview of oral insulin delivery strategies (OIDS)

Despite tremendous efforts, the world continues its fight against the common chronic disease-diabetes. Diabetes is caused by elevated glucose levels in the blood, which can lead to several complications like glaucoma, cataract, kidney failure, diabetic ketoacidosis, heart attack, and stroke. According to recent statistics, China, India, and the US rank at the top three positions with regards to the number of patients affected by diabetes. Ever since its discovery, insulin is one of the major therapeutic molecules that is used to control the disease in the diabetic population, worldwide. The most common route of insulin administration has been the subcutaneous route. However, the limitations associated with this route have motivated global efforts to explore alternative strategies to deliver insulin, including pulmonary, transdermal, nasal, rectal, buccal, and oral routes. Oral insulin delivery is the most convenient and patient-centered route. However, the oral route is also associated with numerous drawbacks that present significant challenges to the scientific fraternity. The human physiological system acts as a formidable barrier to insulin, limiting its bioavailability. The present review covers the major barriers against oral insulin delivery and explains formulation strategies that have been adopted to overcome these barriers. The review focuses on oral insulin delivery strategies (OIDS) for increasing the bioavailability of oral insulin, including nanoparticles, microparticles, nano-in-microparticles, hydrogels, tablets, capsules, intestinal patches, and use of ionic liquids. It also highlights some of the notable recent advancements and clinical trials in oral insulin delivery. This formulation based OIDS may significantly improve patient compliance in the treatment of diabetes.

Optimization of a Liposomal DNase I Formulation with an Extended Circulating Half-Life

Drug delivery systems such as liposomes are widely used to stabilize and increase the plasma half-life of therapeutics. In this article, we have investigated two strategies to increase the half-life of deoxyribonuclease I, an FDA-approved enzyme used for the treatment of cystic fibrosis, and a potential candidate for the reduction of uncontrolled inflammation induced by neutrophil extracellular traps. We demonstrate that our optimized preparation procedure resulted in nanoparticles with improved plasma half-life and total exposure relative to native protein, while maintaining enzymatic activity.

Versatile Oral Insulin Delivery Nanosystems: From Materials to Nanostructures

Diabetes is a chronic metabolic disease characterized by lack of insulin in the body leading to failure of blood glucose regulation. Diabetes patients usually need frequent insulin injections to maintain normal blood glucose levels, which is a painful administration manner. Long-term drug injection brings great physical and psychological burden to diabetic patients. In order to improve the adaptability of patients to use insulin and reduce the pain caused by injection, the development of oral insulin formulations is currently a hot and difficult topic in the field of medicine and pharmacy. Thus, oral insulin delivery is a promising and convenient administration method to relieve the patients. However, insulin as a peptide drug is prone to be degraded by digestive enzymes. In addition, insulin has strong hydrophilicity and large molecular weight and extremely low oral bioavailability. To solve these problems in clinical practice, the oral insulin delivery nanosystems were designed and constructed by rational combination of various nanomaterials and nanotechnology. Such oral nanosystems have the advantages of strong adaptability, small size, convenient processing, long-lasting pharmaceutical activity, and drug controlled-release, so it can effectively improve the oral bioavailability and efficacy of insulin. This review summarizes the basic principles and recent progress in oral delivery nanosystems for insulin, including physiological absorption barrier of oral insulin and the development of materials to nanostructures for oral insulin delivery nanosystems.

Liposomes as Tools to Improve Therapeutic Enzyme Performance

The drugs concept has changed during the last few decades, meaning the acceptance of not only low molecular weight entities but also macromolecules as bioagent constituents of pharmaceutics. This has opened a new era for a different class of molecules, namely proteins in general and enzymes in particular. The use of enzymes as therapeutics has posed new challenges in terms of delivery and the need for appropriate carrier systems. In this review, we will focus on enzymes with therapeutic properties and their applications, listing some that reached the pharmaceutical market. Problems associated with their clinical use and nanotechnological strategies to solve some of their drawbacks (i.e., immunogenic reactions and low circulation time) will be addressed. Drug delivery systems will be discussed, with special attention being paid to liposomes, the most well-studied and suitable nanosystem for enzyme delivery in vivo. Examples of liposomal enzymatic formulations under development will be described and successful pre-clinical results of two enzymes, L-Asparaginase and Superoxide dismutase, following their association with liposomes will be extensively discussed.

Advanced Microfluidic Technologies for Lipid Nano-Microsystems from Synthesis to Biological Application

Microfluidics is an emerging technology that can be employed as a powerful tool for designing lipid nano-microsized structures for biological applications. Those lipid structures can be used as carrying vehicles for a wide range of drugs and genetic materials. Microfluidic technology also allows the design of sustainable processes with less financial demand, while it can be scaled up using parallelization to increase production. From this perspective, this article reviews the recent advances in the synthesis of lipid-based nanostructures through microfluidics (liposomes, lipoplexes, lipid nanoparticles, core-shell nanoparticles, and biomimetic nanovesicles). Besides that, this review describes the recent microfluidic approaches to produce lipid micro-sized structures as giant unilamellar vesicles. New strategies are also described for the controlled release of the lipid payloads using microgels and droplet-based microfluidics. To address the importance of microfluidics for lipid-nanoparticle screening, an overview of how microfluidic systems can be used to mimic the cellular environment is also presented. Future trends and perspectives in designing novel nano and micro scales are also discussed herein.

Ice-Inspired Lubricated Drug Delivery Particles from Microfluidic Electrospray for Osteoarthritis Treatment

Particle-based drug delivery systems have a demonstrated value in osteoarthritis treatment. Research in this area trends to developing functional particles to improve the therapeutic effects. Herein, inspired by the super lubricated surface of ice that consists of a contiguous and ultrathin layer of bound water, we developed a 2-methylacryloyloxyethyl phosphorylcholine (MPC) decorated methacrylate anhydride- hyaluronic acid (HAMA) drug delivery particle with satisfying strength and enhanced lubrication from microfluidic electrospray for osteoarthritis treatment. Benefiting from the precise control of microfluidic electrospray flows, the generated drug delivery particles are imparted with well-tailored sizes and good dispersion. As the generated HAMA particles were modified by MPC with the positively (N⁺(CH₃)₃) and negatively (PO₄^-) charged chemical groups, they were imparted with enhanced lubrication effect and reduced friction on the joint interface by forming a hydrated lubricating layer. We have demonstrated that the MPC-modified HAMA particles could be employed as microcarriers for loading diclofenac sodium (DS) to inhibit the inflammatory response, thus further enhancing the osteoarthritis therapeutic effect in vivo and in vitro. Thus, the proposed drug delivery particles with satisfactory biocompatibility and therapeutic effect are great potential for clinical applications.

Solid Dosage Forms of Biopharmaceuticals in Drug Delivery Systems Using Sustainable Strategies

Drug delivery systems (DDS) often comprise biopharmaceuticals in aqueous form, making them susceptible to physical and chemical degradation, and therefore requiring low temperature storage in cold supply and distribution chains. Freeze-drying, spray-drying, and spray-freeze-drying are some of the techniques used to convert biopharmaceuticals-loaded DDS from aqueous to solid dosage forms. However, the risk exists that shear and heat stress during processing may provoke DDS damage and efficacy loss. Supercritical fluids (SCF), specifically, supercritical carbon dioxide (scCO₂), is a sustainable alternative to common techniques. Due to its moderately critical and tunable properties and thermodynamic behavior, scCO₂ has aroused scientific and industrial interest. Therefore, this article reviews scCO₂-based techniques used over the year in the production of solid biopharmaceutical dosage forms. Looking particularly at the use of scCO₂ in each of its potential roles—as a solvent, co-solvent, anti-solvent, or co-solute. It ends with a comparison between the compound’s stability using supercritical CO₂-assisted atomization/spray-drying and conventional drying.

Microfluidic preparation and in vitro evaluation of iRGD-functionalized solid lipid nanoparticles for targeted delivery of paclitaxel to tumor cells

Solid lipid nanoparticles (SLNs) can combine the advantages of different colloidal carriers and prevent some of their disadvantages. The production of nanoparticles by means of microfluidics represents a successful platform for industrial scale-up of nanoparticle manufacture in a reproducible way. The realisation of a microfluidic technique to obtain SLNs in a continuous and reproducible manner encouraged us to create surface functionalised SLNs for targeted drug release using the same procedure. A tumor homing peptide, iRGD, owning a cryptic C-end Rule (CendR) motif is responsible for neuropilin-1 (NRP-1) binding and for triggering extravasation and tumor penetration of the peptide. In this study, the Paclitaxel loaded-SLNs produced by microfluidics were functionalized with the iRGD peptide. The SLNs proved to be stable in aqueous medium andwere characterized by a Z-average under 150 nm, a polydispersity index below 0.2, a zeta-potential between -20 and -35 mV and a drug encapsulation efficiency around 40%. Moreover, in vitro cytotoxic effects and cellular uptake have been assessed using 2D and 3D tumour models of U87 glioblastoma cell lines. Overall, these results demonstrate that the surface functionalization of SLNs with iRGD allow better cellular uptake and cytotoxicity ability.

Liposomes for oral delivery of protein and peptide-based therapeutics: challenges, formulation strategies, and advances

Throughout the past decade, there has been a rapid growth in the development of protein/peptide-based therapeutics. These therapeutics have found widespread applications in the treatment of cancer, infectious diseases, and other metabolic disorders owing to their several desirable attributes, such as reduced toxicity, diverse biological activities, high specificity, and potency. Most protein/peptide-based drugs are still administered parenterally, and there is an unprecedented demand in the pharmaceutical industry to develop oral delivery routes to increase patient acceptability and convenience. Recent advancements in nanomedicine discoveries have led to the development of several nano and micro-particle-based oral delivery platforms for protein/peptide-based therapeutics and among these, liposomes have emerged as a prominent candidate. Liposomes are spherical vesicles composed of one or more phospholipid bilayers enclosing a core aqueous phase. Their unique amphiphilic nature enables encapsulation of a diverse range of bioactives/drugs including both hydrophobic and hydrophilic compounds for delivery. Against this backdrop, this review provides an overview of the current approaches and challenges associated with the routes and methods of oral administration of protein/peptide-based therapeutics by using liposomes as a potential vehicle. First, the conventional and innovative liposome formation approaches have been discussed along with their applications. Next, the challenges associated with current approaches for oral delivery of protein and peptide-derived therapeutics have been thoroughly addressed. Lastly, we have critically reviewed the potential of liposomes utilization as vehicles for oral delivery of proteins emphasizing the current status and future directions in this area.

Cheerios Effect Inspired Microbubbles as Suspended and Adhered Oral Delivery Systems

Oral drug administration has an important role in medical treatment. Attempts to develop drug microcarriers with desired features for extended duration and improved absorption is highly sought. Herein, inspired by the physical phenomenon of the Cheerios effect, a novel microfluidic electrospray microbubble carrier is presented that can suspend and actively adhere to the stomach for durable oral delivery. Compared with conventional fabrication methods, the present strategy shows stability and controllability of the product. Benefiting from their uniform hollow structure, the resultant microbubbles present the same behavior of the Cheerios and can float in the gastric juice, adhere and remain to the stomach wall, which thus enhance the duration and absorption of the loaded drugs. Based on these, it is demonstrated as a proof of concept that the dexamethasone-loaded hollow microbubbles can be applied to oral administration and remain suspended and adhered to the stomach of murine for more than 1 d, showing good therapeutic effect in treating lupus erythematosus. Thus, it is believed that the microbubbles floating system will find important values in long-term oral administration.

Nanocomposite systems for precise oral delivery of drugs and biologics

Oral delivery is considered the favoured route of administration for both local and systemic delivery of active molecules. Formulation of drugs in conventional systems and nanoparticles has provided opportunities for targeting the gastrointestinal (GI) tract, increasing drug solubility and bioavailability. Despite the achievements of these delivery approaches, the development of a product with the ability of delivering drug molecules at a specific site and according to patients' needs remains a challenging endeavour. The complexity of the physicochemical properties of colloidal systems, their stability in different regions of the gastrointestinal tract, and interaction with the restrictive biological barriers hampered their success for oral precise medicine. To overcome these issues, nanoparticles have been combined with polymers to create hybrid nanosystems, namely nanocomposites. They offer enormous possibilities of structural and mechanical modifications to both nanoparticles and polymeric matrixes to generate systems with new properties, functions, and applications for oral delivery. In this review, nanocomposites' physicochemical and functional properties intended to target specific regions of the GI tract-oral cavity, stomach, small bowel, and colon-are analysed. In parallel, it is provided an insight in the nanocomposite solutions for oral delivery intended for systemic and local absorption, together with a focus on inflammatory bowel diseases (IBDs). Additional difficulties in managing IBD related to the alteration in the physiology of the intestine are described. Finally, future perspectives and opportunities for advancement in this field are discussed.

Preparation of cetyl palmitate-based PEGylated solid lipid nanoparticles by microfluidic technique

In recent years, several studies have shown that the use of solid lipid nanoparticles (SLN) as a colloidal drug delivery system was more advantageous than lipid emulsions, liposomes and polymeric nanoparticles. SLNs have numerous advantages of different nanosystems and rule out many of their drawbacks. Despite the numerous advantages of SLNs, translation from the preclinical formulation to the industrial scale-up is limited. In order to provide a reproducible and reliable method of producing nanoparticles, and thus, obtain an industrial scale-up, several methods of synthesis of nanoparticles by microfluidic have been developed. Microfluidic technique allows a good control and a continuous online synthesis of nanosystems compared to synthesis in bulk, leading to a narrow size distribution, high batch-to-batch reproducibility, as well as to the industrial scale-up feasibility. This work described the optimization process to produce SLNs by microfluidics. The SLNs produced by microfluidics were characterized by complementary optical and morphological techniques and compared with those produced by bulk method. SLNs were loaded with paclitaxel and sorafenib, used as model drugs. The anti-cancer efficiency of the SLNs formulation was estimated with 2D and 3D tumour models of two different cell lines, and the cellular uptake was also studied with fluorescence-assisted measurements.

One-step microfluidics production of enzyme-loaded liposomes for the treatment of inflammatory diseases

The biopharmaceuticals market is constantly growing. Despite their advantages over the conventional drugs, biopharmaceuticals have short biological half-lifes, which can be increased using liposomes. However, the common bulk methods to produce biopharmaceuticals-loaded liposomes result in lost of encapsulation efficiency (E.E.), resulting in an expensive process. Herein, the encapsulation of a therapeutic enzyme in liposomes is proposed, using a glass-capillary microfluidic technique. Cu,Zn- Superoxide dismutase (SOD) is successfully encapsulated into liposomes (SOD@Liposomes). SOD@Liposomes with a mean size of 135 ± 41 nm, a polydispersity index of 0.13 ± 0.01, an E.E. of 59 ± 6 % and an enzyme activity of 82 ± 3 % are obtained. in vivo experiments show, through an ear edema model, that SOD@Liposomes administered by the intravenous route enable an edema inhibition of 65 % ± 8 %, over the 20 % ± 13 % of SOD in its free form. The histopathological analyses show a higher inflammatory cell accumulation on the ear treated with SOD in its free form, than treated with SOD@Liposomes. Overall, this work highlights the potential of microfluidics for the production of enzyme-loaded liposomes with high encapsulation efficiency, with the intrinsic advantages of the low time-consuming and easily upscaling microfluidic assembly method.

Nano and microscale delivery platforms for enhanced oral peptide/protein bioavailability

In recent years, peptide/protein drugs have attracted considerable attention owing to their superior targeting and therapeutic effect and fewer side effects compared with chemical drugs. Oral administration modality with enhanced patient compliance is increasingly being recognized as an ideal route for peptide/protein delivery. However, the limited permeation efficiency and low oral bioavailability of peptide/protein drugs significantly hinder therapeutic advances. To address these problems, various nano and microscale delivery platforms have been developed, which offer significant advantages in oral peptide/protein delivery. In this review, we briefly introduce the transport mechanisms of oral peptide/protein delivery and the primary barriers to this delivery process. We also highlight the recent advances in various nano and microscale delivery platforms designed for oral peptide/protein delivery. We then summarize the existing strategies used in these delivery platforms to improve the oral bioavailability and permeation efficiency of peptide/protein therapeutics. Finally, we discuss the major challenges faced when nano and microscale systems are used for oral peptide/protein delivery. This review is expected to provide critical insight into the design and development of oral peptide/protein delivery systems with significant therapeutic advances.