The application of a new recyclable photocatalyst γ-Fe2O3@SiO2@ZIF8-Ag in the photocatalytic degradation of amoxicillin in aqueous solutions

This pilot study synthesized the γ-Fe₂O₃@SiO₂@ZIF8-Ag nanocomposites via the hydrothermal method to study its potential use in amoxicillin degradation as a novel photocatalyst in aqueous solutions under visible light radiation. Various diagnostic methods were used to determine the morphology and functional structure of the photocatalyst, and the results confirmed its proper formation. Complete degradation of AMX was obtained at a pH of 5, catalyst dosage of 0.4 g/L, AMX concentration of 10 mg/L, and reaction time of 60 min. The efficiency of the degradation was diminished when anions were present in the reaction medium, and the order of their effect was SO₄^2- < Cl^- < NO₃^- < HCO₃^-. Biodegradability (BOD₅/COD ratio) increased from 0.20 to 0.68 after 120 min of photocatalytic treatment, with a COD removal of 87.54% and a TOC removal of 74.88%. Through the experimental trapping of electrons, we found the production of reactive species, such as hydroxyl radical (•OH), superoxide (O₂^•-), and holes (h⁺), in the photocatalysis reactor and that •OH was the predominant species in AMX photodegradation. Comparative experiments emphasized that the oxidation process occurs with the adsorption of pollutants on the surface of the catalyst, and the photocatalyst has the potential to be activated by various light sources, including visible light, UV light, and sunlight, with an AMX decomposition above 88%. The synthesized particles can be recovered after five consecutive cycles with minimal reduction in the degradation rate (< 4%). γ-Fe₂O₃@SiO₂@ZIF8-Ag can be considered a promising photocatalyst for use in AMX degradation due to its recyclability, easier activation by different light sources, and excellent mineralization.

Banana-peel-derived magnetic porous carbon as effective adsorbent for the enrichment of six bisphenols from beverage and water samples

Functionalized magnetic nanoporous carbon derived from banana peel was synthesized through carbonization, porogenesis, carboxylation and magnetization using banana peel and was successfully used as a magnetic solid phase extraction (MSPE) material for the enrichment of six bisphenols (BPs) from beverage and water samples. After the optimization of MSPE process, the enrichment factors of six target analytes were in the range of 74-112 for water samples, and 15-22 for beverage samples. Then, high-performance liquid chromatography-quadrupole-Orbitrap high-resolution mass spectrometry (HPLC-Q Orbitrap-HRMS) was used for the separation and determination of the target analytes. Results showed that the extraction recoveries for 6 BPs were in the range of 71.9-108.4% with an RSD of 2.5-7.5% (n = 6). These results demonstrated that the as-prepared material could efficiently enrich some aromatic compounds and the proposed method is reliable and robust for the determination of BPs in water and beverage samples.

Preparation of Silicone Emulsion Defoamer with Easy Separation of Magnetic Hydrophobic Nanoparticles

To prepare lyophobic magnetic nanoparticles (LMNs) with core/shell structure to be applied in silicone emulsion defoamer, magnetic nanoparticles covered with silica (MNS) were prepared in a one-step process from FeCl3 · 6H2O, FeCl2 · 4H2O and tetraethyl orthosilicate and then modified with poly (methylhydrosiloxane). X-ray powder diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscope (FTIR), thermogravimetric analysis (TGA), and contact angle tests were performed to characterize the nano-particles, and the droplets of the defoamer emulsion were observed with a microscope. The foam breaking and foam inhibition properties of the defoamer and the magnetic separation of the particles were observed and recorded by a camera. It was found that the silicone emulsion defoamer exhibited good foam breaking and foam inhibition properties for foaming systems with anionic, cationic and non-ionic surfactants, respectively. The solid particles in the defoamer could be easily separated from the defoamed systems by a magnet.

A new approach based on inversion of a partial least squares model searching for a preset analytical target profile. Application to the determination of five bisphenols by liquid chromatography with diode array detector

The paper shows a procedure for selecting the control method parameters (factors) to obtain a preset 'analytical target profile' when a liquid chromatographic technique is going to be carried out for the simultaneous determination of five bisphenols (bisphenol-A, bisphenol-S, bisphenol-F, bisphenol-Z and bisphenol-AF), some of them regulated by the European Union. The procedure has three steps. The first consists of building a D-optimal combined design (mixture-process design) for the control method parameters, which are the composition of the ternary mobile phase and its flow rate. The second step is to fit a PLS2 model to predict six analytical responses (namely, the resolution between each pair of consecutive peaks, and the initial and final chromatographic time) as a function of the control method parameters. The third final step is the inversion of the PLS2 model to obtain the conditions needed for attaining a preset analytical target profile. The computational inversion of the PLS2 prediction model looking for the Pareto front of these six responses provides a set of experimental conditions to conduct the chromatographic determination, specifically 22% of water, mixed with 58% methanol and 20% of acetonitrile, keeping the flow rate at 0.66 mL min^-1. These conditions give a chromatogram with retention times of 2.180, 2.452, 2.764, 3.249 and 3.775 min for BPS, BPF, BPA, BPAF and BPZ, respectively, and excellent resolution among all the chromatographic peaks. Finally, the analytical method is validated under the selected experimental conditions, in terms of trueness and precision. In addition, the detection capability for the five bisphenols were: 596, 334, 424, 458 and 1156 μg L^-1, with probabilities of false positive and of false negative equal to 0.05.

Synthesis of Magnetic Metal-Organic Frame Material and Its Application in Food Sample Preparation

A variety of contaminants in food is an important aspect affecting food safety. Due to the presence of its trace amounts and the complexity of food matrix, it is very difficult to effectively separate and accurately detect them. The magnetic metal-organic framework (MMOF) composites with different structures and functions provide a new choice for the purification of food matrix and enrichment of trace targets, thus providing a new direction for the development of new technologies in food safety detection with high sensitivity and efficiency. The MOF materials composed of inorganic subunits and organic ligands have the advantages of regular pore structure, large specific surface area and good stability, which have been thoroughly studied in the pretreatment of complex food samples. MMOF materials combined different MOF materials with various magnetic nanoparticles, adding magnetic characteristics to the advantages of MOF materials, which are in terms of material selectivity, biocompatibility, easy operation and repeatability. Combined with solid phase extraction (SPE) technique, MMOF materials have been widely used in the food pretreatment. This article introduced the new preparation strategies of different MMOF materials, systematically summarizes their applications as SPE adsorbents in the pretreatment of food contaminants and analyzes and prospects their future application prospects and development directions.

Determination of bisphenol A: Old problem, recent creative solutions based on novel materials

Bisphenol A is a synthetic compound widely used in industry, in the production of polycarbonate, epoxy resins, and thermal paper, among others. Its annual production is estimated at millions of tons per year, demonstrating its importance. Despite its wide application in various everyday products, once in the environment (due to its disposal or leaching), it has high toxicity to humans and animal life, and this problem has been well known for years. Given this problem, many researchers seek alternatives for its monitoring in matrices such as natural water, waste, food, and biological matrices. For this, new advanced materials have been developed, characterized, and applied in creative ways for the preparation of samples for the determination of bisphenol A. This article aims to present some of these important and recent applications, describing the use of molecularly imprinted polymers, metal and covalent organic frameworks, ionic liquids and magnetic ionic liquids, and deep eutectic solvents as creative solutions in sample preparation for the long-standing problem of bisphenol A determination.

Aptamer-enhanced fluorescence determination of bisphenol A after magnetic solid-phase extraction using Fe3O4@SiO2@aptamer

Bisphenol A (BPA) is used as a stabilizing agent in many food packaging plastics and is a known endocrine-disrupting chemical that can alter the development of mammary glands, affect egg cells, and cause chromosomal defects. However, the pretreatment of traditional assays for detecting BPA is difficult. In this work, a novel aptamer functionalized magnetic adsorbent was developed and combined with magnetic solid-phase extraction (MSPE) for the selective enrichment of BPA. First, magnetic silica-coated Fe₃O₄ microspheres (Fe₃O₄@SiO₂) were synthesized by the sol-gel method, and functional magnetic nanoparticles (Fe₃O₄@SiO₂@Apt) were formed by modifying with nucleic acids. In the presence of BPA in a MSPE system, the nucleic acid aptamer can specifically capture the target BPA. After magnetic separation, the Apt/BPA composite was eluted, and we observed enhanced fluorescence with the Apt/BPA composite that was formed. Our results showed that this method allowed a limit of detection of 0.05 ng mL^-1.

Batch and fixed-bed column adsorption of tetrabromobisphenol A onto metal organic resin: equilibrium, kinetic and mechanism studies

MORs were prepared through fabricating MOFs and resin for effective TBBPA removal in fix-bed column experiments from contaminated waters.