Partially oxidized mackinawite/biochar for photo-Fenton organic contaminant removal: Synergistically improve interfacial electron transfer and H2O2 activation

Immobilizing Fe-based nanoparticles on electron-rich biochar has becoming an attractive heterogeneous Fenton-like catalysts (Fe/BC) for wastewater decontamination. However, the insufficient graphitization of biochar causing low electron transfer and by slow H2O2 activation limited its application. Herein, we firstly constructed FeS/biochar composite through all-solid molten salt method (Fe/MSBCs), which can provide strong polarization force and liquid reaction environment to improve carbonization. As expected, the obtained Fe/MSBCs exhibits high surface area and fast interfacial electron transfer between FeS and biochar. More importantly, the partially oxidized FeS (001) facet facilitate H2O2 adsorption and thermodynamically easily decomposition into •OH. Such a synergistic effect endowed them excellent photo-Fenton degradation performance for methyl orange (MO) with large kinetic rate constants (0.079 min-1) and high H2O2 utilization efficiency (95.9%). This study first demonstrated the critical regulatory role of molten salt method in iron-based biochar composites, which provide an alternative for H2O2 activator in water pollutant control.

Preparation of novel and recyclable chitosan-alumina nanocomposite as superabsorbent to remove diazinon and tetracycline contaminants from aqueous solution

This work presents a novel, strong and efficient adsorbent (CS@TDI@EDTA@γ-AlO(OH)) prepared through the green process using three components, chitosan, BNPs and EDTA using amide and ester bridges. An eco-friendly and easy approach was used for the preparation of this novel adsorbent, the low cost, easy access to the used materials, and the simplicity of the preparation method are some of the interesting advantages of this work. Also, this prepared adsorbent was used as an adsorbent to remove diazinon organophosphate poison and tetracycline antibiotic from aqueous solutions. In order to confirm the prepared adsorbent structure, the CS@TDI@EDTA@γ-AlO(OH) composite was investigated by various analyses including FT-IR, EDX, XRD, FESEM and TGA. The adsorption behavior of the adsorbent prepared for the removal of tetracycline and diazinon was investigated under different conditions by varying the concentration, temperature, the adsorbent dose, pH and contact time. Based on various tests, the highest diazinon adsorption capacity was obtained for 0.12 g/L adsorbent at pH 7 and 60 °C with 40 mg/L initial concentration. Also, the maximum adsorption capacity of the tetracycline was obtained for 0.12 g/L adsorbent at pH 9 and 60 °C with 30 mg/L initial concentration. The equilibrium results for diazinon and for tetracycline were in good accordance with the Langmuir and Freundlich isotherm models, respectively. Also, the highest adsorption capacities for diazinon at pH 7 and tetracycline at pH 9 were 1428.5 and 555.5 mg/g, respectively. Also the kinetic investigations revealed that the correlation factor (R2) of pseudo-second-order model obtained for the adsorption of diazinon and tetracycline was 0.9986 and 0.9988, while the coefficient k (g/mg.min) was 0.000084 and 0.0033, respectively. These results indicate that the adsorption of diazinon and tetracycline is pseudo-second-order kinetics model. Formation of hydrogen bonds between adsorbate and adsorbent as well as the high specific surface area and porosity of the adsorbent are the main mechanisms that contribute to the adsorption process. In addition, thermodynamic studies indicated that the adsorption of diazinon and tetracycline is a spontaneous endothermic process. The adsorbent prepared in this work was expected to have wide range of applications in wastewater treatment thanks to its good reusability in water and strong removal of diazinon and tetracycline compared to other adsorbents.

Design strategies and mechanisms of g-C3N4-based photoanodes for photoelectrocatalytic degradation of organic pollutants in water

Emerging photoelectrocatalytic (PEC) systems integrate the advantages of photocatalysis and electrocatalysis and are considered as a promising technology for solving the global organic pollution problem in water environments. Among the photoelectrocatalytic materials applied for organic pollutant degradation, graphitic carbon nitride (CN) has the combined advantages of environmental compatibility, stability, low cost, and visible light response. However, pristine CN has disadvantages such as low specific surface area, low electrical conductivity, and high charge complexation rate, and how to improve the degradation efficiency of PEC reaction and the mineralization rate of organic matter is the main problem faced in this field. Therefore, this paper reviews the progress of various functionalized CN used for PEC reaction in recent years, and the degradation efficiency of these CN-based materials is critically evaluated. First, the basic principles of PEC degradation of organic pollutants are outlined. Then, engineering strategies to enhance the PEC activity of CN (including morphology control, elemental doping, and heterojunction construction) are focused on, and the structure-activity relationships between these engineering strategies and PEC activity are discussed. In addition, the important role of influencing factors on the PEC system is summarized in terms of mechanism, to provide guidance for the subsequent research. Finally, suggestions and perspectives are provided for the preparation of efficient and stable CN-based photoelectrocatalysts for practical wastewater treatment applications.

Scavenging of Organic Pollutant and Fuel Generation through Cost-Effective and Abundantly Accessible Rust: A Theoretical Support with DFT Simulations

Waste management and energy generation are the foremost concerns due to their direct relationship with biological species and the environment. Herein, we report the utilization of iron rust (inorganic pollutant) as a photocatalyst for the photodegradation of methylene blue (MB) dye (organic pollutant) under visible light (economic) and water oxidation (energy generation). Iron rust was collected from metallic pipes and calcined in the furnace at 700 °C for 3 h to remove the moisture/volatile content. The uncalcined and calcined rust NPs are characterized through scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier-transform infrared (FTIR) analysis, X-ray Diffraction (XRD), and thermogravimetric analysis (TGA). The morphological study illustrated that the shape of uncalcined and calcined iron rust is spongy, porous, and agglomerated. The XRD and DLS particle sizes are in a few hundred nanometers range. The photodegradation (PD) investigation shows that calcined rust NPs are potent for the PD of modeled MB, and the degradation efficiency was about 94% in a very short time of 11 min. The photoelectrochemical (PEC) measurements revealed that calcined rust NPs are more active than uncalcined rust under simulated 1 SUN illumination with the respective photocurrent densities of ~0.40 and ~0.32 mA/cm². The density functional theory simulations show the chemisorption of dye molecules over the catalyst surface, which evinces the high catalytic activity of the catalyst. These results demonstrate that cheaper and abundantly available rust can be useful for environmental and energy applications.

Glycerol Is Converted into Energy and Carbonyl Compounds in a 3D-Printed Microfluidic Fuel Cell: In Situ and In Operando Bi-Modified Pt Anodes

The combination of energy and chemical conversion can be achieved by designing glycerol fuel cells. However, the anode must promote the reaction at onset potentials low enough to allow a spontaneous reaction, when coupled to the cathodic reaction, and must be selective. Here, we build a three-dimensional (3D)-printed glycerol microfluidic fuel cell that produces power concomitantly to glycolate and formate at zero bias. The balance between energy and the two carbonyl compounds is tuned by decorating the Pt/C/CP anode in situ (before feeding the cell reactants) or in operando (while feeding the cell with reactants) with Bi. The Bi-modified anodes improve glycerol conversion and output power while decreasing the formation of the carbonyl compounds. The in operando method builds dendrites of rodlike Bi oxides that are inactive for the anodic reaction and cover active sites. The in situ strategy promotes homogeneous Bi decoration, decreasing activation losses, increasing the open-circuit voltage to 1.0 V, and augmenting maximum power density 6.5 times and the glycerol conversion to 72% at 25 °C while producing 0.2 mmoL L^-1 of glycolate and formate (each) at 100 μL min^-1. Such a performance is attributed to the low CO poisoning of the anode, which leads the glycerol electrooxidation toward a more complete reaction, harvesting more electrons at the device. Printing the microfluidic fuel cell takes 23 min and costs ∼US$1.85 and can be used for other coupled reactions since the methods of modification presented here are applied to any existing and assembled systems.

Fabrication of g-C3N4/Bi2WO6 as a direct Z-scheme excellent photocatalyst

To improve the photocatalytic efficiency of Bi2WO6, two types of g-C3N4 nanomaterial, g-C3N4 quantum dots and nanosheets, were incorporated with Bi2WO6 to construct two kinds of g-C3N4/Bi2WO6 photocatalysts with excellent photocatalytic activity.

Modulating photoelectrochemical water splitting performance by constructing a type-II heterojunction between g-C3N4 and BiOI

g-C₃N₄/BiOI type-II heterojunction prepared by ultrasonically aided hydrothermal method exhibits high stability during PEC water splitting for up to 6000 s at 1.23 V vs. RHE.