Valorization of Lactate Esters and Amides into Value-Added Biobased (Meth)acrylic Polymers

(Meth)acrylic polymers are massively produced due to their inherently attractive properties. However, the vast majority of these polymers are derived from fossil resources, which is not aligned with the tendency to reduce gas emissions. In this context, (meth)acrylic polymers derived from biomass (biobased polymers) are gaining momentum, as their application in different areas can not only stand the comparison but even surpass, in some cases, the performance of petroleum-derived ones. In this review, we highlight the design and synthesis of (meth)acrylic polymers derived from lactate esters (LEs) and lactate amides (LAs), both derived from lactic acid. While biobased polymers have been widely studied and reviewed, the poly(meth)acrylates with pendant LE and LA moieties evolved slowly until recently when significant achievements have been made. Hence, constraints and opportunities arising from previous research in this area are presented, focusing on the synthesis of well-defined polymers for the preparation of advanced materials.

New Advances in Covalent Network Polymers via Dynamic Covalent Chemistry

Covalent network polymers, as materials composed of atoms interconnected by covalent bonds in a continuous network, are known for their thermal and chemical stability. Over the past two decades, these materials have undergone significant transformations, gaining properties such as malleability, environmental responsiveness, recyclability, crystallinity, and customizable porosity, enabled by the development and integration of dynamic covalent chemistry (DCvC). In this review, we explore the innovative realm of covalent network polymers by focusing on the recent advances achieved through the application of DCvC. We start by examining the history and fundamental principles of DCvC, detailing its inception and core concepts and noting its key role in reversible covalent bond formation. Then the reprocessability of covalent network polymers enabled by DCvC is thoroughly discussed, starting from the significant milestones that marked the evolution of these polymers and progressing to their current trends and applications. The influence of DCvC on the crystallinity of covalent network polymers is then reviewed, covering their bond diversity, synthesis techniques, and functionalities. In the concluding section, we address the current challenges faced in the field of covalent network polymers and speculates on potential future directions.

Improvements in the Production of Isosorbide Monomethacrylate Using a Biobased Catalyst and Liquid-Liquid Extraction Isolation for Modifications of Oil-Based Resins

The improved production of a polar curable monomer, isosorbide monomethacrylate (MISD), with methacrylic anhydride (MAAH) as an acyl donor, was performed. A sustainable and cheap catalyst, potassium acetate (CH3COOK), was used for a solvent-free synthesis, requiring only the equimolar amount of reagents (no excess). The production included the quantitative separation of the secondary product, methacrylic acid (MAA), preventing the reaction batch from the purification process (neutralization of MAA), and gaining a usable reagent. The synthesis resulted in a sufficient yield of MISD (61.8%) obtained by the liquid-liquid extraction process (LLE), which is a significant improvement in the process, avoiding the flash chromatography step in the isolation of MISD. The purity of synthesized and isolated MISD via the LLE was confirmed by 1H NMR, MS, and FTIR analyses. The thermal analyses, namely, DSC and TGA, were used to characterize the curability and thermal stability of MISD. The activation energy of MISD's curing was calculated (E a = 94.6 kJ/mol) along with the heat-resistant index (T s = 136.8). The polar character of isosorbide monomethacrylate was investigated in a mixture with epoxidized acrylated soybean oil (EASO). It was found that MISD is entirely soluble in EASO and can modify the rheological behavior and surface energy of EASO-based resins. The apparent viscosity of EASO at 30 °C (ηapp = 3413 mPa·s) decreased with the 50% content of MISD significantly (ηapp = 500 mPa·s), and the free surface energy value of EASO (γS = 42.2 mJ/m2) also increased with the 50% content of MISD (γS = 48.7 mJ/m2). The produced MISD can be successfully used as a diluent and the polarity modifier of curable oil-based resins.

Process Intensification of the Continuous Synthesis of Bio-Derived Monomers for Sustainable Coatings Using a Taylor Vortex Flow Reactor

We describe the optimization and scale-up of two consecutive reaction steps in the synthesis of bio-derived alkoxybutenolide monomers that have been reported as potential replacements for acrylate-based coatings (Sci. Adv.2020, 6, eabe0026). These monomers are synthesized by (i) oxidation of furfural with photogenerated singlet oxygen followed by (ii) thermal condensation of the desired 5-hydroxyfuranone intermediate product with an alcohol, a step which until now has involved a lengthy batch reaction. The two steps have been successfully telescoped into a single kilogram-scale process without any need to isolate the 5-hydroxyfuranone between the steps. Our process development involved FTIR reaction monitoring, FTIR data analysis via 2D visualization, and two different photoreactors: (i) a semicontinuous photoreactor based on a modified rotary evaporator, where FTIR and 2D correlation spectroscopy (2D-COS) revealed the loss of the methyl formate coproduct, and (ii) our fully continuous Taylor Vortex photoreactor, which enhanced the mass transfer and permitted the use of near-stoichiometric equivalents of O2. The use of in-line FTIR monitoring and modeling greatly accelerated process optimization in the Vortex reactor. This led to scale-up of the photo-oxidation in 85% yield with a projected productivity of 1.3 kg day-1 and a space-time yield of 0.06 mol day-1 mL-1. Higher productivities could be achieved while sacrificing yield (e.g., 4 kg day-1 at 40% yield). The use of superheated methanol at 200 °C in a pressurized thermal flow reactor accelerated the second step, the thermal condensation of 5-hydroxyfuranone, from a 20 h batch reflux reaction (0.5 L, 85 g) to a space time of <1 min in a reactor only 3 mL in volume operating with projected productivities of >700 g day-1. Proof of concept for telescoping the two steps was established with an overall two-step yield of 67%, producing a process with a projected productivity of 1.1 kg day-1 for the methoxybutenolide monomer without any purification of the 5-hydroxyfuranone intermediate.

Improving the Performance of Photoactive Terpene-Based Resin Formulations for Light-Based Additive Manufacturing

Photocurable liquid formulations have been a key research focus for the preparation of mechanically robust and thermally stable networks. However, the development of renewable resins to replace petroleum-based commodities presents a great challenge in the field. From this perspective, we disclose the design of photoactive resins based on terpenes and itaconic acid, both potentially naturally sourced, to prepare photosets with adjustable thermomechanical properties. Biobased perillyl itaconate (PerIt) was synthesized from renewable perillyl alcohol and itaconic anhydride via a scalable solvent-free method. Photoirradiation of PerIt in the presence of a multiarm thiol and photoinitiator led to the formation of networks over a range of compositions. Addition of nonmodified terpenes (perillyl alcohol, linalool, or limonene) as reactive diluents allowed for more facile preparation of photocured networks. Photosets within a wide range of properties were accessed, and these could be adjusted by varying diluent type and thiol stoichiometry. The resins showed rapid photocuring kinetics and the ability to form either brittle or elastic materials, with Young's modulus and strain at break ranging from 3.6 to 358 MPa and 15 to 367%, respectively, depending on the chemical composition of the resin. Glass transition temperatures (Tg) were influenced by thioether content, with temperatures ranging from 5 to 43 °C, and all photosets displayed good thermal resistance with Td,5% > 190 °C. Selected formulations containing PerIt and limonene demonstrated suitability for additive manufacturing technologies and high-resolution objects were printed via digital light processing (DLP). Overall, this work presents a simple and straightforward route to prepare renewable resins for rapid prototyping applications.

Improving the 3D Printability and Mechanical Performance of Biorenewable Soybean Oil-Based Photocurable Resins

The general requirement of replacing petroleum-derived plastics with renewable resources is particularly challenging for new technologies such as the additive manufacturing of photocurable resins. In this work, the influence of mono- and bifunctional reactive diluents on the printability and performance of resins based on acrylated epoxidized soybean oil (AESO) was explored. Polyethylene glycol di(meth)acrylates of different molecular weights were selected as diluents based on the viscosity and mechanical properties of their binary mixtures with AESO. Ternary mixtures containing 60% AESO, polyethylene glycol diacrylate (PEGDA) and polyethyleneglycol dimethacrylate (PEG200DMA) further improved the mechanical properties, water resistance and printability of the resin. Specifically, the terpolymer AESO/PEG575/PEG200DMA 60/20/20 (wt.%) improved the modulus (16% increase), tensile strength (63% increase) and %deformation at the break (21% increase), with respect to pure AESO. The enhancement of the printability provided by the reactive diluents was proven by Jacobs working curves and the improved accuracy of printed patterns. The proposed formulation, with a biorenewable carbon content of 67%, can be used as the matrix of innovative resins with unrestricted applicability in the electronics and biomedical fields. However, much effort must be done to increase the array of bio-based raw materials.

Methanol bioconversion into C3, C4, and C5 platform chemicals by the yeast Ogataea polymorpha

BACKGROUND

One carbon (C1) molecules such as methanol have the potential to become sustainable feedstocks for biotechnological processes, as they can be derived from CO2 and green hydrogen, without the need for arable land. Therefore, we investigated the suitability of the methylotrophic yeast Ogataea polymorpha as a potential production organism for platform chemicals derived from methanol. We selected acetone, malate, and isoprene as industrially relevant products to demonstrate the production of compounds with 3, 4, or 5 carbon atoms, respectively.

RESULTS

We successfully engineered O. polymorpha for the production of all three molecules and demonstrated their production using methanol as carbon source. We showed that the metabolism of O. polymorpha is well suited to produce malate as a product and demonstrated that the introduction of an efficient malate transporter is essential for malate production from methanol. Through optimization of the cultivation conditions in shake flasks, which included pH regulation and constant substrate feeding, we were able to achieve a maximum titer of 13 g/L malate with a production rate of 3.3 g/L/d using methanol as carbon source. We further demonstrated the production of acetone and isoprene as additional heterologous products in O. polymorpha, with maximum titers of 13.6 mg/L and 4.4 mg/L, respectively.

CONCLUSION

These findings highlight how O. polymorpha has the potential to be applied as a versatile cell factory and contribute to the limited knowledge on how methylotrophic yeasts can be used for the production of low molecular weight biochemicals from methanol. Thus, this study can serve as a point of reference for future metabolic engineering in O. polymorpha and process optimization efforts to boost the production of platform chemicals from renewable C1 carbon sources.

Temperature-Responsive Lactic Acid-Based Nanoparticles by RAFT-Mediated Polymerization-Induced Self-Assembly in Water

This work demonstrates for the first-time biobased, temperature-responsive diblock copolymer nanoparticles synthesized by reversible addition-fragmentation chain-transfer (RAFT) aqueous emulsion polymerization-induced self-assembly (PISA). Here, monomers derived from green solvents of the lactic acid portfolio, N,N-dimethyl lactamide acrylate (DMLA) and ethyl lactate acrylate (ELA), were used. First, DMLA was polymerized by RAFT aqueous solution polymerization to produce a hydrophilic PDMLA macromolecular chain transfer agent (macro-CTA), which was chain extended with ELA in water to form amphiphilic PDMLA-b-PELA diblock copolymer nanoparticles by RAFT aqueous emulsion polymerization. PDMLA_x homopolymers were synthesized targeting degrees of polymerization, DP_x from 25 to 400, with relatively narrow molecular weight dispersities (Đ < 1.30). The PDMLA₆₄-b-PELA_y diblock copolymers (DP_y = 10-400) achieved dispersities, Đ, between 1.18 and 1.54 with two distinct glass transition temperatures (T_g) identified by differential scanning calorimetry (DSC). T_g(1) (7.4 to 15.7 °C) representative of PELA and T_g(2) (69.1 to 79.7 °C) of PDMLA. Dynamic light scattering (DLS) studies gave particle z-average diameters between 11 and 74 nm (PDI = 0.04 to 0.20). Atomic force microscopy (AFM) showed evidence of spherical particles when dispersions were dried at ∼5 °C and film formation when dried at room temperature. Many of these polymers exhibited a reversible lower critical solution temperature (LCST) in water with a concomitant increase in z-average diameter for the PDMLA-b-PELA diblock copolymer nanoparticles.

Polymer Colloids: Current Challenges, Emerging Applications, and New Developments

Polymer colloids are complex materials that have the potential to be used in a vast array of applications. One of the main reasons for their continued growth in commercial use is the water-based emulsion polymerization process through which they are generally synthesized. This technique is not only highly efficient from an industrial point of view but also extremely versatile and permits the large-scale production of colloidal particles with controllable properties. In this perspective, we seek to highlight the central challenges in the synthesis and use of polymer colloids, with respect to both existing and emerging applications. We first address the challenges in the current production and application of polymer colloids, with a particular focus on the transition toward sustainable feedstocks and reduced environmental impact in their primary commercial applications. Later, we highlight the features that allow novel polymer colloids to be designed and applied in emerging application areas. Finally, we present recent approaches that have used the unique colloidal nature in unconventional processing techniques.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Biobased Transesterification Vitrimers

The rapid increase in the use of plastics and the related sustainability issues, including the depletion of global petroleum reserves, have rightly sparked interest in the use of biobased polymer feedstocks. Thermosets cannot be remolded, processed, or recycled, and hence cannot be reused because of their permanent molecular architecture. Vitrimers have emerged as a novel polymer family capable of bridging the difference between thermoplastic and thermosets. Vitrimers enable unique recycling strategies, however, it is still important to understand where the raw material feedstocks originate from. Transesterification vitrimers derived from renewable resources are a massive opportunity, however, limited research has been conducted in this specific family of vitrimers. This review article provides a comprehensive overview of transesterification vitrimers produced from biobased monomers. The focus is on the biomass structural suitability with dynamic covalent chemistry, as well as the viability of the synthetic methods.

Hydrophilic bio-based polymers by radical copolymerization of cyclic vinyl ethers derived from glycerol

In this study, novel functional polymers were obtained by using glycerol as a bio-based precursor, which is abundant and inexpensive renewable feedstock with a polyol skeleton. Cyclic vinyl ethers with acetal linkage were derived from glycerol to yield well-defined copolymers by reversible addition-fragmentation chain transfer (RAFT) radical copolymerization with common vinyl monomers. The resulting acetal-containing copolymers could be hydrolyzed under acidic conditions to afford water-soluble functional polymers with pendent diols.

Photoinduced Iron-Catalyzed ATRP of Renewable Monomers in Low-Toxicity Solvents: A Greener Approach

Producing polymers from renewable resources via more sustainable approaches has become increasingly important. Herein we present the polymerization of monomers obtained from biobased renewable resources, employing an environmentally friendly photoinduced iron-catalyzed atom transfer radical polymerization (ATRP) in low-toxicity solvents. We demonstrate that renewable monomers can be successfully polymerized into sustainable polymers with controlled molecular weights and narrow molar mass distributions (Đ as low as 1.17). This is in contrast to reversible addition-fragmentation chain-transfer (RAFT) polymerization, arguably the most commonly employed method to polymerize biobased monomers, which led to poorer molecular weight control and higher dispersities for these specific monomers (Đs ∼ 1.4). The versatility of our approach was further highlighted by the temporal control demonstrated through intermittent "on/off" cycles, controlled polymerizations of a variety of monomers and chain lengths, oxygen-tolerance, and high end-group fidelity exemplified by the synthesis of block copolymers. This work highlights photoinduced iron-catalyzed ATRP as a powerful tool for the synthesis of renewable polymers.

Sustainable Polymers: Our Evolving Understanding

ConspectusThis Account discusses the evolution of our strategy to conduct environmentally responsible research in the field of polymer chemistry. To contextualize our work, we begin with a broad historical overview of the modern environmental movement, the rise of sustainability as a concept, and how chemistry has responded to these forces, which were often sharply critical of our field. We then trace our own responses, from graduate school onward, chronicling a series of experiences and research projects that molded, challenged, and reshaped how we think about sustainability in polymer science.Since beginning our independent careers in 2004, we have recognized and worked to resolve the tension between designing synthetic polymers for specific desired thermomechanical properties and minimizing environmental impact. In our early years, we were most strongly guided by the 12 Principles of Green Chemistry (12PGC), which had only recently been proposed. The authors' early research agendas had a rather narrow focus on two areas, specifically catalysis and biobased monomers, which we saw as strongly linked to sustainability. Over time, we found these areas to be too narrow in their focus, ignoring important considerations such as the capacity of monomer supply to support scale-up and the impact polymers have at the end of their usage lifetimes. With respect to monomers and catalysts, we consider descriptive metrics that quantify waste production and the toxicity of compounds used during synthesis. In terms of polymer end-of-life, we discuss hydrophobicity as a tool to help understand susceptibility to degradation in the environment as well as some of the concerns with design for degradation, a critical component of 12PGC.Now, after nearly two decades of investigation, we believe that achieving sustainability in polymer science will require us to move beyond the qualitative use of the 12PGC to a portfolio of metrics. We note a heartening increase in the availability and use of such metrics and tools across the field. These include items that provide limited insight but are relatively trivial to integrate into existing workflows such as E factor or the Toxicity Estimation Software Tool. We also appreciate the increased use of Life Cycle Assessment (LCA), which is both dramatically more thorough and difficult to deploy. Finally, we propose the creation of a national LCA center, similar to instrumental core facilities. Such a resource would enable the use of this tool across multiple phases of research and we hope would more effectively guide us to a sustainable future.

On the photopolymerization of mevalonic lactone methacrylate: exposing the potential of an overlooked monomer

This manuscript will exhibit the photopolymerization of mevalonic lactone methacrylate, an overlooked monomer, and how functional polymers with lactone pendant units can be synthesized.

Diverse chemically recyclable polymers obtained by cationic vinyl and ring-opening polymerizations of the cyclic ketene acetal ester “dehydroaspirin”

Chemically recyclable polymers composed of carbon and/or ester backbones were prepared by vinyl and ring-opening polymerizations of a cyclic ketene acetal ester.

Acrylate and Methacrylate Polymers' Applications: Second Life with Inexpensive and Sustainable Recycling Approaches

Polymers are widely employed in several fields thanks to their wide versatility and the easy derivatization routes. However, a wide range of commercial polymers suffer from limited use on a large scale due to their inert nature. Nowadays, acrylate and methacrylate polymers, which are respectively derivatives of acrylic or methacrylic acid, are among the most proposed materials for their useful characteristics like good biocompatibility, capping ability toward metal clusters, low price, potentially recyclability and reusability. Here, we discuss the advantages and challenges of this class of smart polymers focusing our attention on their current technological applications in medical, electronic, food packaging and environmental remediation fields. Furthermore, we deal with the main issue of their recyclability, considering that the current commercial bioplastics are not yet able to meet the global needs as much as to totally replace fossil-fuel-based products. Finally, the most accredited strategies to reach recyclable composites based on acrylic polymers are described.

Lacerda T. Monomers and Macromolecular Materials from Renewable Resources: State of the Art and Perspectives

A progressively increasing concern about the environmental impacts of the whole polymer industry has boosted the design of less aggressive technologies that allow for the maximum use of carbon atoms, and reduced dependence on the fossil platform. Progresses related to the former approach are mostly based on the concept of the circular economy, which aims at a thorough use of raw materials, from production to disposal. The latter, however, has been considered a priority nowadays, as short-term biological processes can efficiently provide a myriad of chemicals for the polymer industry. Polymers from renewable resources are widely established in research and technology facilities from all over the world, and a broader consolidation of such materials is expected in a near future. Herein, an up-to-date overview of the most recent and relevant contributions dedicated to the production of monomers and polymers from biomass is presented. We provide some basic issues related to the preparation of polymers from renewable resources to discuss ongoing strategies that can be used to achieve original polymers and systems thereof.

Fluorescence-encoded poly(methyl metharcylate) nanoparticles for a lateral flow assay detecting IgM autoantibodies in rheumatoid arthritis

Rheumatoid arthritis (RA) belongs to the most often occurring autoimmune diseases in the world. For serological diagnosis, IgM auto-antibodies directed against the Fc portion of IgG referred to as rheumatoid factor are used as biomarkers. The autoantibody detection is usually done by ELISA. Such assays are reliable but are not suitable for point-of-care testing in contrast to lateral flow assays. Here, we report the development of a lateral flow assay based on carboxylated fluorescence-encoded poly(methyl methacrylate) nanoparticles. Poly(methyl methacrylate) is a non-toxic plastic with an excellent biocompatibility and high optical transparency which promises especially high sensitive fluorescence detection thereby leading to very sensitive assays. We could detect a positive signal in samples with a nephelometric reading down to 0.4 U/mL. By analyzing 30 sera of patients with a RA diagnosis and 34 sera of healthy test subjects we could confirm positive ELISA results in 72% of all cases and negative ELISA results in 97% of all cases.

The impact of differential lignin S/G ratios on mutagenicity and chicken embryonic toxicity

Lignin and lignin-based materials have received considerable attention in various fields due to their promise as sustainable feedstocks. Guaiacol (G) and syringol (S) are two primary monolignols that occur in different ratios for different plant species. As methoxyphenols, G and S have been targeted as atmospheric pollutants and their acute toxicity examined. However, there is a rare understanding of the toxicological properties on other endpoints and mixture effects of these monolignols. To fill this knowledge gap, our study investigated the impact of different S/G ratios (0.5, 1, and 2) and three lignin depolymerization samples from poplar, pine, and miscanthus species on mutagenicity and developmental toxicity. A multitiered method consisted of in silico simulation, in vitro Ames test, and in vivo chicken embryonic assay was employed. In the Ames test, syringol showed a sign of mutagenicity, whereas guaiacol did not, which agreed with the T.E.S.T. simulation. For three S and G mixture and lignin monomers, mutagenic activity was related to the proportion of syringol. In addition, both S and G showed developmental toxicity in the chicken embryonic assay and T.E.S.T. simulation, and guaiacol had a severe effect on lipid peroxidation. A similar trend and comparable developmental toxicity levels were detected for S and G mixtures and the three lignin depolymerized monomers. This study provides data and insights on the differential toxicity of varying S/G ratios for some important building blocks for bio-based materials.

Effect of Substituents in Mussel-inspired Surface Primers on their Oxidation and Priming Efficiency

Marine mussels contain an abundant catechol moiety, 3,4-dihydroxyphenylalanine (DOPA), in their interfacial foot proteins. DOPA contributes to both surface adhesion and bridging between the surface and overhead proteins (surface priming) by taking advantage of the unique redox properties of catechol. Inspired by the mussel surface priming mechanism, herein we synthesized a series of DOPA-mimetic analogs - a bifunctional group molecule, consisting of a catechol group and an acrylic group at the opposite ends. The surface primers with differently substituted (-COOH, -CH3 ) alkyl chains in the middle spacer were synthesized. Time-dependent oxidation and redox potentials of the surface primers were studied in an oxidizing environment to gain a better understanding of the mussel's redox chemistry. The thickness and degree of priming of the surface primers on silicon-based substrates were analyzed by ellipsometry and UV/Vis absorption spectroscopy. The post-reactivity of the acrylic groups of the primed layer was first visualized through a reaction with an acrylic group-reactive dye.

Synthesis of Lignin-Based MMA-co-BA Hybrid Resins from Cornstalk Residue via RAFT Miniemulsion Polymerization and Their Characteristics

The conversion of cornstalk lignin derived from the co-product of bio-refinery into value-added products such as polymeric material has remarkable environmental and economic potential. A novel bio-based methyl methacrylate copolymerized with butyl acrylate (MMA-co-BA) hybrid resin in our research was prepared by the reversible addition-fragmentation chain transfer method using lignin-graft-polyacrylamide (lignin-g-PAM) as a bio-derived macromolecular chain transfer agent. The molecular architecture of lignin-g-PAM and the lignin-based MMA-co-BA hybrid resin was elucidated using 1H nuclear magnetic resonance and attenuated total reflectance-Fourier transform infrared. The thermal behavior and mechanical performance of the resultant lignin-based MMA-co-BA hybrid resins were also investigated through thermogravimetric analysis, differential scanning calorimetry, and a stress-strain test, respectively. The lignin-based acrylate resins system exhibited structure-related thermal and mechanical properties. Compared with pure MMA-co-BA resin, the incorporation of lignin into various lignin-based MMA-co-BA graft copolymers resulted in an improved tensile strength and a higher Young's modulus. This research could provide not only a new avenue to utilize waste biomass for high-value applications, but also a reference for designing new materials for coatings or adhesives.

Facile access to functional polyacrylates with dual stimuli response and tunable surface hydrophobicity

Well-defined functional polyacrylates with dual stimuli response and tunable surface hydrophobicity were synthesized via the recyclable Ni–Co alloy catalyzed reversible deactivation radical polymerization technique at ambient temperature.