Study of Zinc Diffusion Based on S, N-Codoped Honeycomb Carbon Cathodes for High-Performance Zinc-Ion Capacitors

Capacitors with zinc ions, with excellent stabilities, low cost, and high energy density, are expected to be promising energy storage devices. However, the development of zinc-ion capacitors is quietly restricted by low specific capacity and cycling stability. Herein, to overcome these limitations, honeycomb-structured S, N-codoped carbon (SNPC) is constructed by one-pot calcination of waste corn bracts and thiourea. The honeycomb structure of SNPC is demonstrated to provide abundant active sites that can enhance the extron/ion transport, conductivity for high power export, and ion adsorption capacity in energy storage applications, leading to a higher electrochemical performance achieved. The electrolytes of zinc salt have also been studied. It reveals that the SNPC electrode presents the best electrochemical performance in a 2 M ZnSO4 and 0.5 M ZnCl2 electrolyte mixture because in the electrolyte mixture, Cl- can replace the existing bound water in the solvation structure to form an anion-type water-free solvation structure ZnCl42-. The SNPC-800 electrode with a highly improved surface area (∼909.0 m2 g-1) is proved to be more suitable as the electrode than other materials. Aqueous zinc-ion capacitors (ZICs) have been assembled by the honeycomb-structured SNPC-800 as the cathode, which can achieve a relatively wide working voltage range of 0.1-1.8 V. The SNPC-800 ZICs exhibit a superior specific capacity of 179.1 mA h g-1 at 0.1 A g-1. The energy density of SNPC-800 ZICs reaches an impressive value of 89.6 Wh kg-1 at 53.8 W kg-1, and it sustains 28.3 Wh kg-1 at 1997.6 W kg-1. In addition, there is 99.8% capacity retention in the SNPC-800 ZICs over 5000 cycles. The absorption energy in SPNC is much higher than that in undoped CPC, as confirmed by density functional theory, which reveals that introducing of heteroatoms (S, N) has a comparatively active advantage at increasing the Zn-ion storage capacity. This work proposes a practical strategy for the effective recycling of waste biomass materials into honeycomb carbon electrode materials. Moreover, the honeycomb carbon-based ZICs with excellent electrochemical performance and long-term cycling stability possess great potential to be a superior cathode in practical applications.

Capillary Evaporation on High-Dense Conductive Ramie Carbon for Assisting Highly Volumetric-Performance Supercapacitors

Conductive biomass carbon possesses unique properties of excellent conductivity and outstanding thermal stability, which can be widely used as conductive additive. However, building the high-dense conductive biomass carbon with highly graphitized microcrystals at a lower carbonization temperature is still a major challenge because of structural disorder and low crystallinity of source material. Herein, a simple capillary evaporation method to efficiently build the high-dense conductive ramie carbon (hd-CRC) with the higher tap density of 0.47 cm3 g-1 than commercialized Super-C45 (0.16 cm3 g-1 ) is reported. Such highly graphitized microcrystals of hd-CRC can achieve the high electrical conductivity of 94.55 S cm-1 at the yield strength of 92.04 MPa , which is higher than commercialized Super-C45 (83.92 S cm-1 at 92.04 MPa). As a demonstration, hd-CRC based symmetrical supercapacitors possess a highly volumetric energy density of 9.01 Wh L-1 at 25.87 kW L-1 , much more than those of commercialized Super-C45 (5.06 Wh L-1 and 19.30 kW L-1 ). Remarkably, the flexible package supercapacitor remarkably presents a low leakage current of 10.27 mA and low equivalent series resistance of 3.93 mΩ. Evidently, this work is a meaningful step toward high-dense conductive biomass carbon from traditional biomass graphite carbon, greatly promoting the highly-volumetric-performance supercapacitors.

Synthesis of Fe3O4@SiO2@Pr-NH2@DAP as a magnetic recyclable nano-catalyst for efficient synthesis of pyranothiazolopyrimidines and 4H-pyrans under solvent-free condition

In this research, we describe the synthesis of silica-coated nano-Fe3O4 particles, which were successfully modified by diaminopyrimidine, and their physicochemical properties were characterized using FT-IR, XRD, TEM, FE-SEM, EDX, EDX-mapping, and TGA. The catalytic activity of this novel nano-catalyst was evaluated by three-component reactions for the preparation of pyranothiazolopyrimidines and 4H-pyrans under solvent-free conditions. Recyclability of the catalyst up to six consecutive rounds, atom economy, high yield and purity of desired products, and easy work-up method are some of the exciting features of this system that make it more favorable from a green chemistry point of view.

Synthesis and characterization of nanocatalyst Cu2+/mesoporous carbon for amidation reactions of alcohols

In this research, mesoporous carbon (MC) with high efficiency (0.65 g yield from 1.0 g MCM-41 and 1.25 g sucrose) was successfully prepared by adding carbon precursor (sucrose) in a single step with ultrasonic waves, which reduces time and energy cost. Then, the Cu²⁺/Mesoporous carbon nanocatalyst (Cu²⁺/MC) was synthesized by adding Cu(NO₃)₂ in a single step and applied as a catalyst in amidation reactions of alcohols. Also, Cu²⁺/MC was characterized using different spectroscopic methods and techniques, including Fourier transform infrared spectroscopy (FT-IR), Field Emission Scanning Electron Microscopy (FE-SEM), N₂ adsorption analysis (BET), X-ray diffraction analysis (XRD), Energy Dispersive X-ray (EDX), and Thermogravimetric Analysis (TGA). Moreover, to show the catalytic merits of Cu²⁺/MC, various primary and secondary amines and ammonium salts were applied in the amidation of alcohols. Easy synthesis method, recyclability, excellent yields (80-93%), and simple work-up are some noticeable strengths of using Cu²⁺/MC as a catalyst in this reaction.

Supercapacitive performance of C-axis preferentially oriented TiO2 nanotube arrays decorated with MoO3 nanoparticles

The highest specific capacitance of the MoO3-p-CTNTA electrode achieved is 194 F g−1 at a current density of f 1 A g−1.

Hierarchical porous carbon foam electrodes fabricated from waste polyurethane elastomer template for electric double-layer capacitors

Plastic waste has become a major global environmental concern. The utilization of solid waste-derived porous carbon for energy storage has received widespread attention in recent times. Herein, we report the comparison of electrochemical performance of porous carbon foams (CFs) produced from waste polyurethane (PU) elastomer templates via two different activation pathways. Electric double-layer capacitors (EDLCs) fabricated from the carbon foam exhibited a gravimetric capacitance of 74.4 F/g at 0.1 A/g. High packing density due to the presence of carbon spheres in the hierarchical structure offered excellent volumetric capacitance of 134.7 F/cm³ at 0.1 A/g. Besides, the CF-based EDLCs exhibited Coulombic efficiency close to 100% and showed stable cyclic performance for 5000 charge-discharge cycles with good capacitance retention of 97.7% at 3 A/g. Low equivalent series resistance (1.05 Ω) and charge transfer resistance (0.23 Ω) due to the extensive presence of hydroxyl functional groups contributed to attaining high power (48.89 kW/kg). Based on the preferred properties such as high specific surface area, hierarchical pore structure, surface functionalities, low metallic impurities, high conductivity and desirable capacitive behaviour, the CF prepared from waste PU elastomers have shown potential to be adopted as electrodes in EDLCs.

Fabrication and characterization of a TiBs@MCN cable-like photocatalyst with high photocatalytic performance under visible light irradiation

A cable-like photocatalyst, TiBs@MCN, with a larger specific surface area and higher visible-light photocatalytic activity, is successfully fabricated by an in situ hydrothermal self-assembly approach.

Fabrication of Fe3O4-incorporated MnO2 nanoflowers as electrodes for enhanced asymmetric supercapacitor performance

Manganese dioxide (MnO2) is considered a promising aspirant for energy storage materials on account of its higher theoretical capacitance along with low capital cost.

Tailoring the capacitive performance of ZnCo2O4 by doping of Ni2+ and fabrication of asymmetric supercapacitor

The specific capacity of ZnCo2O4 tailored effectively by doping with Ni2+