Full-color WGM lasing in nested microcavities

Device parameter to evaluate exciton energy transfer in organic whispering-gallery-mode microresonators and its dependence on the amplified spontaneous emission threshold

Exciton energy transfer in organic whispering-gallery-mode (WGM) resonators and its effect on the amplified spontaneous emission (ASE) threshold have been investigated using the stilbene-based energy donor 4,4'-bis[(N-carbazole)styryl]biphenyl (BSB-Cz) and the coumarin-based energy acceptor 2,3,6,7-tetrahydro-1,1,7,7,-tetramethyl-1H,5H,11H-10-(2-benzothiazolyl)quinolizino[9,9a,1gh]coumarin (C545T). Using the stacked-layer structure of BSB-Cz/C545T/BSB-Cz, we fabricated bowl-shaped microresonators on silica microspheres with a total thickness of 250 nm fixing the thickness of the C545T layer to 1 nm. The ASE threshold depended on the thicknesses of the top and bottom BSB-Cz layers, which affect the magnitude of the energy transfer. To assess the relationship between the ASE threshold and energy transfer, we developed a device parameter to evaluate the magnitude of the energy transfer by formulating the rate equations. We found that ASE easily occurs under the condition that the C545T molecules become unable to accept energy from the BSB-Cz excitons owing to the high exciton density of C545T, and that the ASE threshold decreases with decreasing device parameter. The device parameter is useful for optimizing microresonator structures in multi-component organic WGM resonators that utilize energy transfer.

Transferable microfiber laser arrays for high-sensitivity thermal sensing

Functional microfibers have attracted extensive attention due to their potential in health monitoring, radiation cooling, power management and luminescence. Among these, polymer fiber-based microlasers have plentiful applications due to their merits of full color, high quality factor and simple fabrication. However, developing a facile approach to fabricate stable microfiber lasing devices for high-sensitivity thermal sensing is still challenging. In this research, we propose a design of a stable and transferable membrane inlaid with whispering-gallery-mode plasmon hybrid microlaser arrays for thermal sensing. By integrating plasmonic gold nanorods with polymer lasing microfiber arrays that are embedded in the polydimethylsiloxane matrix, whispering-gallery-mode lasing arrays with high quality are achieved. Based on the thermo-optical effect of the membrane, a tuning range of 1.462 nm for the lasing peak shift under temperature variation from 30.6 °C to 38.7 °C is obtained. The ultimate thermal sensing sensitivity can reach up to 0.181 nm °C-1 and the limit of detection is 0.131 °C, with a high figure of merit of 2.961 °C-1. Moreover, a stable laser linewidth can be maintained within the tuning range due to plasmon-improved photon confinement and PDMS-reduced scattering loss. This work is expected to provide a facile approach for the fabrication of high-sensitivity on-chip thermometry devices.

An all-optical tunable polymer WGM laser pumped by a laser diode

An all-optical tunable whispering gallery mode (WGM) laser pumped by a laser diode is proposed. The laser is fabricated by filling a silica capillary with a light-emitting conjugated polymer solution. Based on the thermo-optic effect of the hydroxyl groups in the polymer and capillary, the effective refractive index of the WGM cavity changes by the auxiliary irradiation of the laser, and the wavelength of the WGM mode shifts correspondingly. The emission wavelength was continuously tuned over 13 nm with the irradiation power intensity changing from 0 to 22.41 W cm-2, showing a corresponding tuning rate of 0.58 nm W-1 cm-2. The wavelength tuning process has a fast response time that is within 2.8 s. It shows strong stability, with the output intensity showing no obvious attenuation after 100 minutes of operation. The proposed laser exhibits good repeatability, stability and high tuning efficiency, and could be applied as a light source for on-chip devices.