Highly efficient sorption of molybdenum from tungstate solution with modified D301 resin

Adsorption behavior of Mo(VI) from aqueous solutions using tungstate-modified magnetic nanoparticle

A new magnetic nanoparticle modified with sodium tungstate (Mnp-Si-W) was synthesized and employed for the sorption of molybdenum from aqueous solutions. The prepared nanoparticles (Mnp-Si-W) were characterized by different advanced techniques. Different parameters that influenced the adsorption percent of Mo(VI) were investigated using a batch process. Based on a systematic investigation of the adsorption isotherms and kinetics models, Mo(VI) adsorption follows the Langmuir model and pseudo-second-order kinetics. According to the Langmuir isotherm model, the Mnp-Si-W nanoparticles exhibited a maximum adsorption capacity of 182.03 mg g-1 for Mo(VI) at pH 2.0. The effect of competing ions showed that the prepared nanoparticles have a high selectivity for the sorption of molybdenum. Moreover, the effect of some interfering anions on Mo(VI) ion sorption is found in the following order: phosphate < sulfate < chromate. Finally, the nanoparticle (Mnp-Si-W) can be successfully reused five times.

Modification of ultrasound-pretreated montmorillonite using poly(diallyldimethylammonium chloride) for W and Mo separation and the sequential application in removal of heavy metals

The use of a resin to selectively separate thiomolybdate from a tungsten (W) feed solution is a well-known protocol for achieve high-purity W products; however, the regeneration of saturated resin is laborious. In this study, poly(diallyl dimethyl ammonium chloride) (PDADMA) was used to modify ultrasound-pretreated montmorillonite (Mt) for W and molybdenum (Mo) separation for the first time, and the resultant tetrathiomolybdate (MoS42-)-loaded composite was further tested to remove heavy metals instead of regeneration. Among the three variables of ultrasound pretreatment, that is, Mt concentration, ultrasound power, and treatment time, the Mt concentration exhibited the most significant influence followed by ultrasound power on the separation performance of W and Mo. Compared to the distance of the interlayer space and the surface charge of the modified Mt, the PDADMA content showed a closer correlation with the W/Mo separation coefficient. Assisted by Box-Behnken design, with Mt concentration of 6.9 g/L, ultrasound power of 593.8 W, and treatment time of 13.8 min, the composite with the greatest separation coefficient was obtained. The adsorption of Cu(II) on the optimal W/Mo separation-derived composite was ascribed to the formation of Cu-S complexes, while that of Pb(II) was attributed to complexation and surface precipitation. In contrast, ion exchange with the initially loaded anions, reduction by sulfide to Cr(III), and formation of Cr(III)-S complexes accounted for Cr(VI) removal. The adsorption of Cu(II) and Pb(II) equilibrated faster and showed higher acid-resistance than that of Cr(VI). The adsorption capacities for Cu(II), Pb(II), and Cr(VI) were 0.535, 1.398, and 0.882 mmol/g, respectively. Applying PDADMA to modify Mt as a reagent for W/Mo separation was feasible, and the derived composite was capable of removing cationic and anionic heavy metals.