Nonsurgical rapid maxillary expansion effects on craniofacial structures in young adult females. A bone scintigraphy study

Comparison of dentoskeletal and soft tissue changes between tooth-borne and tooth-bone-borne hybrid nonsurgical rapid maxillary expansions in adults: a retrospective observational study

BACKGROUND

Despite the gradual increase in the use of rapid maxillary expansion (RME), specifically RME with the aid of skeletal anchorage in adults, there have been no reports comparing dentoskeletal and soft tissue changes between nonsurgical tooth-borne and tooth-bone-borne RMEs in adults. This study aimed to analyse differences in dentoskeletal and soft tissue changes between tooth-borne and tooth-bone-borne RMEs using a similar appliance design and the same expansion protocol in adult patients.

METHODS

Twenty-one patients with tooth-borne expansion (a conventional expansion screw with two premolars and two molar bands for dental anchorage [T-RME]) and the same number of patients with tooth-bone-borne hybrid expansion (a conventional expansion screw with two premolar and two molar bands for dental anchorage and four mini-implants in the palate for skeletal anchorage [H-RME]) were included. Dentoskeletal and soft tissue variables at pretreatment (T1) and after expansion (T2) were measured using posteroanterior and lateral cephalograms and frontal photographs. The sex distribution of the two groups was analysed using the chi-square test, and the change after RME in each group was evaluated using the Wilcoxon signed-rank test. Differences in pretreatment age, expansion duration, post-expansion duration, and dentoskeletal and soft tissue changes after RME between the two groups were determined using the Mann-Whitney U test.

RESULTS

There were no significant differences in the expansion protocol, pretreatment conditions, and sex distribution between the two groups. Despite similar degrees of dental expansion at the crown level between the two groups, H-RME induced increased skeletal and parallel expansion of the maxilla compared to T-RME. After expansion, H-RME demonstrated increased forward displacement of the maxilla without significant changes in the vertical dimension, while T-RME exhibited increased backward displacement of the mandible, increased vertical dimension, and decreased overbite. Both groups showed significant retroclination and extrusion of the maxillary incisors without significant intergroup differences. There were no significant soft tissue changes between the two groups.

CONCLUSION

This study suggests that using skeletal anchorage in RME may induce increased skeletal and parallel expansion of the maxilla without significant effects on the vertical dimension.

Three-dimensional assessment of the spheno-occipital synchondrosis and clivus after tooth-borne and bone-borne rapid maxillary expansion

OBJECTIVES

To assess changes in spheno-occipital synchondrosis after rapid maxillary expansion (RME) performed with conventional tooth-borne (TB) and bone-borne (BB) appliances.

MATERIALS AND METHODS

This study included 40 subjects with transverse maxillary deficiency who received TB RME or BB RME. Cone-beam computed tomography images (CBCT) were taken before treatment (T0), and after a 6-month retention period (T1). Three-dimensional surface models of the spheno-occipital synchondrosis and basilar part of the occipital bone were generated. The CBCTs taken at T0 and T1 were registered at the anterior cranial fossa via voxel-based superimposition. Quantitative evaluation of Basion displacement was performed with linear measurements and Euclidean distances. The volume of the synchndrosis was also calculated for each time point as well as the Nasion-Sella-Basion angle (N-S-Ba°). All data were statistically analyzed to perform inter-timing and intergroup comparisons.

RESULTS

In both groups, there was a small increment of the volume of the synchondrosis and of N-S-Ba° (P < .05). Basion showed a posterosuperior pattern of displacement. However, no significant differences (P > .05) were found between the two groups.

CONCLUSIONS

Although TB and BB RME seemed to have some effects on the spheno-occipital synchondrosis, differences were very small and clinically negligible.

Three-dimensional zygomatic changes after rapid maxillary expansion in growing patients

PURPOSE

To assess the effects of rapid maxillary expansion (RME) treatment on the zygomatic bone complex (ZBC).

METHODS

In this single-center retrospective study, pre- and posttreatment cone-beam computed tomography (CBCT) images of 38 patients treated with RME were analyzed to investigate changes in the coordinates of the ZBC landmarks. At the start of treatment (T0), the patients' mean age was 11.1 ± 3.8 years (range 8.3-14.9 years). Cohen's d test was used to evaluate statistical differences.

RESULTS

There were statistically significant differences between T0 and T1 (P < 0.01) in the measurement values for the maxillary transverse width (ΔT: 3.18 ± 2.58, d: 1.23), frontozygomatic sutures (ΔT: 1.09 ± 0.56, d: 0.43), lowest point of the zygomaticomaxillary sutures (ΔT: 3.16 ± 1.78, d: 0.78), frontomaxillary angular parameter (right side ΔT: 2.81 ± 1.63, d: 1.73; left side ΔT: 2.52 ± 1.20, d: 2.10), frontozygomatic angular parameter (right side ΔT: 2.81 ± 1.63 d: 1.07; left side ΔT: 2.21 ± 2.79, d: 0.61), anterior intermaxillary distance (ΔT: 2.11 ± 1.42, d: 0.99), interzygomaticotemporal distance (ΔT: 2.00 ± 2.42, d: 0.99), and zygomatic angular parameter (right side ΔT: 2.06 ± 1.29, d: 1.6; left side ΔT: 2.02 ± 1.86, d: 1.09).

CONCLUSIONS

After RME in growing patients, the zygomatic bone showed pyramidal expansion in the coronal plane and parallel palatal expansion in the axial plane. In addition, significant lateral relocation of the zygomatic bone occurred. The zygomatic bone tended to rotate outward in conjunction with the maxilla, with a typical center of rotation close to the superior side of the frontozygomatic suture. These results shed light on the patterns of skeletal expansion in the zygomatic bone associated with RME in growing patients.

Tomographic analysis of midpalatal suture prior to rapid maxillary expansion

INTRODUCTION

In Orthodontics and Facial Orthopedics, the timing of treatment onset may be critical and individual analysis should be applied to promote a favorable treatment planning. In this study, individual analysis of midpalatal suture (MS) and palatal measurements were performed in teenagers and young adult patients treated with rapid maxillary expansion (RME).

DESCRIPTION

Twenty-six patients submitted to RME with a tooth-supported appliance (Hyrax) were evaluated. The inclusion criteria were: minimum age of 14 years, presenting all posterior teeth, diagnosed with transverse maxillary discrepancy, and with a clinical indication for maxillary expansion. The pretreatment CBCT scans of these patients were assessed to obtain the stages of MS maturation (MSM); density ratio (MSD); and palatal length, thickness (anterior, intermediate and posterior) and sagittal area.

RESULTS

The maturation stages present were C, D or E; the density ranged from 0.6 to 1, and lower density (MSD < 0.75) and higher density (MSD ≥ 0.75) groups were determined. Individuals with higher MSD presented smaller sagittal area, compared to the lower density group. Individuals in D and E MSM stages presented smaller sagittal area and intermediate thickness, compared to stage C.

CONCLUSIONS

Smaller palatal sagittal area was observed in the high MSD groups and in the stages D and E of MSM.

Comparison of Tooth- and Bone-Borne Appliances on the Stress Distributions and Displacement Patterns in the Facial Skeleton in Surgically Assisted Rapid Maxillary Expansion-A Finite Element Analysis (FEA) Study

The aim of this study was to compare the reduced stresses according to Huber’s hypothesis and the displacement pattern in the region of the facial skeleton using a tooth- or bone-borne appliance in surgically assisted rapid maxillary expansion (SARME). In the current literature, the lack of updated reports about biomechanical effects in bone-borne appliances used in SARME is noticeable. Finite element analysis (FEA) was used for this study. Six facial skeleton models were created, five with various variants of osteotomy and one without osteotomy. Two different appliances for maxillary expansion were used for each model. The three-dimensional (3D) model of the facial skeleton was created on the basis of spiral computed tomography (CT) scans of a 32-year-old patient with maxillary constriction. The finite element model was built using ANSYS 15.0 software, in which the computations were carried out. Stress distributions and displacement values along the 3D axes were found for each osteotomy variant with the expansion of the tooth- and the bone-borne devices at a level of 0.5 mm. The investigation showed that in the case of a full osteotomy of the maxilla, as described by Bell and Epker in 1976, the method of fixing the appliance for maxillary expansion had no impact on the distribution of the reduced stresses according to Huber’s hypothesis in the facial skeleton. In the case of the bone-borne appliance, the load on the teeth, which may lead to periodontal and orthodontic complications, was eliminated. In the case of a full osteotomy of the maxilla, displacements in the buccolingual direction for all the variables of the bone-borne appliance were slightly bigger than for the tooth-borne appliance.

Dental and Skeletal Changes after Transpalatal Distraction

Maxillary constriction is a common skeletal craniofacial abnormality, and transverse maxillary deficiency affects 30% of patients receiving orthodontic and surgical treatment. The aim of the study was to analyse craniofacial skeletal changes in adults with maxillary constriction after transpalatal distraction. The study group consisted of 36 patients (16 women) aged 17 to 42 years (M = 27.1; SD = 7.8) with a known complete skeletal crossbite and who underwent transpalatal distraction procedure. The measurements were obtained on diagnostic models, and cephalometric PA radiograms were obtained at time points, i.e., before treatment (T1) and after the completion of active distraction (T2). The analysis of diagnostic models involving the arch width measurement at different levels demonstrated a significant increase in L1, L2, L3, L4, L5, and L6 dimensions after transpalatal distraction. The largest width increase (9.5 mm) was observed for the L3 dimension (the intercanine distance). The analysis of frontal cephalograms displayed a significant increase in W1, W2, and W3 dimensions after transpalatal distraction. The largest width increase (4.9 mm) was observed for the W1 dimension at the level of the alveolar process of the maxilla. Transpalatal distraction is an effective treatment for transverse maxillary deficiency after the end of bone growth. The expansion observed on diagnostic models is close to a parallel segment shift mechanism, with a mild tendency towards a larger opening anteriorly. The maxillary segment rotation pattern analysed based on the frontal cephalograms is close to a hand fan unfolding with the rotation point at the frontonasal suture.

Effect of rapid maxillary expansion on the morphology of spheno-occipital synchondrosis in rats : A micro-CT study

PURPOSE

Spheno-occipital synchondrosis (SOS) plays a significant role in the anterior growth of the midface. Orthopaedic forces acting during rapid maxillary expansion (RME) are transferred to the skull base and thus could alter the morphology of SOS. The aim of this study was to assess the influence of experimental RME on the rats' SOS by means of micro-computed tomography (micro-CT).

METHODS

In all, 40 male 8‑week-old Wistar rats were enrolled into the study, among which 30 underwent experimental RME for 7, 14 and 21 days by means of custom designed spring-coil expander. Specimens were scanned by micro-CT and median palatal suture area, maxillary skeletal base and SOS width were analysed.

RESULTS

Experimental RME resulted in a significant increase of the median palatal suture space and maxillary skeletal base which was particularly pronounced between day 14 and 21 of expansion. SOS width increased significantly during the first 7 days at the lowest point of the synchondrosis. However, the SOS width assessed at its highest point was temporarily even decreased between days 8 and 14 of therapy.

CONCLUSIONS

Early SOS widening could be identified in the lowest part before median palatal suture opening. Similarly, narrowing of the SOS at its top was observed before the most significant median palatal suture expansion. Thus it can be hypothesized that changes within the SOS complex result from the transmission of the orthopaedic forces rather than from a displacement of the maxillary halves.

Three dimensional evaluation of alveolar bone changes in response to different rapid palatal expansion activation rates

INTRODUCTION

The aim of this multi-center retrospective study was to quantify the changes in alveolar bone height and thickness after using two different rapid palatal expansion (RPE) activation protocols, and to determine whether a more rapid rate of expansion is likely to cause more adverse effects, such as alveolar tipping, dental tipping, fenestration and dehiscence of anchorage teeth.

METHODS

The sample consisted of pre- and post-expansion records from 40 subjects (age 8-15 years) who underwent RPE using a 4-banded Hyrax appliance as part of their orthodontic treatment to correct posterior buccal crossbites. Subjects were divided into two groups according to their RPE activation rates (0.5 mm/day and 0.8 mm/day; n = 20 each group). Three-dimensional images for all included subjects were evaluated using Dolphin Imaging Software 11.7 Premium. Maxillary base width, buccal and palatal cortical bone thickness, alveolar bone height, and root angulation and length were measured. Significance of the changes in the measurements was evaluated using Wilcoxon signed-rank test and comparisons between groups were done using ANOVA. Significance was defined at p ≤ 0.05.

RESULTS

RPE activation rates of 0.5 mm per day (Group 1) and 0.8 mm per day (Group 2) caused significant increase in arch width following treatment; however, Group 2 showed greater increases compared to Group 1 (p < 0.01). Buccal alveolar height and width decreased significantly in both groups. Both treatment protocols resulted in significant increases in buccal-lingual angulation of teeth; however, Group 2 showed greater increases compared to Group 1 (p < 0.01).

CONCLUSION

Both activation rates are associated with significant increase in intra-arch widths. However, 0.8 mm/day resulted in greater increases. The 0.8 mm/day activation rate also resulted in more increased dental tipping and decreased buccal alveolar bone thickness over 0.5 mm/day.

Effect of non-surgical maxillary expansion on the nasal septum deviation: a systematic review

Nasal breathing is a requirement for proper growth and development of the craniofacial complex. Inadequacy of the nasal airway from obstruction such as from nasal septal deviation (NSD) can affect craniofacial development. Further investigation of the possibility of rapid maxillary expansion (RME) correcting NSD would be valuable, considering the undesirable sequelae of NSD on nasal breathing, which can consequently affect craniofacial development. A systematic review of the effect of RME treatment on NSD was conducted. Electronic database searches were conducted until April 2015 using MEDLINE, EMBASE, Web of Science, Cochrane Database of Systematic Reviews (CDSR), Cochrane Central Register of Controlled Trials (CCTR), Cochrane Methodology Register (CMR), Database of Abstracts of Reviews of Effects (DARE), American College of Physicians Journal Club (ACP Journal Club), Health Technology Assessments (HTA), and NHS Economic Evaluation Database (NHSEED). MeSH terms used in database searches were ‘nasal septum,’ ‘palatal expansion,’ and ‘maxillary expansion,’ ‘orthodontic device,’ and ‘palatal expansion technique.’ The methodological quality of studies was reviewed using methodological index for non-randomized studies (MINORS). Only two studies were finally selected and reviewed. Both studies had significant methodological limitations. One study reported a significant straightening of the nasal septum in the middle and the inferior third of nasal cavity from RME in children aged 5 to 9 years. The other study reported no positional change in the nasal septum from RME in adolescent orthodontic patients. Thus far, the limited available (moderate risk of bias) evidence suggests a potentially positive effect on the nasal septum asymmetry during childhood, but no significant change in adolescence from RME in patients with NSD. The clinical significance of reported changes could be considered questionable.

Comparative characterization of maxillary expansion and alternate maxillary expansions and constrictions in rats

The purpose of this study was to evaluate whether the cranial and circumaxillary sutures react differently to maxillary expansion (ME) and alternate maxillary expansions and constrictions (Alt-MEC) in a rat model. Twenty-two male Sprague-Dawley rats (6 weeks old) were used and divided into three groups. In ME group (n=9), an expander was activated for 5 days. In Alt-MEC group (9 animals), an alternate expansion and constriction protocol (5-day expansion and 5-day constriction for one cycle) was conducted for 2.5 cycles (25 days total). The control group comprised 4 animals with no appliances used, each of two sacrificed on day 5 and day 25 respectively. Midpalatal suture expansion or constriction levels were assessed qualitatively and quantitatively by bite-wing X-rays and cast models. Distances between two central incisors and two maxillary first molars were measured on cast models after each activation. Circumaxillary sutures (midpalatal, maxillopalatine, premaxillary, zygomaticotemporal and frontonasal suture) in each group were characterized histologically. Results showed that midpalatal suture was widened and restored after each expansion and constriction. At the end of activation, the widths between both central incisors and first molars in Alt-MEC group were significantly larger than those in ME group (P<0.05). Histologically, all five circumaxillary sutures studied were widened in multiple zones in Alt-MEC group. However, only midpalatal suture was expanded with cellular fibrous tissue filling in ME group. Significant osteoclast hyperplasia was observed in all circumaxillary sutures after alternate expansions and constrictions, but osteoclast count increase was only observed in midpalatal suture in ME group. These results suggested that cranial and circumaxillary sutures were actively reconstructed after Alt-MEC, while only midpalatal suture had active reaction after ME.

An assessment of the maxilla after rapid maxillary expansion using cone beam computed tomography in growing children

INTRODUCTION

With the advent of cone beam computed tomography (CBCT), it is now possible to quantitatively evaluate the effects of rapid maxillary expansion (RME) on the entire maxillary complex in growing patients.

OBJECTIVE

The purpose of this study is to use three-dimensional images to evaluate the displacement that occurs at the circummaxillary sutures (frontonasal, zygomaticomaxillary, intermaxillary, midpalatal, and transpalatal sutures) following rapid maxillary expansion in growing children.

METHODS

The CBCT scans of 25 consecutively treated RME patients (10 male, 15 female) with mean age of 12.3±2.6 years, were examined before expansion and immediately following the last activation of the expansion appliance.

RESULTS

Statistically significant (P<0.05) amounts of separation were found for the displacement of the bones of the frontonasal suture, the intermaxillary suture, the zygomaticomaxillary sutures, and the midpalatal suture. The change in angulation of the maxillary first molars due to RME was also statistically significant. There was no statistically significant displacement of the transpalatal suture.

CONCLUSIONS

Rapid maxillary expansion results in significant displacement of the bones of circummaxillary sutures in growing children.

Changes in CT cerebral blood flow and volume associated with rapid maxillary expansion in a rabbit model

OBJECTIVE

To evaluate hemodynamic changes of the brain under the high forces of a rapid maxillary expansion (RME) appliance in a rabbit model.

MATERIALS AND METHODS

Twenty-four male New Zealand white rabbits were selected (12 weeks old, mean weight 3.01 ± 0.22 kg). A modified acrylic resin bonded RME appliance was used for expansion. A series of perfusion computed tomography examinations was performed before expansion (T0), on the fifth day of expansion (T1), at the end of the expansion process (T2), and after 10 days of retention (T3). Cerebral blood flow, cerebral blood volume, and mean transit time maps were recorded and parametrics evaluated. Statistical analyses were performed with analysis of variance with post hoc tests.

RESULTS

Mean cerebral blood flow showed an increase from T0 to T2 and then a decrease from T2 to T3, but the change was not statistically significant. Mean cerebral blood volume and mean transit time increased significantly from T0 to T2, and all perfusion parameters increased from T0 to T3.

CONCLUSIONS

RME is a safe orthopedic method despite the high expansion force. Perfusion computed tomography is effective for evaluating the hemodynamic changes of the brain caused by some orthopedic therapies. The increase in both cerebral blood volume and cerebral blood flow may help to explain why RME could alleviate the symptoms of enuretic children.