Point and ring defects in nematics under capillary confinement

Geometry-structure models for liquid crystal interfaces, drops and membranes: wrinkling, shape selection and dissipative shape evolution

We review our recent contributions to anisotropic soft matter models for liquid crystal interfaces, drops and membranes, emphasizing validations with experimental and biological data, and with related theory and simulation literature. The presentation aims to illustrate and characterize the rich output and future opportunities of using a methodology based on the liquid crystal-membrane shape equation applied to static and dynamic pattern formation phenomena. The geometry of static and kinetic shapes is usually described with dimensional curvatures that co-mingle shape and curvedness. In this review, we systematically show how the application of a novel decoupled shape-curvedness framework to practical and ubiquitous soft matter phenomena, such as the shape of drops and tactoids and bending of evolving membranes, leads to deeper quantitative insights than when using traditional dimensional mean and Gaussian curvatures. The review focuses only on (1) statics of wrinkling and shape selection in liquid crystal interfaces and membranes; (2) kinetics and dissipative dynamics of shape evolution in membranes; and (3) computational methods for shape selection and shape evolution; due to various limitations other important topics are excluded. Finally, the outlook follows a similar structure. The main results include: (1) single and multiple wavelength corrugations in liquid crystal interfaces appear naturally in the presence of surface splay and bend orientation distortions with scaling laws governed by ratios of anchoring-to-isotropic tension energy; adding membrane elasticity to liquid crystal anchoring generates multiple scales wrinkling as in tulips; drops of liquid crystals encapsulates in membranes can adopt, according to the ratios of anchoring/tension/bending, families of shapes as multilobal, tactoidal, and serrated as observed in biological cells. (2) Mapping the liquid crystal director to a membrane unit normal. The dissipative shape evolution model with irreversible thermodynamics for flows dominated by bending rates, yields new insights. The model explains the kinetic stability of cylinders, while spheres and saddles are attractors. The model also adds to the evolving understanding of outer hair cells in the inner ear. (3) Computational soft matter geometry includes solving shape equations, trajectories on energy and orientation landscapes, and shape-curvedness evolutions on entropy production landscape with efficient numerical methods and adaptive approaches.

Emergence and stabilization of transient twisted defect structures in confined achiral liquid crystals at a phase transition

Spontaneous emergence of chirality is a pervasive theme in soft matter. We report a transient twist forming in achiral nematic liquid crystals confined to a capillary tube with square cross section. At the smectic-nematic phase transition, intertwined disclination line pairs are observed with both helical and kinked lozenge-like contours, configurations that we promote through capillary cross-section geometry and stabilize using fluorescent amphiphilic molecules. The observed texture is similar to that found in "exotic" materials such as chromonics, but it is here observed in common thermotropic nematics upon heating from the smectic into the nematic phase. Numerical modeling further reveals that the disclinations may possess winding characters that are intermediate between wedge and twist, and that vary along the defect contours. In our experiments, we utilize a phase transition to generate otherwise elusive defect structures in common liquid crystal materials.

Relaxation dynamics in bio-colloidal cholesteric liquid crystals confined to cylindrical geometry

Para-nematic phases, induced by unwinding chiral helices, spontaneously relax to a chiral ground state through phase ordering dynamics that are of great interest and crucial for applications such as stimuli-responsive and biomimetic engineering. In this work, we characterize the cholesteric phase relaxation behaviors of β-lactoglobulin amyloid fibrils and cellulose nanocrystals confined into cylindrical capillaries, uncovering two different equilibration pathways. The integration of experimental measurements and theoretical predictions reveals the starkly distinct underlying mechanism behind the relaxation dynamics of β-lactoglobulin amyloid fibrils, characterized by slow equilibration achieved through consecutive sigmoidal-like steps, and of cellulose nanocrystals, characterized by fast equilibration obtained through smooth relaxation dynamics. Particularly, the specific relaxation behaviors are shown to emerge from the order parameter of the unwound cholesteric medium, which depends on chirality and elasticity. The experimental findings are supported by direct numerical simulations, allowing to establish hard-to-measure viscoelastic properties without applying magnetic or electric fields.

Chiral nematic liquid crystals in torus-shaped and cylindrical cavities

We present a Monte Carlo simulation study of chiral nematic liquid crystals confined in torus-shaped and cylindrical cavities. For an achiral nematic with planar degenerate anchoring confined to a toroidal or cylindrical cavity, the ground state is defect free, with an untwisted director field. As chirality is introduced, the ground state remains defect free but the director field becomes twisted within the cavity. For homeotropic anchoring, the ground state for an achiral nematic within a toroidal cavity consists of two disclination rings, one large and one small, that follow the major circumference of the torus. As chirality is introduced and increased, this ground state becomes unstable with respect to twisted configurations. The closed nature of the toroidal cavity requires that only a half integer number of twists can be formed and this leads to the ground state being either a single disclination line that encircles the torus twice or a pair of intertwined disclination rings forming stable, knotted defect structures.

Electrically modulated capillary filling imbibition of nematic liquid crystals

The flow of nematic liquid crystals (NLCs) in the presence of an electric field is typically characterized by the variation in its rheological properties due to transition in its molecular arrangements. Here, we bring out a nontrivial interplay of a consequent alteration in the resistive viscous effects and driving electrocapillary interactions, toward maneuvering the capillary filling dynamics over miniaturized scales. Considering a dynamic interplay of the relevant bulk and interfacial forces acting in tandem, our results converge nicely to previously reported experimental data. Finally, we attempt a scaling analysis to bring forth further insight to the reported observations. Our analysis paves the way for the development of microfluidic strategies with previously unexplored paradigms of interaction between electrical and fluidic phenomenon, providing with an augmented controllability on capillary filling as compared to tthose reported to be achievable by the existing strategies. This, in turn, holds utilitarian scopes in improved designs of functional capillarities in electro-optical systems, electrorheological utilities, electrokinetic flow control, as well as in interfacing and imaging systems for biomedical microdevices.

Liquid crystals in micron-scale droplets, shells and fibers

The extraordinary responsiveness and large diversity of self-assembled structures of liquid crystals are well documented and they have been extensively used in devices like displays. For long, this application route strongly influenced academic research, which frequently focused on the performance of liquid crystals in display-like geometries, typically between flat, rigid substrates of glass or similar solids. Today a new trend is clearly visible, where liquid crystals confined within curved, often soft and flexible, interfaces are in focus. Innovation in microfluidic technology has opened for high-throughput production of liquid crystal droplets or shells with exquisite monodispersity, and modern characterization methods allow detailed analysis of complex director arrangements. The introduction of electrospinning in liquid crystal research has enabled encapsulation in optically transparent polymeric cylinders with very small radius, allowing studies of confinement effects that were not easily accessible before. It also opened the prospect of functionalizing textile fibers with liquid crystals in the core, triggering activities that target wearable devices with true textile form factor for seamless integration in clothing. Together, these developments have brought issues center stage that might previously have been considered esoteric, like the interaction of topological defects on spherical surfaces, saddle-splay curvature-induced spontaneous chiral symmetry breaking, or the non-trivial shape changes of curved liquid crystal elastomers with non-uniform director fields that undergo a phase transition to an isotropic state. The new research thrusts are motivated equally by the intriguing soft matter physics showcased by liquid crystals in these unconventional geometries, and by the many novel application opportunities that arise when we can reproducibly manufacture these systems on a commercial scale. This review attempts to summarize the current understanding of liquid crystals in spherical and cylindrical geometry, the state of the art of producing such samples, as well as the perspectives for innovative applications that have been put forward.

Disclination elastica model of loop collision and growth in confined nematic liquid crystals

Theory and modeling are used to characterize disclination loop-loop interactions in nematic liquid crystals under capillary confinement with strong homeotropic anchoring. This defect process arises when a mesogen in the isotropic phase is quenched into the stable nematic state. The texture evolution starts with +1/2 disclination loops that merge into a single loop through a process that involves collision, pinching and relaxation. The process is characterized with a combined Rouse-Frank model that incorporates the tension and bending elasticity of disclinations and the rotational viscosity of nematics. The Frank model of disclinations follows the Euler elastica model, whose non-periodic solution, known as Poleni's curve, is shown to locally describe the loop-loop collision and to shed light on why loop-loop merging results in a disclination intersection angle of approximately 60°. Additional Poleni invariants demonstrate how tension and bending pinch the two loops into a single +1/2 disclination ring. The Rouse model of disclination relaxation yields a Cahn-Hilliard equation whose time constant combines the confinement, tension/bending stiffness ratio and disclination diffusivity. Based on predictions made using this three stage process, a practical procedure is proposed to find viscoelastic parameters from defect geometry and defect dynamics. These findings contribute to the evolving understanding of textural transformations in nematic liquid crystals under confinement using the disclination elastica methodology.

Theoretical predictions of disclination loop growth for nematic liquid crystals under capillary confinement

The combination of low elasticity modulus, anisotropy, and responsiveness to external fields drives the rich variety of experimentally observed pattern formation in nematic liquid crystals under capillary confinement. External fields of interest in technology and fundamental physics are flow fields, electromagnetic fields, and surface fields due to confinement. In this paper we present theoretical and simulation studies of the pattern formation of nematic liquid crystal disclination loops under capillary confinement including branching processes from a m=+1 disclination line to two m=+1/2 disclination curves that describe the postnucleation and growth regime of the textural transformation from radial to planar polar textures. The early postnucleation and growth of emerging disclination loops in cylindrical capillaries are characterized using analytical and computational methods based on the nematic elastica that takes into account line tension and line bending stiffness. Using subdiffusive growth and constant loop anisotropy, we found that the solution to the nematic elastica is a cusped elliptical geometry characterized by exponential curvature variations. The scaling laws that govern the loop growth reflect the tension to bending elasticity balance and reveal that the loop dilation rate depends on the curvature and normal velocity of the disclination. The line energy growth is accommodated by the decrease in branch-point curvature. These findings contribute to the evolving understanding of textural transformations in nematic liquid crystals under confinement using the nematic elastic methodology.

Mechanisms and shape predictions of nematic disclination branching under conical confinement

Liquid crystals (LCs) are self-organizing anisotropic viscoelastic soft materials that flow like viscous liquids and display anisotropies like crystals. When a nematic liquid crystal is confined to a capillary tube with strong anchoring conditions, disclination defects of higher (+1) and lower (+1/2) topological charges can coexist, connected through a defect branch point. The shape of the +1/2 disclination lines emanating from the branch point are functions of confinement and bulk elasticity. Previous work shows that nematic liquid crystals under cylindrical confinement display a radial (one +1 line)-to-planar polar (two +1/2 lines) defect texture transition through the nucleation and uniform motion of a disclination branch point. Here we present analysis, scaling and modeling based on a non-linear non-local nematic elastic equation that shows that a branch point also can be generated from disclinations in a liquid crystal confined to different conical geometries with homeotropic anchoring conditions. The cone aperture increases the bending stiffness but decreases the curvature of the disclination. These competing effects lead to a decrease in the total disclination curvature, increase in elastic energy and volume of the branching region. The results are summarized into power laws and integrated into a shape/energy diagram that reveals the effects of confinement and its gradient (cone angle) on disclination shape selection. These new findings are useful to assess the Frank elasticity of new nematic liquid crystals and to predict novel defect structures in complex confinement, including biological microfluidics and mesophase fiber spinning.

Twist transition of nematic hyperbolic hedgehogs

Stability of an idealized hyperbolic hedgehog in a nematic liquid crystal against a twist transition is investigated by extending the methodology of Rüdinger and Stark [Liq. Cryst. 26, 753 (1999)], where the hedgehog is confined between two concentric spheres. In the ideal hyperbolic-hedgehog the molecular orientation is assumed to rotate proportionally with respect to the inclination angle, θ (and in the opposite sense). However, when splay, k11, and bend, k33, moduli differ this proportionality is lost and the liquid crystal deforms relative to the ideal with bend and splay. Although slight, these deformations are shown to significantly shift the transition if k11/k33 is small. By increasing the degree of confinement the twist transition can be inhibited, a characteristic both hyperbolic and radial hedgehogs have in common. The twist transition of a hyperbolic defect that accompanies a particle is found to be well predicted by the earlier stability analysis of a thick shell.

Exploiting imperfections in the bulk to direct assembly of surface colloids

We exploit the long-ranged elastic fields inherent to confined nematic liquid crystals (LCs) to assemble colloidal particles trapped at the LC interface into reconfigurable structures with complex symmetries and packings. Spherical colloids with homeotropic anchoring trapped at the interface between air and the nematic LC 4-cyano-4'-pentylbiphenyl create quadrupolar distortions in the director field causing particles to repel and consequently form close-packed assemblies with a triangular habit. Here, we report on complex open structures organized via interactions with defects in the bulk. Specifically, by confining the nematic LC in an array of microposts with homeotropic anchoring conditions, we cause defect rings to form at well-defined locations in the bulk of the sample. These defects source elastic deformations that direct the assembly of the interfacially trapped colloids into ring-like assemblies, which recapitulate the defect geometry even when the microposts are completely immersed in the nematic. When the surface density of the colloids is high, they form a ring near the defect and a hexagonal lattice far from it. Because topographically complex substrates are easily fabricated and LC defects are readily reconfigured, this work lays the foundation for a versatile, robust mechanism to direct assembly dynamically over large areas by controlling surface anchoring and associated bulk defect structure.

Finite-size effects on order reconstruction around nematic defects

By use of the Landau-de Gennes phenomenological theory, we study the texture of a nematic liquid crystal confined within a hybrid cell. Precisely, we consider cylindrically symmetric solutions containing topological defects dictated by appropriate boundary conditions. We focus our attention on cells whose dimensions are comparable with the biaxial correlation length xi(b) . For such severe confinements the order reconstruction (OR) configuration could be stable. Its structural details reflect the balance among boundary-enforced frustration, elastic penalties, and finite-size effects. In particular, we analyze the interplay between finite-size effects and topological defects. We show that defects are always pinned to the negatively (planar) uniaxial sheet of the OR structure. The presence of a ring defect can dramatically increase the critical threshold below which the OR structure is stable.

Quadrupolar particles in a nematic liquid crystal: effects of particle size and shape

We investigate the effects of particle size and shape on the quadrupolar (Saturn-ring-like) defect structures formed by a nematic liquid crystal around nm-sized and mum -sized particles with spherical and spherocylindrical shapes. We also report results for the potentials of mean force in our systems, calculated using a mesoscale theory for the tensor order parameter Q of the nematic. Our results indicate that for pairs of nm-sized particles in close proximity, the nematic forms "entangled hyperbolic" defect structures regardless of the shape of the nanoparticles. In our calculations with nanoparticles we did not observe any other entangled or unentangled defect structures, in contrast to what was reported for pairs of mum -sized spherical particles. Such a finding suggests that the "entangled hyperbolic" defect structures are the most stable for pairs of nanoparticles in close proximity. For pairs of mum -sized particles, our results indicate that the nematic forms entangled "figure-of-eight" defect structures around pairs of spheres and spherocylinders. Our results suggest that the transition between "entangled hyperbolic" and figure-of-eight defect structures takes place when the diameter of the particle is between D=100 nm and 1 microm . We have also calculated the torques that develop when pairs of spherocylindrical nanoparticles in a nematic approach each other. Our calculations suggest that the nematic-mediated interactions between the nm-sized particles are fairly strong, up to 5700 k{B}T for the case of pairs of spherocylindrical nanoparticles arranged with their long axis parallel to each other. Furthermore, these interactions can make the particles to bind together at specific locations, and thus could be used to assemble the particles into ordered structures with different morphologies.

Fingered core structure of nematic boojums

Using the Landau-de Gennes phenomenological approach, we study the fine biaxial core structure of a boojum residing on the surface of a nematic liquid crystal phase. The core is formed by a negatively uniaxial finger, surrounded by a shell with maximal biaxiality. The characteristic finger's length and the shell's width are comparable to the biaxial correlation length. The finger tip is melted for topological reasons. Upon decreasing the surface anchoring strength below a critical value, the finger gradually leaves the bulk and it is expelled through the surface.