Identifying critical residues in protein folding: Insights from phi-value and P(fold) analysis

Sequence analysis on the information of folding initiation segments in ferredoxin-like fold proteins

BACKGROUND

While some studies have shown that the 3D protein structures are more conservative than their amino acid sequences, other experimental studies have shown that even if two proteins share the same topology, they may have different folding pathways. There are many studies investigating this issue with molecular dynamics or Go-like model simulations, however, one should be able to obtain the same information by analyzing the proteins' amino acid sequences, if the sequences contain all the information about the 3D structures. In this study, we use information about protein sequences to predict the location of their folding segments. We focus on proteins with a ferredoxin-like fold, which has a characteristic topology. Some of these proteins have different folding segments.

RESULTS

Despite the simplicity of our methods, we are able to correctly determine the experimentally identified folding segments by predicting the location of the compact regions considered to play an important role in structural formation. We also apply our sequence analyses to some homologues of each protein and confirm that there are highly conserved folding segments despite the homologues' sequence diversity. These homologues have similar folding segments even though the homology of two proteins' sequences is not so high.

CONCLUSION

Our analyses have proven useful for investigating the common or different folding features of the proteins studied.

Structural and energetic determinants of co-translational folding

We performed extensive lattice Monte Carlo simulations of ribosome-bound stalled nascent chains (RNCs) to explore the relative roles of native topology and non-native interactions in co-translational folding of small proteins. We found that the formation of a substantial part of the native structure generally occurs towards the end of protein synthesis. However, multi-domain structures, which are rich in local interactions, are able to develop gradually during chain elongation, while those with proximate chain termini require full protein synthesis to fold. A detailed assessment of the conformational ensembles populated by RNCs with different lengths reveals that the directionality of protein synthesis has a fine-tuning effect on the probability to populate low-energy conformations. In particular, if the participation of non-native interactions in folding energetics is mild, the formation of native-like conformations is majorly determined by the properties of the contact map around the tethering terminus. Likewise, a pair of RNCs differing by only 1-2 residues can populate structurally well-resolved low energy conformations with significantly different probabilities. An interesting structural feature of these low-energy conformations is that, irrespective of native structure, their non-native interactions are always long-ranged and marginally stabilizing. A comparison between the conformational spectra of RNCs and chain fragments folding freely in the bulk reveals drastic changes amongst the two set-ups depending on the native structure. Furthermore, they also show that the ribosome may enhance (up to 20%) the population of low energy conformations for chains folding to native structures dominated by local interactions. In contrast, a RNC folding to a non-local topology is forced to remain largely unstructured but can attain low energy conformations in bulk.

How difficult is it to fold a knotted protein? In silico insights from surface-tethered folding experiments

We explore the effect of surface tethering on the folding process of a lattice protein that contains a trefoil knot in its native structure via Monte Carlo simulations. We show that the outcome of the tethering experiment depends critically on which terminus is used to link the protein to a chemically inert plane. In particular, if surface tethering occurs at the bead that is closer to the knotted core the folding rate becomes exceedingly slow and the protein is not able to find the native structure in all the attempted folding trajectories. Such low folding efficiency is also apparent from the analysis of the probability of knot formation, p(knot), as a function of nativeness. Indeed, p(knot) increases abruptly from ∼0 to ∼1 only when the protein has more than 80% of its native contacts formed, showing that a highly compact conformation must undergo substantial structural re-arrangement in order to get effectively knotted. When the protein is surface tethered by the bead that is placed more far away from the knotted core p(knot) is higher than in the other folding setups (including folding in the bulk), especially if conformations are highly native-like. These results show that the mobility of the terminus closest to the knotted core is critical for successful folding of trefoil proteins, which, in turn, highlights the importance of a knotting mechanism that is based on a threading movement of this terminus through a knotting loop. The results reported here predict that if this movement is blocked, knotting occurs via an alternative mechanism, the so-called spindle mechanism, which is prone to misfolding. Our simulations show that in the three considered folding setups the formation of the knot is typically a late event in the folding process. We discuss the implications of our findings for co-translational folding of knotted trefoils.

Why do protein folding rates correlate with metrics of native topology?

For almost 15 years, the experimental correlation between protein folding rates and the contact order parameter has been under scrutiny. Here, we use a simple simulation model combined with a native-centric interaction potential to investigate the physical roots of this empirical observation. We simulate a large set of circular permutants, thus eliminating dependencies of the folding rate on other protein properties (e.g. stability). We show that the rate-contact order correlation is a consequence of the fact that, in high contact order structures, the contact order of the transition state ensemble closely mirrors the contact order of the native state. This happens because, in these structures, the native topology is represented in the transition state through the formation of a network of tertiary interactions that are distinctively long-ranged.

Identification of functional motions in the adenylate kinase (ADK) protein family by computational hybrid approaches

Based on integrative computational hybrid approaches that combined statistical coupling analysis (SCA), molecular dynamics (MD), and normal mode analysis (NMA), evolutionarily coupled residues involved in functionally relevant motion in the adenylate kinase protein family were identified. The hybrids identified four top-ranking site pairs that belong to a conserved hydrogen bond network that is involved in the enzyme's flexibility. A second group of top-ranking site pairs was identified in critical regions for functional dynamics, such as those related to enzymatic turnover. The high consistency of the results obtained by SCA with NMA (SCA.NMA) and by SCA.MD hybrid analyses suggests that suitable replacement of the matrix of cross-correlation analysis of atomic fluctuations (derived by using NMA) with those based on MD contributes to the identification of such sites by means of a fast computational calculation. The analysis presented here strongly supports the hypothesis that evolutionary forces, such as coevolution at the sequence level, have promoted functional dynamic properties of the adenylate kinase protein family. Finally, these hybrid approaches can be used to identify, at the residue level, protein motion coordination patterns not previously observed, such as in hinge regions.

Non-native interactions play an effective role in protein folding dynamics

Systematic Monte Carlo simulations of simple lattice models show that the final stage of protein folding is an ordered process where native contacts get locked (i.e., the residues come into contact and remain in contact for the duration of the folding process) in a well-defined order. The detailed study of the folding dynamics of protein-like sequences designed as to exhibit different contact energy distributions, as well as different degrees of sequence optimization (i.e., participation of non-native interactions in the folding process), reveals significant differences in the corresponding locking scenarios--the collection of native contacts and their average locking times, which are largely ascribable to the dynamics of non-native contacts. Furthermore, strong evidence for a positive role played by non-native contacts at an early folding stage was also found. Interestingly, for topologically simple target structures, a positive interplay between native and non-native contacts is observed also toward the end of the folding process, suggesting that non-native contacts may indeed affect the overall folding process. For target models exhibiting clear two-state kinetics, the relation between the nucleation mechanism of folding and the locking scenario is investigated. Our results suggest that the stabilization of the folding transition state can be achieved through the establishment of a very small network of native contacts that are the first to lock during the folding process.

Constrained proper sampling of conformations of transition state ensemble of protein folding

Characterizing the conformations of protein in the transition state ensemble (TSE) is important for studying protein folding. A promising approach pioneered by Vendruscolo et al. [Nature (London) 409, 641 (2001)] to study TSE is to generate conformations that satisfy all constraints imposed by the experimentally measured φ values that provide information about the native likeness of the transition states. Faísca et al. [J. Chem. Phys. 129, 095108 (2008)] generated conformations of TSE based on the criterion that, starting from a TS conformation, the probabilities of folding and unfolding are about equal through Markov Chain Monte Carlo (MCMC) simulations. In this study, we use the technique of constrained sequential Monte Carlo method [Lin et al., J. Chem. Phys. 129, 094101 (2008); Zhang et al. Proteins 66, 61 (2007)] to generate TSE conformations of acylphosphatase of 98 residues that satisfy the φ-value constraints, as well as the criterion that each conformation has a folding probability of 0.5 by Monte Carlo simulations. We adopt a two stage process and first generate 5000 contact maps satisfying the φ-value constraints. Each contact map is then used to generate 1000 properly weighted conformations. After clustering similar conformations, we obtain a set of properly weighted samples of 4185 candidate clusters. Representative conformation of each of these cluster is then selected and 50 runs of Markov chain Monte Carlo (MCMC) simulation are carried using a regrowth move set. We then select a subset of 1501 conformations that have equal probabilities to fold and to unfold as the set of TSE. These 1501 samples characterize well the distribution of transition state ensemble conformations of acylphosphatase. Compared with previous studies, our approach can access much wider conformational space and can objectively generate conformations that satisfy the φ-value constraints and the criterion of 0.5 folding probability without bias. In contrast to previous studies, our results show that transition state conformations are very diverse and are far from nativelike when measured in cartesian root-mean-square deviation (cRMSD): the average cRMSD between TSE conformations and the native structure is 9.4 Å for this short protein, instead of 6 Å reported in previous studies. In addition, we found that the average fraction of native contacts in the TSE is 0.37, with enrichment in native-like β-sheets and a shortage of long range contacts, suggesting such contacts form at a later stage of folding. We further calculate the first passage time of folding of TSE conformations through calculation of physical time associated with the regrowth moves in MCMC simulation through mapping such moves to a Markovian state model, whose transition time was obtained by Langevin dynamics simulations. Our results indicate that despite the large structural diversity of the TSE, they are characterized by similar folding time. Our approach is general and can be used to study TSE in other macromolecules.

The folding of knotted proteins: insights from lattice simulations

We carry out systematic Monte Carlo simulations of Gō lattice proteins to investigate and compare the folding processes of two model proteins whose native structures differ from each other due to the presence of a trefoil knot located near the terminus of one of the protein chains. We show that the folding time of the knotted fold is larger than that of the unknotted protein and that this difference in folding time is particularly striking in the temperature region below the optimal folding temperature. Both proteins display similar folding transition temperatures, which is indicative of similar thermal stabilities. By using the folding probability reaction coordinate as an estimator of folding progression we have found out that the formation of the knot is mainly a late folding event in our shallow knot system.

The nucleation mechanism of protein folding: a survey of computer simulation studies

The nucleation mechanism of protein folding, originally proposed by Baldwin in the early 1970s, was firstly observed by Shakhnovich and co-workers two decades later in the context of Monte Carlo simulations of a simple lattice model. At about the same time the extensive use of φ-value analysis provided the first experimental evidence that the folding of Chymotrypsin-inhibitor 2, a small single-domain protein, which folds with two-state kinetics, is also driven by a nucleation mechanism. Since then, the nucleation mechanism is generally considered the most common form of folding mechanism amongst two-state proteins. However, recent experimental data has put forward the idea that this may not necessarily be so, since the accuracy of the experimentally determined φ values, which are used to identify the critical (i.e. nucleating) residues, is typically poor. Here, we provide a survey of in silico results on the nucleation mechanism, ranging from simple lattice Monte Carlo to more sophisticated off-lattice molecular dynamics simulations, and discuss them in light of experimental data.

Prediction of the protein folding core: application to the immunoglobulin fold

We propose an algorithm that allows predicting residues important for the formation of the structure of globular proteins. It relies on a simulation that detects the amino acids presenting a maximum number of neighbours during the early steps of the folding process. They have been called MIR (Most Interacting Residues). Independently, description of the protein structures in fragments with closed ends shows the correlation between these extremities and the core of the globules. These fragments are of rather constant length, typically between 20 and 25 amino acids, and we have previously shown that their extremities are preferentially occupied by MIR. Introduction of rules derived from this fragment analysis of tertiary structures allows to smooth the distribution of MIR, for a better match between TEF ends and MIR. In order to assess this prediction of the folding core, a large family of structures has been used, with sequences as different as possible. A dataset of 56 immunoglobulin structures of various functions but common fold has been used in this study. This fold was chosen because it is one of the most populated with a large amount of data available on its nucleus. In the immunoglobulin domain, "functional and structural load is clearly separated: loops are responsible for binding and recognition while interactions between several residues of the buried core provide stability and fast folding"[1]. We then determined the positions susceptible of high importance for the folding process to occur and compared them to published data, either to High Throw Out Order (HTOO), Conservatism of Conservatism (CoC) or Phi value experiments. It results a reasonable agreement between the positions that we predict and experimental data. Besides, our prediction goes beyond the simple use of a null solvent accessibility of amino acids as a criterion to predict the core. We find the same quality of our prediction on the flavodoxin like superfamily.

Analysis of the free-energy surface of proteins from reversible folding simulations

Computer generated trajectories can, in principle, reveal the folding pathways of a protein at atomic resolution and possibly suggest general and simple rules for predicting the folded structure of a given sequence. While such reversible folding trajectories can only be determined ab initio using all-atom transferable force-fields for a few small proteins, they can be determined for a large number of proteins using coarse-grained and structure-based force-fields, in which a known folded structure is by construction the absolute energy and free-energy minimum. Here we use a model of the fast folding helical λ-repressor protein to generate trajectories in which native and non-native states are in equilibrium and transitions are accurately sampled. Yet, representation of the free-energy surface, which underlies the thermodynamic and dynamic properties of the protein model, from such a trajectory remains a challenge. Projections over one or a small number of arbitrarily chosen progress variables often hide the most important features of such surfaces. The results unequivocally show that an unprojected representation of the free-energy surface provides important and unbiased information and allows a simple and meaningful description of many-dimensional, heterogeneous trajectories, providing new insight into the possible mechanisms of fast-folding proteins.

The process of protein folding is a complex transition from a disordered to an ordered state. Here, we simulate a specific fast-folding protein at the point at which the native and denatured states are at equilibrium and show that obtaining an accurate description of the mechanisms of folding and unfolding is far from trivial. Using simple quantities which quantify the degree of native order is, in the case of this protein, clearly misleading. We show that an unbiased representation of the free-energy surface can be obtained; using such a representation we are able to redesign the landscape and thus modify, upon site-specific “mutations”, the folding and unfolding rates. This leads us to formulate a hypothesis to explain the very fast folding of many proteins.