Percolation of high-density polymer regions in nanocomposites: The underlying property for mechanical reinforcement

Chitosan-ZnO Nanocomposites Assessed by Dielectric, Mechanical, and Piezoelectric Properties

The aim of this work is to structurally characterize chitosan-zinc oxide nanoparticles (CS-ZnO NPs) films in a wide range of NPs concentration (0-20 wt.%). Dielectric, conductivity, mechanical, and piezoelectric properties are assessed by using thermogravimetry, FTIR, XRD, mechanical, and dielectric spectroscopy measurements. These analyses reveal that the dielectric constant, Young's modulus, and piezoelectric constant (d33) exhibit a strong dependence on nanoparticle concentration such that maximum values of referred properties are obtained at 15 wt.% of ZnO NPs. The piezoelectric coefficient d33 in CS-ZnO nanocomposite films with 15 wt.% of NPs (d33 = 65.9 pC/N) is higher than most of polymer-ZnO nanocomposites because of the synergistic effect of piezoelectricity of NPs, elastic properties of CS, and optimum NPs concentration. A three-phase model is used to include the chitosan matrix, ZnO NPs, and interfacial layer with dielectric constant higher than that of neat chitosan and ZnO. This layer between nanoparticles and matrix is due to strong interactions between chitosan's side groups with ZnO NPs. The understanding of nanoscale properties of CS-ZnO nanocomposites is important in the development of biocompatible sensors, actuators, nanogenerators for flexible electronics and biomedical applications.

Engineering interfacial entropic effects to generate giant viscosity changes in nanoparticle embedded polymer thin films

Thin polymer and polymer nanocomposite (PNC) films are being extensively used as advanced functional coating materials in various technological applications. Since it is widely known that various properties of these thin films, especially their thermo-mechanical behavior, can be considerably different from the bulk depending on the thickness as well as interaction with surrounding media, it is imperative to study these properties directly on the films. However, quite often, it becomes difficult to perform these measurements reliably due to a dearth of techniques, especially to measure mechnical or transport properties like the viscosity of thin polymer or PNC films. Here, we demonstrate a new method to study the viscosity of PNC thin films using atomic force microscopy based force-distance spectroscopy. Using this method we investigated viscosity and the glass transition, Tg, of PNC thin films consisting of polymer grafted nanoparticles (PGNPs) embedded in un-entangled homopolymer melt films. The PGNP-polymer interfacial entropic interaction parameter, f, operationally controlled through the ratio of grafted and matrix molecular weight, was systematically tuned while maintaining good dispersion even at very high PGNP loadings, φ. We observed both a significant reduction (low f) and giant enhancement (high f) in the viscosity of the PNC thin films with the effect becoming more prominent with increasing φ. Significantly, none of the established theoretical models for viscosity changes observed earlier in suspensions or polymer nanocomposites can explain the observed viscosity variation. Our results thus not only demonstrate the tunability of the interfacial entropic effect to facilitate a dramatic change in the viscosity of PNC coatings, which could be of great utility in various applications of these materials, but also suggest a new regime of viscosity variation in athermal PNC films indicating the possible need for a new theoretical model.

Multiscale Simulation of Branched Nanofillers on Young's Modulus of Polymer Nanocomposites

Nanoscale tailoring the filler morphology in experiment offers new opportunities to modulate the mechanical properties of polymer nanocomposites. Based on the conventical rod and experimentally available tetrapod filler, I compare the nanofiller dispersion and elastic moduli of these two kinds of nanocomposites via molecular dynamics simulation and a lattice spring model. The results show that the tetrapod has better dispersion than the rod, which is facilitate forming the percolation network and thus benefitting the mechanical reinforcement. The elastic modulus of tetrapod filled nanocomposites is much higher than those filled with rod, and the modulus disparity strongly depends on the aspect ratio of fillers and particle-polymer interaction, which agrees well with experimental results. From the stress distribution analysis on single particles, it is concluded that the mechanical disparity between bare rod and tetrapod filled composites is due to the effective stress transfer in the polymer/tetrapod composites.

Entanglements in polymer nanocomposites containing spherical nanoparticles

We investigate the polymer packing around nanoparticles and polymer/nanoparticle topological constraints (entanglements) in nanocomposites containing spherical nanoparticles in comparison to pure polymer melts using molecular dynamics (MD) simulations. The polymer-nanoparticle attraction leads to good dispersion of nanoparticles. We observe an increase in the number of topological constraints (decrease of total entanglement length Ne with nanoparticle loading in the polymer matrix) in nanocomposites due to nanoparticles, as evidenced by larger contour lengths of the primitive paths. An increase of the nanoparticle radius reduces the polymer-particle entanglements. These studies demonstrate that the interaction between polymers and nanoparticles does not affect the total entanglement length because in nanocomposites with small nanoparticles, the polymer-nanoparticles topological constraints dominate.