Synthetic aperture imaging for multilayer cylindrical object using an exterior rotating transducer

A SAFT Method for the Detection of Void Defect inside a Ballastless Track Structure Using Ultrasonic Array Sensors

High-precision ultrasound imaging of void defects is critical for the performance and safety assessment of ballastless track structures. The sound propagation velocity of each layer in the ballastless track structure is quite different. However, the traditional concrete Synthetic Aperture Focusing Technique (SAFT) ultrasound imaging method is based on the assumption that the concrete has a single constant shear wave velocity. Thus, it is not a suitable method for the ultrasonic imaging of multilayer structures. In this paper, a Multilayer SAFT high-precision ultrasound imaging method is proposed. It is based on the ray-tracing technique and uses the Fermat principle to find the refraction point that minimizes the delay of the acoustic wave propagation path at the interface of the discrete layers. Then, the acoustic wave propagation path is segmented by the position of the refraction point, and the propagation delay of the ultrasonic wave is obtained segment by segment. Thus, the propagation delay of the ultrasonic wave is obtained one by one, so that the propagation delay of the ultrasonic wave in the multilayer structure can be accurately obtained. Finally, the focused image is obtained according to the SAFT imaging algorithm. The finite element simulation and experimental results show that the Multilayer SAFT imaging method can accurately track the propagation path of the ultrasonic wave in ballastless track structures, as well as accurately calculate the propagation delay of the ultrasonic wave and the lengths of void defects. The high accuracy of the Multilayer SAFT imaging represents a significant improvement compared to traditional SAFT imaging.

Ultrasonic Guided Wave-Based Circumferential Scanning of Plates Using a Synthetic Aperture Focusing Technique

Tanks are essential facilities for oil and chemical storage and transportation. As indispensable parts, the tank floors have stringent nondestructive testing requirements owing to their severe operating conditions. In this article, a synthetic aperture focusing technology method is proposed for the circumferential scanning of the tank floor from the edge outside the tank using ultrasonic guided waves. The zeroth shear horizontal (SH0) mode is selected as an ideal candidate for plate inspection, and the magnetostrictive sandwich transducer (MST) is designed and manufactured for the generation and receiving of the SH0 mode. Based on the exploding reflector model (ERM), the relationships between guided wave fields at different radii of polar coordinates are derived in the frequency domain. The defect spot is focused when the sound field is calculated at the radius of the defect. Numerical and experimental validations are performed for the defect inspection in an iron plate. The angular bandwidth of the defect spot is used as an index for the angular resolution. The results of the proposed method show significant improvement compared to those obtained by the B-scan method, and it is found to be superior to the conventional method—named delay and sum (DAS)—in both angular resolution and calculation efficiency.

Frequency domain synthetic aperture focusing technique for variable-diameter cylindrical components

Ultrasonic non-destructive testing (UNDT) plays an important role in ensuring the quality of cylindrical components of equipment such as pipes and axles. As the acoustic beam width widens along propagation depths, the diffraction of acoustic wave becomes serious and the images of defects will be interfered with. To precisely evaluate the dimensions of defects and flaws concealed in components, the synthetic aperture focusing technique (SAFT) is introduced to enhance the image resolutions. Conventional SAFTs have been successfully implemented for the ultrasonic imaging of normal cylinders, while solutions for complex ones, such as variable-diameter cylinders, are still lacking. To overcome this problem, a frequency-domain SAFT for variable-diameter cylindrical components is proposed. This algorithm is mainly based on acoustic field extrapolation, which is modified from cylindrical phase shift migration with the aid of split-step Fourier. After a series of extrapolations, a high-resolution ultrasound image can be reconstructed using a particular imaging condition. According to the experimental results, the proposed method yields low side lobes and high resolutions for flat transducers. Its attainable angular resolution relies on the transducer diameter D and scanning radius R and approximates D/(2R).

A blind deconvolution method for attenuative materials based on asymmetrical Gaussian model

During propagation in attenuative materials, ultrasonic waves are distorted by frequency-dependent acoustic attenuation. As a result, reference signals for blind deconvolution in attenuative materials are asymmetrical and should be accurately estimated by considering attenuation. In this study, an asymmetrical Gaussian model is established to estimate the reference signals from these materials, and a blind deconvolution method based on this model is proposed. Based on the symmetrical Gaussian model, the asymmetrical one is formulated by adding an asymmetrical coefficient. Upon establishing the model, the reference signal for blind deconvolution is determined via maximum likelihood estimation, and the blind deconvolution is implemented with an orthogonal matching pursuit algorithm. To verify the feasibility of the established model, spectra of ultrasonic signals from attenuative polyethylene plates with different thicknesses are measured and estimated. The proposed blind deconvolution method is applied to the A-scan signal and B-scan image from attenuative materials. Results demonstrate that the proposed method is capable of separating overlapping echoes and therefore achieves a high temporal resolution.