Synthesis and characterization of a nanocrystalline diamond aerogel

Synthesis, Surface Chemistry, and Applications of Non-Zero-Dimensional Diamond Nanostructures

Diamond nanomaterials are renowned for their exceptional properties, which include the inherent attributes of bulk diamond. Additionally, they exhibit unique characteristics at the nanoscale, including high specific surface areas, tunable surface structure, and excellent biocompatibility. These multifaceted attributes have piqued the interest of researchers globally, leading to an extensive exploration of various diamond nanostructures in a myriad of applications. This review focuses on non-zero-dimensional (non-0D) diamond nanostructures including diamond films and extended diamond nanostructures, such as diamond nanowires, nanoplatelets, and diamond foams. It delves into the fabrication, modification, and diverse applications of non-0D diamond nanostructures. This review begins with a concise review of the preparation methods for different types of diamond films and extended nanostructures, followed by an exploration of the intricacies of surface termination and the process of immobilizing target moieties of interest. It then transitions into an exploration of the applications of diamond films and extended nanostructures in the fields of biomedicine and electrochemistry. In the concluding section, this article provides a forward-looking perspective on the current state and future directions of diamond films and extended nanostructures research, offering insights into the opportunities and challenges that lie ahead in this exciting field.

Improving the creation of SiV centers in diamond via sub-μs pulsed annealing treatment

Silicon-vacancy (SiV) centers in diamond are emerging as promising quantum emitters in applications such as quantum communication and quantum information processing. Here, we demonstrate a sub-μs pulsed annealing treatment that dramatically increases the photoluminescence of SiV centers in diamond. Using a silane-functionalized adamantane precursor and a laser-heated diamond anvil cell, the temperature and energy conditions required to form SiV centers in diamond were mapped out via an optical thermometry system with an accuracy of ±50 K and a 1 μs temporal resolution. Annealing scheme studies reveal that pulsed annealing can obviously minimize the migration of SiV centers out of the diamond lattice, and a 2.5-fold increase in the number of emitting centers was achieved using a series of 200-ns pulses at a 50 kHz repetition rate via acousto-optic modulation. Our study provides a novel pulsed annealing treatment approach to improve the efficiency of the creation of SiV centers in diamond.

Aerogel-Based Biomaterials for Biomedical Applications: From Fabrication Methods to Disease-Targeting Applications

Aerogel-based biomaterials are increasingly being considered for biomedical applications due to their unique properties such as high porosity, hierarchical porous network, and large specific pore surface area. Depending on the pore size of the aerogel, biological effects such as cell adhesion, fluid absorption, oxygen permeability, and metabolite exchange can be altered. Based on the diverse potential of aerogels in biomedical applications, this paper provides a comprehensive review of fabrication processes including sol-gel, aging, drying, and self-assembly along with the materials that can be used to form aerogels. In addition to the technology utilizing aerogel itself, it also provides insight into the applicability of aerogel based on additive manufacturing technology. To this end, how microfluidic-based technologies and 3D printing can be combined with aerogel-based materials for biomedical applications is discussed. Furthermore, previously reported examples of aerogels for regenerative medicine and biomedical applications are thoroughly reviewed. A wide range of applications with aerogels including wound healing, drug delivery, tissue engineering, and diagnostics are demonstrated. Finally, the prospects for aerogel-based biomedical applications are presented. The understanding of the fabrication, modification, and applicability of aerogels through this study is expected to shed light on the biomedical utilization of aerogels.

Electronic Structures and Spectroscopic Signatures of Noble-Gas-Doped Nanodiamonds

Fluorescent nanodiamonds, that is, those containing optically active defects, have attracted interest for their ability to be used as qubits; for in vivo imaging; and as sensors for spin, stress, and temperature. One of the most commonly studied nanodiamond color centers is the nitrogen vacancy. However, there is strong interest in discovering other impurity centers that provide localized midband gap transitions. Noble gas atoms have garnered attention since they have been discovered within nanodiamonds produced through high-pressure-high-temperature laser-heated diamond anvil cell synthesis methods, where they are commonly used as hydrostatic pressure media. Noble gas atoms that exist in macrosized natural or synthetic diamonds have been shown to be able to form color centers. This research uses ab initio density functional theory and cluster models to systematically study the localized electronic structure for group VIII impurities of nanodiamond, including helium, neon, argon, krypton, and xenon. An in-depth examination of the interaction between the noble gas atom and diamond lattice has been carried out. The changes to the vibrational and UV/vis absorption spectra have been analyzed. It was determined that the energetically preferred geometry is dependent on the atom size. Most noble gas defects are stabilized within the nanodiamond lattice and exist in tetrahedral interstitial positions, except for the largest noble gas studied in this work, Xe, which was determined to prefer a substitutional configuration. Both Kr and Xe are expected to be able to manifest visible/near-IR optical responses when included in the diamond lattice.

Nanoporous Amorphous Carbon with Exceptional Ultra-High Strength

Nanoporous materials show a promising combination of mechanical properties in terms of their relative density; while there are numerous studies based on metallic nanoporous materials, here we focus on amorphous carbon with a bicontinuous nanoporous structure as an alternative to control the mechanical properties for the function of filament composition.Using atomistic simulations, we study the mechanical response of nanoporous amorphous carbon with 50% porosity, with sp3 content ranging from 10% to 50%. Our results show an unusually high strength between 10 and 20 GPa as a function of the %sp3 content. We present an analytical analysis derived from the Gibson-Ashby model for porous solids, and from the He and Thorpe theory for covalent solids to describe Young's modulus and yield strength scaling laws extremely well, revealing also that the high strength is mainly due to the presence of sp3 bonding. Alternatively, we also find two distinct fracture modes: for low %sp3 samples, we observe a ductile-type behavior, while high %sp3 leads to brittle-type behavior due to high high shear strain clusters driving the carbon bond breaking that finally promotes the filament fracture. All in all, nanoporous amorphous carbon with bicontinuous structure is presented as a lightweight material with a tunable elasto-plastic response in terms of porosity and sp3 bonding, resulting in a material with a broad range of possible combinations of mechanical properties.

Preservation of high-pressure volatiles in nanostructured diamond capsules

High pressure induces dramatic changes and novel phenomena in condensed volatiles^1,2 that are usually not preserved after recovery from pressure vessels. Here we report a process that pressurizes volatiles into nanopores of type 1 glassy carbon precursors, converts glassy carbon into nanocrystalline diamond by heating and synthesizes free-standing nanostructured diamond capsules (NDCs) capable of permanently preserving volatiles at high pressures, even after release back to ambient conditions for various vacuum-based diagnostic probes including electron microscopy. As a demonstration, we perform a comprehensive study of a high-pressure argon sample preserved in NDCs. Synchrotron X-ray diffraction and high-resolution transmission electron microscopy show nanometre-sized argon crystals at around 22.0 gigapascals embedded in nanocrystalline diamond, energy-dispersive X‑ray spectroscopy provides quantitative compositional analysis and electron energy-loss spectroscopy details the chemical bonding nature of high-pressure argon. The preserved pressure of the argon sample inside NDCs can be tuned by controlling NDC synthesis pressure. To test the general applicability of the NDC process, we show that high-pressure neon can also be trapped in NDCs and that type 2 glassy carbon can be used as the precursor container material. Further experiments on other volatiles and carbon allotropes open the possibility of bringing high-pressure explorations on a par with mainstream condensed-matter investigations and applications.

Quantum Point Defects for Solid-State Laser Refrigeration

Herein, the role that point defects have played over the last two decades in realizing solid-state laser refrigeration is discussed. A brief introduction to the field of solid-state laser refrigeration is given with an emphasis on the fundamental physical phenomena and quantized electronic transitions that have made solid-state laser-cooling possible. Lanthanide-based point defects, such as trivalent ytterbium ions (Yb³⁺ ), have played a central role in the first demonstrations and subsequent development of advanced materials for solid-state laser refrigeration. Significant discussion is devoted to the quantum mechanical description of optical transitions in lanthanide ions, and their influence on laser cooling. Transition-metal point defects have been shown to generate substantial background absorption in ceramic materials, decreasing the overall efficiency of a particular laser refrigeration material. Other potential color centers based on fluoride vacancies with multiple potential charge states are also considered. In conclusion, novel materials for solid-state laser refrigeration, including color centers in diamond that have recently been proposed to realize the solid-state laser refrigeration of semiconducting materials, are discussed.

Surface Engineering of Ceramic Nanomaterials for Separation of Oil/Water Mixtures

Oil/water mixtures are a potentially major source of environmental pollution if efficient separation technology is not employed during processing. A large volume of oil/water mixtures is produced via many manufacturing operations in food, petrochemical, mining, and metal industries and can be exposed to water sources on a regular basis. To date, several techniques are used in practice to deal with industrial oil/water mixtures and oil spills such as in situ burning of oil, bioremediation, and solidifiers, which change the physical shape of oil as a result of chemical interaction. Physical separation of oil/water mixtures is in industrial practice; however, the existing technologies to do so often require either dissipation of large amounts of energy (such as in cyclones and hydrocyclones) or large residence times or inventories of fluids (such as in decanters). Recently, materials with selective wettability have gained attention for application in separation of oil/water mixtures and surfactant stabilized emulsions. For example, a superhydrophobic material is selectively wettable toward oil while having a poor affinity for the aqueous phase; therefore, a superhydrophobic porous material can easily adsorb the oil while completely rejecting the water from an oil/water mixture, thus physically separating the two components. The ease of separation, low cost, and low-energy requirements are some of the other advantages offered by these materials over existing practices of oil/water separation. The present review aims to focus on the surface engineering aspects to achieve selectively wettability in materials and its their relationship with the separation of oil/water mixtures with particular focus on emulsions, on factors contributing to their stability, and on how wettability can be helpful in their separation. Finally, the challenges in application of superwettable materials will be highlighted, and potential solutions to improve the application of these materials will be put forward.

Facile diamond synthesis from lower diamondoids

Carbon-based nanomaterials have exceptional properties that make them attractive for a variety of technological applications. Here, we report on the use of diamondoids (diamond-like, saturated hydrocarbons) as promising precursors for laser-induced high-pressure, high-temperature diamond synthesis. The lowest pressure and temperature (P-T) conditions that yielded diamond were 12 GPa (at ~2000 K) and 900 K (at ~20 GPa), respectively. This represents a substantially reduced transformation barrier compared with diamond synthesis from conventional (hydro)carbon allotropes, owing to the similarities in the structure and full sp³ hybridization of diamondoids and bulk diamond. At 20 GPa, diamondoid-to-diamond conversion occurs rapidly within <19 μs. Molecular dynamics simulations indicate that once dehydrogenated, the remaining diamondoid carbon cages reconstruct themselves into diamond-like structures at high P-T. This study is the first successful mapping of the P-T conditions and onset timing of the diamondoid-to-diamond conversion and elucidates the physical and chemical factors that facilitate diamond synthesis.

Monodisperse Five-Nanometer-Sized Detonation Nanodiamonds Enriched in Nitrogen-Vacancy Centers

Nanodiamonds containing negatively charged nitrogen-vacancy (NV^-) centers are versatile nanosensors thanks to their optical and spin properties. While currently most fluorescent nanodiamonds in use have at least a size of a few tens of nanometers, the challenge lies in engineering the smallest nanodiamonds containing a single NV^- defect. Such a tiny nanocrystal with a single NV^- center is an "optical spin label" for biomolecules, which can be detected in a fluorescence microscope. In this paper, we address two key issues toward this goal using detonation nanodiamonds (DNDs) of 4-5 nm in size. The DND samples are treated first with electron irradiation to create more vacancies. With the aid of electron paramagnetic resonance (EPR) spectroscopy, we confirm a steady increase of negatively charged NV^- centers with higher fluence. This leads to a 4 times higher concentration in NV^- defects after irradiation with 2 MeV electrons at a fluence of 5 × 10¹⁸ e^-/cm². Interestingly, we observe that the annealing of DND does not increase the number of NV^- centers, which is in contrast to bulk diamond and larger nanodiamonds. Since DNDs are strongly aggregated after the irradiation process, we apply a boiling acid treatment as a second step to fabricate monodisperse DNDs enriched in NV^- centers. These are two important steps toward "optical spin labels" having a single-digit nanometer range size that could be used for bioimaging and nanosensing.

High-pressure, high-temperature molecular doping of nanodiamond

The development of color centers in diamond as the basis for emerging quantum technologies has been limited by the need for ion implantation to create the appropriate defects. We present a versatile method to dope diamond without ion implantation by synthesis of a doped amorphous carbon precursor and transformation at high temperatures and high pressures. To explore this bottom-up method for color center generation, we rationally create silicon vacancy defects in nanodiamond and investigate them for optical pressure metrology. In addition, we show that this process can generate noble gas defects within diamond from the typically inactive argon pressure medium, which may explain the hysteresis effects observed in other high-pressure experiments and the presence of noble gases in some meteoritic nanodiamonds. Our results illustrate a general method to produce color centers in diamond and may enable the controlled generation of designer defects.

One-step sol–gel synthesis of hierarchically porous, flow-through carbon/silica monoliths

A novel synthesis of hierarchically porous, flow-through carbon/silica composite monoliths with ultra-high surface areas (~2600 m² g⁻¹), tunable porosity in micro/meso/macro-structured domains, and in situ growth of silver nanoparticles has been shown for catalytic use.

Size tunable synthesis of solution processable diamond nanocrystals

Diamond nanocrystals were synthesized catalyst-free from nanoporous carbon at high pressure and high temperature (HPHT). The synthesized nanocrystals have tunable diameters between 50 and 200 nm. The nanocrystals are dispersible in organic solvents such as acetone and are isotropic in nature as seen by dynamic light scattering.

Nanoscale materials for hyperthermal theranostics

Recently, the use of nanoscale materials has attracted considerable attention with the aim of designing personalized therapeutic approaches that can enhance both spatial and temporal control over drug release, permeability, and uptake. Potential benefits to patients include the reduction of overall drug dosages, enabling the parallel delivery of different pharmaceuticals, and the possibility of enabling additional functionalities such as hyperthermia or deep-tissue imaging (LIF, PET, etc.) that complement and extend the efficacy of traditional chemotherapy and surgery. This mini-review is focused on an emerging class of nanometer-scale materials that can be used both to heat malignant tissue to reduce angiogenesis and DNA-repair while simultaneously offering complementary imaging capabilities based on radioemission, optical fluorescence, magnetic resonance, and photoacoustic methods.

Emission and nonradiative decay of nanodiamond NV centers in a low refractive index environment

The nitrogen vacancy (NV) center is the most widely studied single optical defect in diamond with great potential for applications in quantum technologies. Development of practical single-photon devices requires an understanding of the emission under a range of conditions and environments. In this work, we study the properties of a single NV center in nanodiamonds embedded in an air-like silica aerogel environment which provides a new domain for probing the emission behavior of NV centers in nanoscale environments. In this arrangement, the emission rate is governed primarily by the diamond crystal lattice with negligible contribution from the surrounding environment. This is in contrast to the conventional approach of studying nanodiamonds on a glass coverslip. We observe an increase in the mean lifetime due to the absence of a dielectric interface near the emitting dipoles and a distribution arising from the irregularities in the nanodiamond geometry. Our approach results in the estimation of the mean quantum efficiency (~0.7) of the nanodiamond NV emitters.

A Special Material or a New State of Matter: A Review and Reconsideration of the Aerogel

The ultrahighly nanoporous aerogel is recognized as a state of matter rather than as a functional material, because of its qualitative differences in bulk properties, transitional density and enthalpy between liquid and gas, and diverse chemical compositions. In this review, the characteristics, classification, history and preparation of the aerogel were introduced. More attention was paid to the sol-gel method for preparing different kinds of aerogels, given its important role on bridging the synthetic parameters with the properties. At last, preparation of a novel single-component aerogel, design of a composite aerogel and industrial application of the aerogel were regarded as the research tendency of the aerogel state in the near future.

Pressure-induced phase transition and polymerization of tetracyanoethylene (TCNE)

We have studied the pressure-induced physical and chemical transformations of tetracyanoethylene (TCNE or C6N4) in diamond anvil cells using micro-Raman spectroscopy, laser-heating, emission spectroscopy, and synchrotron x-ray diffraction. The results indicate that TCNE in a quasi-hydrostatic condition undergoes a shear-induced phase transition at 10 GPa and then a chemical change to two-dimensional (2D) C=N polymers above 14 GPa. These phase and chemical transformations depend strongly on the state of stress in the sample and occur sluggishly in non-hydrostatic conditions over a large pressure range between 7 and 14 GPa. The x-ray diffraction data indicate that the phase transition occurs isostructurally within the monoclinic structure (P21∕c) without any apparent volume discontinuity and the C=N polymer is highly disordered but remains stable to 60 GPa-the maximum pressure studied. On the other hand, laser-heating of the C=N polymer above 25 GPa further converts to a theoretically predicted 3D C-N network structure, evident from an emergence of new Raman νs(C-N) at 1404 cm(-1) at 25 GPa and the visual appearance of translucent solid. The C-N product is, however, unstable upon pressure unloading below 10 GPa, resulting in a grayish powder that can be considered as nano-diamonds with high-nitrogen content at ambient pressure. The C-N product shows a strong emission line centered at 640 nm at 30 GPa, which linearly shifts toward shorter wavelength at the rate of -1.38 nm∕GPa. We conjecture that the observed red shift upon unloading pressure is due to increase of defects in the C-N product and thereby weakening of C-N bonds.

Mechanism for the amorphisation of diamond

The breakdown of the diamond lattice is explored by ion implantation and molecular dynamics simulations. We show that lattice breakdown is strain-driven, rather than damage-driven, and that the lattice persists until 16% of the atoms have been removed from their lattice sites. The figure shows the transition between amorphous carbon and diamond, with the interfaces highlighted with dashed lines.