Solvent Extraction of U(VI) by Calix[6]arenes

Direct Detection of Uranyl in Urine by Dissociation from Aptamer-Modified Nanosensor Arrays

An ever-growing demand for uranium in various industries raises concern for human health of both occupationally exposed personnel and the general population. Toxicological effects related to uranium (natural, enriched, or depleted uranium) intake involve renal, pulmonary, neurological, skeletal, and hepatic damage. Absorbed uranium is filtered by the kidneys and excreted in the urine, thus making uranium detection in urine a primary indication for exposure and body burden assessment. Therefore, the detection of uranium contamination in bio-samples (urine, blood, saliva, etc.,) is of crucial importance in the field of occupational exposure and human health-related applications, as well as in nuclear forensics. However, the direct determination of uranium in bio-samples is challenging because of "ultra-low" concentrations of uranium, inherent matrix complexity, and sample diversity, which pose a great analytical challenge to existing detection methods. Here, we report on the direct, real-time, sensitive, and selective detection of uranyl ions in unprocessed and undiluted urine samples using a uranyl-binding aptamer-modified silicon nanowire-based field-effect transistor (SiNW-FET) biosensor, with a detection limit in the picomolar concentration range. The aptamer-modified SiNW-FET presented in this work enables the simple and sensitive detection of uranyl in urine samples. The experimental approach has a straight-forward implementation to other metals and toxic elements, given the availability of target-specific aptamers. Combining the high surface-to-volume ratio of SiNWs, the high affinity and selectivity of the uranyl-binding aptamer, and the distinctive sensing methodology gives rise to a practical platform, offering simple and straightforward sensing of uranyl levels in urine, suitable for field deployment and point-of-care applications.

Impact of the uranium (VI) speciation in mineralised urines on its extraction by calix[6]arene bearing hydroxamic groups used in chromatography columns

Actinides determination in urine samples is part of the analyses performed to monitor internal contamination in case of an accident or a terrorist attack involving nuclear matter. Mineralisation is the first step of any of these analyses. It aims at reducing the sample volume and at destroying all organic compounds present. The mineralisation protocol is usually based on a wet ashing step, followed by actinides co-precipitation and a furnace ashing step, before redissolution and the quantification of the actinides by the appropriate techniques. Amongst the existing methods to perform the actinides co-precipitation, alkali-earth (typically calcium) precipitation is widely used. In the present work, the extraction of uranium(VI), plutonium(IV) and americium(III) from the redissolution solutions (called "mineralised urines") on calix[6]arene columns bearing hydroxamic groups was investigated as such an extraction is a necessary step before their determination by ICP-MS or alpha spectrometry. Difficulties were encountered in the transfer of uranium(VI) from raw to mineralised urines, with yield of transfer ranging between 0% and 85%, compared to about 90% for Pu and Am, depending on the starting raw urines. To understand the origin of such a difficulty, the speciation of uranium (VI) in mineralised urines was investigated by computer simulation using the MEDUSA software and the associated HYDRA database, compiled with recently published data. These calculations showed that the presence of phosphates in the "mineralised urines" leads to the formation of strong uranyl-phosphate complexes (such as UO2HPO4) which compete with the uranium (VI) extraction by the calix[6]arene bearing hydroxamic groups. The extraction constant of uranium (VI) by calix[6]arene bearing hydroxamic groups was determined in a 0.04 mol L(-1) sodium nitrate solution (logK=4.86±0.03) and implemented in an extraction model taking into account the speciation in the aqueous phase. This model allowed to simulate satisfactorily the experimental uranium extraction data and to support the preliminary conclusions about the role of the phosphates present in mineralised urines. These calculations also showed that the phosphate/calcium ratio is a key parameter as far as the efficiency of the uranium (VI) extraction by the calix[6]arene columns is concerned. It predicted that the addition of CaCl2 in mineralised urines would release uranium (VI) from phosphates by forming calcium (II)-phosphate complexes and thus facilitate the uranium (VI) extraction on calix[6]arene columns. These predictions were confirmed experimentally as the addition of 0.1 mol L(-1) CaCl2 to a mineralised urine containing naturally a high concentration of phosphate (typically 0.04 mol L(-1)) significantly increased the percentage of uranium (VI) extraction on the calix[6]arene columns.

A 4-tert-butylcalix[4]arene tetrahydroxamate podand based on the 1-oxypiperidine-2-one (1,2-PIPO−) chelate. Self-assembly into a supramolecular ionophore driven by coordination of tetravalent zirconium or hafnium(iv)

K⁺ is encapsulated by 2 : 2 complexes of tetravalent zirconium or hafnium with the calix[4]arene podand 1H₄ carrying four cyclic hydroxamate binding units.

Calixarene cleansing formulation for uranium skin contamination

An oil-in-water cleansing emulsion containing calixarene molecule, an actinide specific chelating agent, was formulated in order to improve the decontamination of uranium from the skin. Commonly commercialized cosmetic ingredients such as surfactants, mineral oil, or viscosifying agents were used in preparing the calixarene emulsion. The formulation was characterized in terms of size and apparent viscosity measurements and then was tested for its ability to limit uranyl ion permeation through excoriated pig-ear skin explants in 24-h penetration studies. Calixarene emulsion effectiveness was compared with two other reference treatments consisting of DTPA and EHBP solutions. Application of calixarene emulsion induced the highest decontamination effect with an 87% decrease in uranium diffusion flux. By contrast, EHBP and DTPA solutions only allowed a 50% and 55% reduction of uranium permeation, respectively, and had the same effect as a simple dilution of the contamination by pure water. Uranium diffusion decrease was attributed to uranyl ion-specific chelation by calixarene within the formulation, since no significant effect was obtained after application of the same emulsion without calixarene. Thus, calixarene cleansing emulsion could be considered as a promising treatment in case of accidental contamination of the skin by highly diffusible uranium compounds.

Texturing formulations for uranium skin decontamination

CONTEXT

Since no specific treatment exists in case of cutaneous contamination by radionuclides such as uranium, a nanoemulsion comprising calixarene molecules, known for their good chelation properties, was previously designed. However, this fluid topical form may be not suitable for optimal application on the skin or wounds.

OBJECTIVE

To develop a texturing pharmaceutical form for the treatment of wounded skins contaminated by uranium.

MATERIALS AND METHODS

The formulations consisted in oil-in-water (O/W) nanoemulsions, loaded with calixarene molecules. The external phase of the initial liquid nanoemulsion was modified with a combination of thermosensitive gelifying polymers: Poloxamer and HydroxyPropylMethylcellulose (HPMC) or methylcellulose (MC). These new formulations were characterized then tested by ex vivo experiments on Franz cells to prevent uranyl ions diffusion through excoriated pig ear skin explants.

RESULTS

Despite strong changes in rheological properties, the physico-chemical characteristics of the new nanoemulsions, such as the size and the zeta potential as well as macroscopic aspect were preserved. In addition, on wounded skin, diffusion of uranyl ions, measured by ICP-MS, was limited to less than 5% for both HPMC and MC nanoemulsions.

CONCLUSIONS

These results demonstrated that a hybrid formulation of nanoemulsion in hydrogel is efficient to treat uranium skin contamination.

Application of Calixarenes as Macrocyclic Ligands for Uranium(VI): A Review

Calixarenes represent a well-known family of macrocyclic molecules with broad range of potential applications in chemical, analytical, and engineering materials fields. This paper covers the use of calixarenes as complexing agents for uranium(VI). The high effectiveness of calix[6]arenes in comparison to other calixarenes in uranium(VI) separation process is also presented. Processes such as liquid-liquid extraction (LLE), liquid membrane (LM) separation, and ion exchange are considered as potential fields for application of calixarenes as useful agents for bindingUO22+for effective separation from aqueous solutions containing other metal components.

The extraction of thorium by calix[6]arene columns for urine analysis

Thorium is a natural alpha-emitting element occurring in various ores and has numerous industrial applications. Routine monitoring of potentially exposed workers is generally achieved through radiobioassay (urine and faeces). The procedures currently used for analysing actinides such as thorium in urine require lengthy chemical separation associated with long counting times by alpha-spectrometry due to low activity levels. Thus, their main drawback is that they are time-consuming, which limits the frequency and flexibility of individual monitoring. In this context, this study developed new radiochemical procedures based on the use of tertbutylcalix[6]arenes bearing three carboxylic acid groups or three hydroxamic acid groups. These previous works demonstrated that these macrocyclic molecules immobilised on an inert solid support are excellent extractants for uranium, plutonium and americium. In this study, the authors investigated the thorium extraction by calix[6]arene columns. Experiments were performed on synthetic solutions and on real urine samples. The influence of various parameters, such as the thorium solution pH and the column flow rate on thorium extraction, was studied. The results showed that both calix[6]arenes are efficient to extract thorium. Thorium extraction is quantitative from pH = 2 for synthetic solution and from pH = 3 for real urine samples. This study has demonstrated that the column flow rate is a crucial parameter since its value must not be too high to achieve the steady-state complexation equilibrium. Finally, these results will be compared with those obtained for other actinides (U, Pu and Am) and the conditions of actinides' separation will be discussed.

A new formulation containing calixarene molecules as an emergency treatment of uranium skin contamination

Cutaneous contamination represents the second highest contamination pathway in the nuclear industry. Despite that the entry of actinides such as uranium into the body through intact or wounded skin can induce a high internal exposure, no specific emergency treatment for cutaneous contamination exists. In the present work, an innovative formulation dedicated to uranium skin decontamination was developed. The galenic form consists in an oil-in-water nanoemulsion, which contains a tricarboxylic calixarene known for its high uranium affinity and selectivity. The physicochemical characterization of this topical form revealed that calixarene molecules are located at the surface of the dispersed oil droplets of the nanoemulsion, being thus potentially available for uranium chelation. It was demonstrated in preliminary in vitro experiments by using an adapted ultrafiltration method that the calixarene nanoemulsion was able to extract and retain more than 80% of uranium from an aqueous uranyl nitrate contamination solution. First ex vivo experiments carried out in Franz diffusion cells on pig ear skin explants during 24 h showed that the immediate application of the calixarene nanoemulsion on a skin contaminated by a uranyl nitrate solution allowed a uranium transcutaneous diffusion decrease of about 98% through intact and excoriated skins. The calixarene nanoemulsion developed in this study thus seems to be an efficient emergency system for uranium skin decontamination.

Novel Dinuclear Uranyl Complexes with Asymmetric Schiff Base Ligands: Synthesis, Structural Characterization, Reactivity, and Extraction Studies

The reaction of uranyl nitrate with asymmetric [3O, N] Schiff base ligands in the presence of base yields dinuclear uranyl complexes, [UO2(HL1)]2.DMF (1), [UO2(HL2)]2.2DMF.H2O (2), and [UO2(HL3)]2.2DMF (3) with 3-(2-hydroxybenzylideneamino)propane-1,2-diol (H3L1), 4-((2,3-dihydroxypropylimino)methyl)benzene-1,3-diol (H3L2), and 3-(3,5-di-tert-butyl-2-hydroxybenzylideneamino)propane-1,2-diol (H3L3), respectively. All complexes exhibit a symmetric U2O2 core featuring a distorted pentagonal bipyramidal geometry around each uranyl center. The hydroxyl groups on the ligands are attached to the uranyl ion in chelating, bridging, and coordinate covalent bonds. Distortion in the backbone is more pronounced in 1, where the phenyl groups are on the same side of the planar U2O2 core. The phenyl groups are present on the opposite side of U2O2 core in 2 and 3 due to electronic and steric effects. A similar hydrogen-bonding pattern is observed in the solid-state structures of 1 and 3 with terminal hydroxyl groups and DMF molecules, resulting in discrete molecules. Free aryl hydroxyl groups and water molecules in 2 give rise to a two-dimensional network with water molecules in the channels of an extended corrugated sheet structure. Compound 1 in the presence of excess Ag(NO3) yields {[(UO2)(NO3)(C6H4OCOO)](NH(CH2CH3)3)}2 (4), where the geometry around the uranyl center is hexagonal bipyrimidal. Two-phase extraction studies of uranium from aqueous media employing H3L3 indicate 99% reduction of uranyl ion at higher pH.