Asbestos fiber length and its relation to disease risk

Geological and mineralogical characterization of fibrous tremolite from Iacolinei quarry (Basilicata, Italy)

Naturally Occurring Asbestos (NOA) has drawn the attention worldwide when investigation revealed an increased incidence of malignant mesothelioma in population living near NOA sites. In Basilicata region (South Italy), population living in the villages of Castelluccio Superiore and Inferiore, Lauria, Latronico, Episcopia, San Severino Lucano, and Francavilla in Sinni may be considered at high risk of asbestos exposure because these villages are either surrounded by or built on NOA-rich ophiolitic outcrops. In this work we investigated an asbestos tremolite sample coming from the ophiolitic rocks outcropping in the quarry of Iacolinei, widely used in the past to extract aggregates for various applications.  A detailed mineralogical characterization has been attained by using a multi-analytical approach (EMPA, SEM-EDS, TEM-EDS, Mössbauer, µ-Raman, X-ray powder diffraction, and thermal analysis). Morphological investigation highlighted that the sample is composed of long fibers (> 5 µm) with a significant fraction (ca. 55%) having width below 0.25 µm, considered the most biologically active fibers. Moreover, the crystal chemical characterization showed that Fe occurs at the octahedral sites of the tremolite structure. It should be noted that Fe plays a primary role in the toxicity of asbestos. Based on these results, the investigated asbestos tremolite may be considered a potent mesothelial carcinogen, requiring therefore special attention for public health protection purposes. Investigations using sentinel animals to assess the diffusion of the tremolite fibers into the environment from the serpentinite rocks and soils of Iacolinei quarry are in progress.

Percutaneous coronary intervention leads to microplastics entering the blood: Interventional devices are a major source

Microplastics (MPs) is an emerging pollutant potentially harmful to health. Medical practices using plastic devices, such as percutaneous coronary interventions (PCI), may result in MPs entering into the blood. The purpose of this study was to quantify the effect of PCI on microplastic levels in patients' blood. Laser direct infrared (LDIR) was used to detect MPs in the blood of 23 patients before and after PCI. MPs in the water in which devices used in PCI were washed were also examined. The concentration of MPs in the blood was significantly elevated (93.57 ± 35.95 vs. 4.96 ± 3.40 particles/10 mL of blood, P < 0.001) after PCI compared to before, and the increased MPs were polyamide (PA), polyethylene (PE), polyurethane (PU), and polyethylene terephthalate (PET), which was consistent with the types of MPs detected in the device washing water. The maximum diameter of MPs in blood before PCI was 50 µm, whereas after PCI it was 213 µm, and even 336 µm in device washing water. These findings indicated that PCI will cause MPs to enter the blood, and devices used during PCI were a major source, a range of medical practices that use plastic devices may be a new route for MPs to enter the human body.

A review of the mesotheliogenic potency of cleavage fragments found in talc

It has long been recognized that amphibole minerals, such as cleavage fragments of tremolite and anthophyllite, may exist in some talc deposits. We reviewed the current state of the science regarding the factors influencing mesotheliogenic potency of cleavage fragments, with emphasis on those that may co-occur in talc deposits, including dimensional and structural characteristics, animal toxicology, and the most well-studied cohort exposed to talc-associated cleavage fragments. Based on our review, multiple lines of scientific evidence demonstrate that inhaled cleavage fragments associated with talc do not pose a mesothelioma hazard.

ROS-dependent degeneration of human neurons induced by environmentally relevant levels of micro- and nanoplastics of diverse shapes and forms

Our study explores the pressing issue of micro- and nanoplastics (MNPs) inhalation and their subsequent penetration into the brain, highlighting a significant environmental health concern. We demonstrate that MNPs can indeed penetrate murine brain, warranting further investigation into their neurotoxic effects in humans. We then proceed to test the impact of MNPs at environmentally relevant concentrations, with focusing on variations in size and shape. Our findings reveal that these MNPs induce oxidative stress, cytotoxicity, and neurodegeneration in human neurons, with cortical neurons being more susceptible than nociceptors. Furthermore, we examine the role of biofilms on MNPs, demonstrating that MNPs can serve as a vehicle for pathogenic biofilms that significantly exacerbate these neurotoxic effects. This sequence of investigations reveals that minimal MNPs accumulation can cause oxidative stress and neurodegeneration in human neurons, significantly risking brain health and highlights the need to understand the neurological consequences of inhaling MNPs. Overall, our developed in vitro testing battery has significance in elucidating the effects of environmental factors and their associated pathological mechanisms in human neurons.

Nano- and microplastic PBK modeling in the context of human exposure and risk assessment

Insufficient data on nano- and microplastics (NMP) hinder robust evaluation of their potential health risks. Methodological disparities and the absence of established toxicity thresholds impede the comparability and practical application of research findings. The diverse attributes of NMP, such as variations in sizes, shapes, and compositions, complicate human health risk assessment. Although probability density functions (PDFs) show promise in capturing this diversity, their integration into risk assessment frameworks is limited. Physiologically based kinetic (PBK) models offer a potential solution to bridge the gap between external exposure and internal dosimetry for risk evaluation. However, the heterogeneity of NMP poses challenges for accurate biodistribution modeling. A literature review, encompassing both experimental and modeling studies, was conducted to examine biodistribution studies of monodisperse micro- and nanoparticles. The literature search in PubMed and Scopus databases yielded 39 studies that met the inclusion criteria. Evaluation criteria were adapted from previous Quality Assurance and Quality Control (QA-QC) studies, best practice guidelines from WHO (2010), OECD guidance (2021), and additional criteria specific to NMP risk assessment. Subsequently, a conceptual framework for a comprehensive NMP-PBK model was developed, addressing the multidimensionality of NMP particles. Parameters for an NMP-PBK model are presented. QA-QC evaluations revealed that most experimental studies scored relatively well (>0) in particle characterizations and environmental settings but fell short in criteria application for biodistribution modeling. The evaluation of modeling studies revealed that information regarding the model type and allometric scaling requires improvement. Three potential applications of PDFs in PBK modeling of NMP are identified: capturing the multidimensionality of the NMP continuum, quantifying the probabilistic definition of external exposure, and calculating the bio-accessibility fraction of NMP in the human body. A framework for an NMP-PBK model is proposed, integrating PDFs to enhance the assessment of NMP's impact on human health.

Mechanisms of action of mineral fibres in a placental syncytiotrophoblast model: An in vitro toxicology study

Asbestos has been widely used due to its unique characteristics. It is known that exposure to asbestos causes serious damage to health but one species, chrysolite, is still used because it is considered less toxic and not biopersistent in some countries. The aim of our study was to investigate if cellular process underlying the proliferation, differentiation and cell death of placental tissues could be modify in presence of asbestos fibres (50 μg/ml final concentration), long chrysolite fibres (CHR-L) and short chrysolite fibres (CHR-S), using BeWo cell line, an in vitro model that mimics the syncytiotrophoblast (STB), the outer layer of placental villi. Our data demonstrated that none of the fibres analysed alter syncytiotrophoblast formation but all of them induce ROS formation and reduced cell proliferation. Moreover, we showed that only CHR-L fibre induced was able to induce irreversible DNA alterations that carried cells to apoptosis. In fact, BeWo cells exposed to CHR-L fibre showed a significant increase in cleaved CASP3 protein, a marker of apoptosis. These data suggest that CHR-L may induce death of the placental villi leading to impaired placental development. The impairment of placental development is the basis of many gestational pathologies such as preeclampsia and intrauterine growth retardation. Since these pathologies are very dangerous for foetal and maternal life, we suggest to the gynaecologists to carefully evaluate the area of maternal residence, the working environment, the food used, and the materials used daily to avoid contact with these fibres as much as possible.

Micro(nano)plastics in the Human Body: Sources, Occurrences, Fates, and Health Risks

The increasing global attention on micro(nano)plastics (MNPs) is a result of their ubiquity in the water, air, soil, and biosphere, exposing humans to MNPs on a daily basis and threatening human health. However, crucial data on MNPs in the human body, including the sources, occurrences, behaviors, and health risks, are limited, which greatly impedes any systematic assessment of their impact on the human body. To further understand the effects of MNPs on the human body, we must identify existing knowledge gaps that need to be immediately addressed and provide potential solutions to these issues. Herein, we examined the current literature on the sources, occurrences, and behaviors of MNPs in the human body as well as their potential health risks. Furthermore, we identified key knowledge gaps that must be resolved to comprehensively assess the effects of MNPs on human health. Additionally, we addressed that the complexity of MNPs and the lack of efficient analytical methods are the main barriers impeding current investigations on MNPs in the human body, necessitating the development of a standard and unified analytical method. Finally, we highlighted the need for interdisciplinary studies from environmental, biological, medical, chemical, computer, and material scientists to fill these knowledge gaps and drive further research. Considering the inevitability and daily occurrence of human exposure to MNPs, more studies are urgently required to enhance our understanding of their potential negative effects on human health.

Pleural Mesothelioma: Treatable Traits of a Heterogeneous Disease

Pleural mesothelioma is an aggressive disease with diffuse nature, low median survival, and prolonged latency presenting difficulty in prognosis, diagnosis, and treatment. Here, we review all these aspects to underline the progress being made in its investigation and to emphasize how much work remains to be carried out to improve prognosis and treatment.

Association between Asbestos Exposure and the Incidence of Kidney Cancer: a Weight-of-Evidence Evaluation and Meta-analysis

PURPOSE OF REVIEW

Occupational asbestos exposure has been extensively linked to various cancers, with ongoing debates regarding its association with kidney cancer. This study aims to investigate the correlation between occupational asbestos exposure and kidney cancer incidence. Additionally, potential influencing factors are analyzed to enhance the comprehension of the relationship between asbestos exposure and kidney cancer.

RECENT FINDING

While asbestos has established strong associations with malignant mesothelioma and lung cancer, its connection to other malignancies such as gastric, colorectal, and kidney cancers remains under scrutiny. The current study presents mixed opinions on the relationship between asbestos exposure and kidney cancer. Our analysis revealed a potential association between asbestos exposure and the incidence of kidney cancer. Notably, among different types of asbestos, exposure to amphibole appeared to be particularly linked to a higher incident risk of kidney cancer.

Polytetrafluorethylene microplastic particles mediated oxidative stress, inflammation, and intracellular signaling pathway alteration in human derived cell lines

Microplastics (MPs) are now widely distributed across the aerial, terrestrial, and aquatic environments. Thus, exposure to MPs via the oral, inhalation, or dermal routes is inevitable. Polytetrafluoroethylene (PTFE)-MPs is mainly used for manufacturing nonstick cookware, semiconductors, and medical devices; however, their toxicity has been rarely studied. In the present study, six different human cell lines, which are representative of tissues and cells that directly or indirectly come into contact with MPs, were exposed to two different sizes of irregular shape PTFE-MPs (with an average diameter of 6.0 or 31.7 μm). PTFE-MPs-mediated cytotoxicity, oxidative stress, and changes in proinflammatory cytokine production were then evaluated. We found that the PTFE-MPs did not induce cytotoxicity under any of the experimental conditions. However, PTFE-MPs (especially average diameter of 6.0 μm) induced nitric oxide and reactive oxygen species production in all the cell lines tested. Moreover, both sizes of PTFE-MPs increased the secretion of tumor necrosis factor alpha and interleukin-6 from the U937 macrophage cell line and the A549 lung epithelial cell line, respectively. In addition, PTFE-MPs activated the MAPK signaling pathways, especially the ERK pathway, in A549 and U937 cells, and in the THP-1 dendritic cell line. We also found that the expression of the NLRP3 inflammasome was reduced in the U937 and THP-1 cell lines following treatment with the PTFE-MPs sized 31.7 μm average diameter. Furthermore, expression of the apoptosis regulator, BCL2, was markedly increased in the A549 and U937 cell lines. Thus, although PTFE-MPs exert different effects on different cell types, our findings suggest that PTFE-MPs-associated toxicity may be specifically linked to the activation of the ERK pathway, which ultimately induces oxidative stress and inflammation.

Distinct Pro-Inflammatory Mechanisms Elicited by Short and Long Amosite Asbestos Fibers in Macrophages

While exposure to long amphibolic asbestos fibers (L > 10 µm) results in the development of severe diseases including inflammation, fibrosis, and mesothelioma, the pathogenic activity associated with short fibers (L < 5 µm) is less clear. By exposing murine macrophages to short (SFA) or long (LFA) fibers of amosite asbestos different in size and surface chemistry, we observed that SFA internalization resulted in pyroptotic-related immunogenic cell death (ICD) characterized by the release of the pro-inflammatory damage signal (DAMP) IL-1α after inflammasome activation and gasdermin D (GSDMD)-pore formation. In contrast, macrophage responses to non-internalizable LFA were associated with tumor necrosis factor alpha (TNF-α) release, caspase-3 and -7 activation, and apoptosis. SFA effects exclusively resulted from Toll-like receptor 4 (TLR4), a pattern-recognition receptor (PRR) recognized for its ability to sense particles, while the response to LFA was elicited by a multifactorial ignition system involving the macrophage receptor with collagenous structure (SR-A6 or MARCO), reactive oxygen species (ROS) cascade, and TLR4. Our findings indicate that asbestos fiber size and surface features play major roles in modulating ICD and inflammatory pathways. They also suggest that SFA are biologically reactive in vitro and, therefore, their inflammatory and toxic effects in vivo should not be underestimated.

Carbon nanotube pathogenicity conforms to a unified theory for mesothelioma causation by elongate materials and fibers

The purpose of this review is to elucidate how dimensional and durability characteristics of high aspect ratio nanomaterials (HARN), including carbon nanotubes (CNT) and metal nanowires (MeNW), contribute to understanding the fiber pathogenicity paradigm (FPP), including by explaining the structure-activity relationships (SAR) of a diverse range of natural and synthetic elongate materials that may or may not contribute to mesothelioma development in the lung. While the FPP was originally developed to explain the critical importance of asbestos and synthetic vitreous fiber length, width, aspect ratio and biopersistence in mesothelioma development, there are a vast number of additional inhalable materials that need to be considered in terms of pathogenic features that may contribute to mesothelioma or lack thereof. Not only does the ability to exert more exact control over the length and biopersistence of HARNs confirm the tenets of the FPP, but could be studied by implementating more appropriate toxicological tools for SAR analysis. This includes experimentation with carefully assembled libraries of CNTs and MeNWs, helping to establish more precise dimensional features for interfering in lymphatic drainage from the parietal pleura, triggering of lysosomal damage, frustrated phagocytosis and generation of chronic inflammation. The evidence includes data that long and rigid, but not short and flexible multi-wall CNTs are capable of generating mesotheliomas in rodents based on an adverse outcome pathway requiring access to pleural cavity, obstruction of pleural stomata, chronic inflammation and transformation of mesothelial cells. In addition to durability and dimensional characteristics, bending stiffness of CNTs is a critical factor in determining the shape and rigidity of pathogenic MWCNTs. While no evidence has been obtained in humans that CNT exposure leads to a mesothelioma outcome, it is important to monitor exposure levels and health effect impacts in workers to prevent adverse health outcomes in humans.

Cytotoxicity of fibrous antigorite from New Caledonia

Exposure to asbestos and asbestos-like minerals has been related to the development of severe lung diseases, including cancer and malignant mesothelioma (MM). A high incidence of non-occupational MM was observed in New Caledonia (France) in people living in proximity of serpentinite outcrops, containing chrysotile and fibrous antigorite. Antigorite is a magnesium silicate, which shares with chrysotile asbestos the chemical formula. To achieve information on antigorite toxicity, we investigated the physico-minero-chemical features relevant for toxicity and cellular effects elicited on murine macrophages (MH-S) and alveolar epithelial cells (A549) of three fibrous antigorites (f-Atg) collected in a Caledonian nickel lateritic ore and subjected to supergene alteration. Field Atg were milled to obtain samples suitable for toxicological studies with a similar particle size distribution. UICC chrysotile (Ctl) and a non-fibrous antigorite (nf-Atg) were used as reference minerals. A high variability in toxicity was observed depending on shape, chemical alteration, and surface reactivity. The antigorites shared with Ctl a similar surface area (16.3, 12.1, 20.3, 13.4, and 15.6 m²/g for f-Atg1, 2, 3, nf-Atg, and Ctl). f-Atg showed different level of pedogenetic weathering (Ni depletion f-Atg1 ≪ f-Atg2 and 3) and contained about 50% of elongated mineral particles, some of which exhibited high aspect ratios (AR > 10 μm, 20%, 26%, 31% for f-Atg1, 2, and 3, respectively). The minerals differed in bio-accessible iron at pH 4.5 (f-Atg1 ≪ f-Atg3, < f-Atg2, nf-Atg < Ctl), and surface reactivity (ROS release in solution, f-Atg1 ≪ f-Atg2, 3, nf-Atg, and Ctl). f-Atg2 and f-Atg3 induced oxidative stress and pro-inflammatory responses, while the less altered, poorly reactive sample (f-Atg1) induced negligible effects, as well nf-Atg. The slow dissolution kinetics observed in simulated body fluids may signal a high biopersistence. Overall, our work revealed a significative cellular toxicity of f-Atg that correlates with fibrous habit and surface reactivity.

Dimensions of elongate mineral particles and cancer: A review

CONTEXT

Based on a decade-long exploration, dimensions of elongate mineral particles are implicated as a pivotal component of their carcinogenic potency. This paper summarizes current understanding of the discovered relationships and their importance to the protection of public health.

OBJECTIVES

To demonstrate the relationships between cancer risk and dimensions (length, width, and other derivative characteristics) of mineral fibers by comparing the results and conclusions of previously published studies with newly published information.

METHODS

A database including 59 datasets comprising 341,949 records were utilized to characterize dimensions of elongate particles. The descriptive statistics, correlation and regression analysis, combined with Monte Carlo simulation, were used to select dimensional characteristics most relevant for mesothelioma and lung cancer risk prediction.

RESULTS

The highest correlation between mesothelioma potency factor and weight fraction of size categories is achieved for fibers with lengths >5.6 μm and widths ≤0.26 μm (R = 0.94, P < 0.02); no statistically significant potency was found for lengths <5 μm. These results are consistent with early published estimations, though are derived from a different approach. For combinations of amphiboles and chrysotile (with a consideration of a correction factor between mineral classes), the potency factors correlated most highly with a fraction of fibers longer than 5 μm and thinner than 0.2 μm for mesothelioma, and longer than 5 μm and thinner than 0.3 μm for lung cancer. Because the proportion of long, thin particles in asbestiform vs. non-asbestiform dusts is higher, the cancer potencies of the former are predicted at a significantly higher level. The analysis of particle dimensionality in human lung burden demonstrates positive selection for thinner fibers (especially for amosite and crocidolite) and prevailing fraction of asbestiform habit.

CONCLUSION

Dimensions of mineral fibers can be confirmed as one of the main drivers of their carcinogenicity. The width of fibers emerges as a primary potency predictor, and fibers of all widths with lengths shorter than 5 μm seem to be non-impactful for cancer risk. The mineral dust with a fibrous component is primarily carcinogenic if it contains amphibole fibers longer than 5 μm and thinner than 0.25 μm.

Exposure to polystyrene microplastics triggers lung injury via targeting toll-like receptor 2 and activation of the NF-κB signal in mice

Microplastics are ubiquitous pollutants with a wide range of plastic applications. More recently, microplastics are in the air and can be inhaled into the lungs, causing respiratory diseases. Knowledge of the underlying mechanisms by which microplastics may induce respiratory disease is still limited. This study used intranasal instillation to develop a model of lung injury. The histopathology result showed that the mouse lung had severe inflammatory responses, apoptosis and collagen deposition with chronic exposure to different sizes (Small: 1-5 μm and Large: 10-20 μm) of polystyrene microplastics (PS-MPS), and the damage of smaller sizes was obvious. The expression levels of the Toll-like receptors (TLRs) family, evolutionarily conserved pattern recognition receptors, were detected, and the levels of TLR2 mRNA was significantly increased. In transfection experiments, PS-MPS increased the inflammatory response in HEK293 cells with TLR2 expression. Furthermore, exposure to small polystyrene microplastics promoted oxidative stress and apoptosis, and accelerated the process of fibrosis. Interestingly, inhibition of the NF-κB signal relieves inflammation and oxidative stress, reduces apoptosis, and thus controls the fibrosis process. These results suggested that PS-MPS targeted binding to TLR2 and further exacerbated fibrosis by facilitating inflammation, oxidative stress, and apoptosis with the activation of NF-κB signal.

Ferroptosis in life: To be or not to be

Ferroptosis is a novel type of programmed cell death, characterized by a dysregulated iron metabolism and accumulation of lipid peroxides. It features the alteration of mitochondria and aberrant accumulation of excessive iron as well as loss of the cysteine-glutathione-GPX4 axis. Eventually, the accumulated lipid peroxides result in lethal damage to the cells. Ferroptosis is induced by the overloading of iron and the accumulation of ROS and can be inhibited by the activation of the GPX4 pathway, FS1-CoQ10 pathway, GCH1-BH4 pathway, and the DHODH pathway, it is also regulated by the oncogenes and tumor suppressors. Ferroptosis involves various physiological and pathological processes, and increasing evidence indicates that ferroptosis play a critical role in cancers and other diseases. It inhibits the proliferation of malignant cells in various types of cancers and inducing ferroptosis may become a new method of cancer treatment. Many inhibitors targeting the key factors of ferroptosis such as SLC7A11, GPX4, and iron overload have been developed. The application of ferroptosis is mainly divided into two directions, i.e. to avoid ferroptosis in healthy cells and selectively induce ferroptosis in cancers. In this review, we provide a critical analysis of the concept, and regulation pathways of ferroptosis and explored its roles in various diseases, we also summarized the compounds targeting ferroptosis, aiming to promote the speed of clinical use of ferroptosis induction in cancer treatment.

Polypropylene nanoplastic exposure leads to lung inflammation through p38-mediated NF-κB pathway due to mitochondrial damage

BACKGROUND

Polypropylene (PP) is used in various products such as disposable containers, spoons, and automobile parts. The disposable masks used for COVID-19 prevention mainly comprise PP, and the disposal of such masks is concerning because of the potential environmental pollution. Recent reports have suggested that weathered PP microparticles can be inhaled, however, the inhalation toxicology of PP microparticles is poorly understood.

RESULTS

Inflammatory cell numbers, reactive oxygen species (ROS) production, and the levels of inflammatory cytokines and chemokines in PP-instilled mice (2.5 or 5 mg/kg) increased significantly compared to with those in the control. Histopathological analysis of the lung tissue of PP-stimulated mice revealed lung injuries, including the infiltration of inflammatory cells into the perivascular/parenchymal space, alveolar epithelial hyperplasia, and foamy macrophage aggregates. The in vitro study indicated that PP stimulation causes mitochondrial dysfunction including mitochondrial depolarization and decreased adenosine triphosphate (ATP) levels. PP stimulation led to cytotoxicity, ROS production, increase of inflammatory cytokines, and cell deaths in A549 cells. The results showed that PP stimulation increased the p-p38 and p-NF-κB protein levels both in vivo and in vitro, while p-ERK and p-JNK remained unchanged. Interestingly, the cytotoxicity that was induced by PP exposure was regulated by p38 and ROS inhibition in A549 cells.

CONCLUSIONS

These results suggest that PP stimulation may contribute to inflammation pathogenesis via the p38 phosphorylation-mediated NF-κB pathway as a result of mitochondrial damage.

Is asbestos still a problem in the world? A current review

Asbestos has been used by automobile, construction, manufacturing, power, and chemical industries for many years due to its particular properties, i.e. high tensile strength, non-flammable, thermal and electrical resistance and stability, and chemical resistance. However, such a mineral causes harmful effects to human health, including different types of cancer (e.g., mesothelioma). As a result, the use of asbestos has been banned since the 1980s in many countries. Nonetheless, asbestos is still part of the daily life of the population as asbestos-containing materials (ACMs) are still present in many buildings constructed and renovated before the 1990s. This work aims to present a current literature review about asbestos. The literature review was composed mainly of research articles published in international journals from the medical and engineering disciplines to provide an overview of asbestos use effects reported in interdisciplinary areas. The literature review comprised asbestos characteristics and its relationship to the risks of human exposure, countries where asbestos use is permitted or banned, reducing asbestos in the built environment, and environmental impact due to use and disposal of asbestos. The main findings were that ACMs are still responsible for severe human diseases, particularly in areas where there is a lack of coordinated asbestos management plans, reduced awareness about asbestos health risks, or even a delay in the implementation of asbestos-ban. Such issues may be more prevailing in developing countries. The current research in many countries contemplates several methodologies and techniques to process ACMs into inert and recyclable materials. The identification and coordinated management of ACM hazardous waste is a significant challenge to be faced by countries, and its inadequate disposal causes severe risk of exposure to asbestos fibres. Based on this work, it was concluded that banning asbestos is indicated in all countries in the world.

Absorption, distribution, metabolism, excretion and toxicity of microplastics in the human body and health implications

Microplastics (MPs; <5 mm) in the biosphere draws public concern about their potential health impacts. Humans are potentially exposed to MPs via ingestion, inhalation, and dermal contact. Ingestion and inhalation are the two major exposure pathways. An adult may consume approximately 5.1 × 10³ items from table salts and up to 4.1 × 10⁴ items via drinking water annually. Meanwhile, MP inhalation intake ranges from 0.9 × 10⁴ to 7.9 × 10⁴ items per year. The intake of MPs would be further distributed in different tissues and organs of humans depending on their sizes. The excretion has been discussed with the possible clearance ways (e.g., urine and feces). The review summarized the absorption, distribution, metabolic toxicity and excretion of MPs together with the attached chemicals. Moreover, the potential implications on humans are also discussed from in vitro and in vivo studies, and connecting the relationship between the physicochemical properties and the potential risks. This review will contribute to a better understanding of MPs as culprits and/or vectors linking to potential human health hazards, which will help outline the promising areas for further revealing the possible toxicity pathways.

The health effects of short fiber chrysotile and amphibole asbestos

The potential toxic effects of short chrysotile and amphibole asbestos fibers with lengths <5 to ∼10 µm have been debated over the years. This stems from the large database of epidemiology, toxicology, and in-vitro studies, each of which often provides different information in understanding and differentiating the effects of short fibers. The epidemiology studies in which the cancer potency estimates were based upon relatively high exposure concentrations provide a conservative assessment that shorter fibers would have little if any effect, especially under controlled exposure or environmental conditions that may occur today. The QSAR models have shown that fiber aspect ratio and Mg content are excellent predictors of cancer potency and that short fibers/particles of amphibole would have no effect. The studies of motor vehicle mechanics and in particular workers who serviced chrysotile containing brakes with the majority of the fibers being short provides evidence that motor vehicle mechanics, including workers who were engaged in brake repair, are not at an increased risk of mesothelioma. Several inhalation toxicology studies clearly differentiated that short chrysotile and amphibole asbestos fibers did not produce a significant carcinogenic effect in the lung or pleural cavity. Because of dosing and lack of sensitivity to biosolubility, in vitro studies can be difficult to interpret; however, a number have differentiated short chrysotile and amphibole asbestos fibers from long fibers. Integral to understanding the importance of fiber length in determining possible health effects is an understanding of the biological and physiological function of the respiratory system. Short asbestos fibers, like innocuous dust, can be cleared through the tracheobronchial ciliated mucous transport, phagocytized by macrophages and cleared via the bronchial tree, and can also be removed through the lymphatic system. While the first two methods can remove them from the lung, with lymphatic transport through one-way valves, fibers are removed from the active area of the lung where the fiber-related disease has been shown to develop and can accumulate in lymphatic sumps and lymph nodes. While short asbestos fibers are present in most occupational or environmental exposures, the large body of studies strongly supports that they do not contribute to the health effects of asbestos exposure.

The Epithelial-to-Mesenchymal Transition (EMT) in the Development and Metastasis of Malignant Pleural Mesothelioma

Malignant pleural mesothelioma (MPM) is an aggressive tumor mainly associated with asbestos exposure and is characterized by a very difficult pharmacological approach. One of the molecular mechanisms associated with cancer onset and invasiveness is the epithelial-to-mesenchymal transition (EMT), an event induced by different types of inducers, such as transforming growth factor β (TGFβ), the main inducer of EMT, and oxidative stress. MPM development and metastasis have been correlated to EMT; On one hand, EMT mediates the effects exerted by asbestos fibers in the mesothelium, particularly via increased oxidative stress and TGFβ levels evoked by asbestos exposure, thus promoting a malignant phenotype, and on the other hand, MPM acquires invasiveness via the EMT event, as shown by an upregulation of mesenchymal markers or, although indirectly, some miRNAs or non-coding RNAs, all demonstrated to be involved in cancer onset and metastasis. This review aims to better describe how EMT is involved in driving the development and invasiveness of MPM, in an attempt to open new scenarios that are useful in the identification of predictive markers and to improve the pharmacological approach against this aggressive cancer.

A critical review of the 2020 EPA risk assessment for chrysotile and its many shortcomings

From 2018 to 2020, the United States Environmental Protection Agency (EPA) performed a risk evaluation of chrysotile asbestos to evaluate the hazards of asbestos-containing products (e.g. encapsulated products), including brakes and gaskets, allegedly currently sold in the United States. During the public review period, the EPA received more than 100 letters commenting on the proposed risk evaluation. The Science Advisory Committee on Chemicals (SACC), which peer reviewed the document, asked approximately 100 questions of the EPA that they expected to be addressed prior to publication of the final version of the risk assessment on 30 December 2020. After careful analysis, the authors of this manuscript found many significant scientific shortcomings in both the EPA's draft and final versions of the chrysotile risk evaluation. First, the EPA provided insufficient evidence regarding the current number of chrysotile-containing brakes and gaskets being sold in the United States, which influences the need for regulatory oversight. Second, the Agency did not give adequate consideration to the more than 200 air samples detailed in the published literature of auto mechanics who changed brakes in the 1970-1989 era. Third, the Agency did not consider more than 15 epidemiology studies indicating that exposures to encapsulated chrysotile asbestos in brakes and gaskets, which were generally in commerce from approximately 1950-1985, did not increase the incidence of any asbestos-related disease. Fourth, the concern about chrysotile asbestos being a mesothelioma hazard was based on populations in two facilities where mixed exposure to chrysotile and commercial amphibole asbestos (amosite and crocidolite) occurred. All 8 cases of pleural cancer and mesothelioma in the examined populations arose in facilities where amphiboles were present. It was therefore inappropriate to rely on these cohorts to predict the health risks of exposure to short fiber chrysotile, especially of those fibers filled with phenolic resins. Fifth, the suggested inhalation unit risk (IUR) for chrysotile asbestos was far too high since it was not markedly different than for amosite, despite the fact that the amphiboles are a far more potent carcinogen. Sixth, the approach to low dose modeling was not the most appropriate one in several respects, but, without question, it should have accounted for the background rate of mesothelioma in the general population. Just one month after this assessment was published, the National Academies of Science notified the EPA that the Agency's systematic review process was flawed. The result of the EPA's chrysotile asbestos risk evaluation is that society can expect dozens of years of scientifically unwarranted litigation. Due to an aging population and because some fraction of the population is naturally predisposed to mesothelioma given the presence of various genetic mutations in DNA repair mechanisms (e.g. BAP1 and others), the vast majority of mesotheliomas in the post-2035 era are expected to be spontaneous and unrelated in any way to exposure to asbestos. Due to the EPA's analysis, it is our belief that those who handled brakes and gaskets in the post-1985 era may now believe that those exposures were the cause of their mesothelioma, when a risk assessment based on the scientific weight of evidence would indicate otherwise.

Dimensional determinants for the carcinogenic potency of elongate amphibole particles

CONTEXT

Carcinogenic properties of particulates depend, among other factors, on dimensional characteristics that affect their ability to reach sensitive tissue, to be removed or retained, and to interact with the cells.

OBJECTIVE

To model mesothelioma and lung cancer potency of amphibole particles based on their dimensional characteristics and mineral habit (asbestiform vs. nonasbestiform) utilizing epidemiological data and detailed size information.

METHODS

The datasets from recently created depository of dimensional information of elongate mineral particles were used to correlate mesothelioma and lung cancer potency with the fraction of particles in a specific size range and the ratio of length and width in different powers. In addition, the cancer potency factors were estimated and compared for 30 asbestiform, 15 nonasbestiform, and 10 mixed datasets.

RESULTS

For particles longer than 5 µm, the highest correlation with mesothelioma potency was achieved for width <0.22 µm, and with lung cancer <0.28 µm. The statistical power of the correlation was observed to lose significance at a maximum width of 0.6-0.7 µm. Mesothelioma potency correlated with length in the power of 1.9 divided by width in the power of 2.97, lung cancer potency with length in the power of 0.4 divided by width in the power of 1.17. The predicted cancer potencies of asbestiform, nonasbestiform, and mixed categories were significantly different.

CONCLUSION

While additional studies in this direction are warranted, this paper should serve as an additional confirmation for the role of fiber dimensions in the carcinogenicity of amphibole elongate mineral particles (EMPs).

Integration of Evidence on Community Cancer Risks from Elongate Mineral Particles in Silver Bay, Minnesota

The potential for cancer-related risks to community members from ambient exposure to elongate mineral particles (EMPs) in taconite processing has not been formally evaluated. We evaluated 926 ambient air samples including 12,928 EMPs (particle structures with length-to-width ratio ≥3:1) collected over 26 years near a taconite processing facility in Silver Bay, Minnesota. Eighty-two percent of EMPs were ≤3 μm in length and 97% of EMPs had an average aspect ratio <20:1. A total of 935 (7.3%) EMPs had length >5 μm and AR ≥3:1. Average ambient concentration of NIOSH countable amphibole EMPs over all years was 0.000387 EMPs per cubic centimeter (EMP/cm³ ). Of 12,765 nonchrysotile EMPs, the number of amphiboles with length and width dimensions that correlate best with asbestos-related carcinogenicity ranged from four (0.03%) to 13 (0.1%) and the associated ambient amphibole air concentrations ranged from 0.000003 to 0.000007 EMP/cm³ . After 65 years of taconite processing in Silver Bay, evidence of an increased risk of mesothelioma and lung cancer in community members who did not work in the taconite industry is lacking. The absence of an increased risk of asbestos-related cancer in the Silver Bay community is coherent with supporting evidence from epidemiological and toxicological studies, as well as ambient exposure data and lake sediment data collected in Minnesota Iron Range communities. Collectively, the data provide consistent evidence that nonasbestiform amphibole minerals lack the carcinogenic potential exhibited by amphibole asbestos.

An emerging class of air pollutants: Potential effects of microplastics to respiratory human health?

It is increasingly recognized that the ubiquity of convenient single-use plastic has resulted in a global plastic pollution challenge, with substantial environmental and health consequences. Physical, chemical, and biological processes result in plastic weathering, with eventual formation of debris in the micro to nano size range. There is an increasing awareness that plastic fragments are dispersed in the air and can be inhaled by humans, which may cause adverse effects on the respiratory system and on other systems. Urban environments are often characterized by high concentrations of fine airborne dust from various sources. To date, however, there is limited information on the distribution, shape, and size of microplastics in the air in urban and other environments. In this article, we review and discuss our current understanding of the exposure characteristics of airborne plastic debris in urbanized areas, focusing on concentration, size, morphology, presence of additives and distributions of different polymers. The natural and extend data are compiled and compared to laboratory-based analyses to further our understanding of the potential adverse effects of inhaled plastic particles on human health.

Perspective: The Lung, Particles, Fibers, Nanomaterials, and Autoimmunity

Studies have shown that a wide range of factors including drugs, chemicals, microbes, and other environmental agents can induce pre-clinical autoimmunity. However, only a few have been confidently linked to autoimmune diseases. Among these are exposures to inhaled particulates that are known to be associated with autoimmune diseases such as lupus and rheumatoid arthritis. In this article, the potential of particle, fiber, and nanomaterial exposures to induce autoimmunity is discussed. It is hypothesized that inhalation of particulate material known to be associated with human autoimmune diseases, such as cigarette smoke and crystalline silica, results in a complex interplay of a number of pathological processes, including, toxicity, oxidative stress, cell and tissue damage, chronic inflammation, post-translational modification of self-antigens, and the formation of lymphoid follicles that provide a milieu for the accumulation of autoreactive B and T cells necessary for the development and persistence of autoimmune responses, leading to disease. Although experimental studies show nanomaterials are capable of inducing several of the above features, there is no evidence that this matures to autoimmune disease. The procession of events hypothesized here provides a foundation from which to pursue experimental studies to determine the potential of other environmental exposures to induce autoimmunity and autoimmune disease.

In Silico Optimization of Fiber-Shaped Aerosols in Inhalation Therapy for Augmented Targeting and Deposition across the Respiratory Tract

Motivated by a desire to uncover new opportunities for designing the size and shape of fiber-shaped aerosols towards improved pulmonary drug delivery deposition outcomes, we explore the transport and deposition characteristics of fibers under physiologically inspired inhalation conditions in silico, mimicking a dry powder inhaler (DPI) maneuver in adult lung models. Here, using computational fluid dynamics (CFD) simulations, we resolve the transient translational and rotational motion of inhaled micron-sized ellipsoid particles under the influence of aerodynamic (i.e., drag, lift) and gravitational forces in a respiratory tract model spanning the first seven bifurcating generations (i.e., from the mouth to upper airways), coupled to a more distal airway model representing nine generations of the mid-bronchial tree. Aerosol deposition efficiencies are quantified as a function of the equivalent diameter (dp) and geometrical aspect ratio (AR), and these are compared to outcomes with traditional spherical particles of equivalent mass. Our results help elucidate how deposition patterns are intimately coupled to dp and AR, whereby high AR fibers in the narrow range of dp = 6-7 µm yield the highest deposition efficiency for targeting the upper- and mid-bronchi, whereas fibers in the range of dp= 4-6 µm are anticipated to cross through the conducting regions and reach the deeper lung regions. Our efforts underscore previously uncovered opportunities to design the shape and size of fiber-like aerosols towards targeted pulmonary drug delivery with increased deposition efficiencies, in particular by leveraging their large payloads for deep lung deposition.

How asbestos and other fibers cause mesothelioma

Mesothelioma has long been associated with the exposure to asbestos, which was largely used in manufacturing activities. Toxicology studies in vitro and in vivo demonstrated that asbestos fibers were carcinogenic, and epidemiology studies revealed that asbestos exposure was paralleled by the increase in the incidence of mesothelioma and related mortality rates. More recently, the role of chronic inflammation and the molecular mechanisms involved in carcinogenesis by mineral fibers were elucidated following the discovery of the roles of HMGB1 and inflammasome. A change of paradigm was the discovery of a prevalence of mesotheliomas attributable to inherited mutations of cancer susceptibility genes. The discovery of BAP1 as a predisposition gene for the development of familial mesothelioma and other cancers implemented genome studies in patients with mesothelioma and routine clinical surveys in individuals at risk to identify germline mutations associated with cancers included in the BAP1 syndrome. A further progress in the approach to asbestos-related malignancy was the adoption of combined genetics and environmental analyses according to the model of gene-environment (GxE) interactions. This review aims at updating on the most recently discovered mechanisms of tumorigenesis and the pivotal role of GxE interactions.

Empirical model of mesothelioma potency factors for different mineral fibers based on their chemical composition and dimensionality

Context: The potency of various mineral fiber types to produce mesothelioma was previously evaluated for numerous cohorts, but the differences in potencies for distinct fiber types have yet to be explained. Objective: To develop an empirical model that would reconstruct mesothelioma potency factors for various types of fiber based on their chemical composition and dimensionality. Methods: Typical chemical composition and dimensionality metrics (aspect ratios) were obtained and combined with mesothelioma potency factors estimated by Hodgson and Darnton method for Quebec chrysotile, South Africa amosite, South Africa and Australian crocidolite, Russian anthophyllite, Libby amphiboles, and Turkey erionite. The forward stepwise log-log regression method was utilized to determine the best combination of input parameters. Results: Mesothelioma potency factors (R_M) for selected cohorts were effectively reconstructed utilizing the median aspect ratio of fibers and equivalent fractions of SiO₂, total Fe oxides or total equivalent Fe³⁺ as Fe₂O₃, and MgO. Modeled potency factors increase as the aspect ratio, SiO₂, and total Fe oxide (or Fe₂O₃) content grow, and as the MgO content diminishes. Correlation coefficients up to 0.999, p < 0.01, were achieved. The models also yield reasonable estimates of mesothelioma potencies for other fiber types, including Bolivian crocidolite, Russian chrysotile, fluoro-edenite, and others. Conclusion: In spite of the empirical approach, the proposed models provide a starting point for targeted studies of mesothelioma mechanisms by elucidating significant contributing physicochemical factors. The models have an exploratory and preliminary character but can potentially be useful to introduce quantitative structure-activity relationship approaches for the toxicology of fibrous minerals.

Standardized methods for preparation and bi-variate length & diameter counting/sizing of aerosol and tissue digestion fiber samples

Most fiber length distributions fit a log-normal distribution with their being many more shorter fibers present as compared to the longer fibers. As the longer fibers have been suggested to be more important for possible pathogenesis giving equal weight to all fiber lengths when sizing fibers will under sample the longer fibers. The methods described here, are based upon the optimization of fiber counting/sizing rules over a number years of experience and have been developed to provide a stable estimate of the mean number of particles and fibers present in the size ranges: particles, fibers < 5 μm; 5-20 μm; and >20 μm. These methods were first applied using TEM, however, with the development of high resolution SEM, it was found that higher reproducibility could be obtained with SEM.