Detoxification of malachite green by Pleurotus florida laccase produced under solid-state fermentation using agricultural residues

Intermolecular degradation of aromatic compound and its derivatives via combined sequential and hybridized process

The under-treated wastewater, especially remaining carcinogenic aromatic compounds in wastewater discharge has been expansively reported, wherein the efficiency of conventional wastewater treatment is identified as the primary contributor source. Herein, the advancement of wastewater treatments has drawn much attention in recent years. In the current study, combined sequential and hybridized treatment of thermolysis and coagulation-flocculation provides a novel advancement for environmental emerging pollutant (EP) prescription. This research is mainly demonstrating the mitigation efficiency and degradation pathway of pararosaniline (PRA) hybridized and combined sequential wastewater treatment. Notably, PRA degradation dominantly via a linkage of reaction: thermal cleavage, deamination, silication and diazene reduction. Thermolysis acts as an initiator for the PRA decomposition through thermally induced bond dissociation energy (BDE) for molecular fragmentation whilst coagulation-flocculation facilitates the formation of organo-bridged silsesquioxane as the final degradation product. Different from conventional treatment, the hybridized treatment showed excellent synergistic degradability by removing 99% PRA and its EPs, followed by combined sequential treatment method with 86% reduction. Comprehensive degradation pathway breakdown of carcinogenic and hardly degradable aromatic compounds provides a new insight for wastewater treatment whereby aniline and benzene are entirely undetectable in effluent. The degradation intermediates, reaction derivatives and end products were affirmed by gas chromatography-mass spectrometry, Fourier transform infrared spectroscopy and ultraviolet-visible spectrophotometry (GC-MS, FTIR and UV-Vis). This finding provides valuable guidance in establishing efficient integrated multiple-step wastewater treatments.

Biocatalytic potential of Brassica oleracea L. var. botrytis leaves peroxidase for efficient degradation of textile dyes in aqueous medium

Dye-contaminated wastewater discharge from textile and dye manufacturing industries is reported as a world worse water polluter due to the toxic and mutagenic behavior of dyes. Peroxidase, one of the key enzymes of oxidoreductases, is widely distributed in nature and has been currently exploited in industries for various applications. Widespread applications of peroxidases are associated with their nonspecific nature towards a wide spectrum of substrates such as phenols, aromatic amines, pesticides, antibiotics, and synthetic dyes. The present study explored the potential of ammonium sulfate precipitated partially purified Brassica oleracea L. var. botrytis leaves peroxidase for degradation of reactive textile dyes Remazol Turquoise Blue 133 G and Drim Red CL4BN. Various physico-chemical parameters such as pH (2-9), temperature (20-70 ℃), enzyme activity (3-24 U/mL), concentrations of H₂O₂ (0.4-1.4 Mm) and dye (10-100 mg/L) were optimized for enzymatic decolorization of both dyes' solution. Studies revealed that maximum degradation (95%) of Remazol Turquoise Blue 133 G with peroxidase was achieved with 25 mg/L of initial dye concentration, in the presence of 0.8 mM hydrogen peroxide with 45 min of incubation time, at pH 3, 4, and 5, and 70 °C. Maximal decolorization (97%) of Drim Red CL4BN was obtained at pH 2.0, in 10 min of incubation time at 45 ℃ using o-dianisidine hydrochloride as a redox mediator. In conclusion, the findings illustrate the prospect of Brassica oleracea peroxidase to remediate dye pollutants and dye-based industrial effluents in a green technology theme.

Biodegradation mechanism of chlorpyrifos by halophilic bacterium Hortaea sp. B15

For decades, most of the developing nations have relied on chlorpyrifos for insecticidal activity in the agriculture sector. It is a common chlorinated organophosphorus pesticide that has been widely used to control insects to protect plants. This study aimed to investigate the effects of environmental characteristics such as salinity, pH, temperature, and surfactant on Hortaea sp. B15 mediated degradation of chlorpyrifos as well as enzyme activity and metabolic pathway. The highest bacterial growth (4.6 × 10¹⁶ CFU/mL) was achieved after 20 h of incubation in a 100 mg/L chlorpyrifos amended culture. The fit model and feasible way to express the chlorpyrifos biodegradation kinetics in normal condition and optimized was a first-order rate equation, with an R² value of 0.95-0.98. The optimum pH for chlorpyrifos biodegradation was pH 9, which resulted in a high removal rate (91.1%) and a maximum total count of 3.8 × 10¹⁶ CFU/mL. Increasing the temperature over 40 °C may inhibit microbial development and biodegradation. There was no significant effect of culture salinity on degradation and bacterial growth. In the presence of non-ionic surfactant Tween 80, the maximum chlorpyrifos degradation (89.5%) and bacterial growth (3.8 × 10¹⁶ CFU/mL) was achieved. Metabolites such as 3,5,6-trichloropyridin-2-ol and 2-pyridinol were identified in the Hortaea sp. B15 mediated degradation of chlorpyrifos. According to the findings, Hortaea sp. B15 should be recommended for use in the investigation of in situ biodegradation of pesticides.

Titanium lanthanum three oxides decorated magnetic graphene oxide for adsorption of lead ions from aqueous media

The current study presents a viable and straightforward method for synthesizing titanium lanthanum three oxide nanoparticles (TiLa) and their decoration onto the ferrous graphene oxide sheets to produce FeGO-TiLa as efficient magnetic adsorbent. Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and vibration sample magnetometer (VSM) were used to evaluate the physical and chemical properties of the produced nanocomposites. The FeGO-TiLa was used to enhance the removal of lead ions from aqueous solution. The FeGO-TiLa nanocomposite exhibited a much higher removal efficiency (93%) for lead ions than pure TiLa nanoparticles (81%) and magnetic graphene oxide (74%). The influence of FeGO-TiLa dosage, contact time, solution pH, solution temperature, and starting quantity on the lead ions was evaluated and adjusted. The investigations demonstrated that a pH 6 with 40 mg adsorbent resulted in >91% removal of lead ions at ambient temperature after 120 min. Isotherm models were used to analyze experimental results, and Langmuir model fitted the data well as compared Freundlich model with a maximum adsorption capacity of 109.89 mg g^-1. Kinetic and studies are performed the lead adsorption over FeGO-TiLa follow pseudo-second-order rate. Langmuir and Free energy suggested the lead ions uptake with FeGO-TiLa was monolayer and physical adsorption mechnaism, respectively. Finally, the FeGO-TiLa nanocompoiste can be used as an alternative adsorbent for water remediation.

Laccase production by Pleurotus ostreatus using cassava waste and its application in remediation of phenolic and polycyclic aromatic hydrocarbon-contaminated lignocellulosic biorefinery wastewater

The treatment of contaminants from lignocellulosic biorefinery effluent has recently been identified as a unique challenge. This study focuses on removing phenolic contaminants and polycyclic aromatic hydrocarbons (PAHs) from lignocellulosic biorefinery wastewater (BRW) applying a laccase-assisted approach. Cassava waste was used as a substrate to produce the maximum yield of laccase enzyme (3.9 U/g) from Pleurotus ostreatus. Among the different inducers supplemented, CuSO₄ (0.5 mM) showed an eight-fold increase in enzyme production (30.8 U/g) after 240 h of incubation. The catalytic efficiency of laccase was observed as 128.7 ± 8.47 S^-1mM^-1 for syringaldazine oxidation at optimum pH 4.0 and 40 °C. Laccase activity was completely inhibited by lead (II) ion, mercury (II) ion, sodium dodecyl sulphate, sodium azide and 1,4 dithiothretiol and induced significantly by manganese (II) ion and rhamnolipid. After treating BRW with laccase, the concentrations of PAHs and phenolic contaminants of 1144 μg/L and 46160 μg/L were reduced to 96 μg/L and 16100 μg/L, respectively. The ability of laccase to effectively degrade PAHs in the presence of different phenolic compounds implies that phenolic contaminants may play a role in PAHs degradation. After 240 h, organic contaminants were removed from BRW in the following order: phenol >2,4-dinitrophenol > 2-methyl-4,6-dinitrophenol > 2,3,4,6-tetrachlorophenol > acenaphthene > fluorine > phenanthrene > fluoranthene > pyrene > anthracene > chrysene > naphthalene > benzo(a)anthracene > benzo(a)pyrene > benzo(b)fluoranthene > pentachlorophenol > indeno(1,2,3-cd)pyrene > benzo(j) fluoranthene > benzo[k]fluoranthène. The multiple contaminant remediation from the BRW by enzymatic method, clearly suggests that the laccase can be used as a bioremediation tool for the treatment of wastewater from various industries.

Bioremediation potential of Dicentrarchus labrax fish scales for dye-based emerging contaminants by ANN-GA hybrid modeling

This work investigates the possibility of using scales of sea bass Dicentrarchus labrax as a low-cost material for the adsorptive removal of methylene blue (MB) cationic dye in aqueous solutions. The physical-chemical characterizations of fish scales in natura (FS-in natura) revealed through thermogravimetry that they are composed of inorganic (hydroxyapatite) and organic (collagen) phases in relatively similar amounts. Spectroscopy analyses show that the interactions of MB with FS-in natura occur mainly in the organic phase layer of the adsorbent. The effects of initial MB concentration (5.0 × 10^-4 and 5.0 × 10^-3 mol L^-1) and temperature (25-55 °C) on the adsorption efficiency of FS-in natura were evaluated. FS-in natura at MB concentration (5.0 × 10^-3 and 5.0 × 10^-4 mol L^-1) exhibited the maximum adsorption capacities of 2.2 × 10^-3 mol g^-1 at 25 °C and 2.8 × 10^-5 mol g^-1 at 55 °C, respectively. The pseudo-second-order model represented the adsorption kinetics well, and the equilibrium isotherm data were better correlated using the Langmuir equation. The newly developed neural model demonstrated a high predictive capacity with an R-value greater than 0.99 and reduced values for mean squared error, root mean squared error, and mean absolute error equal to 0.003, 0.055, and 0.0348, respectively. The genetic algorithm was used to optimize the experimental conditions of the process. In conclusion, the sea bass scales have promising prospects as a low-cost alternative material for removing cationic dyes from aqueous solutions.

Removal of dyes by immobilization of Trametes versicolor in a solid-state micro-fermentation system

A novel bioreactor system (low cost and easily scaled-up) is presented for dye decolorization applying filamentous fungi. In this two-phase bioreactor, dyes were decolorized at 28°C in a first phase by immobilized fungi in spherical cartridges prepared with a high-density plastic polyethylene mesh and filled with wheat bran as substrate for growth. In a second phase the capacity of the ligninolytic enzymes (laccase and Mn-peroxidase) present in the extracellular extracts from the solid residues was exploited for decolorization at 50°C. Each sphere behaved as a small-scale bioreactor for cell-culture. This system allowed the decoupling of growth (sterile condition) and decolorization (non-sterile condition) stages. The ability to decolorize the azo dye xylidine and the triphenylmethane Malachite Green by two Argentinean strains of Trametes versicolor was evaluated. The highest decolorization rates were displayed by T. versicolor BAFC 2234. When both dyes were applied together in the bioreactor, after a first phase (100min) 73.5% of Malachite Green and 40% of xylidine decolorization was attained, while at the end of the second phase (240min) a 97% and 52% decolorization was observed. Laccase activity was detected in the decolorized solution, but no Mn-peroxidase activity. The easy change of the cartridges allows the continuous use of the bioreactor in the non-sterile decolorization of dye-containing effluents.

Decolorization and Detoxification of Synthetic Dyes by Mexican Strains of Trametes sp

Laccases have attracted a great deal of interest because of their remarkable ability for the degradation of synthetic dyes present in wastewaters. New laccase producing sources with robust operational and functional properties are being continuously explored. In this work, the potential for the decolorization and detoxification of synthetic dyes was evaluated in two Mexican strains of the genus Trametes. The decolorization capacity of Trametesmaxima LE130 and Trametes sp. LA1 was tested in solid and liquid media. The phytotoxicity of the degradation products was determined using Raphanussativus and Pisum sativum seeds. In solid media, both strains showed a higher decolorization capacity (p ≤ 0.05) than Phanerochaetechrysosporium ATCC 24725, which is known to be very efficient in lignin and dye-degradation. They produced laccase as the main ligninolytic enzyme; T. maxima LE130 secreted a single isoform of 43.9 kDa, while Trametes sp. LA1 produced three isoforms of 67.3, 58.6 and 52.7 kDa, respectively. Trametes sp. LA1 culture fluids were capable of decolorizing and detoxifying chemically diverse dyes (anthraquinonic dye Remazol Brilliant Blue R, azoic Reactive Black 5 and triphenylmethane Crystal Violet) without the addition of redox mediators. Therefore, this could be considered as a new laccase source which could be potentially competitive in the bioremediation of dye-containing wastewaters.

Bioprocess optimization of laccase production through solid substrate fermentation using Perenniporia tephropora-L168 and its application in bioremediation of triaryl-methane dye

Laccases are multi copper oxidases that can oxidize both phenolic and nonphenolic lignin related compounds. Consequently, there has been continuous demand for laccases for the oxidative degradation of phenolic dyes in effluents. In view of this, the present work was focused on laccase production by solid substrate fermentation using a newly isolated fungus Perenniporia tephropora-L168. To intensify the laccase production, the process parameters pH, nitrogen, inducer, and substrate: water ratio were optimized by using statistical model. A set of optimal conditions noted were pH 3, nitrogen 0.001 g/L; inducer 0.5% and substrate: water ratio (1:10), which yielded laccase 1,160 U/g. The crude laccase exhibited noteworthy potential to degrade a triaryl-methane dye especially Malachite green. Also, during bioremediation studies, the statistical process optimization could achieve 81% decolourization within 180 min. The laccase treatment brought chemical transformation in malachite green as evident from UV-Visible spectra, FTIR, HPLC while toxicity against bacteria and fungi was also reduced. During phytotoxicity study, effect of treated and untreated dye on germination of seed was analyzed. Interestingly, the germination index for Vigna aconitifolia and Vigna radiata was increased by two and fourfold, respectively. Overall, this work demonstrates optimized production of laccase using Perenniporia tephropora-L168 and its efficient bioremediation potential for triaryl-methane dye.

Elevated levels of laccase synthesis by Pleurotus pulmonarius BPSM10 and its potential as a dye decolorizing agent

Laccases (EC 1.10.3.2) are a class of multi-copper oxidases that have industrial value. In the present study, forty-five isolates of wild mushrooms were screened for laccase production. Eight of the isolates exhibited exploitable levels of substrate oxidation capacity. Isolate BPSM10 exhibited the highest laccase activity of 103.50 U/ml. Internal Transcribed Spacer (ITS) rRNA gene sequencing was used to identify BPSM10 as Pleurotus pulmonarius. The response of BPSM10 to two nutritional media supplemented with various inducers was characterized and the results indicated that Malt Extract Broth (MEB) supplemented with Xylidine increased laccase production by 2.8× (349.5 U/ml) relative to the control (122 U/ml), while Potato Dextrose Broth (PDB) supplemented with xylidine increased laccase production by 1.9× (286 U/ml). BPSM10 has the ability to decolorize seven synthetic dyes in a liquid medium. Maximum decolorization was observed of malachite green (MG); exhibiting 68.6% decolorization at 100 mg/L. Fourier-transform infrared spectroscopy (FTIR) was employed to confirm the decolorization capacity. The present study indicates that P. pulmonarius BPSM10 has the potential to be used as a potent alternative biosorbent for the removal of synthetic dyes from aqueous solutions, especially in the detoxification of polluted water.

Identification and evaluation of bioremediation potential of laccase isoforms produced by Cyathus bulleri on wheat bran

Multiplicity in laccases among lignin degrading fungal species is of interest as it confers the ability to degrade several types of lignocellulosics. The combination of laccases produced on such substrates could be beneficial for treatment of complex aromatics, including dyes. In this study, we report on production of high units (679.6Ug^-1 substrate) of laccase on solid wheat bran (WB) by Cyathus bulleri. Laccase, purified from the culture filtrates of WB grown fungus, was effective for oxidation of veratryl alcohol, Reactive blue 21 and textile effluent without assistance of externally added mediators. De novo sequencing of the 'purified' laccase lead to identification of several peptides that originated from different laccase genes. Transcriptome analysis of the fungus, cultivated on WB, confirmed presence of 8 isozymes, that were re-amplified and sequenced from the cDNA prepared from WB grown fungus. The 8 isozymes were grouped into 3 classes, based on their sequence relationship with other basidiomycete laccases. The isoforms produced on WB decolorized (by ∼57%) and degraded textile effluent far more effectively, compared to laccase obtained from Basal salt cultivated fungus. The decolorization and degradation was also accompanied by more than 95% reduction in phytotoxicity.

Simultaneous production of laccase and degradation of bisphenol A with Trametes versicolor cultivated on agricultural wastes

Solid state fermentation with Trametes versicolor was carried out on agricultural wastes containing bisphenol A (BPA). It was found that BPA degradation was along with the occurrence of laccase production, and wheat bran and corn straw were identified as suitable mixed substrates for laccase production. In the process of BPA degradation with T. versicolor, laccase activity increased rapidly at the 6th-10th day after inoculation. Moreover, BPA can enhance the production of laccase. After 10 days of fermentation, degradation rate of BPA exceeded 90% without the usage of mediators ABTS and acetosyringone at pH 4.0-8.0. In addition, metal ions did not affect the BPA degradation with T. versicolor. In vitro, the optimum pH range of BPA degradation with laccase was in the acidic region with the optimal performance of pH 5.0. Metal ions Cu²⁺, Zn²⁺, and Co²⁺ showed little effect on BPA degradation. However, Fe³⁺ and Fe²⁺ substantially inhibited the BPA degradation. Natural mediator acetosyringone showed optimum enhancement on BPA degradation. Greater than 90% of the estrogenic activity of BPA was removed by T. versicolor and its laccase. Compared to in vitro degradation with laccase, this study shows that the process of simultaneous laccase production and BPA degradation with T. versicolor was more advantageous since BPA can enhance the laccase production, mediators were unnecessary, degradation rate was not affected by metal ions, and the applicable pH range was broader. This study concludes that T. versicolor and laccase have great potential to treat industrial wastewater containing BPA.

Evaluation of agro-industrial wastes, their state, and mixing ratio for maximum polygalacturonase and biomass production in submerged fermentation

The potential of important agro-industrial wastes, apple pomace (AP) and orange peel (OP) as C sources, was investigated in the maximization of polygalacturonase (PG), an industrially significant enzyme, using an industrially important microorganism Aspergillus sojae. Factors such as various hydrolysis forms of the C sources (hydrolysed-AP, non-hydrolysed-AP, hydrolysed-AP + OP, non-hydrolysed-AP + OP) and N sources (ammonium sulphate and urea), and incubation time (4, 6, and 8 days) were screened. It was observed that maximum PG activity was achieved at a combination of non-hydrolysed-AP + OP and ammonium sulphate with eight days of incubation. For the pre-optimization study, ammonium sulphate concentration and the mixing ratios of AP + OP at different total C concentrations (9, 15, 21 g l(-1)) were evaluated. The optimum conditions for the maximum PG production (144.96 U ml(-1)) was found as 21 g l(-1) total carbohydrate concentration totally coming from OP at 15 g l(-1) ammonium sulphate concentration. On the other hand, 3:1 mixing ratio of OP + AP at 11.50 g l(-1) ammonium sulphate concentration also resulted in a considerable PG activity (115.73 U ml(-1)). These results demonstrated that AP can be evaluated as an additional C source to OP for PG production, which in turn both can be alternative solutions for the elimination of the waste accumulation in the food industry with economical returns.

Biodegradation of naphthalenesulphonate polymers: the potential of a combined application of fungi and bacteria

The potential of several fungi and their synergy with bacterial biomasses were evaluated as a solution for the removal of 2-naphthalensulphonic acid polymers (2-NSAPs) from petrochemical wastewater, characterized by a chemical oxygen demand (COD) greater than 9000 mg/L. The ability of fungi to grow on 2-NSAP mixtures was preliminarily investigated using a solid medium, and then the action of the selected strains, both in suspended and immobilized form, was evaluated in terms of degradation, depolymerization, sorption and an increase in biodegradability of 2-NSAP. Among the 25 fungi evaluated two, in particular, Bjerkandera adusta and Pleurotus ostreatus, have been found to significantly depolymerize 2-NSAP yielding to the corresponding monomer (2-naphthalenesulphonic acid, 2-NSA), which has been further degraded by a bacterial consortia selected in a wastewater treatment plant (WWTP). The fungal treatment alone was able to reduce the COD value up to 44%, while activated sludge removed only 9% of the initial COD. In addition, the combined treatment (fungi and bacteria) allowed an increase in the COD removal up to 62%.

Bacterial–yeast consortium as an effective biocatalyst for biodegradation of sulphonated azo dye Reactive Red 198

A novel bacterial–yeast consortium (Brevibacillus laterosporusandGalactomyces geotrichum) acts as a proficient biocatalyst.

Bioremoval of Reactive Blue 220 by Gonium sp. biomass

Gonium sp. was tested for the bioremoval of Reactive Blue 220 (RB220) dye at different conditions such as pH values, initial dye concentrations and biomass concentrations to evaluate the possibility of using this microalga in treating wastewaters. According to the data obtained from the experiments, microalgae removed RB220 with the highest yield (54.2%) at pH 8, and could treat the applied dye with the highest removal percentage as 84.2% at the lowest dye concentration (26.2 mg/L RB220). Increasing Gonium sp. biomass concentration from 0.21 to 0.53 g/L stimulated RB220 removal rate from 87.7% to 96.8%. The present study clearly indicated that Gonium sp. biomass could be used as a bioremediation biosorbent in treating RB220 dye in the related wastewaters.

Flavonoid-rich plants used as sole substrate to induce the solid-state fermentation of laccase

High cost becomes the major obstacle for the industrial application of laccase. Many approaches have been applied to enhance the yield and decrease the cost of laccase. Since flavonoids are the natural inducers for laccase production, in this article, flavonoid-rich plants were taken as the sole substrate for the solid-state fermentation of Funalia trogii (Cui 3676). It indicated that flavonoid-rich plants can effectively promote the production of F. trogii laccase without the addition of inducers. The laccase activity was 42.5 IU g(-1) substrate when kudzu vine root was used as the substrate, which was enhanced by 4.46 times than that when bran was used as the substrate. Meanwhile, the solid-state fermentation of laccase could enrich flavonoids, benefiting their extraction. The content of flavonoids extracted from fermented kudzu vine root and Ginkgo biloba leaves was enhanced by 56.41 and 24.11 %, respectively, compared to the unfermented substrate, and the relative reductive ability and scavenging ability of hydroxyl radicals of flavonoids in the fermented residues were essentially unchanged. Thus, flavonoid-rich plants will become a kind of potential substrate for laccase fermentation which is beneficial in enhancing the yield and reducing the cost of laccase.