In vitro reactivation of spindle elongation in fission yeast nuc2 mutant cells

Viscoelastic Relaxation of the Nuclear Envelope Does Not Cause the Collapse of the Spindle After Ablation in S. pombe

A large molecular machine called the mitotic spindle is responsible for accurate chromosome segregation in eukaryotic cells. The spindle consists of protein filaments known as microtubules and microtubule-associated proteins such as motors and crosslinkers, which help impart its organization. In the case of the fission yeast S. pombe, these form a single bundle inside the nucleus. During spindle elongation, sliding by motor proteins provides an internal source of extensile forces, which are resisted by the compressive forces of the nuclear envelope. To probe the sources of this force balance, we cut the spindle using focused laser light at various stages of spindle elongation. We find that the spindle pole bodies collapse toward each other post-ablation. While this basic behavior has been previously observed, many questions remain about the timing, mechanics, and molecular requirements of this phenomenon. Here, we quantify the time scale of the relaxation and probe its underlying mechanism. We demonstrate that viscoelastic relaxation of the nuclear envelope cannot explain this phenomenon and provide evidence of active forces as the underlying mechanism.

Mechanisms of spindle assembly and size control

The spindle is crucial for cell division by allowing the faithful segregation of replicated chromosomes to daughter cells. Proper segregation is ensured only if microtubules (MTs) and hundreds of other associated factors interact to assemble this complex structure with the appropriate architecture and size. In this review, we describe the latest view of spindle organisation as well as the molecular gradients and mechanisms underlying MT nucleation and spindle assembly. We then discuss the overlapping physical and molecular constraints that dictate spindle morphology, concluding with a focus on spindle size regulation.

Electron tomography reveals aspects of spindle structure important for mechanical stability at metaphase

Metaphase spindles exert pole-directed forces on still-connected sister kinetochores. The spindle must counter these forces with extensive forces to prevent spindle collapse. In small spindles, kinetochore microtubules (KMTs) connect directly with the poles, and countering forces are supplied either by interdigitating MTs that form interpolar bundles or by astral MTs connected to the cell cortex. In bigger spindles, particularly those without structured poles, the origin of extensive forces is less obvious. We have used electron tomography of well-preserved metaphase cells to obtain structural evidence about interactions among different classes of MTs in metaphase spindles from Chlamydomonas rheinhardti and two strains of cultured mammalian cells. In all these spindles, KMTs approach close to and cross-bridge with the minus ends of non-KMTs, which form a framework that interdigitates near the spindle equator. Although this structure is not pole-connected, its organization suggests that it can support kinetochore tension. Analogous arrangements of MTs have been seen in even bigger spindles, such as metaphase spindles in Haemanthus endosperm and frog egg extracts. We present and discuss a hypothesis that rationalizes changes in spindle design with spindle size based on the negative exponential distribution of MT lengths in dynamically unstable populations of tubulin polymers.

Assessing the Contributions of Motor Enzymes and Microtubule Dynamics to Mitotic Chromosome Motions

During my graduate work with Keith Porter, I became fascinated by the mitotic spindle, an interest that has motivated much of my scientific work ever since. I began spindle studies by using electron microscopes, instruments that have made significant contributions to our understanding of spindle organization. Such instruments have helped to elucidate the distributions of spindle microtubules, the interactions among them, their molecular polarity, and their associations with both kinetochores and spindle poles. Our lab has also investigated some processes of spindle physiology: microtubule dynamics, the actions of microtubule-associated proteins (including motor enzymes), the character of forces generated by specific spindle components, and factors that control mitotic progression. Here, I give a personal perspective on some of this intellectual history and on what recent discoveries imply about the mechanisms of chromosome motion.

Mitotic spindle: kinetochore fibers hold on tight to interpolar bundles

When a cell starts to divide, it forms a spindle, a micro-machine made of microtubules, which separates the duplicated chromosomes. The attachment of microtubules to chromosomes is mediated by kinetochores, protein complexes on the chromosome. Spindle microtubules can be divided into three major classes: kinetochore microtubules, which form k-fibers ending at the kinetochore; interpolar microtubules, which extend from the opposite sides of the spindle and interact in the middle; and astral microtubules, which extend towards the cell cortex. Recent work in human cells has shown a close relationship between interpolar and kinetochore microtubules, where interpolar bundles are attached laterally to kinetochore fibers almost all along their length, acting as a bridge between sister k-fibers. Most of the interpolar bundles are attached to a pair of sister kinetochore fibers and vice versa. Thus, the spindle is made of modules consisting of a pair of sister kinetochore fibers and a bundle of interpolar microtubules that connects them. These interpolar bundles, termed bridging fibers, balance the forces acting at kinetochores and support the rounded shape of the spindle during metaphase. This review discusses the structure, function, and formation of kinetochore fibers and interpolar bundles, with an emphasis on how they interact. Their connections have an impact on the force balance in the spindle and on chromosome movement during mitosis because the forces in interpolar bundles are transmitted to kinetochore fibers and hence to kinetochores through these connections.

A Brief History of Research on Mitotic Mechanisms

This chapter describes in summary form some of the most important research on chromosome segregation, from the discovery and naming of mitosis in the nineteenth century until around 1990. It gives both historical and scientific background for the nine chapters that follow, each of which provides an up-to-date review of a specific aspect of mitotic mechanism. Here, we trace the fruits of each new technology that allowed a deeper understanding of mitosis and its underlying mechanisms. We describe how light microscopy, including phase, polarization, and fluorescence optics, provided descriptive information about mitotic events and also enabled important experimentation on mitotic functions, such as the dynamics of spindle fibers and the forces generated for chromosome movement. We describe studies by electron microscopy, including quantitative work with serial section reconstructions. We review early results from spindle biochemistry and genetics, coupled to molecular biology, as these methods allowed scholars to identify key molecular components of mitotic mechanisms. We also review hypotheses about mitotic mechanisms whose testing led to a deeper understanding of this fundamental biological event. Our goal is to provide modern scientists with an appreciation of the work that has laid the foundations for their current work and interests.

Pivoting of microtubules around the spindle pole accelerates kinetochore capture

During cell division, spindle microtubules attach to chromosomes through kinetochores, protein complexes on the chromosome. The central question is how microtubules find kinetochores. According to the pioneering idea termed search-and-capture, numerous microtubules grow from a centrosome in all directions and by chance capture kinetochores. The efficiency of search-and-capture can be improved by a bias in microtubule growth towards the kinetochores, by nucleation of microtubules at the kinetochores and at spindle microtubules, by kinetochore movement, or by a combination of these processes. Here we show in fission yeast that kinetochores are captured by microtubules pivoting around the spindle pole, instead of growing towards the kinetochores. This pivoting motion of microtubules is random and independent of ATP-driven motor activity. By introducing a theoretical model, we show that the measured random movement of microtubules and kinetochores is sufficient to explain the process of kinetochore capture. Our theory predicts that the speed of capture depends mainly on how fast microtubules pivot, which was confirmed experimentally by speeding up and slowing down microtubule pivoting. Thus, pivoting motion allows microtubules to explore space laterally, as they search for targets such as kinetochores.

Biophysics of mitosis

Mitosis is the process by which eukaryotic cells organize and segregate their chromosomes in preparation for cell division. It is accomplished by a cellular machine composed largely of microtubules (MTs) and their associated proteins. This article reviews literature on mitosis from a biophysical point of view, drawing attention to the assembly and motility processes required to do this complex job with precision. Work from both the recent and the older literature is integrated into a description of relevant biological events and the experiments that probe their mechanisms. Theoretical work on specific subprocesses is also reviewed. Our goal is to provide a document that will expose biophysicists to the fascination of this quite amazing process and provide them with a good background from which they can pursue their own research interests in the subject.

Cytoplasmic microtubule organization in fission yeast

During the cell cycle of the fission yeast Schizosaccharomyces pombe, striking changes in the organization of the cytoplasmic microtubule cytoskeleton take place. These may serve as a model for understanding the different modes of microtubule organization that are often characteristic of differentiated higher eukaryotic cells. In the last few years, considerable progress has been made in our understanding of the organization and behaviour of fission yeast cytoplasmic microtubules, not only in the identification of the genes and proteins involved but also in the physiological analysis of function using fluorescently-tagged proteins in vivo. In this review we discuss the state of our knowledge in three areas: microtubule nucleation, regulation of microtubule dynamics and the organization and polarity of microtubule bundles. Advances in these areas provide a solid framework for a more detailed understanding of cytoplasmic microtubule organization.

Schizosaccharomyces pombehomolog of Survivin, Bir1p, exhibits a novel dynamic behavior at the spindle mid-zone

Members of the BIR-domain containing Survivin family of proteins have been identified in a variety of eukaryotes and are known to play important roles in the regulation of mitosis. The Schizosaccharomyces pombe homolog of Survivin, Bir1p, is essential for chromosome condensation and spindle elongation and integrity. Bir1p, a nuclear protein, resides at the kinetochores in metaphase and anaphase A and spreads to the spindle mid-zone in anaphase B. Here we show that this relocation requires Cdk (Cyclin dependent kinase) inactivation and intact microtubules. With the aid of a kinesin mutant, klp5Delta, we also show that completion of anaphase A is vital for effecting Bir1p re-location to the spindle mid-zone. Although minimal exchange of Bir1p sub-units occurs between the spindle and the nucleoplasm, the protein redistributes laterally within the mid-zone region. Bir1p dynamics therefore significantly differs from that of tubulin on an anaphase B spindle, which is loaded at the plus ends of growing microtubules and shows no lateral redistribution within the spindle. Thus, Bir1p, and possibly its associated proteins, might organize a dynamic mid-zone region that helps spindle elongation and maintenance.

The roles of fission yeast ase1 in mitotic cell division, meiotic nuclear oscillation, and cytokinesis checkpoint signaling

The Ase1/Prc1 proteins constitute a conserved microtubule-associated protein family that is implicated in central spindle formation and cytokinesis. Here we characterize a role for fission yeast Ase1. Ase1 localizes to microtubule overlapping zones and displays dynamic alterations of localization during the cell cycle. In particular, its spindle localization during metaphase is reduced substantially, followed by robust appearance at the spindle midzone in anaphase. ase1 deletions are viable but defective in nuclear and septum positioning and completion of cytokinesis, which leads to diploidization and chromosome loss. Time-lapse imaging shows that elongating spindles collapse abruptly in the middle of anaphase B. Either absence or overproduction of Ase1 results in profound defects on microtubule bundling in an opposed manner, indicating that Ase1 is a dose-dependent microtubule-bundling factor. In contrast microtubule nucleating activities are not noticeably compromised in ase1 mutants. During meiosis astral microtubules are not bundled and oscillatory nuclear movement is impaired significantly. The Aurora kinase does not correctly localize to central spindles in the absence of Ase1. Finally Ase1 acts as a regulatory component in the cytokinesis checkpoint that operates to inhibit nuclear division when the cytokinesis apparatus is perturbed. Ase1, therefore, couples anaphase completion with cytokinesis upon cell division.

Mitotic spindle: laser microsurgery in yeast cells

Laser microsurgery has led to remarkable discoveries in a number of cell types. Two recent studies have shown that this classical technology can now be employed with small yeast cells. This advance will enable regional ablation to be combined with facile genetic manipulation in a eukaryotic cell.

Positioning and elongation of the fission yeast spindle by microtubule-based pushing

In eukaryotic cells, proper position of the mitotic spindle is necessary for successful cell division and development. We explored the nature of forces governing the positioning and elongation of the mitotic spindle in Schizosaccharomyces pombe. We hypothesized that astral microtubules exert mechanical force on the S. pombe spindle and thus help align the spindle with the major axis of the cell. Microtubules were tagged with green fluorescent protein (GFP) and visualized by two-photon microscopy. Forces were inferred both from time-lapse imaging of mitotic cells and, more directly, from mechanical perturbations induced by laser dissection of the spindle and astral microtubules. We found that astral microtubules push on the spindle poles in S. pombe, in contrast to the pulling forces observed in a number of other cell types. Further, laser dissection of the spindle midzone induced spindle collapse inward. This offers direct evidence in support of the hypothesis that spindle elongation is driven by the sliding apart of antiparallel microtubules in the spindle midzone. Broken spindles recovered and mitosis completed as usual. We propose a model of spindle centering and elongation by microtubule-based pushing forces.

Live analysis of lagging chromosomes during anaphase and their effect on spindle elongation rate in fission yeast

The fission yeast Schizosaccharomyces pombe is widely used as a model system for studies of the cell cycle and chromosome biology. To enhance these studies we have fused GFP to the chromodomain protein Swi6p, thus allowing nuclear and chromosome behaviour to be followed in living cells using time-lapse fluorescence microscopy. Like endogenous Swi6p, GFP-Swi6p localises to the nucleus and is concentrated at the heterochromatic centromeres and telomeres. The nucleus is highly dynamic during interphase: the clustered centromeres, in particular, are highly mobile. By expressing GFP-(α)2-tubulin and GFP-Swi6p in the same cells we observe that the clustered centromeres move in concert with the cytoplasmic microtubules, which is likely to reflect their association with the spindle pole body. Drug treatment indicates that this movement is dependent on intact cytoplasmic microtubules. We have also used GFP-Swi6p to investigate the properties of lagging chromosomes observed in mutants with defects in chromosome segregation. Lagging chromosomes display a variety of behaviours on anaphase spindles, most surprisingly, chromosomes appear to initiate microtubule interactions and move to the poles late in anaphase B. Interestingly, in cells displaying lagging chromosomes, the rate of spindle elongation is slowed by a factor of two. This suggests that cells are able to sense the presence of a lagging chromosome and slow anaphase B in order to allow it extra time to reach the pole. However, this mechanism is not dependent on the spindle checkpoint proteins Bub1p or Dma1p, raising the possibility that a novel checkpoint mechanism operates to retard spindle elongation if lagging chromosomes are detected. An alternative model is also discussed in which single defective kinetochores on lagging chromatids are able to interact simultaneously with microtubules emanating from both poles and affect spindle dynamics by counteracting the spindle elongation force.

Identification of ribonucleotide reductase protein R1 as an activator of microtubule nucleation in Xenopus egg mitotic extracts

Microtubule nucleation on the centrosome and the fungal equivalent, the spindle pole body (SPB), is activated at the onset of mitosis. We previously reported that mitotic extracts prepared from Xenopus unfertilized eggs convert the interphase SPB of fission yeast into a competent state for microtubule nucleation. In this study, we have purified an 85-kDa SPB activator from the extracts and identified it as the ribonucleotide reductase large subunit R1. We further confirmed that recombinant mouse R1 protein was also effective for SPB activation. On the other hand, another essential subunit of ribonucleotide reductase, R2 protein, was not required for SPB activation. SPB activation by R1 protein was suppressed in the presence of anti-R1 antibodies or a partial oligopeptide of R1; the oligopeptide also inhibited aster formation on Xenopus sperm centrosomes. In accordance, R1 was detected in animal centrosomes by immunofluorescence and immunoblotting with anti-R1 antibodies. In addition, recombinant mouse R1 protein bound to gamma- and alpha/beta-tubulin in vitro. These results suggest that R1 is a bifunctional protein that acts on both ribonucleotide reduction and centrosome/SPB activation.

Cytokinesis and midzone microtubule organization in Caenorhabditis elegans require the kinesin-like protein ZEN-4

Members of the MKLP1 subfamily of kinesin motor proteins localize to the equatorial region of the spindle midzone and are capable of bundling antiparallel microtubules in vitro. Despite these intriguing characteristics, it is unclear what role these kinesins play in dividing cells, particularly within the context of a developing embryo. Here, we report the identification of a null allele of zen-4, an MKLP1 homologue in the nematode Caenorhabditis elegans, and demonstrate that ZEN-4 is essential for cytokinesis. Embryos deprived of ZEN-4 form multinucleate single-celled embryos as they continue to cycle through mitosis but fail to complete cell division. Initiation of the cytokinetic furrow occurs at the normal time and place, but furrow propagation halts prematurely. Time-lapse recordings and microtubule staining reveal that the cytokinesis defect is preceded by the dissociation of the midzone microtubules. We show that ZEN-4 protein localizes to the spindle midzone during anaphase and persists at the midbody region throughout cytokinesis. We propose that ZEN-4 directly cross-links the midzone microtubules and suggest that these microtubules are required for the completion of cytokinesis.

Cell model systems in plant cytoskeleton studies

Cytoskeletons play an essential role in cellular functions in both animal and plant cells. In studies of the molecular mechanisms of their functions, a variety of cell model systems, mainly of animal cells, have yielded much information. With plant cells, cell model systems have mostly been restricted to studies on the mechanism of cytoplasmic streaming. Recently, however, there have been several reports of studies employing plant cell model systems to investigate plant cytoskeletons that have revealed new concepts about their structure and functions. To promote and support a general understanding of cell model systems, this review attempts to categorize them, present currently known information on the structure and function of plant cytoskeletons, and offer a possible role of cell model systems in future studies of plant cytoskeletons.

Fission yeast pkl1 is a kinesin-related protein involved in mitotic spindle function

We have used anti-peptide antibodies raised against highly conserved regions of the kinesin motor domain to identify kinesin-related proteins in the fission yeast Schizosaccharomyces pombe. Here we report the identification of a new kinesin-related protein, which we have named pkl1. Sequence homology and domain organization place pkl1 in the Kar3/ncd subfamily of kinesin-related proteins. Bacterially expressed pkl1 fusion proteins display microtubule-stimulated ATPase activity, nucleotide-sensitive binding, and bundling of microtubules. Immunofluorescence studies with affinity-purified antibodies indicate that the pkl1 protein localizes to the nucleus and the mitotic spindle. Pkl1 null mutants are viable but have increased sensitivity to microtubule-disrupting drugs. Disruption of pkl1+ suppresses mutations in another kinesin-related protein, cut7, which is known to act in the spindle. Overexpression of pkl1 to very high levels causes a similar phenotype to that seen in cut7 mutants: V-shaped and star-shaped microtubule structures are observed, which we interpret to be spindles with unseparated spindle poles. These observations suggest that pkl1 and cut7 provide opposing forces in the spindle. We propose that pkl1 functions as a microtubule-dependent motor that is involved in microtubule organization in the mitotic spindle.

DSK1, a novel kinesin-related protein from the diatom Cylindrotheca fusiformis that is involved in anaphase spindle elongation

We have identified an 80-kD protein that is involved in mitotic spindle elongation in the diatom Cylindrotheca fusiformis. DSK1 (Diatom Spindle Kinesin 1) was isolated using a peptide antibody raised against a conserved region in the motor domain of the kinesin superfamily. By sequence homology, DSK1 belongs to the central motor family of kinesin-related proteins. Immunoblots using an antibody raised against a non-conserved region of DSK1 show that DSK1 is greatly enriched in mitotic spindle preparations. Anti-DSK1 stains in diatom central spindle with a bias toward the midzone, and staining is retained in the spindle midzone during spindle elongation in vitro. Furthermore, preincubation with anti-DSK1 blocks function in an in vitro spindle elongation assay. This inhibition of spindle elongation can be rescued by preincubating concurrently with the fusion protein against which anti-DSK1 was raised. We conclude that DSK1 is involved in spindle elongation and is likely to be responsible for pushing hal-spindles apart in the spindle midzone.

Forces acting on the fission yeast anaphase spindle

The fission yeast mitotic spindle consists of three sets of microtubules: one that extends between the chromosomes and the spindle pole bodies (SPBs); one that extends between the two SPBs forming a region of overlap; and a third, the so-called astral microtubules, that associates laterally with the cytoplasmic face of the SPBs, during anaphase B. The major bundles of the latter can exist with equal probability in two configurations which we have termed parallel and convergent. Mitosis in fission yeast is characterised by an extended anaphase B during which the spindle elongates from 2 mu m (the diameter of the interphase nucleus) to about 14 mu m, spanning the entire length of the cell. Anaphase B spindles viewed by indirect immunofluorescence microscopy frequently appeared bowed but only when the astral microtubules were in the convergent orientation. To investigate the possible significance of this observation, we have examined the situation in the abnormally long spindles that are formed in cells in which cell length has been extended either by overexpression of the weel + gene or by inactivation of the cdc25 + gene. The spindles in these strains were often considerably longer (up to 30 mu m) than in wild type cells but, unlike the latter, did not extend the entire length of the cell. Bowed spindles were again observed but only when the astral microtubules were convergent. We discuss these findings in the context of the astral microtubules either exerting a pulling force on the poles of the anaphase B spindle, or counteracting a pushing force generated by sliding of anti-parallel pole to pole microtubules of the mitotic spindle, or both of the above.

Role of gamma-tubulin in mitosis-specific microtubule nucleation from the Schizosaccharomyces pombe spindle pole body

The ability of the Schizosacchromyces pombe spindle pole body to nucleate microtubules is activated at the onset of mitosis for forming a mitotic spindle, but it is inactivated during interphase. We have previously developed an in vitro assay for studying the molecular mechanism of spindle pole body activation using permeabilized interphase S. pombe cells and Xenopus mitotic extracts. We have shown that the interphase spindle pole body is activated indirectly by p34cdc2 protein kinase in Xenopus mitotic extracts. In this study we examined the role of gamma-tubulin, a component of both interphase and mitotic spindle pole body, in formation of the microtubule nucleating complex at the mitotic spindle pole body. A polyclonal antibody specific to S. pombe gamma-tubulin inhibited both activation of the interphase spindle pole body and microtubule nucleation from the mitotic spindle pole body. Addition of bacterially expressed S. pombe gamma-tubulin or its amino-terminal fragments to Xenopus mitotic extracts inhibited spindle pole body activation. Affinity chromatography of partially fractionated Xenopus mitotic extracts with the amino-terminal fragment of S. pombe gamma-tubulin showed that fractions bound to the fragment supported the activation. The fractions did not contain Xenopus gamma-tubulin, showing that activation of the spindle pole body is not due to recruitment of Xenopus gamma-tubulin to the spindle pole body. The spindle pole body activation occurred in extracts depleted of p34cdc2 protein kinase or MAP kinase. The activity of the fractions bound to the fragment was inhibited by a protein kinase inhibitor, staurosporine. These results suggest that S. pombe gamma-tubulin is a component of the microtubule nucleating complex, and that the function of proteins that interact with gamma-tubulin is required for activation of the spindle pole body. We present possible models for the activation that convert the immature microtubule nucleating complex at interphase into the mature microtubule nucleating complex at mitosis.

Two microtubule-associated proteins required for anaphase spindle movement in Saccharomyces cerevisiae

In many eucaryotic cells, the midzone of the mitotic spindle forms a distinct structure containing a specific set of proteins. We have isolated ASE1, a gene encoding a component of the Saccharomyces cerevisiae spindle midzone. Strains lacking both ASE1 and BIK1, which encodes an S. cerevisiae microtubule-associated protein, are inviable. The analysis of the phenotype of a bik1 ase1 conditional double mutant suggests that BIK1 and ASE1 are not required for the assembly of a bipolar spindle, but are essential for anaphase spindle elongation. The steady-state levels of Ase1p are regulated in a manner that is consistent with a function during anaphase: they are low in G1, accumulate to maximal levels after S phase and then drop as cells exit mitosis. Components of the spindle midzone may therefore be required in vivo for anaphase spindle movement. Additionally, anaphase spindle movement may depend on a dedicated set of genes whose expression is induced at G2/M.

The product of the spindle formation gene sad1+ associates with the fission yeast spindle pole body and is essential for viability

Spindle formation in fission yeast occurs by the interdigitation of two microtubule arrays extending from duplicated spindle pole bodies which span the nuclear membrane. By screening a bank of temperature-sensitive mutants by anti-tubulin immunofluorescence microscopy, we previously identified the sad1.1 mutation (Hagan, I., and M. Yanagida. 1990. Nature (Lond.). 347:563-566). Here we describe the isolation and characterization of the sad1+ gene. We show that the sad1.1 mutation affected both spindle formation and function. The sad1+ gene is a novel essential gene that encodes a protein with a predicted molecular mass of 58 kD. Deletion of the gene was lethal resulting in identical phenotypes to the sad1.1 mutation. Sequence analysis predicted a potential membrane-spanning domain and an acidic amino terminus. Sad1 protein migrated as two bands of 82 and 84 kD on SDS-PAGE, considerably slower than its predicted mobility, and was exclusively associated with the spindle pole body (SPB) throughout the mitotic and meiotic cycles. Microtubule integrity was not required for Sad1 association with the SPB. Upon the differentiation of the SPB in metaphase of meiosis II, Sad1-staining patterns similarly changed from a dot to a crescent supporting an integral role in SPB function. Moderate overexpression of Sad1 led to association with the nuclear periphery. As Sad1 was not detected in the cytoplasmic microtubule-organizing centers activated at the end of anaphase or kinetochores, we suggest that Sad1 is not a general component of microtubule-interacting structures per se, but is an essential mitotic component that associates with the SPB but is not required for microtubule nucleation. Sad1 may play a role in SPB structure, such as maintaining a functional interface with the nuclear membrane or in providing an anchor for the attachment of microtubule motor proteins.

Fission yeast TPR-family protein nuc2 is required for G1-arrest upon nitrogen starvation and is an inhibitor of septum formation

Fission yeast nuc2+ gene encodes a protein of a tetratricopeptide repeat (TPR) family which is conserved throughout evolution. We previously showed that nuc2 is required for exit from the mitotic metaphase. In this study, we present evidence which shows that nuc2 has two additional roles in the cell cycle. We showed that the nuc2 mutant is sterile even at the permissive temperature and septation occurs in the absence of chromosome separation at the restrictive temperature. The nuc2 mutant fails to arrest at the G1 phase upon nitrogen starvation at the permissive temperature which is a prerequisite for conjugation. Upon starvation, however, the nuc2 mutant ceased division normally and induced starvation-dependent gene expression. Therefore, the nuc2 mutant is deficient only for failure to block DNA replication upon starvation. At the lower restrictive temperature, the nuc2 mutant showed a ‘cut’ phenotype where septation and cytokinesis takes place without the completion of mitosis. Ectopic overexpression of the nuc2+ gene caused multiple rounds of S and M phases in the complete absence of septum formation. We propose that nuc2 is a novel cell cycle regulator essential for three events; firstly for exit from mitosis, secondly for DNA replication restraint under nutrient starvation and thirdly for inhibition of septation and cytokinesis until the completion of mitosis.

Saccharomyces cerevisiae kinesin- and dynein-related proteins required for anaphase chromosome segregation

The Saccharomyces cerevisiae kinesin-related gene products Cin8p and Kip1p function to assemble the bipolar mitotic spindle. The cytoplasmic dynein heavy chain homologue Dyn1p (also known as Dhc1p) participates in proper cellular positioning of the spindle. In this study, the roles of these motor proteins in anaphase chromosome segregation were examined. While no single motor was essential, loss of function of all three completely halted anaphase chromatin separation. As combined motor activity was diminished by mutation, both the velocity and extent of chromatin movement were reduced, suggesting a direct role for all three motors in generating a chromosome-separating force. Redundancy for function between different types of microtubule-based motor proteins was also indicated by the observation that cin8 dyn1 double-deletion mutants are inviable. Our findings indicate that the bulk of anaphase chromosome segregation in S. cerevisiae is accomplished by the combined actions of these three motors.

The formation and functioning of yeast mitotic spindles

The mitotic spindle contains the machinery responsible for sister chromatid segregation. It is composed of a complex and dynamic array of microtubules, which are nucleated from the spindle poles. Studies of yeast spindle functions by molecular genetic analysis and by in vitro functional analysis have identified proteins that are mitosis-specific and present at very low concentrations in the cell, and have revealed the molecular bases of several processes required for the formation and functioning of the mitotic spindle. Here I review the current knowledge of the processes that are common to most eukaryotes: microtubule nucleation at the spindle poles, bipolar spindle assembly, maintenance of the spindle structure, chromosome attachment to the spindle and chromosome separation on the spindle.

Human gamma-tubulin functions in fission yeast

gamma-Tubulin is a phylogenetically conserved component of microtubule-organizing centers that is essential for viability and microtubule function. To examine the functional conservation of gamma-tubulin, we have tested the ability of human gamma-tubulin to function in the fission yeast Schizosaccharomyces pombe. We have found that expression of a human gamma-tubulin cDNA restores viability and a near-normal growth rate to cells of S. pombe lacking endogenous gamma-tubulin. Immunofluorescence microscopy showed that these cells contained normal mitotic spindles and interphase microtubule arrays, and that human gamma-tubulin, like S. pombe gamma-tubulin, localized to spindle pole bodies, the fungal microtubule-organizing centers. These results demonstrate that human gamma-tubulin functions in fission yeast, and they suggest that in spite of the great morphological differences between the microtubule-organizing centers of humans and fission yeasts, gamma-tubulin is likely to perform the same tasks in both. They suggest, moreover, that the proteins that interact with gamma-tubulin, including, most obviously, microtubule-organizing center proteins, must also be conserved. We have also found that a fivefold overexpression of S. pombe gamma-tubulin causes no reduction in growth rates or alteration of microtubule organization. We hypothesize that the excess gamma-tubulin is maintained in the cytoplasm in a form incapable of nucleating microtubule assembly. Finally, we have found that expression of human gamma-tubulin or overexpression of S. pombe gamma-tubulin causes no significant alteration of resistance to the antimicrotubule agents benomyl, thiabendazole and nocodazole.

Interpolar spindle microtubules in PTK cells

Spindle microtubules (MTs) in PtK1 cells, fixed at stages from metaphase to telophase, have been reconstructed using serial sections, electron microscopy, and computer image processing. We have studied the class of MTs that form an interdigitating system connecting the two spindle poles (interpolar MTs or ipMTs) and their relationship to the spindle MTs that attach to kinetochores (kMTs). Viewed in cross section, the ipMTs cluster with antiparallel near neighbors throughout mitosis; this bundling becomes much more pronounced as anaphase proceeds. While the minus ends of most kMTs are near the poles, those of the ipMTs are spread over half of the spindle length, with at least 50% lying > 1.5 microns from the poles. Longitudinal views of the ipMT bundles demonstrate a major rearrangement of their plus ends between mid- and late anaphase B. However, the minus ends of these MTs do not move appreciably farther from the spindle midplane, suggesting that sliding of these MTs contributes little to anaphase B. The minus ends of ipMTs are markedly clustered in the bundles of kMTs throughout anaphase A. These ends lie close to kMTs much more frequently than would be expected by chance, suggesting a specific interaction. As sister kinetochores separate and kMTs shorten, the minus ends of the kMTs remain associated with the spindle poles, but the minus ends of many ipMTs are released from the kMT bundles, allowing the spindle pole and the kMTs to move away from the ipMTs as the spindle elongates.

Mutations in the Drosophila melanogaster gene three rows permit aspects of mitosis to continue in the absence of chromatid segregation

We have cloned the three rows (thr) gene, by a combination of chromosome microdissection and P element tagging. We describe phenotypes of embryos homozygous for mutations at the thr locus. Maternal mRNA and protein appear to be sufficient to allow 14 rounds of mitosis in embryos homozygous for thr mutations. However, a small percentage of cells in syncytial blastoderm stage thr embryos sink into the interior of the embryo as if they have failed to divide properly. Following cellularisation all cells complete mitosis 14 normally. All cells become delayed at mitosis 15 with their chromosomes remaining aligned on the spindle in a metaphase-like configuration, even though both cyclins A and B have both been degraded. As cyclin B degradation occurs at the metaphase-anaphase transition, subsequent to the microtubule integrity checkpoint, the delay induced by mutations at the thr locus defines a later point in mitotic progression. Chromosomes in the cells of thr embryos do not undertake anaphase separation, but remain at the metaphase plate. Subsequently they decondense. A subset of nuclei go on to replicate their DNA but there is no further mitotic division.

Inhibition of anaphase spindle elongation in vitro by a peptide antibody that recognizes kinesin motor domain

Isolated central spindles or spindles in detergent-permeabilized cells from the diatom Cylindrotheca fusiformis can undergo ATP-dependent reactivation of spindle elongation in vitro. We have used a peptide antibody raised against a 10-amino acid portion common to the kinesin superfamily motor domain to look for kinesin-like motor activity during anaphase B of mitosis. The peptide antibody localizes to central spindles. Upon ATP reactivation of spindle elongation, antigens recognized by the antibody are associated exclusively with the central spindle midzone where antiparallel microtubules of each half-spindle overlap. The antibody recognizes several polypeptides by immunoblot using isolated spindle extracts. One of these polypeptides behaves like kinesin with respect to nucleotide-specific binding to and release from taxol-stabilized microtubules. Preincubation of the spindle model with the peptide antibody inhibits subsequent ATP reactivation of spindle elongation. Coincubation of the peptide antibody with peptide antigen rescues spindle function. These results support a role for kinesin-related protein(s) in spindle elongation (anaphase B) of mitosis and suggest that one or several polypeptides that we have identified in spindle extracts may fulfill this function.

BIMA, a TPR-containing protein required for mitosis, localizes to the spindle pole body in Aspergillus nidulans

The Aspergillus nidulans bimA gene is required for mitosis. Loss of function mutations in bimA cause cells to arrest growth with condensed chromatin and a short, metaphaselike mitotic spindle. bimA is a member of a gene family defined by a repeated motif called the Tetratrico Peptide Repeat (TPR), which is found in genes from bacteria, yeast and insects. Several yeast TPR genes are also required for mitosis, including Saccharomyces cerevisiae CDC27 and Schizosaccharomyces pombe nuc2+, which appear to be functional homologs of bimA. We have developed antisera specific to the bimA protein (BIMA) and have characterized BIMA by western blot and immunocytochemical analyses. BIMA is heterogeneous in apparent molecular weight, consisting of a major 90-kD species and at least two minor species of approximately 105 kD. The results of BIMA localization by immunofluorescence microscopy depend on the level of BIMA expression. Overexpression of BIMA, which had no deleterious affect on growth or mitosis, resulted in localization of BIMA on or throughout most nuclei. Nuclear staining was granular, and overlapped but was not completely coincident with DNA staining by DAPI. In contrast, when expressed at normal levels, BIMA colocalized with the spindle pole body (SPB). BIMA localized to the SPB in a cell cycle independent manner. These results show that BIMA is either associated with or is a component of the SPB, and they suggest that BIMA functions at the spindle poles to promote the onset of anaphase.

Microtubule nucleating activity of centrosomes in cell-free extracts from Xenopus eggs: involvement of phosphorylation and accumulation of pericentriolar material

We have studied the regulation of microtubule nucleating activity of the centrosome using cell-free extracts from Xenopus eggs. We found that the number of microtubules per centrosome increases dramatically with time during incubation of isolated centrosomes in interphasic egg extracts prepared 20–30 minutes after electric activation of cytostatic factor (CSF)-arrested eggs. The increase in microtubule nucleation was still conspicuous even when KCl-treated centrosomes (centrosomes stripped of their microtubule nucleating activity by 1 M KCl treatment) were incubated in interphasic extracts. Electron microscopy and immunostaining by anti-gamma-tubulin and 5051 human anti-centrosome antibodies revealed that pericentriolar material (PCM) was accumulated during the increase in microtubule nucleation from centrosomes in interphasic extracts, suggesting regulation of centrosomal activity by PCM accumulation. The ability of egg extracts to activate microtubule nucleation from centrosomes was also assumed to be regulated by phosphorylation, since addition of protein kinase inhibitors into interphasic extracts totally blocked the increase in microtubule nucleation from the KCl-treated centrosome. The ability of CSF-arrested mitotic extracts to increase microtubule nucleation from KCl-treated centrosomes was 3.5- to 5-fold higher than that of interphasic extracts, while PCM accumulation in mitotic extracts seemed to be similar to that in interphasic extracts. The increase in microtubule nucleation from KCl-treated centrosomes was strikingly enhanced by the addition of purified p34cdc2/cyclin B complex to interphasic extracts, but not by MAP kinase, which is activated downstream of p34cdc2/cyclin B. These results suggest two pathways activating centrosomal activity in egg extracts: accumulation of PCM and phosphorylation mediated by p34cdc2/cyclin B.

Three-dimensional reconstruction and analysis of mitotic spindles from the yeast, Schizosaccharomyces pombe

Mitotic spindles of Schizosaccharomyces pombe have been studied by EM, using serial cross sections to reconstruct 12 spindles from cells that were ultrarapidly frozen and fixed by freeze substitution. The resulting distributions of microtubules (MTs) have been analyzed by computer. Short spindles contain two kinds of MTs: continuous ones that run from pole to pole and MTs that originate at one pole and end in the body of the spindle. Among the latter there are three pairs of MT bundles that end on fibrous, darkly staining structures that we interpret as kinetochores. The number of MTs ending at each putative kinetochore ranges from two to four; all kinetochore-associated MTs disappear as the spindle elongates from 3-6 microns. At this and greater spindle lengths, there are no continuous MTs, only polar MTs that interdigitate at the spindle midzone, but the spindle continues to elongate. An analysis of the density of neighboring MTs at the midzone of long spindles shows that their most common spacing is approximately 40 nm, center to center, and that there is a preferred angular separation of 90 degrees. Only hints of such square-packing are found at the midzone of short spindles, and near the poles there is no apparent order at any mitotic stage. Our data suggest that the kinetochore MTs (KMTs) do not interact directly with nonkinetochore MTs, but that interdigitating MTs from the two spindle poles do interact to form a mechanically stable bundle that connects the poles. As the spindle elongates, the number of MTs decreases while the mean length of the MTs that remain increases. We conclude that the chromosomes of S. pombe become attached to the spindle by kinetochore MTs, that these MTs disappear as the chromosomes segregate, that increased separation of daughter nuclei is accompanied by a sliding apart of anti-parallel MTs, and that the mitotic processes of S. pombe are much like those in other eukaryotic cells.

Physiological evidence for involvement of a kinesin-related protein during anaphase spindle elongation in diatom central spindles

We have developed a new model system for studying spindle elongation in vitro using the pennate, marine diatom Cylindrotheca fusiformis. C. fusiformis can be grown in bulk to high densities while in log phase growth and synchronized by a simple light/dark regime. Isolated spindles can be attained in quantities sufficient for biochemical analysis and spindle tubulin is approximately 5% of the total protein present. The spindle isolation procedure results in a 10-fold enrichment of diatom tubulin and a calculated 40-fold increase in spindle protein. Isolated spindles or spindles in permeabilized cells can elongate in vitro by the same mechanism and with the same pharmacological sensitivities as described for other anaphase B models (Cande and McDonald, 1986; Masuda et al., 1990). Using this model, in vitro spindle elongation rate profiles were developed for a battery of nucleotide triphosphates and ATP analogs. The relative rates of spindle elongation produced by various nucleotide triphosphates parallel relative rates seen for kinesin-based motility in microtubule gliding assays. Likewise ATP analogs that allow discrimination between myosin-, dynein-, and kinesin-mediated motility produce relative spindle elongation rates characteristic of kinesin motility. Also, isolated spindle fractions are enriched for a kinesin related protein as identified by a peptide antibody against a conserved region of the kinesin superfamily. These data suggest that kinesin-like motility contributes to spindle elongation during anaphase B of mitosis.

Phosphorylation of a 225-kDa centrosomal component in mitotic CHO cells and sea urchin eggs

Components of centrosomes are those among cellular proteins that are phosphorylated at the transition from interphase to mitosis. Using an anti-phosphoprotein antibody (CHO3) directed against isolated mitotic CHO spindles, we identified a 225-kDa centrosomal phosphocomponent in mitotic CHO cells and in cleaving sea urchin eggs. The 225-kDa protein is tightly attached to the centrosome, which allowed us to separate it from other spindle-associated factors by high salt extraction. Phosphorylation of the 225-kDa protein occurred during mitosis. This was shown by isotope labeling on gels as well as by visualization of thiophosphorylated centrosomes with an anti-thiophosphoprotein antibody (M. Cyert, T. Scherson, and M. W. Kirschner, 1988, Dev. Biol. 129, 209) after preincubation with ATP-gamma-S in vivo and in vitro. Mitotic spindles isolated from CHO cells retained their ability to phosphorylate the centrosomal component, whereas sea urchin spindles did not, possibly due to loss or inactivation of protein kinase(s) during spindle isolation. The enzyme associated with isolated CHO spindles was extractable by high salt treatment and was capable of phosphorylating many spindle components, including the 225-kDa centrosomal protein of CHO cells and sea urchin embryos. Such high salt extracts contain protein kinases, including cell cycle control protein kinase p34cdc2, suggesting that the enzyme responsible for centrosomal phosphorylation could be p34cdc2 or other downstream mitotic kinases activated by the action of p34cdc2.

In vitro microtubule-nucleating activity of spindle pole bodies in fission yeast Schizosaccharomyces pombe: cell cycle-dependent activation in xenopus cell-free extracts

The spindle pole body (SPB) is the equivalent of the centrosome in fission yeast. In vivo it nucleates microtubules (MTs) during mitosis, but, unlike animal centrosomes, does not act as a microtubule organizing center (MTOC) during interphase. We have studied the MT-nucleating activity of SPBs in vitro and have found that SPBs in permeabilized cells retain in vivo characteristics. SPBs in cells permeabilized during mitosis can nucleate MTs, and are recognized by two antibodies: anti-gamma-tubulin and MPM-2 which recognizes phosphoepitopes. SPBs in cells permeabilized during interphase cannot nucleate MTs and are only recognized by anti-gamma-tubulin. Interphase SPBs which cannot nucleate can be converted to a nucleation competent state by incubation in cytostatic factor (CSF)-arrested Xenopus egg extracts. After incubation, they are recognized by MPM-2, and can nucleate MTs. The conversion does not occur in Xenopus interphase extract, but occurs in Xenopus interphase extract driven into mitosis by preincubation with exogenous cyclin B. The conversion is ATP dependent and inhibited by protein kinase inhibitors and alkaline phosphatase. Purified, active, cdc2 kinase/cyclin B complex in itself is not effective for activation of MT nucleation, although some interphase SPBs are now stained with MPM-2. These results suggest that the ability of SPBs in vitro to nucleate MTs after exposure to CSF-arrested extracts is activated through a downstream pathway which is regulated by cdc2 kinase.

Kinesin-related cut7 protein associates with mitotic and meiotic spindles in fission yeast

Several mitotic and meiotic gene products are related to the microtubule motor kinesin, providing insight into the molecular basis of the complex motile events responsible for spindle formation and function. Of these genes, three have been shown to affect spindle structure when mutated. The most severe phenotype is seen in Aspergillus nidulans bimC and Schizosaccharomyces pombe cut7 mutants. In both fungi the intranuclear spindle is bipolar, with microtubules that emanate from spindle pole bodies at either pole, interdigitating in a central overlap zone. In bimC and cut7 mutants, microtubule interdigitation does not appear to take place, instead two unconnected half spindles form and chromosome separation fails. Here we report that cut7 protein concentrates on or near the spindle pole bodies throughout mitotic and meiotic nuclear division and associates with mitotic spindle microtubules in a stage-specific manner, associating with the mid-anaphase B midzone. In cut7ts mutants, spindle pole bodies stain but mitotic microtubules do not.

The TPR snap helix: a novel protein repeat motif from mitosis to transcription

The recently discovered TPR gene family encodes a diverse group of proteins that function in mitosis, transcription, splicing, protein import and neurogenesis. These multi-domain proteins all contain tandemly arranged repeats of a 34-amino acid motif that are presumed to form helix-turn structures, each with a 'knob' and 'hole', acting as helix-associating domains.

Nucleotide specificity of the enzymatic and motile activities of dynein, kinesin, and heavy meromyosin

The substrate specificities of dynein, kinesin, and myosin substrate turnover activity and cytoskeletal filament-driven translocation were examined using 15 ATP analogues. The dyneins were more selective in their substrate utilization than bovine brain kinesin or muscle heavy meromyosin, and even different types of dyneins, such as 14S and 22S dynein from Tetrahymena cilia and the beta-heavy chain-containing particle from the outer-arm dynein of sea urchin flagella, could be distinguished by their substrate specificities. Although bovine brain kinesin and muscle heavy meromyosin both exhibited broad substrate specificities, kinesin-induced microtubule translocation varied over a 50-fold range in speed among the various substrates, whereas heavy meromyosin-induced actin translocation varied only by fourfold. With both kinesin and heavy meromyosin, the relative velocities of filament translocation did not correlate well with the relative filament-activated substrate turnover rates. Furthermore, some ATP analogues that did not support the filament translocation exhibited filament-activated substrate turnover rates. Filament-activated substrate turnover and power production, therefore, appear to become uncoupled with certain substrates. In conclusion, the substrate specificities and coupling to motility are distinct for different types of molecular motor proteins. Such nucleotide "fingerprints" of enzymatic activities of motor proteins may prove useful as a tool for identifying what type of motor is involved in powering a motility-related event that can be reconstituted in vitro.

Reactivation of isolated mitotic apparatus: metaphase versus anaphase spindles

Mitotic spindles isolated from sea urchin eggs can be reactivated to undergo mitotic processes in vitro. Spindles incubated in reactivation media containing sea urchin tubulin and nucleotides undergo pole-pole elongation similar to that observed in living cells during anaphase-B. The in vitro behavior of spindles isolated during metaphase and anaphase are compared. Both metaphase and anaphase spindles undergo pole-pole elongation with similar rates, but only in the presence of added tubulin. In contrast, metaphase but not anaphase spindles increase chromosome-pole distance in the presence of exogenous tubulin, suggesting that in vitro, tubulin can be incorporated at the kinetochores of metaphase but not anaphase chromosomes. The rate of spindle elongation, ultimate length achieved, and the increase in chromosome-pole distance for isolated metaphase spindles is related to the concentration of available tubulin. Pole-pole elongation and chromosome-pole elongation does not require added adenosine triphosphate (ATP). Guanosine triphosphate (GTP) will support all activities observed. Thus, the force generation mechanism for anaphase-B in isolated sea urchin spindles is independent of added ATP, but dependent on the availability of tubulin. These results support the hypothesis that the mechanism of force generation for anaphase-B is linked to the incorporation of tubulin into the mitotic apparatus. (If, in addition, a microtubule-dependent motor-protein(s) is acting to generate force, it does not appear to be dependent on ATP as the exclusive energy source.

Components of the yeast spindle and spindle pole body

Yeast spindle pole bodies (SPBs) with attached nuclear microtubles were enriched approximately 600-fold from yeast cell extracts. 14 mAbs prepared against this enriched SPB fraction define at least three components of the SPB and spindle. Immunofluorescent staining of yeast cells showed that throughout the cell cycle two of the components (110 and 90 kD) were localized exclusively to the SPB region, and the other (80 kD) was localized both to the SPB region and to particulate dots in short spindles. Immunoelectron microscopy confirmed and extended most of these findings. Thus the 110-kD component was localized to a layer in the SPB just to the nuclear side of the plane of the inner nuclear membrane. The 90-kD component was localized in a layer across the cytoplasmic face of intact SPBs, and, in SPBs where nuclear microtubules were removed by extraction with DEAE-dextran, the 90-kD component was also found in an inner nuclear layer close to where spindle microtubules emerge. In intact SPBs with attached nuclear microtubules the anit-80-kD mAb labels microtubules, particularly those close to the SPB. These results begin to provide a preliminary molecular map of the SPB and should also enable the corresponding genes to be isolated.