Graphene oxide-modified electrodes for sensitive determination of diethylstilbestrol

A facile one-pot synthesis of magnetic iron oxide nanoparticles embed N-doped graphene modified magnetic screen printed electrode for electrochemical sensing of chloramphenicol and diethylstilbestrol

Trace determination of antibacterial agents is crucial to minimize risks of human intoxication and in the prevention of serious environmental impacts. Herein, a simple one-pot solvothermal synthesis approach for a magnetic iron oxide embed nitrogen-doped graphene (MIO@NG) nanohybrid was fabricated without the addition of any extra reductant and its application towards ultrasensitive chloramphenicol (CAP) and diethylstilbestrol (DES) electrochemical sensor is demonstrated to screen for antibiotic residue contamination in milk samples. The prepared nanohybrid was modified on a magnetic screen-printed electrode (MSPE) to make it portable for on-site detection. The determination of two additive drugs, CAP and DES, was achieved based on the reduction current response at MIO@NG modified MSPE (MIO@NG/MSPE) to eliminate interference as far as possible. Uniform dispersed MIO nanoparticles are grown in situ on the surface of nitrogen-doped graphene sheets. The morphology of MIO@NG was confirmed by transmission electron microscopy (TEM) analysis. The chemical structure of the prepared MIO@NG was characterized by x-ray diffraction (XRD), x-ray photoemission spectroscopy (XPS), Raman spectroscopy, and extended x-ray absorption fine structure (EXAFS). Moreover, the superparamagnism property was investigated by vibrating sample magnetometry (VSM). The electrochemical properties of MIO@NG were evaluated with cyclic voltammetry (CV) and square wave voltammetry (SWV). Sensor performance was evaluated by testing the electrochemical activity of CAP and DES in the presence of interferences. The MIO@NG modified electrode presented superior electrochemical performance, including high sensitivity, high catalytic activity, ultimate sensitivity, very fast detection, selectivity, and excellent performance. The MIO@NG modified electrode demonstrated a detection limit of 10 nM for the detection of CAP and 6.5 nM for DES with satisfactory recovery in real samples.

Simultaneous detection of diethylstilbestrol and estradiol residues with a single immunochromatographic assay strip

An immunochromatographic assay (ICA) based on competitive format was developed and validated for simultaneously rapid and sensitive detection of diethylstilbestrol (DES) and estradiol (E2) in milk and tissue samples. For this purpose, two monoclonal antibodies raised against those two estrogens were conjugated to gold nanoparticles and were applied to the conjugate pads of the test strip. The competitors of the DES-BSA/E2-BSA conjugates were immobilized onto a nitrocellulose membrane at two detection zones to form T1 and T2, respectively. The immunochromatographic assay had a visual detection limit of DES at 30 ng/g in milk powder, 25 ng/g in liquid milk, and 25 ng/g in shrimp tissue, respectively, and the results can be judged within 7-10 min. The visual detection limit of E2 was 75 ng/g in milk powder, 65 ng/g in liquid milk, and 60 ng/g in shrimp tissue, respectively, and the results can be judged within 3-4 min. It had advantages in easy operation without requiring sophisticated equipment and specialized skills. By testing thirty milk and shrimp tissue samples from the local market, the method was compared with the HPLC-MS / MS method, and there was no statistical difference between the two methods. Furthermore, the immunochromatographic assay had good specificity, simple procedure, and low cost. This protocol was well suited for the food safety monitoring and early warning.

Graphene oxide quantum dots immobilized on mesoporous silica: preparation, characterization and electroanalytical application

Because of its high surface area and combination of various functional groups, graphene oxide (GO) is currently one of the most actively studied materials for electroanalytical applications. It is not practical to utilize self-supported GO on its own and thus it is commonly integrated with different supporting carriers. Having a large lateral size, GO can only wrap the particles of the support and thus can significantly reduce the surface area of porous materials. To achieve synergy from the high surface area and polyfunctional nature of GO, and the rigid structure of a porous support, the lateral size of GO must essentially be decreased. Recently reported graphene oxide quantum dots (GOQDs) can fulfil this task. Here we report the successful preparation of an SiO₂-GOQDs hybrid, where GOQDs have been incorporated into the mesoporous network of silica. The SiO₂-GOQDs emit a strong luminescence with a band maximum at 404 nm. The Raman spectrum of SiO₂-GOQDs shows two distinct peaks at 1585 cm⁻¹ (G-peak) and 1372 cm⁻¹ (D-peak), indicating the presence of a graphene ordered basal plane with aromatic sp²-domains and a disordered oxygen-containing structure. Covalent immobilization of GOQDs onto aminosilica via such randomly structured oxygen fragments was proven with the help of Fourier transform infrared spectroscopy, solid-state cross-polarization magic angle spinning ¹³C nuclear magnetic resonance, and X-ray photoelectron spectroscopy. SiO₂-GOQDs were used as a modifier of a carbon paste electrode for differential pulse voltammetry determination of two antibiotics (sulfamethoxazole and trimethoprim) and two endocrine disruptors (diethylstilbestrol (DES) and estriol (EST)). The modified electrodes demonstrated a significant signal enhancement for EST (370%) and DES (760%), which was explained by a π–π stacking interaction between GOQDs and the aromatic system of the analytes.

Graphene oxide quantum dots incorporated into a mesoporous silica network have been used as a modifier of a carbon paste electrode for the determination of antibiotics and hormones.

Hapten Synthesis and the Development of an Ultrasensitive Indirect Competitive ELISA for the Determination of Diethylstilbestrol in Food Samples

An ultrasensitive indirect competitive enzyme-linked immunosorbent assay (ic ELISA) using monoclonal antibodies (mAbs) was developed for the specific detection of diethylstilbestrol (DES) residues. To establish an ELISA based on mAbs, hapten diethylstilbestrol mono-carboxypropyl-ether (DES-MCPE) was chemically synthetized and then conjugated to bovine serum albumin (BSA) for immunization in mice. This ic ELISA was further optimized for DES determination. The sensitivity of the ic ELISA was found to be 0.49 μg/kg and the limit of detection was 0.075 μg/kg. DES residues in salmon meat and pork were tested with the recovery range from 74.0 to 85.2% and the coefficient of variation (CV) was less than 10%. Parallel analysis of DES samples from salmon meat showed comparable results from the ic ELISA with high-performance liquid chromatography. The ic ELISA provides a useful screening method for the quantitative detection of DES residues in animal-derived food.

Organic-Inorganic Nanohybrid Electrochemical Sensors from Multi-Walled Carbon Nanotubes Decorated with Zinc Oxide Nanoparticles and In-Situ Wrapped with Poly(2-methacryloyloxyethyl ferrocenecarboxylate) for Detection of the Content of Food Additives

An electrochemical sensor for detection of the content of aspartame was developed by modifying a glassy carbon electrode (GCE) with multi-walled carbon nanotubes decorated with zinc oxide nanoparticles and in-situ wrapped with poly(2-methacryloyloxyethyl ferrocenecarboxylate) (MWCNTs@ZnO/PMAEFc). MWCNTs@ZnO/PMAEFc nanohybrids were prepared through reaction of zinc acetate dihydrate with LiOH·H2O, followed by reversible addition-fragmentation chain transfer polymerization of 2-methacryloyloxyethyl ferrocenecarboxylate, and were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), Raman, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), scanning electron microscope (SEM), and transmission electron microscope (TEM) techniques. The electrochemical properties of the prepared nanohybrids with various composition ratios were examined by cyclic voltammetry (CV), and the trace additives in food and/or beverage was detected by using differential pulse voltammetry (DPV). The experimental results indicated that the prepared nanohybrids for fabrication of electrochemical modified electrodes possess active electroresponse, marked redox current, and good electrochemical reversibility, which could be mediated by changing the system formulations. The nanohybrid modified electrode sensors had a good peak current linear dependence on the analyte concentration with a wide detection range and a limit of detection as low as about 1.35 × 10-9 mol L-1, and the amount of aspartame was measured to be 35.36 and 40.20 µM in Coke zero, and Sprite zero, respectively. Therefore, the developed nanohybrids can potentially be used to fabricate novel electrochemical sensors for applications in the detection of beverage and food safety.

High-performance voltammetric sensor for dichlorophenol based on β-cyclodextrin functionalized boron-doped graphene composite aerogels

2, 2-methylenebis (4-chlorophenol) (dichlorophenol, Dcp) is a priority pollutant that poses a serious health threat to the public. Thus, the sensitive analysis of Dcp is of great significance. Heteroatom-doped carbon nanomaterials modified electrodes have been proven to be good electrocatalysts for electrochemical sensing application. β-cyclodextrin (β-CD) as a signal amplifier has also been utilized in biosensors. Inspired by these, in this study, a new composite of β-CD and three-dimensional (3D) boron-doped graphene aerogels (BGAs/β-CD) has been designed as a high-performance electrochemical sensing platform for Dcp determination. Graphene aerogels possess high specific surface area, large pore volume and good conductivity, which ensure rapid mass transfer and accelerated electron transfer. Besides, boron doping causes uneven charge distribution on the graphene lattice surface, producing a large amount of flowing π electrons, which provide abundant active sites for the catalytic oxidation reaction of Dcp. In addition, Dcp molecules could be captured into β-CD through host-guest recognition, which can effectively amplify the detection signal. Combining the merits of BGAs and β-CD, the BGAs/β-CD based sensor achieved sensitive detection of Dcp. Under optimized experimental conditions, the oxidation currents and the concentration of Dcp had a good linear relationship within 1.0 nM ∼ 21 μM. The detection limit was estimated as 0.33 nM (S/N = 3). This study might provide a new basis for the fabrication of 3D BG-based aerogel architectural material and its application in Dcp detection.

Amino acid functionalized ZrO2 nanoparticles decorated reduced graphene oxide based immunosensor

Here, a study is reported on a simple, one-step method for the synthesis of a zirconium dioxide–reduced graphene oxide (ZrO₂–RGO) nanocomposite and its functionalization with amino acid to develop an immunosensor for detection of ochratoxin A.

Electrochemical determination of trace pesticide residues based on multiwalled carbon nanotube grafted acryloyloxy ferrocene carboxylates with different spacers

We report the preparation of nanohybrid composites with good electrochemical response for the detection of pesticide residues by combining esterification with ATRP.

Graphene oxide chemically decorated with Ag–Ru/chitosan nanoparticles: fabrication, electrode processing and immunosensing properties

Graphene oxide hybridized with ternary nanocomposites (Ag–Ru/chitosan) were prepared and demonstrated as an immunosensor platform for detecting pathogenic bacteria.

Graphene oxide/α-Bi(2)O(3) composites for visible-light photocatalysis, chemical catalysis, and solar energy conversion

The growing challenges of environmental purification by solar photocatalysis, precious-metal-free catalysis, and photocurrent generation in photovoltaic cells receive the utmost global attention. Here we demonstrate a one-pot, green chemical synthesis of a new stable heterostructured, ecofriendly, multifunctional microcomposite that consists of α-Bi2 O3 microneedles intercalated with anchored graphene oxide (GO) microsheets (1.0 wt %) for the above-mentioned applications on a large economical scale. The bare α-Bi2 O3 microneedles display two times better photocatalytic activities than commercial TiO2 (Degussa-P25), whereas the GO-hybridized composite exhibits approximately four to six times enhanced photocatalytic activities than the neat TiO2 photocatalyst in the degradation of colored aromatic organic dyes (crystal violet and rhodamine 6G) under visible-light irradiation (300 W tungsten lamp). The highly efficient activity is associated with the strong surface adsorption ability of GO for aromatic dye molecules, the high carrier acceptability, and the efficient electron-hole pair separation in Bi2 O3 by individual adjoining GO sheets. The introduction of Ag nanoparticles (2.0 wt %) further enhances the photocatalytic performance of the composite over eightfold because of a plasmon-induced electron-transfer process from Ag nanoparticles through the GO sheets into the conduction band of Bi2 O3 . The new composites are also catalytically active and catalyze the reduction of 4-nitrophenol to 4-aminophenol in the presence of borohydride ions. Photoanodes assembled from GO/α-Bi2 O3 and Ag/GO/α-Bi2 O3 composites display an improved photocurrent response (power conversion efficiency ∼20 % higher) over those prepared without GO in dye-sensitized solar cells.