Alternative low-cost approach to the synthesis of magnetic iron oxide nanoparticles by thermal decomposition of organic precursors

Effect of Polymer and Cell Membrane Coatings on Theranostic Applications of Nanoparticles: A Review

The recent decade has witnessed a remarkable surge in the field of nanoparticles, from their synthesis, characterization, and functionalization to diverse applications. At the nanoscale, these particles exhibit distinct physicochemical properties compared to their bulk counterparts, enabling a multitude of applications spanning energy, catalysis, environmental remediation, biomedicine, and beyond. This review focuses on specific nanoparticle categories, including magnetic, gold, silver, and quantum dots (QDs), as well as hybrid variants, specifically tailored for biomedical applications. A comprehensive review and comparison of prevalent chemical, physical, and biological synthesis methods are presented. To enhance biocompatibility and colloidal stability, and facilitate surface modification and cargo/agent loading, nanoparticle surfaces are coated with different synthetic polymers and very recently, cell membrane coatings. The utilization of polymer- or cell membrane-coated nanoparticles opens a wide variety of biomedical applications such as magnetic resonance imaging (MRI), hyperthermia, photothermia, sample enrichment, bioassays, drug delivery, etc. With this review, the goal is to provide a comprehensive toolbox of insights into polymer or cell membrane-coated nanoparticles and their biomedical applications, while also addressing the challenges involved in translating such nanoparticles from laboratory benchtops to in vitro and in vivo applications. Furthermore, perspectives on future trends and developments in this rapidly evolving domain are provided.

Physicochemical and thermal characterization of the edible shellac films incorporated with oleic acid to enhance flexibility, water barrier and retard aging

In this work, shellac plasticized with oleic acid was solvent cast to prepare the flexible and water-resistant film for packaging applications. The films were prepared with varying amounts of oleic acid and studied in detail for appearance, surface morphology, thermal, chemical, barrier, mechanical, and robustness. The surface morphology confirmed the smooth surface of films up to SH-OA20 (100:20 w/w; shellac: oleic acid). Fourier-transform infrared spectroscopy confirmed that oleic acid reduced the hydrogen bonding of the shellac matrix to provide a plasticization effect. Also, the thermal analysis showed a reduction in the melting enthalpy. Moreover, the plasticized films had a better barrier to water vapor due to increased smoothness and reduction in brittleness. Adding oleic acid also increased the elongation at break up to 40 % without any changes in tensile strength. The flexibility of the films increased with the oleic acid content, making them resistant to burst, crumbling, bending, rolling, and stretching. Oleic acid also showed the retardation of aging and thermal aging of shellac. In the future, the long-term stability and migration of the films can be investigated.

Colloidal Synthesis of P-Type Zn3As2 Nanocrystals

Zinc pnictides, particularly Zn3As2, hold significant promise for optoelectronic applications owing to their intrinsic p-type behavior and appropriate bandgaps. However, despite the outstanding properties of colloidal Zn3As2 nanocrystals, research in this area is lacking because of the absence of suitable precursors, occurrence of surface oxidation, and intricacy of the crystal structures. In this study, a novel and facile solution-based synthetic approach is presented for obtaining highly crystalline p-type Zn3As2 nanocrystals with accurate stoichiometry. By carefully controlling the feed ratio and reaction temperature, colloidal Zn3As2 nanocrystals are successfully obtained. Moreover, the mechanism underlying the conversion of As precursors in the initial phases of Zn3As2 synthesis is elucidated. Furthermore, these nanocrystals are employed as active layers in field-effect transistors that exhibit inherent p-type characteristics with native surface ligands. To enhance the charge transport properties, a dual passivation strategy is introduced via phase-transfer ligand exchange, leading to enhanced hole mobilities as high as 0.089 cm2 V-1 s-1. This study not only contributes to the advancement of nanocrystal synthesis, but also opens up new possibilities for previously underexplored p-type nanocrystal research.

Magnetic Nanoparticles: A Review on Synthesis, Characterization, Functionalization, and Biomedical Applications

Nowadays, magnetic nanoparticles (MNPs) are applied in numerous fields, especially in biomedical applications. Since biofluidic samples and biological tissues are nonmagnetic, negligible background signals can interfere with the magnetic signals from MNPs in magnetic biosensing and imaging applications. In addition, the MNPs can be remotely controlled by magnetic fields, which make it possible for magnetic separation and targeted drug delivery. Furthermore, due to the unique dynamic magnetizations of MNPs when subjected to alternating magnetic fields, MNPs are also proposed as a key tool in cancer treatment, an example is magnetic hyperthermia therapy. Due to their distinct surface chemistry, good biocompatibility, and inducible magnetic moments, the material and morphological structure design of MNPs has attracted enormous interest from a variety of scientific domains. Herein, a thorough review of the chemical synthesis strategies of MNPs, the methodologies to modify the MNPs surface for better biocompatibility, the physicochemical characterization techniques for MNPs, as well as some representative applications of MNPs in disease diagnosis and treatment are provided. Further portions of the review go into the diagnostic and therapeutic uses of composite MNPs with core/shell structures as well as a deeper analysis of MNP properties to learn about potential biomedical applications.

Stable and luminescent cesium copper halide nanocrystals embedded in flexible polymer fibers for fabrication of down-converting WLEDs

Recently, CsPbX3 (X = I, Br, Cl) perovskite nanocrystals (NCs) have drawn wide attention owing to their outstanding photophysical and optoelectronic properties. However, the toxicity of such NCs remained a big challenge for further commercialization. Herein, we adopt facile methods for synthesizing green-emissive Cs3Cu2Cl5 and blue-emissive Cs3Cu2Br2.5I2.5 perovskite NCs that exhibit broad emission spectra with large Stokes shifts. These NCs showed photoluminescence quantum yields (PLQY) up to 65% (Cs3Cu2Cl5 NCs) and 32% (Cs3Cu2Br2.5I2.5 NCs) with limited stabilities. To further improve the stability, the NCs were blended with a hydrophobic polymer poly-methylmethacrylate (PMMA) and embedded inside the polymer fiber by an electrospinning process to form composite fibers. The as-prepared Cs3Cu2Cl5@PMMA and Cs3Cu2Br2.5I2.5@PMMA fiber films demonstrated good surface coverage and better thermal stability, and even retained their emission properties when dispersed in water. The emissive fibers were also deposited on flexible polyethylene terephthalate (PET) substrates that displayed high resistance towards bending and twisting with no signs of breakage, damage, or loss of optical properties. Finally, UV-pumped phosphor-converted WLEDs fabricated by using these blue and green-emitting fibers revealed CIE chromaticity coordinates at (0.27, 0.33) with a maximum luminous efficiency of 69 Lm W-1 and correlated color temperature (CCT) value of 8703 K. These outcomes can be beneficial for the development of futuristic flexible display technologies.

Solvent Effects in Ligand Stripping Behavior of Colloidal Nanoparticles

Inorganic colloidal nanoparticle (NP) properties can be tuned by stripping stabilizing ligands using a poor solvent. However, the mechanism behind ligand stripping is poorly understood, in part because in situ measurements of ligand stripping are challenging at the nanoscale. Here, we investigate ethanol solvent-mediated oleylamine ligand stripping from magnetite (Fe₃O₄) NPs in different compositions of ethanol/hexane mixtures using atomistic molecular dynamics (MD) simulations and thermogravimetric analysis (TGA). Our study elucidates a complex interplay of ethanol interactions with system components and indicates the existence of a threshold concentration of ∼34 vol % ethanol, above which ligand stripping saturates. Moreover, hydrogen bonding between ethanol and stripped ligands inhibits subsequent readsorption of the ligands on the NP surface. A proposed modification of the Langmuir isotherm explains the role of the enthalpy of mixing of the ligands and solvents on the ligand stripping mechanism. A good agreement between the MD predictions and TGA measurements of ligand stripping from Fe₃O₄ NPs validates the simulation observations. Our findings demonstrate that the ligand coverage of NPs can be controlled by using a poor solvent below the threshold concentration and highlight the importance of ligand-solvent interactions that modulate the properties of colloidal NPs. The study also provides an approach for a detailed in silico study of ligand stripping and exchange from colloidal NPs that are crucial for applications of NPs spanning self-assembly, optoelectronics, nanomedicine, and catalysis.

Iron-Based Magnetic Nanosystems for Diagnostic Imaging and Drug Delivery: Towards Transformative Biomedical Applications

The advancement of biomedicine in a socioeconomically sustainable manner while achieving efficient patient-care is imperative to the health and well-being of society. Magnetic systems consisting of iron based nanosized components have gained prominence among researchers in a multitude of biomedical applications. This review focuses on recent trends in the areas of diagnostic imaging and drug delivery that have benefited from iron-incorporated nanosystems, especially in cancer treatment, diagnosis and wound care applications. Discussion on imaging will emphasise on developments in MRI technology and hyperthermia based diagnosis, while advanced material synthesis and targeted, triggered transport will be the focus for drug delivery. Insights onto the challenges in transforming these technologies into day-to-day applications will also be explored with perceptions onto potential for patient-centred healthcare.

Oleic acid/oleylamine ligand pair: a versatile combination in the synthesis of colloidal nanoparticles

A variety of colloidal chemical approaches has been developed in the last few decades for the controlled synthesis of nanostructured materials in either water or organic solvents. Besides the precursors, the solvents, reducing agents, and the choice of surfactants are crucial for tuning the composition, morphology and other properties of the resulting nanoparticles. The ligands employed include thiols, amines, carboxylic acids, phosphines and phosphine oxides. Generally, adding a single ligand to the reaction mixture is not always adequate to yield the desired features. In this review, we discuss in detail the role of the oleic acid/oleylamine ligand pair in the chemical synthesis of nanoparticles. The combined use of these ligands belonging to two different categories of molecules aims to control the size and shape of nanoparticles and prevent their aggregation, not only during their synthesis but also after their dispersion in a carrier solvent. We show how the different binding strengths of these two molecules and their distinct binding modes on specific facets affect the reaction kinetics toward the production of nanostructures with tailored characteristics. Additional functions, such as the reducing function, are also noted, especially for oleylamine. Sometimes, the carboxylic acid will react with the alkylamine to form an acid-base complex, which may serve as a binary capping agent and reductant; however, its reducing capacity may range from lower to much lower than that of oleylamine. The types of nanoparticles synthesized in the simultaneous presence of oleic acid and oleylamine and discussed herein include metal oxides, metal chalcogenides, metals, bimetallic structures, perovskites, upconversion particles and rare earth-based materials. Diverse morphologies, ranging from spherical nanoparticles to anisotropic, core-shell and hetero-structured configurations are presented. Finally, the relation between tuning the resulting surface and volume nanoparticle properties and the relevant applications is highlighted.

From Low to High Saturation Magnetization in Magnetite Nanoparticles: The Crucial Role of the Molar Ratios Between the Chemicals

In this study, a comprehensive characterization of iron oxide nanoparticles synthesized by using a simple one-pot thermal decomposition route is presented. In order to obtain monodisperse magnetite nanoparticles with high saturation magnetization, close to the bulk material, the molar ratios between the starting materials (solvents, reducing agents, and surfactants) were varied. Two out of nine conditions investigated in this study resulted in monodisperse iron oxide nanoparticles with high saturation magnetization (90 and 93% of bulk magnetite). The X-ray diffraction analyses along with the inspection of the lattice structure through transmission electron micrographs revealed that the main cause of the reduced magnetization in the other seven samples is likely due to the presence of distortion and microstrain in the particles. Although the thermogravimetric analysis, Raman and Fourier transform infrared spectroscopies confirmed the presence of covalently bonded oleic acid on the surface of all the samples, the particles with higher polydispersity and the lowest surface coating molecules showed the lowest saturation magnetization. Based on the observed results, it could be speculated that the changes in the kinetics of the reactions, induced by varying the molar ratio of the starting chemicals, can lead to the production of the particles with higher polydispersity and/or lattice deformation in their crystal structures. Finally, it was concluded that the experimental conditions for obtaining high-quality iron oxide nanoparticles, particularly the molar ratios and the heating profile, should not be chosen independently; for any specific molar ratio, there may exist a specific heating profile or vice versa. Because this synthetic consideration has rarely been reported in the literature, our results can give insights into the design of iron oxide nanoparticles with high saturation magnetization for different applications.

Impact of Bifunctional Ligands on Charge Transfer Kinetics in CsPbBr3-CdSe/CdS/ZnS Nanohybrids

Mixed dimensional nanohybrids (MDNHs) between zero-dimensional (0D) perovskites and two-dimensional (2D) II-VI semiconductors hold great potential for photonic device applications. An in-depth study to understand the shuttling of charge carriers is carried out utilizing bifunctional ligands such as 4-aminothiophenol (4-ATP), p-aminobenzoic acid, and 6-amino-2-naphthoic acid in the synthesis of MDNHs of CsPbBr₃ nanocrystals (NCs) and CdSe/CdS/ZnS core/shell/shell (CSS) nanoplatelets (NPLs). These MDNHs form donor-bridge-acceptor systems, where the electronic interaction is greatly influenced by the nature of ligands. The smaller size and stronger binding affinity of 4-ATP to CSS NPLs lead to a faster rate of charge transfer as compared to other linkers. Electronic structure calculations under the framework of density functional theory (DFT) confirms that in 4-ATP capped CSS NPLs, stronger electronic overlap occurs between CSS NPLs and 4-ATP at the valence band maxima (VBM). Furthermore, Poisson distribution modeling proposes that in 4-ATP linked MDNHs, the number of CSS NPLs around CsPbBr₃ NCs is highest.

PEGylation of Metal Oxide Nanoparticles Modulates Neutrophil Extracellular Trap Formation

Novel metal oxide nanoparticle (NP) contrast agents may offer safety and functionality advantages over conventional gadolinium-based contrast agents (GBCAs) for cancer diagnosis by magnetic resonance imaging. However, little is known about the behavior of metal oxide NPs, or of their effect, upon coming into contact with the innate immune system. As neutrophils are the body's first line of defense, we sought to understand how manganese oxide and iron oxide NPs impact leukocyte functionality. Specifically, we evaluated whether contrast agents caused neutrophils to release web-like fibers of DNA known as neutrophil extracellular traps (NETs), which are known to enhance metastasis and thrombosis in cancer patients. Murine neutrophils were treated with GBCA, bare manganese oxide or iron oxide NPs, or poly(lactic-co-glycolic acid) (PLGA)-coated metal oxide NPs with different incorporated levels of poly(ethylene glycol) (PEG). Manganese oxide NPs elicited the highest NETosis rates and had enhanced neutrophil uptake properties compared to iron oxide NPs. Interestingly, NPs with low levels of PEGylation produced more NETs than those with higher PEGylation. Despite generating a low rate of NETosis, GBCA altered neutrophil cytokine expression more than NP treatments. This study is the first to investigate whether manganese oxide NPs and GBCAs modulate NETosis and reveals that contrast agents may have unintended off-target effects which warrant further investigation.

Stable Pd-Cu Hydride Catalyst for Efficient Hydrogen Evolution

Pd has been regarded as one of the alternatives to Pt as a promising hydrogen evolution reaction (HER) catalyst. Strategies including Pd-metal alloys (Pd-M) and Pd hydrides (PdH_x) have been proposed to boost HER performances. However, the stability issues, e.g., the dissolution in Pd-M and the hydrogen releasing in PdH_x, restrict the industrial application of Pd-based HER catalysts. We here design and synthesize a stable Pd-Cu hydride (PdCu_0.2H_0.43) catalyst, combining the advantages of both Pd-M and PdH_x structures and improving the HER durability simultaneously. The hydrogen intercalation is realized under atmospheric pressure (1.0 atm) following our synthetic approach that imparts high stability to the Pd-Cu hydride structure. The obtained PdCu_0.2H_0.43 catalyst exhibits a small overpotential of 28 mV at 10 mA/cm², a low Tafel slope of 23 mV/dec, and excellent HER durability due to its appropriate hydrogen adsorption free energy and alleviated metal dissolution rate.

Significant Surface Spin Effects and Exchange Bias in Iron Oxide-Based Hollow Magnetic Nanoparticles

Exchange bias (EB) properties have become especially important in hollow magnetic nanoparticles (MNPs) due to the versatility and reduced size of these materials. In this work, we present the synthesis and study of the EB properties of iron-oxide-based hollow MNPs and their precursors Fe/iron oxide MNPs with core/void/shell structure. The two mechanisms involved in EB generation were investigated: the frozen spins present in the nanograins that form the nanoparticles and the surface spins. The effect of external parameters on the coercivity (H_C), remanence (M_R), exchange bias field (H_EB) and frozen spins, such as cooling field (H_FC) and temperature, was investigated. Both H_C and H_EB present a maximum threshold above which their values begin to decrease with H_FC, showing a new trend of H_EB with H_FC and allowing modulation on demand. The existence of surface spins, present on the outer and inner surfaces, was demonstrated, and an intrinsic EB phenomenon (H_EB = 444 Oe for hollow iron oxide-based MNPs of 13.1 nm) with significant magnetization (M_S~50 emu/g) was obtained. Finally, core/void/shell MNPs of 11.9 nm prior to the formation of the hollow MNPs showed a similar behavior, with non-negligible H_EB, highlighting the importance of surface spins in EB generation.

Donor–acceptor organic nanostructure based on conjugated polymer for improving visible-light-driven photocatalytic activity towards degradation of dye in aqueous medium

Hybrid donor–acceptor nanostructures based on P3HT with improved light harvesting properties were employed for organic dye degradation.

Localized surface plasmon-enhanced blue electroluminescent device based on ZnSeTe quantum dots and AuAg nanoparticles

Localized surface plasmon resonance-enhanced Cd-free blue electroluminescent devices integrated with ZnSeTe quantum dots and AuAg alloy nanoparticles were demonstrated.

Direct Optical Lithography of CsPbX3 Nanocrystals via Photoinduced Ligand Cleavage with Postpatterning Chemical Modification and Electronic Coupling

Microscale patterning of solution-processed nanomaterials is important for integration in functional devices. Colloidal lead halide perovskite (LHP) nanocrystals (NCs) can be particularly challenging to pattern due to their incompatibility with polar solvents and lability of surface ligands. Here, we introduce a direct photopatterning approach for LHP NCs through the binding and subsequent cleavage of a photosensitive oxime sulfonate ester (-C═N-OSOO-). The photosensitizer binds to the NCs through its sulfonate group and is cleaved at the N-O bond during photoirradiation with 405 nm light. This bond cleavage decreases the solubility of the NCs, which allows patterns to emerge upon development with toluene. Postpatterning ligand exchange results in photoluminescence quantum yields of up to 79%, while anion exchange provides tunability in the emission wavelength. The patterned NC films show photoconductive behavior, demonstrating that good electrical contact between the NCs can be established.

Quasi-2D Halide Perovskite Memory Device Formed by Acid-Base Binary Ligand Solution Composed of Oleylamine and Oleic Acid

Organometal halide perovskite materials are receiving significant attention for the fabrication of resistive-switching memory devices based on their high stability, low power consumption, rapid switching, and high ON/OFF ratios. In this study, we synthesized 3D FAPbBr₃ and quasi-2D (RNH₃)₂(FA)₁Pb₂Br₇ films using an acid-base binary ligand solution composed of oleylamine (OlAm) and oleic acid in toluene. The quasi-2D (RNH₃)₂(FA)₁Pb₂Br₇ films were synthesized by controlling the protonated OlAm (RNH₃⁺) solution concentration to replace FA⁺ cations with large organic RNH₃⁺ cations from 3D FAPbBr₃ perovskites. The quasi-2D (RNH₃)₂(FA)₁Pb₂Br₇ devices exhibited nonvolatile write-once read-many (WORM) memory characteristics, whereas the 3D FAPbBr₃ only exhibited hysteresis behavior. Analysis of the 3D FAPbBr₃ device indicated operation in the trap-limited space-charge-limited current region. In contrast, quasi-2D (RNH₃)₂(FA)₁Pb₂Br₇ devices provide low trap density that is completely filled by injected charge carriers and then subsequently form conductive filaments (CFs) to operate as WORM devices. Nanoscale morphology analysis and an associated current mapping study based on conductive atomic force microscopy measurements revealed that perovskite grain boundaries serve as major channels for high current, which may be correlated with the conductive low-resistive-switching behavior and formation of CFs in WORM devices.

Selectivity in the Ligand Functionalization of Photocatalytic Metal Oxide Nanoparticles for Phase Transfer and Self-Assembly Applications

The functionalization of photocatalytic metal oxide nanoparticles of TiO₂ , ZnO, WO₃ and CuO with amine-terminated (oleylamine) and thiol-terminated (dodecane-1-thiol) alkyl-chain ligands was studied under ambient conditions. A high selectivity was observed in the binding specificity of a ligand towards nanoparticles of these different oxides. It was observed that oleylamine binds stably to only TiO₂ and WO₃ , whereas dodecane-1-thiol binds stably only to ZnO and CuO. Similarly, polar-to-nonpolar solvent phase transfer of TiO₂ and WO₃ nanoparticles could be achieved by using oleylamine, but not dodecane-1-thiol, whereas the opposite holds for ZnO and CuO. The surface chemistry of ligand-functionalized nanoparticles was probed by attenuated total reflectance (ATR)-FTIR spectroscopy, which enabled the occupation of the ligands at the active sites to be elucidated. The photostability of the ligands on the nanoparticle surface was determined by the photocatalytic self-cleaning properties of the material. Although TiO₂ and WO₃ degrade the ligands within 24 h under both UV and visible light, ligands on ZnO and CuO remain unaffected. The gathered insights are also highly relevant from an application point of view. As an example, because the ligand-functionalized nanoparticles are hydrophobic in nature, they can be self-assembled at the air-water interface to give nanoparticle films with demonstrated photocatalytic as well as anti-fogging properties.

Low-cost nanoparticulate oxidation catalysts for the removal of azo and anthraquinic dyes

PURPOSE

This study aimed to test the activity of Mn ferrite, hematin-Mn ferrite and colloidal maghemite in decomposition of Orange II (O-II) and Alizarin Red S (ARS) in model aqueous solutions.

METHODS

Color removal was explored at room temperature using magnetic stirring with and without a magnetic bar, taking advantage of the solids' magnetism. Decomposition of H₂O₂ was also studied separately and as radicals provider in dye decomposition. Catalyst/dye solution was fixed at 10 mg/4 mL. pH and dye concentration were variable. Absorbance was measured during 120 min by UV-Vis. Reuse of catalysts was also performed.

RESULTS

Azo dyes such as O-II are more resistant to oxidative removal using hydrogen peroxide than anthraquinone-like ARS. CITMD5 reduced ARS absorbance up to 71.9% when dye was less than 250 mg/L. HEM-Mn-MAG completely decolorized a 62.5 mg/L O-II solution at pH 11 while CITMD5 reached half of that conversion under the same conditions. The highest color removal in O-II/ARS mixtures was obtained with HEM-Mn-MAG, 40% absorbance reduction in 2 h. Mn-MAG is not active to remove O-II in presence of hydrogen peroxide in the 3-9 pH range at rt.

CONCLUSIONS

The high activity of Mn-MAG in hydrogen peroxide decomposition may be assigned to the combination of Mn⁺²/Mn⁺³ and Fe⁺²/Fe⁺³, because the MnO_x is active in the decomposition of hydrogen peroxide. Mn-MAG can be reused, preserving high activity in this reaction. Mn-based magnetic nanoparticles should be considered as inexpensive materials to treat textile wastewaters.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s40201-021-00640-x.

Antimicrobial Activity of the Synthesized of Copper Chalcogenide Nanoparticles

Antimicrobial activity of copper chalcogenides nanoparticles was investigated by synthesizing copper selenide, copper sulfide, and copper oxide via the hot-injection method. Since reaction time has a profound effect on the nanocrystals size and shapes, the effect of reaction time was also investigated during the synthesis of the copper chalcogenides to obtain nanocrystals with desired properties. The reaction time showed no effect on the phase composition of the synthesized copper sulfide, copper oxide, and copper selenide nanoparticles. However, the size variation of nanoparticles with different reaction time was observed. Reaction time of 30 minutes gave the best optical (the shape of the absorption band edge and emission maxima values) and structural (size distribution of particles) properties for CuSe and CuS compared to other reaction times (15, 45, and 60 min). Their band edges were located at 506 (2.45 eV) and 538 nm (2.30 eV), respectively. For this reaction time, copper selenide produced nanoparticles with a size range of 1–27 nm and copper sulfide nanoparticles ranged 1–18 nm. The morphologies of both chalcogenides at 30 min reaction time were spherical. Reaction time of 15 minutes gave the best optical and structural properties for copper oxide nanoparticles with a band edge of 454 nm (2.73 eV) and particle size ranging 0.8–3.2 nm, but nonetheless, 30 min was used as the optimum reaction time for all three chalcogenides. The optimum parameter (220°C, 30 min, and 1 : 1 ratio) was used to synthesize the three copper chalcogenides which were then tested against Gram-negative (E. coli and P. aeruginosa), Gram-positive (S. aureus and E. faecalis), and fungi (C. albicans) employing both agar disk diffusion and minimum inhibitory concentration (MICs) methods. Copper oxide nanoparticles showed more sensitivity towards four bacterial microorganisms than the other two chalcogenides followed by copper sulfide nanoparticles with copper selenide nanoparticles being the least sensitive. The sensitivity of copper oxide nanoparticles is attributed to the smaller size of oxygen atom which strongly affects its reactivity and stability and hence very stable and highly reactive compared to sulfur and selenium.

In-Vitro Application of Magnetic Hybrid Niosomes: Targeted siRNA-Delivery for Enhanced Breast Cancer Therapy

Even though the administration of chemotherapeutic agents such as erlotinib is clinically established for the treatment of breast cancer, its efficiency and the therapy outcome can be greatly improved using RNA interference (RNAi) mechanisms for a combinational therapy. However, the cellular uptake of bare small interfering RNA (siRNA) is insufficient and its fast degradation in the bloodstream leads to a lacking delivery and no suitable accumulation of siRNA inside the target tissues. To address these problems, non-ionic surfactant vesicles (niosomes) were used as a nanocarrier platform to encapsulate Lifeguard (LFG)-specific siRNA inside the hydrophilic core. A preceding entrapment of superparamagnetic iron-oxide nanoparticles (FexOy-NPs) inside the niosomal bilayer structure was achieved in order to enhance the cellular uptake via an external magnetic manipulation. After verifying a highly effective entrapment of the siRNA, the resulting hybrid niosomes were administered to BT-474 cells in a combinational therapy with either erlotinib or trastuzumab and monitored regarding the induced apoptosis. The obtained results demonstrated that the nanocarrier successfully caused a downregulation of the LFG gene in BT-474 cells, which led to an increased efficacy of the chemotherapeutics compared to plainly added siRNA. Especially the application of an external magnetic field enhanced the internalization of siRNA, therefore increasing the activation of apoptotic signaling pathways. Considering the improved therapy outcome as well as the high encapsulation efficiency, the formulated hybrid niosomes meet the requirements for a cost-effective commercialization and can be considered as a promising candidate for future siRNA delivery agents.

Facet-Dependent Photodegradation of Methylene Blue by Hematite Nanoplates in Visible Light

The expression of specific crystal facets in different nanostructures is known to play a vital role in determining the sensitivity toward the photodegradation of organics, which can generally be ascribed to differences in surface structure and energy. Herein, we report the synthesis of hematite nanoplates with controlled relative exposure of basal (001) and edge (012) facets, enabling us to establish direct correlation between the surface structure and the photocatalytic degradation efficiency of methylene blue (MB) in the presence of hydrogen peroxide. MB adsorption experiments showed that the capacity on (001) is about three times larger than on (012). Density functional theory calculations suggest the adsorption energy on the (001) surface is 6.28 kcal/mol lower than that on the (012) surface. However, the MB photodegradation rate on the (001) surface is around 14.5 times faster than on the (012) surface. We attribute this to a higher availability of the photoelectron accepting surface Fe³⁺ sites on the (001) facet. This facilitates more efficient iron valence cycling and the heterogeneous photo-Fenton reaction yielding MB-oxidizing hydroxyl radicals at the surface. Our findings help establish a rational basis for the design and optimization of hematite nanostructures as photocatalysts for environmental remediation.

Investigation of the thermal removal steps of capping agents in the synthesis of bimetallic iridium-based catalysts for the ethanol oxidation reaction

Two iridium-based catalysts (namely IrSn and IrNi) are synthesised via a polyol route involving capping agents.

Facile one-pot synthesis of water-soluble fcc FePt3 alloy nanostructures

Proccessible FePt3 alloy nanoparticles with sizes smaller than 50 nm open the avenue to novel magnetic sensor, catalytic and biomedical applications. Our research objective was to establish a highly scalable synthesis technique for production of single-crystalline FePt3 alloy nanoparticles. We have elaborated a one-pot thermal decomposition technique for the synthesis of superparamagnetic FePt3 nanoparticles (FePt3 NPs) with mean sizes of 10 nm. Subsequent tiron coating provided water solubility of the FePt3 NPs and further processibility as bidental ligands enable binding to catalyst surfaces, smart substrates or biosensors. The chemical composition, structure, morphology, magnetic, optical and crystallographic properties of the FePt3 NPs were examined using high resolution transmission electron microscopy, high-angle annular dark field-scanning transmission electron microscopy, scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy mapping, Fourier transform infrared-attenuated total reflection, X-ray powder diffraction, X-ray photoelectron spectroscopy, vibrating sample magnetometry and UV–Vis absorption spectroscopy.

Tuning the size and composition of manganese oxide nanoparticles through varying temperature ramp and aging time

Manganese oxide (MnO) nanoparticles (NPs) can serve as robust pH-sensitive contrast agents for magnetic resonance imaging (MRI) due to Mn2+ release at low pH, which generates a ~30 fold change in T1 relaxivity. Strategies to control NP size, composition, and Mn2+ dissolution rates are essential to improve diagnostic performance of pH-responsive MnO NPs. We are the first to demonstrate that MnO NP size and composition can be tuned by the temperature ramping rate and aging time used during thermal decomposition of manganese(II) acetylacetonate. Two different temperature ramping rates (10°C/min and 20°C/min) were applied to reach 300°C and NPs were aged at that temperature for 5, 15, or 30 min. A faster ramping rate and shorter aging time produced the smallest NPs of ~23 nm. Shorter aging times created a mixture of MnO and Mn3O4 NPs, whereas longer aging times formed MnO. Our results indicate that a 20°C/min ramp rate with an aging time of 30 min was the ideal temperature condition to form the smallest pure MnO NPs of ~32 nm. However, Mn2+ dissolution rates at low pH were unaffected by synthesis conditions. Although Mn2+ production was high at pH 5 mimicking endosomes inside cells, minimal Mn2+ was released at pH 6.5 and 7.4, which mimic the tumor extracellular space and blood, respectively. To further elucidate the effects of NP composition and size on Mn2+ release and MRI contrast, the ideal MnO NP formulation (~32 nm) was compared with smaller MnO and Mn3O4 NPs. Small MnO NPs produced the highest amount of Mn2+ at acidic pH with maximum T1 MRI signal; Mn3O4 NPs generated the lowest MRI signal. MnO NPs encapsulated within poly(lactide-co-glycolide) (PLGA) retained significantly higher Mn2+ release and MRI signal compared to PLGA Mn3O4 NPs. Therefore, MnO instead of Mn3O4 should be targeted intracellularly to maximize MRI contrast.

Size-Controlled Synthesis of Iron and Iron Oxide Nanoparticles by the Rapid Inductive Heating Method

Inductive heating synthesis is an emerging technique with the potential to displace the hot-injection synthesis method to prepare colloidal particles very rapidly with a narrow size distribution, controlled size, and high crystallinity. In this work, the inductive heating synthesis is applied to produce a short-temperature jump to mimic conditions like the hot-injection method to prepare traditional iron and iron oxide nanoparticles (IONPs) in the 3-11 nm size range within various solvents, precursors, and reaction time conditions. Moreover, this inductive heating technique can be used under unique experimental conditions not available for hot-injection reactions. These conditions include the use of very high initial monomer concentrations. Considering benefits over conventional methods, the inductive heating technique has the potential to provide an industrial level scale-up synthesis. The magnetization of these particles is consistent with the magnetization of the particles from the literature.

The systematic study of the precursor ratio effect in the Cd–Zn–S quantum dot synthesis

The controllable synthesis of highly photoluminescent Cd–Zn–S QDs with application of novel N-phenylmorpholine-4-carbothioamide as an eco-friendly sulphur source.

Polysaccharide-Hydrophobic Nanoparticle Hybrid Nanoclusters for Enhanced Performance in Magnetic Resonance/Photoacoustic Imaging

Polysaccharide-nanoparticle (NP) hybrid nanoclusters have great potential to revitalize diverse bioapplications; however, fabricating polysaccharide-based hybrid nanoclusters composed of high-quality NPs generated in the organic phase remains a challenge. Here, using calcium alginate as a polysaccharide/tetramethylammonium hydroxide (TMAOH) combination, we report a novel approach to the design of alginate-hydrophobic magnetic-plasmonic core-shell (MPCS) NP hybrid nanoclusters (A-MPCS HNCs). Furthermore, we observe the dependence of the formation of A-MPCS HNCs on the TMAOH concentration. The enhanced performance in both magnetic resonance r₂ relaxivity and photoacoustic (PA) signals and the biocompatibility/bioactivity as well as the in vivo performance of A-MPCS HNCs shows them to be a promising magnetic resonance/photoacoustic dual-mode imaging agent. Our strategy could open doors to the use of other precious high-quality nanomaterials created in the organic phase via well-established synthetic chemistry in the design of alginate-hydrophobic nanomaterial hybrid nanoclusters, giving rise to novel and multifarious bioapplications.

Observing the colloidal stability of iron oxide nanoparticles in situ

Colloidal processes such as nucleation, growth, ripening, and dissolution are fundamental to the synthesis and application of engineered nanoparticles, as well as numerous natural systems. In nanocolloids consisting of a dispersion of nanoparticles in solution, colloidal stability is influenced by factors including the particle surface facet and capping layer, and local temperature, chemistry, and acidity. In this paper, we investigate colloidal stability through the real-time manipulation of nanoparticles using in situ liquid cell Scanning Transmission Electron Microscopy (STEM). In a distribution of uniform iron oxide nanoparticles, we use the electron beam to precisely control the local chemistry of the solution and observe the critical role that surface chemistry plays in nanoparticle stability. By functionalizing the nanoparticle surfaces with charged amino acids and peptides, stability can be tuned to promote dissolution, growth, or agglomeration, either permanently or reversibly. STEM imaging is used to quantify kinetics of individual nanoparticles subject to local variations in chemistry. These measurements of dissolution and growth rates of iron oxide nanoparticles provide insights into nanoparticle stability relevant to synthesis and functionalization for biomedical applications.

Self-assembly of a robust hydrogen-bonded octylphosphonate network on cesium lead bromide perovskite nanocrystals for light-emitting diodes

We report the self-assembly of an extensive inter-ligand hydrogen-bonding network of octylphosphonates on the surface of cesium lead bromide nanocrystals (CsPbBr₃ NCs). The post-synthetic addition of octylphosphonic acid to oleic acid/oleylamine-capped CsPbBr₃ NCs promoted the attachment of octylphosphonate to the NC surface, while the remaining oleylammonium ligands maintained the high dispersability of the NCs in non-polar solvent. Through powerful 2D solid-state ³¹P-¹H NMR, we demonstrated that an ethyl acetate/acetonitrile purification regime was crucial for initiating the self-assembly of extensive octylphosphonate chains. Octylphosphonate ligands were found to preferentially bind in a monodentate mode through P-O^-, leaving polar P[double bond, length as m-dash]O and P-OH groups free to form inter-ligand hydrogen bonds. The octylphosphonate ligand network strongly passivated the nanocrystal surface, yielding a fully-purified CsPbBr₃ NC ink with PLQY of 62%, over 3 times higher than untreated NCs. We translated this to LED devices, achieving maximum external quantum efficiency and luminance of 7.74% and 1022 cd m^-2 with OPA treatment, as opposed to 3.59% and 229 cd m^-2 for untreated CsPbBr₃ NCs. This represents one of the highest efficiency LEDs obtained for all-inorganic CsPbBr₃ NCs, accomplished through simple, effective passivation and purification processes. The robust binding of octylphosphonates to the perovskite lattice, and specifically their ability to interlink through hydrogen bonding, offers a promising passivation approach which could potentially be beneficial across a breadth of halide perovskite optoelectronic applications.

Simultaneous Ligand Exchange Fabrication of Flexible Perovskite Solar Cells using Newly Synthesized Uniform Tin Oxide Quantum Dots

Halide perovskite solar cells (HPSCs) have a significant potential for future photovoltaic systems because of a high power conversion efficiency (PCE) exceeding 23% using solution processing methods. A low-temperature processed oxide layer is a challenging issue for large-scale manufacture of flexible and low-cost HPSCs. Here, we propose a simple reverse micelle-water injection method for highly dispersed ligand-capped ultrafine SnO₂ quantum dots (QD). Interestingly, we observed that the ligands, which help in the formation of a uniform SnO₂ QD thin film, spontaneously exchange for halide through a perovskite solution, and finally we form a suitable SnO₂ QD-halide junction for high-performance HPSCs. The flexible HPSC with the SnO₂ QD-halide junction formed via the ligand exchange exhibits a high PCE of 17.7% using a flexible substrate. It also shows an excellent flexibility, where the initial PCE is maintained within 92% after 1000 bending cycles with a bending radius of 18 mm.

Hybrid Decorated Core@Shell Janus Nanoparticles as a Flexible Platform for Targeted Multimodal Molecular Bioimaging of Cancer

In the recent years, targeted cancer theranosis, the concomitant therapeutic treatment and selective visualization of cancerous tissue, has become a powerful strategy to improve patient prognosis. In this context, targeted multimodal molecular imaging, the combination of different imaging modalities overcoming their individual limitations, has attracted great attention. Due to their unique properties, advanced nanomaterials have taken center stage in the development of theranostics. In this work, we report a novel Janus nanoplatform by combining an Fe₃O₄ NPs/mesoporous silica core@shell face together with an Au nanoparticle face. Due to its anisotropy, this hybrid nanomaterial enabled the orthogonal site-selective modification of each face permitting the incorporation of a targeting peptide for cancer detection (cRGD) and a fluorescent dye. Due to the intrinsic characteristics of this Janus nanoplatform together with those selectively generated on their surfaces, the resulting hybrid nanocarrier successfully promoted the in vivo tumor-targeted multimodal imaging by magnetic resonance (Fe₃O₄ core), computed tomography (AuNP face), and fluorescent tracking (fluorescent dye loading) in a fibrosarcoma-bearing mouse model. The achieved results endorse these hybrid Janus nanoparticles as a powerful and flexible platform with integrated imaging and carrier functionalities to be equipped with therapeutic features to generate an advanced multifunctional nanocarrier for targeted cancer theranosis.

Polyaspartamide-based graft copolymers encapsulating iron oxide nanoparticles for imaging and fluorescence labelling of immune cells

Iron oxide nanoparticles (NPs) were encapsulated with polyaspartamide-based graft copolymers to bind and track the immune cells as imaging probes. Mono-disperse iron oxide NPs with a mean diameter of 10.7 nm were synthesized by the thermal decomposition method, and their shape and distribution were measured by electrophoretic light scattering and transmission electron microscopy. To enhance their biocompatibility, interfacial and hydrodynamic stability, and fluorescence detection, biodegradable polysuccinimide (PSI) grafted with several functional groups of octadecylamine (C18), ethanolamine (EA), ethylenediamine (EDA), 4-(N-maleimidomethyl) cyclohexane carboxylic acid N-hydroxysuccinimide ester (SMCC), and fluorescein isothiocyanate (FITC) was coated on the iron oxide NPs. The structure of the C18/EA/SMCC/FITC-g-PSI copolymer was confirmed using ¹H-NMR and FTIR spectroscopy, and its cell binding ability was investigated by flow cytometry and confocal laser scanning microscopy. The synthesized C18/EA/SMCC/FITC-g-PSI copolymer showed an excellent binding affinity to CD4+ T cells, and was highly biocompatible as the cell viability at the highest polymer concentration of 0.4 mg mL^-1 was greater than 85 and 75% after 24 and 48 h, respectively, from MTT assay.

Large-Scale Automated Production of Highly Ordered Ultralong Hydroxyapatite Nanowires and Construction of Various Fire-Resistant Flexible Ordered Architectures

Practical applications of nanostructured materials have been largely limited by the difficulties in controllable and scaled-up synthesis, large-sized highly ordered self-assembly, and macroscopic processing of nanostructures. Hydroxyapatite (HAP), the major inorganic component of human bone and tooth, is an important biomaterial with high biocompatibility, bioactivity, and high thermal stability. Large-sized highly ordered HAP nanostructures are of great significance for applications in various fields and for understanding the formation mechanisms of bone and tooth. However, the synthesis of large-sized highly ordered HAP nanostructures remains a great challenge, especially for the preparation of large-sized highly ordered ultralong HAP nanowires because ultralong HAP nanowires are easily tangled and aggregated. Herein, we report our three main research findings: (1) the large-scale synthesis of highly flexible ultralong HAP nanowires with lengths up to >100 μm and aspect ratios up to >10000; (2) the demonstration of a strategy for the rapid automated production of highly flexible, fire-resistant, large-sized, self-assembled highly ordered ultralong HAP nanowires (SHOUHNs) at room temperature; and (3) the successful construction of various flexible fire-resistant HAP ordered architectures using the SHOUHNs, such as high-strength highly flexible nanostructured ropes (nanoropes), highly flexible textiles, and 3-D printed well-defined highly ordered patterns. The SHOUHNs are successively formed from the nanoscale to the microscale then to the macroscale, and the ordering direction of the ordered HAP structure is controllable. These ordered HAP architectures made from the SHOUHNs, such as highly flexible textiles, may be engineered into advanced functional products for applications in various fields, for example, fireproof clothing.

Facile synthesis of novel hydrophilic and carboxyl-amine functionalized superparamagnetic iron oxide nanoparticles for biomedical applications

We report a one-step facile synthesis of novel water-soluble and functionalized SPIONs, which could be promising candidates for cancer theranostics.

Super-Paramagnetic Nanoparticles with Spinel Structure: A Review of Synthesis and Biomedical Applications

The study of ceramic materials has attracted the attention of many researchers due to the possibility of their use in nanotechnology. The spinel ferrites form a large group of materials with a broad range of applications. Some examples include electronic devices such as high-frequency transformer cores, antenna rods, induction-tuners, among many others. However, when the ferritic materials display superparamagnetic behavior, their potential for biological applications like drug delivery, hyperthermia, resonance magnetic imaging and magnetic separation, become amazingly high. Therefore, the superparamagnetism is a characteristic strongly desired for spinel ferrites. Since this phenomenon is size-dependent, the methodologies to synthesize these materials has emerged as a crucial step in order to obtain the desired properties. In this regarding, several synthetic processes have been developed. For example, co-precipitation is a fast and cheap method to synthesize superparamagnetic spinel ferrites. However, methodologies involving microwave, ultrasound or polymers frequently result in these kind of materials. Therefore, this review brings a brief historic introduction about spinel ferrites as well as essential concepts to understand their structure and magnetic properties. In addition to this, recent advances in synthesis and applications of the superparamagnetic spinel ferrites are mentioned. Contents of Paper

Mössbauer cell for low-temperature studies of catalysts under reaction conditions

Mössbauer spectroscopy is an essential tool to investigate the structure of Fe supported catalysts and their changes, when they are used in the Fischer-Tropsch synthesis. A cell, that allows keeping the samples in the same atmosphere of the reduction treatment, was designed in order to characterize the Fe species without changing the working atmosphere avoiding the oxidation. It allows to measure at low temperatures in a helium closed-cycle refrigerator. Besides, this cell is useful to perform Mössbauer measurements on the used catalysts, preserving the oxidation of its species, using an inert atmosphere. In this work, we describe the details of this new cell and, as an example of its utility, we present the results obtained with a system of 12 nm iron oxide nanoparticles supported on a mesoporous silica matrix.

Nanoparticles for hyperthermic therapy: synthesis strategies and applications in glioblastoma

Glioblastoma multiforme (GBM) is the most common and most aggressive malignant primary brain tumor in humans. Current GBM treatment includes surgery, radiation therapy, and chemotherapy, sometimes supplemented with novel therapies. Despite recent advances, survival of GBM patients remains poor. Major challenges in GBM treatment are drug delivery across the blood–brain barrier, restriction of damage to healthy brain tissues, and limitation of resistance to therapies. This article reviews recent advances in the application of magnetic nanoparticles (MNPs), gold nanorods (GNRs), and carbon nanotubes (CNTs) for hyperthermia ablation of GBM. First, the article introduces GBM, its current treatment, and hyperthermia as a potential modality for the management of GBM. Second, it introduces MNPs, GNRs, and CNTs as inorganic agents to induce hyperthermia in GBM. Third, it discusses different methodologies for synthesis of each inorganic agent. Finally, it reviews in vitro and in vivo studies in which MNPs, GNRs, and CNTs have been applied for hyperthermia ablation and drug delivery in GBM.

Formulation design facilitates magnetic nanoparticle delivery to diseased cells and tissues

Magnetic nanoparticles (MNPs) accumulate at disease sites with the aid of magnetic fields; biodegradable MNPs can be designed to facilitate drug delivery, influence disease diagnostics, facilitate tissue regeneration and permit protein purification. Because of their limited toxicity, MNPs are widely used in theranostics, simultaneously facilitating diagnostics and therapeutics. To realize therapeutic end points, iron oxide nanoparticle cores (5-30 nm) are encapsulated in a biocompatible polymer shell with drug cargos. Although limited, the toxic potential of MNPs parallels magnetite composition, along with shape, size and surface chemistry. Clearance is hastened by the reticuloendothelial system. To surmount translational barriers, the crystal structure, particle surface and magnetic properties of MNPs need to be optimized. With this in mind, we provide a comprehensive evaluation of advancements in MNP synthesis, functionalization and design, with an eye towards bench-to-bedside translation.

Conjugates of magnetic nanoparticle-actinide specific chelator for radioactive waste separation

A novel nanotechnology for the separation of radioactive waste that uses magnetic nanoparticles (MNPs) conjugated with actinide specific chelators (MNP-Che) is reviewed with a focus on design and process development. The MNP-Che separation process is an effective way of separating heat generating minor actinides (Np, Am, Cm) from spent nuclear fuel solution to reduce the radiological hazard. It utilizes coated MNPs to selectively adsorb the contaminants onto their surfaces, after which the loaded particles are collected using a magnetic field. The MNP-Che conjugates can be recycled by stripping contaminates into a separate, smaller volume of solution, and then become the final waste form for disposal after reusing number of times. Due to the highly selective chelators, this remediation method could be both simple and versatile while allowing the valuable actinides to be recovered and recycled. Key issues standing in the way of large-scale application are stability of the conjugates and their dispersion in solution to maintain their unique properties, especially large surface area, of MNPs. With substantial research progress made on MNPs and their surface functionalization, as well as development of environmentally benign chelators, this method could become very flexible and cost-effective for recycling used fuel. Finally, the development of this nanotechnology is summarized and its future direction is discussed.