A multi-channel magnetic induction tomography measurement system for human brain model imaging

Space-constrained optimized Tikhonov regularization method for 3D hemorrhage reconstruction by open magnetic induction tomography

Objective. Open magnetic induction tomography (MIT) is a promising technique for detecting the intracranial hemorrhage due to the non-radioactive, non-invasive and portable features. However, severe inhomogeneity of the sensitivity distribution under the open MIT sensor array and the ill-conditioned nature of MIT inverse problem limit the imaging quality in hemorrhage reconstruction. More accurate and robust imaging algorithms are urgently needed in clinical diagnosis.Approach.In this study, the space-constrained optimized Tikhonov regularization (SOTR) method is proposed for 3D hemorrhage reconstruction by open MIT. The sensitivity matrix is optimized according to the characteristics of sensitivity distribution under the open MIT sensor array. To test the performance of the SOTR method, 3D anatomical head models with hemorrhages in different volumes and locations were established. The images of the hemorrhages were reconstructed by the Tikhonov regularization (TR), total variation (TV) regularization, isotropic SOTR, and anisotropic SOTR method. Correlation coefficientCC,localization errorLE,and volume errorVEwere calculated to evaluate the hemorrhage imaging quality. Mainresults. Compared with the traditional sensitivity matrix, the optimized sensitivity matrix has smaller column number and better uniformity, which alleviates the under-determined and ill-conditioned problem of MIT. The imaging results indicate that both the isotropic and anisotropic SOTR methods can effectively improve the reconstruction accuracy for the location and volume of the hemorrhages. Moreover, compared with the TR and TV methods, the two SOTR methods are more robust against the measurement noise.Significance. The proposed method improves the imaging quality of the intracranial hemorrhage, which promotes the clinical applications of open MIT.

Three-Dimensional Magnetic Induction Tomography: Practical Implementation for Imaging throughout the Depth of a Low Conductive and Voluminous Body

Magnetic induction tomography (MIT) is a contactless, low-energy method used to visualize the conductivity distribution inside a body under examination. A particularly demanding task is the three-dimensional (3D) imaging of voluminous bodies in the biomedical impedance regime. While successful MIT simulations have been reported for this regime, practical demonstration over the entire depth of weakly conductive bodies is technically difficult and has not yet been reported, particularly in terms of more realistic requirements. Poor sensitivity in the central regions critically affects the measurements. However, a recently simulated MIT scanner with a sinusoidal excitation field topology promises improved sensitivity (>20 dB) from the interior. On this basis, a large and fast 3D MIT scanner was practically realized in this study. Close agreement between theoretical forward calculations and experimental measurements underline the technical performance of the sensor system, and the previously only simulated progress is hereby confirmed. This allows 3D reconstructions from practical measurements to be presented over the entire depth of a voluminous body phantom with tissue-like conductivity and dimensions similar to a human torso. This feasibility demonstration takes MIT a step further toward the quick 3D mapping of a low conductive and voluminous object, for example, for rapid, harmless and contactless thorax or lung diagnostics.

Technologies for magnetic induction tomography sensors and image reconstruction in medical assisted diagnosis: A review

Magnetic induction tomography (MIT) is a non-invasive and non-contact imaging technology, which can be used in medical diagnosis by reconstructing the electrical distribution of biological tissues. Unlike other large medical imaging equipment, the device of MIT is with small size and low cost. The theoretical basis of MIT is by measuring the phase difference of magnetic flux density generated around the imaging objects, analyzing the eddy current distribution, and then using the reconstruction algorithms to obtain the electrical characteristic distribution of the object. This review introduces the development of imaging systems and the reconstruction algorithms of MIT as a medical assisted diagnostic technology, including the optimal design of the sensors, the excitation methods of the system, the calculation methods of the eddy current, and the improved methods of different reconstruction algorithms.

Three-dimensional Magnetic Induction Tomography: Improved Performance for the Center Regions inside a Low Conductive and Voluminous Body

Magnetic induction tomography (MIT) is a contactless technique that is used to image the distribution of passive electromagnetic properties inside a voluminous body. However, the central area sensitivity (CAS) of this method is critically weak and blurred for a low conductive volume. This article analyzes this challenging issue, which inhibits even faint imaging of the central interior region of a body, and it suggests a remedy. The problem is expounded via two-dimensional (2D) and three-dimensional (3D) eddy current simulations with different transmitter geometries. On this basis, it is shown that a spatially undulating exciter coil can significantly improve the CAS by >20 dB. Consequently, the central region inside a low conductive voluminous object becomes clearly detectable above the noise floor, a fact which is also confirmed by practical measurements. The improved sensitivity map of the new arrangement is compared with maps of more typical circular MIT geometries. In conclusion, 3D MIT reconstructions are presented, and for the same incidence of noise, their performance is much better with the suggested improvement than that with a circular setup.

Screening and Biosensor-Based Approaches for Lung Cancer Detection

Early diagnosis of lung cancer helps to reduce the cancer death rate significantly. Over the years, investigators worldwide have extensively investigated many screening modalities for lung cancer detection, including computerized tomography, chest X-ray, positron emission tomography, sputum cytology, magnetic resonance imaging and biopsy. However, these techniques are not suitable for patients with other pathologies. Developing a rapid and sensitive technique for early diagnosis of lung cancer is urgently needed. Biosensor-based techniques have been recently recommended as a rapid and cost-effective tool for early diagnosis of lung tumor markers. This paper reviews the recent development in screening and biosensor-based techniques for early lung cancer detection.

A special phase detector for magnetic inductive measurement of cerebral hemorrhage

Cerebral hemorrhage is an important clinical problem that is often monitored and studied with expensive techniques, such as computed tomography (CT), magnetic resonance imaging (MRI), and positron emission tomography (PET). These devices are not readily available in economically underdeveloped regions of the world and in emergency departments and emergency zones. The magnetic inductive method is an emerging technology that may become a new tool to detect cerebral hemorrhage. In this study, a special phase detector (PD) was developed and used for cerebral hemorrhage detection with the magnetic inductive method. The performance indicated that the PD can achieve phase noise as low as 6 m° and a 4-hour phase drift as low as 30 m° at 21.4 MHz. The noise and drift decreased as the frequency decreased. The performance at 10.7 MHz was slightly better than that of other recently developed phase detection systems. To test the practicality of the system, the PD was used to detect the volume change in a self-made physical model of the brain. The measured phase shift was approximately proportional to the volume change of physiological saline inside the model. The change of the phase shift increased as the volume change and frequency increased. The results are in agreement with those from previous reports. To verify the feasibility of in vivo detection, an autologous blood injection model was established in rabbit brain. The results from the injection group showed a similar trend of increasing phase shift change with increasing injection volume. The average phase shift change induced by a 3-ml injection of blood was 0.502°±0.119°, which was much larger than that of the control group. The measurement system can distinguish a minimal cerebral hemorrhage volume of approximately 0.5 ml. All of the results demonstrated that the PD used with this method can detect cerebral hemorrhage.

Advancements in transmitters and sensors for biological tissue imaging in magnetic induction tomography

Magnetic Induction Tomography (MIT), which is also known as Electromagnetic Tomography (EMT) or Mutual Inductance Tomography, is among the imaging modalities of interest to many researchers around the world. This noninvasive modality applies an electromagnetic field and is sensitive to all three passive electromagnetic properties of a material that are conductivity, permittivity and permeability. MIT is categorized under the passive imaging family with an electrodeless technique through the use of excitation coils to induce an electromagnetic field in the material, which is then measured at the receiving side by sensors. The aim of this review is to discuss the challenges of the MIT technique and summarize the recent advancements in the transmitters and sensors, with a focus on applications in biological tissue imaging. It is hoped that this review will provide some valuable information on the MIT for those who have interest in this modality. The need of this knowledge may speed up the process of adopted of MIT as a medical imaging technology.

Frequency-difference MIT imaging of cerebral haemorrhage with a hemispherical coil array: numerical modelling

The feasibility of detecting a cerebral haemorrhage with a hemispherical MIT coil array consisting of 56 exciter/sensor coils of 10 mm radius and operating at 1 and 10 MHz was investigated. A finite difference method combined with an anatomically realistic head model comprising 12 tissue types was used to simulate the strokes. Frequency-difference images were reconstructed from the modelled data with different levels of the added phase noise and two types of a priori boundary errors: a displacement of the head and a size scaling error. The results revealed that a noise level of 3 m degrees (standard deviation) was adequate for obtaining good visualization of a peripheral stroke (volume approximately 49 ml). The simulations further showed that the displacement error had to be within 3-4 mm and the scaling error within 3-4% so as not to cause unacceptably large artefacts on the images.