Biopolymer-based hydrogels as injectable materials for tissue repair scaffolds

An investigation of water status in gelatin methacrylate hydrogels by means of water relaxometry and differential scanning calorimetry

The relationship between molecular structure and water dynamics is a fundamental yet often neglected subject in the field of hydrogels for drug delivery, bioprinting, as well as biomaterial science and tissue engineering & regenerative medicine (TE&RM). Water is a fundamental constituent of hydrogel systems and engages via hydrogen bonding with the macromolecular network. The methods and techniques to measure and reveal the phenomena and dynamics of water within hydrogels are still limited. In this work, differential scanning calorimetry (DSC) was used as a quantitative method to analyze freezable (including free and freezable bound) and non-freezable bound water within gelatin methacrylate (GelMA) hydrogels. Nuclear magnetic resonance (NMR) is a complementary method for the study of water behavior and can be used to measure the spin-relaxation of water hydrogen nuclei, which is related to water dynamics. In this research, nuclear magnetic resonance relaxometry was employed to investigate the molecular state of water in GelMA hydrogels using spin-lattice (T1) and spin-spin (T2) spin-relaxation time constants. The data displays a trend of increasing bound water content with increasing GelMA concentration. In addition, T2 values were further applied to calculate microviscosity and translational diffusion coefficients. Water relaxation under various chemical environments, including different media, temperatures, gelatin sources, as well as crosslinking effects, were also examined. These comprehensive physical data sets offer fundamental insight into biomolecule transport within the GelMA hydrogel system, which ultimately are important for drug delivery, bioprinting, as well as biomaterial science and TE&RM communities.

Collagen/chitosan/genipin hydrogel loaded with phycocyanin nanoparticles and ND-336 for diabetic wound healing

Diabetic wound healing remains a healthcare challenge due to the overexpression of matrix metalloproteinase-9 (MMP-9) and the imbalance between angiogenic factors and vascular inhibitory factors. In this study, we developed a nanocomposite injectable collagen/chitosan hydrogel for the treatment of delayed diabetic wound healing, which can promote cell migration to the wound site (through the addition of phycocyanin) and reduce the expression of MMP-9 (through the use of ND-336) to improve the therapeutic effect of diabetic wound healing. Furthermore, different weight ratios of collagen and chitosan hydrogels were prepared to select the hydrogel with proper mechanical properties. In vitro experiments confirmed that all hydrogels have favorable biocompatibility and hemocompatibility. Notably, Gel 2, with a weight ratio of collagen and chitosan at 25:75, was found to have an excellent capability to facilitate cell migration and in vivo studies further proved that Gel 2 nanocomposite hydrogel had the best ability to improve diabetic wound healing by promoting cell migration and decreasing MMP-9 expression. The collagen/chitosan/genipin hydrogel loaded phycocyanin and ND-336 can be harnessed for non-toxic and efficient treatment of wound healing management of diabetes.

In vitro investigation of wound healing performance of PVA/chitosan/silk electrospun mat loaded with deferoxamine and ciprofloxacin

Electrospinning is an advanced method used for developing wound dressings. Biopolymer-based electrospun mats have been extensively studied in tissue engineering due to their similarity to the extracellular matrix. In this study, electrospun poly(vinyl alcohol)/chitosan/silk fibroin (PChS) mat demonstrated improved mechanical properties, including tensile strength, strain at break, and Young's modulus, compared to electrospun poly(vinyl alcohol) and poly(vinyl alcohol)/chitosan mats. Similarly, the swelling capability, thermal stability, and hydrophilicity were higher in the PChS mat compared to the other ones. Hence, the PChS mat was selected for further investigation. Ciprofloxacin (CIP) was added to the PChS electrospinning solution at 5 % and 10 % concentration, and deferoxamine (DFO) was immobilized on CIP-loaded mats at 1 and 2 g/L concentration using a polydopamine linker. Evaluating mats with the dimensions of 1 × 1 cm2 showed that those containing 5 % and 10 % CIP exhibited bactericidal activity against Escherichia coli and Staphylococcus aureus. Moreover, Human dermal fibroblast cells were compatible with the fabricated mats, as confirmed by the MTT assay. Finally, drug-loaded mats had a positive effect on wound healing in a scratch test, and mats with 10 % CIP and 2 g/L DFO showed the highest effect on promoting wound healing, indicating potential for use as a wound dressing.

Synthesis, Characterization and Biological Properties of Type I Collagen-Chitosan Mixed Hydrogels: A Review

Type I collagen and chitosan are two of the main biological macromolecules used to design scaffolds for tissue engineering. The former has the benefits of being biocompatible and provides biochemical cues for cell adhesion, proliferation and differentiation. However, collagen hydrogels usually exhibit poor mechanical properties and are difficult to functionalize. Chitosan is also often biocompatible, but is much more versatile in terms of structure and chemistry. Although it does have important biological properties, it is not a good substrate for mammalian cells. Combining of these two biomacromolecules is therefore a strategy of choice for the preparation of interesting biomaterials. The aim of this review is to describe the different protocols available to prepare Type I collagen-chitosan hydrogels for the purpose of presenting their physical and chemical properties and highlighting the benefits of mixed hydrogels over single-macromolecule ones. A critical discussion of the literature is provided to point out the poor understanding of chitosan-type I collagen interactions, in particular due to the lack of systematic studies addressing the effect of chitosan characteristics.

Design and characterization of Persian gum/polyvinyl alcohol electrospun nanofibrous scaffolds for cell culture applications

Biocompatible electrospun nanofiber scaffolds were fabricated in this study using Persian gum (PG) and poly (vinyl alcohol) (PVA) to build an artificial extracellular matrix for cell growth. The preparation procedure involves mixing various ratios of PG/PVA to be electrospun and seeded with L929 fibroblasts. Upon addition of PG up to 60% to the solutions, a 30% decrease to around 240 μs·cm^-1 is found in electrical conductivity which is in the range of semi-conductive polymers, whereas the surface tension is increased to around 3%. The fabricated scaffolds were characterized by morphological, chemical, thermal and structural analyses including SEM, FTIR spectroscopy, DSC, XRD, and tensile stress. The results showed that incorporation of 50% PG to the polymer solutions causes the formation of nanofibers with the least bead-shaped segments. All ratios of nanofibers containing PG showed significant biocompatibility with the cultured cells, which is presumably due to the radical scavenging feature of PG. The MTT and SEM analyses demonstrated that the scaffolds containing 50% PG possess the optimal cell compatibility, adhesion and proliferation properties. The fabricated PG/PVA cell culture scaffolds are potentially appropriate for wound dressing and cell culture applications in biomedicine.

Magnetic Properties of Collagen-Chitosan Hybrid Materials with Immobilized Superparamagnetic Iron Oxide Nanoparticles (SPIONs)

The paper presents results of our studies on hybrid materials based on polymers of natural origin containing superparamagnetic iron oxide nanoparticles (SPIONs). Such nanoparticles, coated with the chitosan derivative, were immobilized in a chitosan-collagen hydrogel matrix by crosslinking with genipin. Three types of biopolymer matrices of different collagen-to-chitosan ratios were studied. A thorough magnetic characterization was performed, including magnetic susceptibility, magnetization, and hysteresis loop measurements in a temperature range of 4 K to 300 K and a magnetic field induction up to 8 Tesla. The effect of SPION immobilization and material composition on the magnetic properties of the hybrids was investigated. The results showed that hybrid materials with covalently bounded SPIONs preserved the superparamagnetic character of SPIONs and exhibited promising magnetic properties, which are important for their potential applications.

Relationship between Bulk Physicochemical Properties and Surface Wettability of Hydrogels with Homogeneous Network Structure

Controlling hydrogel surface wettability is of great importance in the viewpoint of engineering biomaterials that are in contact with cells and tissues. However, studies reporting how the hydrogel bulk properties would affect the surface is scarce, and thus it has been difficult to fabricate hydrogels with the desired properties. Also, there has been no effective method to elucidate this, due to the inhomogeneity introduced in the network structure of conventional hydrogels. Here we report our approach in elucidating the relationship between hydrogel physicochemical parameters and surface wettability by using Tetra-PEG gels, which are known to have homogeneous network structure. Specifically, the polymer volume fraction (φ) and the molecular weight (M_W) between the cross-links were controlled. The number of anions, cations, and ionic pairs introduced within the hydrogel, were also individually controlled. The surface wettability of the resulting hydrogels was then evaluated. Results showed that surface wettability is largely dependent on the concentration of charged groups that are introduced in the hydrogel bulk, especially those that are not paired and ionically stabilized. Our findings strongly support the fact that with conventional hydrogels, the correlation between surface wettability and its physicochemical properties had not been evaluated appropriately, and thus our insights will contribute significantly to accumulating further knowledge on controlling hydrogel surface wettability.

Dual Crosslinked Collagen/Chitosan Film for Potential Biomedical Applications

The application of polymeric biomaterial scaffolds utilizing crosslinking strategy has become an effective approach in these days. In the present study, the development and characterization of collagen-chitosan hydrogel film has been reported on using dual crosslinking agent's, i.e., tannic acid and genipin simultaneously. Incorporation of genipin imparts a greenish-blue color to the polymeric film. The effect of dual crosslinking and their successful interaction within the matrix was evaluated by infrared analysis spectroscopy. The porosity of the film was examined using scanning electron microscopy (SEM). Results of TGA determine the intermediate thermal degradation. Further, the crosslinking phenomenon has found primary impact on the strength of the films. Enzymatic degradation for the films was performed with lysozyme and lipase. The cell adhesion and proliferation was also accomplished using mouse embryonic cell lines wherein the cells cultured on the dual crosslinked film. The thriving utilization of such dual crosslinked polymeric film finds their applications in ophthalmology especially as an implant for temporary injured cornea and skin tissue regeneration.

Bioactive yet antimicrobial structurally stable collagen/chitosan/lysine functionalized hyaluronic acid - based injectable hydrogels for potential bone tissue engineering applications

Novel, biocompatible, multifunctional, injectable genipin crosslinked collagen/chitosan/lysine-modified hyaluronic acid based hydrogels (ColChHA_mod) were prepared in a facile, one-step procedure. The novelty of the current approach lies in the functionalization of hyaluronic acid (HA) with primary amine groups by lysine attachment, and its further use as a component of the injectable sol. The obtained derivative, HA_mod, could form, upon crosslinking with genipin, covalent bonds with other components of the hydrogel network, resulting in structurally stable, better-defined hydrogels. We have demonstrated that, by adjusting HA_mod content and genipin concentration, hydrogels with tunable physicochemical characteristics (swelling, wettability, tendency for enzymatic degradation) and properties adequate for the potential bone tissue regeneration can be prepared. Storage modulus measurements indicated that HA_mod has positive effect on mechanical characteristics of hydrogels prepared. It was also revealed that the ColChHA_mod-based hydrogels are characterized by a high porosity (85-95%). The in situ rheological measurements confirmed the injectability of the obtained hydrogels. The in vitro cell culture studies showed that the surface of all materials prepared was biocompatible, as they supported proliferation and adhesion of osteoblast-like cells followed by ALP expression. The intrinsic antibacterial activity of the hydrogels against Escherichia coli was also demonstrated in in vitro experiment.

Genipin crosslinked bioactive collagen/chitosan/hyaluronic acid injectable hydrogels structurally amended via covalent attachment of surface-modified silica particles

Collagen, chitosan and hyaluronic acid based multicomponent injectable and in situ gellating biomimetic hybrid materials for bone tissue engineering applications were prepared in one-step procedure. The bioactive phase in the form of surface-modified silica particles was introduced to the solutions of biopolymers and simultaneously crosslinked with genipin both the biopolymer matrix and dispersed particles at 37 °C. The novel approach presented here involved the use of silica particles which surfaces were priory functionalized with amino groups. That modification makes possible the covalent attachment of silica particles to the polymeric hydrogel network on crosslinking with genipin. That methodology is especially important as it makes possible to obtain the hybrid materials (biopolymer-silica particles) in which the problems related to the potential phase separation of mineral particles, hindering their in vivo application can be eliminated. The hybrids of various compositions were obtained and their physicochemical and biological properties were determined. The in vitro experiments performed under simulated body fluid conditions revealed that the amino-functionalized silica particles covalently attached to the biopolymeric network are still bioactive. Finally, the in vitro cell culture studies shown that the materials developed are biocompatible as they supported MG-63 cells adhesion, proliferation as well as Alkaline phosphatase (ALP) expression.

Collagen/chitosan/hyaluronic acid - based injectable hydrogels for tissue engineering applications - design, physicochemical and biological characterization

Studies on synthesis, physico-chemical and biological properties of novel biomimetic materials, potentially useful as injectable hydrogels are presented. These materials are in situ prepared chemically crosslinked collagen/chitosan/hyaluronic acid-based hydrogels exhibiting potential for tissue regeneration. Optimization of hydrogels involved testing the effect of various concentration of crosslinking agent (genipin) as well as different ratios of biopolymers used on their properties. The changes in the content of hyaluronic acid and in the genipin concentration used have been shown to be crucial. Employing the highest concentration of crosslinking agent studied (20 mM) the hydrogels of compact structure, characterized by good mechanical properties and prolonged degradation profile can be obtained. Changing the HA content in sol mixture the hydrogel of various wettability; more or less hydrophilic when compared to pure collagen/chitosan hydrogels can be fabricated. The in vitro cell culture study has shown that the surface of the prepared materials ensures suitable biocompatibility. These hydrogels can support the proliferation and adhesion of MG-63 cell line as it was demonstrated using Alamar Blue assay and SEM observations. It is believed that the collagen/chitosan/hyaluronic acid hydrogels crosslinked with genipin are particularly promising materials for bone regeneration procedures, especially attractive for regeneration of small bone losses. This is the first paper in the litearature presenting results of studies on that type of biopolymeric injectable hydrogels chemically crosslinked with genipin.

Tuning of elasticity and surface properties of hydrogel cell culture substrates by simple chemical approach

When designing materials for tissue engineering applications various parameters characterizing both materials and tissue have to be taken into account. The characteristics such as chemistry, elasticity, wettability, roughness and morphology of the substrate's surface have significant impact on cell behavior. The paper presents biopolymer (collagen/chitosan) based hydrogel materials with tunable elasticity and surface properties useful for fabrication of substrates for cell culture. Using simple chemical approach involving the change in concentration of crosslinking agent (genipin) and composition of the reaction mixture the hydrogels characterized with various features were obtained. Detailed analysis of morphology, topography, roughness and elasticity of surface performed using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and rheological measurements has shown that the topographical aspects and roughness parameter can be modulated in nanoscale regime (13-47 nm). Substrate's elasticity could be modified in a wide range (0.2-270 kPa). Biological in vitro studies on fibroblasts behavior revealed that the materials prepared provide satisfactory conditions for cell culture, ensuring their high viability, good adhesion and normal morphology. The genipin crosslinked collagen-chitosan hydrogels characterized by denser fiber structure, higher elasticity and lower surface roughness are the most attractive supports for fibroblasts cultivation. The results obtained indicate that the properties of the materials developed can be easily tailored to the needs of the given type of cells.

Tetracycline hydrochloride-loaded electrospun nanofibers mats based on PVA and chitosan for wound dressing

Fibrous mats built from biopolymer have been extensively explored for tissue engineering due mainly to their mimic structure to the extracellular matrix. The incorporation of drug in such scaffolds represents a growing interest for control drug delivery system in order to promote the tissue repair. In the present work, we present an experimental investigation of morphological, thermal, mechanical, drug release, antibacterial and cytotoxicity properties of electrospun PVA/Chitosan and PVA/Chitosan/Tetracycline hydrochloride (TCH) mats for wound dressing. Fibrous mats with cross-linked three-dimensional nanofibers were formed from the polymer blends. A uniform incorporation of drug was achieved along the nanofibers with not significant change on the morphological and thermal properties of the mats. Furthermore, the TCH release profile with a burst delivery during the first 2h allows an effective antibacterial activity on the Gram-negative Escherichia coli as well as on the Gram-positive Staphylococci epidermidis and Staphylococcus aureus. In vitro indirect MTT assay also showed that the developed drug-loaded nanofibrous scaffolds have good cytocompatibility, which was confirmed by scratch assay, indicating that the investigated scaffold may be used as antibacterial wound dressing for healing promotion.

Injectable biomaterials: a perspective on the next wave of injectable therapeutics

We are experiencing a new wave of injectable therapeutics (namely/injectable biomaterials) to complement injectable drugs and injectable biologics, and to serve as the basis for injectable combinatorial therapeutics. Injectable biomaterials contribute to the treatment of the fluid-filled defects which often result from disease and injury, by providing the missing physical framework (i.e. the stroma). However, while injectable matrices may be necessary for the successful treatment of certain lesions, they will not likely be sufficient. Chemoattractants for select endogenous cells, or cells themselves, may need to be incorporated into the matrix prior to its injection to ensure the necessary cellular repopulation of the cavitary defect. These agents and others (drugs and biologics) delivered by the matrix represent the new category of injectable combinatorial therapeutics.

Bioactive hydrogel-nanosilica hybrid materials: a potential injectable scaffold for bone tissue engineering

Novel bioactive organic-inorganic hybrid materials that can serve as injectable hydrogel systems for bone tissue regeneration were obtained. The silica nanoparticles (SiNP) prepared in situ by the Stöber method were dispersed in collagen, collagen-chitosan or chitosan sols, which were then subsequently crosslinked. Laser scanning confocal microscopy studies, in which fluorescent SiNP were applied, and SEM images indicated that the nanosilica particles were distributed in the whole volume of the hydrogel matrix. In vitro studies on fibroblast cell viability indicated that the hybrid materials are biocompatible. The silica nanoparticles dispersed in the biopolymer matrix had a positive effect on cell viability. Studies on the mineralization process under simulated body fluid (SBF) conditions confirmed the bioactivity of prepared materials. SEM images revealed mineral phase formation in the majority of the hybrid materials developed. EDS analysis indicated that these mineral phases are mainly composed of calcium and phosphorus. The XRD studies confirmed that mineral phases formed during SBF incubation of hybrid materials based on collagen are bone-like apatite minerals. The silica nanoparticles added to the hydrogel at the stage of synthesis induced the occurrence of mineralization. This process occurs not only at the surface of the material but in its entire volume, which is important for the preparation of scaffolds for bone tissue engineering. The ability of these materials to undergo in situ gelation under physiological temperature and their bioactivity as well as biocompatibility make them interesting candidates for bioactive injectable systems.

Injectable chitosan-based scaffolds in regenerative medicine and their clinical translatability

Injectable scaffolds (IS) are polymeric solutions that are injected in vivo and undergo gelation in response to physiological or non-physiological stimuli. Interest in using IS in regenerative medicine has been increasing this past decade. IS are administered in vivo using minimally invasive surgery, which reduces hospitalization time and risk of surgical wound infection. Here, chitosan is explored as an excellent candidate for developing IS. A literature search reveals that 27% of IS publications in the past decade investigated injectable chitosan scaffolds (ICS). This increasing interest in chitosan stems from its many desirable physicochemical properties. The first section of this Progress Report is a comprehensive study of all physical, chemical, and biological stimuli that have been explored to induce ICS gelation in vivo. Second, the use of ICS is investigated in four major regenerative medicine applications, namely bone, cartilage, cardiovascular, and neural regeneration. Finally, an overall critique of the ICS literature in light of clinical translatability is presented. Even though ICS have been widely explored in the literature, very few have progressed to clinical trials. The authors discuss the current barriers to moving ICS into the clinic and provide suggestions regarding what is needed to overcome those challenges.