Aerosol deposition in the human lung periphery is increased by reduced-density gas breathing

Long-term space missions' effects on the human organism: what we do know and what requires further research

Space has always fascinated people. Many years have passed since the first spaceflight, and in addition to the enormous technological progress, the level of understanding of human physiology in space is also increasing. The presented paper aims to summarize the recent research findings on the influence of the space environment (microgravity, pressure differences, cosmic radiation, etc.) on the human body systems during short-term and long-term space missions. The review also presents the biggest challenges and problems that must be solved in order to extend safely the time of human stay in space. In the era of increasing engineering capabilities, plans to colonize other planets, and the growing interest in commercial space flights, the most topical issues of modern medicine seems to be understanding the effects of long-term stay in space, and finding solutions to minimize the harmful effects of the space environment on the human body.

A Dusty Road for Astronauts

The lunar dust problem was first formulated in 1969 with NASA's first successful mission to land a human being on the surface of the Moon. Subsequent Apollo missions failed to keep the dust at bay, so exposure to the dust was unavoidable. In 1972, Harrison Schmitt suffered a brief sneezing attack, red eyes, an itchy throat, and congested sinuses in response to lunar dust. Some additional Apollo astronauts also reported allergy-like symptoms after tracking dust into the lunar module. Immediately following the Apollo missions, research into the toxic effects of lunar dust on the respiratory system gained a lot of interest. Moreover, researchers believed other organ systems might be at risk, including the skin and cornea. Secondary effects could translocate to the cardiovascular system, the immune system, and the brain. With current intentions to return humans to the moon and establish a semi-permanent presence on or near the moon's surface, integrated, end-to-end dust mitigation strategies are needed to enable sustainable lunar presence and architecture. The characteristics and formation of Martian dust are different from lunar dust, but advances in the research of lunar dust toxicity, mitigation, and protection strategies can prove strategic for future operations on Mars.

Administration of dry powders during respiratory supports

Inhaled drugs are routinely used for the treatment of respiratory-supported patients. To date, pressurized metered dose inhalers and nebulizers are the two platforms routinely employed in the clinical setting. The scarce utilization of the dry powder inhaler (DPI) platform is partly due to the lack of in vivo data that proves optimal delivery and drug efficacy are achievable. Additionally, fitting a DPI in-line to the respiratory circuit is not as straightforward as with the other aerosol delivery platforms. Importantly, there is a common misconception that the warm and humidified inspiratory air in respiratory supports, even for a short exposure, will deteriorate powder formulation compromising its delivery and efficacy. However, some recent studies have dispelled this myth, showing successful delivery of dry powders through the humidified circuit of respiratory supports. Compared with other aerosol delivery devices, the use of DPIs during respiratory supports possesses unique advantages such as rapid delivery and high dose. In this review, we presented in vitro studies showing various setups employing commercial DPIs and effects of ventilator parameters on the aerosol delivery. Inclusion of novel DPIs was also made to illustrate characteristics of an ideal inhaler that would give high lung dose with low powder deposition loss in tracheal tubes and respiratory circuits. Clinical trials are urgently needed to confirm the benefits of administration of dry powders in ventilated patients, thus enabling translation of powder delivery into practice.

Aerosol and Droplet Risk of Common Otolaryngology Clinic Procedures

OBJECTIVES

Define aerosol and droplet risks associated with routine otolaryngology clinic procedures during the COVID-19 era.

METHODS

Clinical procedures were simulated in cadaveric heads whose oral and nasal cavities were coated with fluorescent tracer (vitamin B2) and breathing was manually simulated through retrograde intubation. A cascade impactor placed adjacent to the nares collected generated particles with aerodynamic diameters ≤14.1 µm. The 3D printed models and syringes were used to simulate middle and external ear suctioning as well as open suctioning, respectively. Provider's personal protective equipment (PPE) and procedural field contamination were also recorded for all trials using vitamin B2 fluorescent tracer.

RESULTS

The positive controls of nebulized vitamin B2 produced aerosol particles ≤3.30 µm and endonasal drilling of a 3D model generated particles ≤14.1 µm. As compared with positive controls, aerosols and small droplets with aerodynamic diameter ≤14.1 µm were not detected during rigid nasal endoscopy, flexible fiberoptic laryngoscopy, and rigid nasal suction of cadavers with simulated breathing. There was minimal to no field contamination in all 3 scenarios. Middle and external ear suctioning and open container suctioning did not result in any detectable droplet contamination. The clinic suction unit contained all fluorescent material without surrounding environmental contamination.

CONCLUSION

While patients' coughing and sneezing may create a baseline risk for providers, this study demonstrates that nasal endoscopy, flexible laryngoscopy, and suctioning inherently do not pose an additional risk in terms of aerosol and small droplet generation. An overarching generalization cannot be made about endoscopy or suctioning being an aerosol generating procedure.

LEVEL OF EVIDENCE

3.

Carrier Gases and Their Effects on Aerosol Drug Delivery

Carrier gases provide the medium for delivery of inhaled aerosol therapies. The physical properties of these gases substantially affect both fluid and aerosol mechanics in the lung. Gas density affects both the pressure/flow relationship in the airways and the extent of turbulence within the flow. These physical properties also affect the operation of some components of respiratory and aerosol drug delivery equipment. The lower resistance associated with breathing low density gases has prompted many studies of therapeutic applications. This includes the respiration of helium-oxygen gas mixtures to improve oxygenation and carbon dioxide removal, and the use of these gases to improve the delivery of inhaled medications. Results of these studies have been mixed but meta-analyses indicate a benefit of helium-oxygen respiration for croup and bronchiolitis and for bronchodilator delivery in obstructive disease. Some of the variability demonstrated in these studies is likely associated with specific technical aspects of how the gases are delivered. The utility of alternate carrier gases for aerosol delivery would be facilitated by simultaneous assessment of both aerosol deposition and clinical effect during studies. Previous successful applications may offer a basis for improved delivery system designs that fully realize the effects that might be available with these gases.

Regional Lung Deposition: In Vivo Data

The method section of this chapter on in vivo regional lung deposition highlights a nonradioactive method to measure regional deposition, which uses a photometer to quantify inhaled and exhaled particles and in that way is able to estimate the lung region from which the particles are exhaled and to what amount. The radioactive methods cover the measurement of clearance of the deposited particles as well as different imaging techniques to determine regional deposition. The result section reviews in vivo trials in human subjects. It also addresses different parameters that influence the regional deposition in the lungs: particle size, inhalation maneuver, carrier gas, disease, and inhalation device. All of these factors can affect regional deposition significantly. By choosing specific values of these parameters, it should be feasible to target different regions of the lungs for the therapy of different diseases.

The Effect of Aging on Aerosol Bolus Deposition in the Healthy Adult Lung: A 19-Year Longitudinal Study

Background: While it is recognized that peripheral lung structure and ventilation heterogeneity change with age, the effects of age on aerosol deposition in the healthy adult lung is largely unknown. Methods: A series of aerosol bolus inhalations were repeatedly performed in four healthy subjects over a period of 19 years (years = 0, 9, 15 and 19). For each series, a bolus of 1 μm particles was inhaled at penetration volumes (V_p) ranging from 200 to 1200 mL. Aerosol bolus deposition (DE), dispersion (H), and mode shift (MS) were calculated along with the rate of increase in these parameters with increasing V_p (slope-DE, slope-H, and slope-MS). Results: Slope-DE significantly increased from 0.040 ± 0.014 (mean ± standard deviation) at year 0 to 0.069 ± 0.007%/mL at year 19 (p = 0.02) with no significant difference in DE at shallow depth (V_p = 200 mL; 14% ± 4% at year 0 vs. 15% ± 7% at year 19, p = 0.25). There was no significant effect of age on either slope-H (0.44 ± 0.05 at year 0 vs. 0.47 ± 0.09 mL/mL at year 19, p = 0.6) or dispersion at shallow depth (192 ± 36 mL at year 0 vs. 220 ± 54 mL at year 19, p = 0.2). Slope-MS became significantly more negative with increasing age (-0.096 ± 0.044 at year 0 vs. -0.171 ± 0.027 mL/mL at year 19, p = 0.001) with no significant difference in MS at shallow depth (12 ± 10 at year 0 vs. 7 ± 15 mL at year 19, p = 0.3). Conclusions: These data suggest that (1) peripheral deposition increases with aging in the healthy lung, likely as a result of increasing closing volume with age; (2) alterations in the mechanical properties of healthy adult lungs with age occur uniformly; and (3) the significant increase in the magnitude of MS-slope with age is likely due to the concomitant increase in peripheral deposition and possible alterations in flow sequencing.

Deposition studies of aerosol delivery by nasal cannula to infants

AIM

Nasal cannulas are used to provide oxygen support for infants and have been considered as a means for delivering aerosols to the lungs. To measure mucociliary clearance in the lungs of infants with congenital heart defects, we delivered radiopharmaceutical aerosols via a nasal cannula. Here we report on the pulmonary and nasal deposition of these aerosols.

METHOD

A total of 18 infants (median age = 26 days; quartiles = 11-74 days) performed clearance measurements soon before or after corrective cardiac surgery. The regional aerosol deposition was assessed using gamma camera imaging.

RESULTS

Cannula flow rate significantly affected pulmonary dosing. Flow rates useful for oxygen support were associated with low pulmonary deposition (2 L/min; mean, 4.5% of deposited dose; range, 2%-9%; n = 7) and high nasal deposition. Much lower cannula flow rates increased the pulmonary deposition (0.2 L/min; mean, 33.5% of deposited dose; range, 15%-51%; n = 5; P = 0.005 vs 2 L/min). The ratio of nose/lung dosing was approximately 26:1 at 2 L/min and 2:1 at 0.2 L/min. Bench studies demonstrated cannula output rates of 10.2 ± 1.7% (2 L/min) and 3.3 ± 0.4% (0.2 L/min) of the loaded nebulizer dose during a 2-minute delivery. Combining in vitro and in vivo results, we estimate that 0.46% of the loaded nebulizer dose reaches the lungs at 2 L/min vs 1.10% at 0.2 L/min during a 2-minute delivery.

CONCLUSION

With the delivery system used here, pulmonary aerosol delivery via nasal cannula was very inefficient at the flow rates required to provide oxygen support. Even at low flows, nasal deposition was substantial and local toxicity must be considered.

Particulate matter air pollution and respiratory impact on humans and animals

Air pollution is now fully acknowledged to be a public health problem and a social issue. Particulate matter (PM) concentration has been linked with several clinical manifestations of pulmonary and cardiovascular diseases and is associated with morbidity and mortality induced by respiratory diseases both in human and animals. Current research on airborne particle-induced health effects investigates the critical characteristics of particulate matter that determine their biological effects. Scientific evidence assessed that the size of the airborne particles and their surface area determine the potential to elicit inflammatory injury, oxidative damage, and other biological effects. Thus, the present review paper aims to summarize the current evidences and findings on the effect of air pollution on lung function in both humans and animals.

Nervous System Injury in Response to Contact With Environmental, Engineered and Planetary Micro- and Nano-Sized Particles

Nerve cells take a special place among other cells in organisms because of their unique function mechanism. The plasma membrane of nerve cells from the one hand performs a classical barrier function, thereby being foremost targeted during contact with micro- and nano-sized particles, and from the other hand it is very intensively involved in nerve signal transmission, i.e., depolarization-induced calcium-dependent compound exocytosis realized via vesicle fusion following by their retrieval and calcium-independent permanent neurotransmitter turnover via plasma membrane neurotransmitter transporters that utilize Na+/K+ electrochemical gradient as a driving force. Worldwide traveling air pollution particulate matter is now considered as a possible trigger factor for the development of a variety of neuropathologies. Micro- and nano-sized particles can reach the central nervous system during inhalation avoiding the blood-brain barrier, thereby making synaptic neurotransmission extremely sensitive to their influence. Neurosafety of environmental, engineered and planetary particles is difficult to predict because they possess other features as compared to bulk materials from which the particles are composed of. The capability of the particles to absorb heavy metals and organic neurotoxic molecules from the environment, and moreover, spontaneously interact with proteins and lipids in organisms and form biomolecular corona can considerably change the particles' features. The absorption capability occasionally makes them worldwide traveling particulate carriers for delivery of environmental neurotoxic compounds to the brain. Discrepancy of the experimental data on neurotoxicity assessment of micro- and nano-sized particles can be associated with a variability of systems, in which neurotoxicity was analyzed and where protein components of the incubation media forming particle biocorona can significantly distort and even eliminate factual particle effects. Specific synaptic mechanisms potentially targeted by environmental, engineered and planetary particles, general principles of particle neurosafety and its failure were discussed. Particle neurotoxic potential depends on their composition, size, shape, surface properties, stability in organisms and environment, capability to absorb neurotoxic compounds, form dust and interrelate with different biomolecules. Changes in these parameters can break primary particle neurosafety.

Pulmonary Delivery of Therapeutic and Diagnostic Gases

The 21st Congress for the International Society for Aerosols in Medicine included, for the first time, a session on Pulmonary Delivery of Therapeutic and Diagnostic Gases. The rationale for such a session within ISAM is that the pulmonary delivery of gaseous drugs in many cases targets the same therapeutic areas as aerosol drug delivery, and is in many scientific and technical aspects similar to aerosol drug delivery. This article serves as a report on the recent ISAM congress session providing a synopsis of each of the presentations. The topics covered are the conception, testing, and development of the use of nitric oxide to treat pulmonary hypertension; the use of realistic adult nasal replicas to evaluate the performance of pulsed oxygen delivery devices; an overview of several diagnostic gas modalities; and the use of inhaled oxygen as a proton magnetic resonance imaging (MRI) contrast agent for imaging temporal changes in the distribution of specific ventilation during recovery from bronchoconstriction. Themes common to these diverse applications of inhaled gases in medicine are discussed, along with future perspectives on development of therapeutic and diagnostic gases.

Aerosol therapy through high flow nasal cannula in pediatric patients

INTRODUCTION

High flow nasal cannula (HFNC) is increasingly used in pediatric patients suffering from respiratory failure. In some disease processes, patients may also benefit from aerosol therapy. Therefore, the use of HFNC to deliver aerosolized medications is a convenient and attractive option. Areas covered: This review aims to appraise available evidence concerning the efficiency of aerosol nebulized therapy delivery using HFNC in pediatric patients. Expert commentary: Delivery of aerosol particles is a very complex process and depends on the use of oxygen vs. heliox, nebulizer type and position within the HFNC circuit, patient's breathing effort and pattern, and more importantly cannula size and flow rates. Current in vitro evidence suggests the amount of aerosol delivery is likely to be very low at high flows. Clinical studies are limited in pediatric patients and given the limited clinical data, it is not possible to make recommendations for or against aerosol delivery through HFNC for pediatric patients.

Monitoring the Inhalation Flow Rate of Nebulized Aerosols Using an Ultrasonic Flow Meter: In Vitro Assessment

BACKGROUND

The measurement of aerosol flow rates without obscuration of the flow is of particular concern with in vivo lung deposition studies, where precise knowledge of aerosol particle size distributions is a necessary requirement for the development of predictive correlations. This study examines the utility of an ultrasonic flow meter for such measurements and determines if a valved system can be attached to the flow meter for sampling exhaled aerosols.

METHODS

The flow rate across a D-30 flow meter was compared with and without nebulization of 0.9% saline aerosols from a PARI LC Sprint nebulizer. Particle size distributions of the nebulized aerosol before and after adding the D-30 flow meter and duckbill valve were measured using a Spraytec laser diffraction system. Finally, the ability of the Thor D-30 to capture a realistic breathing profile was assessed.

RESULTS

The mean ± standard error flow rates measured by the D-30 flow meter with and without nebulization were 10.4 ± 0.1 versus 10.4 ± 0.1 L/min, 66.4 ± 0.1 versus 67.2 ± 0.1 L/min, and 89.9 ± 0.1 versus 91.4 ± 0.1 L/min. The D-30 flow meter did not considerably affect the volumetric median diameter (VMD) of the aerosols, while the VMD reduced slightly by 0.65 μm at 10 L/min and 0.69 μm at 72 L/min upon the inclusion of a duckbill valve. Time-weighted average inhalation flow rates measured by D-30 flow meters placed upstream and downstream of the one-way valve agreed well, 31.9 versus 32.6 L/min, respectively.

CONCLUSIONS

The D-30 flow meter can be used to accurately measure inhalation flow rates of nebulized aerosols without significantly impacting particle size distributions, and one-way duckbill valves can be used to isolate the inhalation portion of a breathing pattern to facilitate collection of exhaled doses.

Total and regional deposition of inhaled aerosols in supine healthy subjects and subjects with mild-to-moderate COPD

Despite substantial development of sophisticated subject-specific computational models of aerosol transport and deposition in human lungs, experimental validation of predictions from these new models is sparse. We collected aerosol retention and exhalation profiles in seven healthy volunteers and six subjects with mild-to-moderate COPD (FEV1 = 50-80%predicted) in the supine posture. Total deposition was measured during continuous breathing of 1 and 2.9 μm-diameter particles (tidal volume of 1 L, flow rate of 0.3 L/s and 0.75 L/s). Bolus inhalations of 1 μm particles were performed to penetration volumes of 200, 500 and 800 mL (flow rate of 0.5 L/s). Aerosol bolus dispersion (H), deposition, and mode shift (MS) were calculated from these data. There was no significant difference in total deposition between healthy subjects and those with COPD. Total deposition increased with increasing particle size and also with increasing flow rate. Similarly, there was no significant difference in aerosol bolus deposition between subject groups. Yet, the rate of increase in dispersion and of decrease in MS with increasing penetration volume was higher in subjects with COPD than in healthy volunteers (H: 0.798 ± 0.205 vs. 0.527 ± 0.122 mL/mL, p=0.01; MS: -0.271±0.129 vs. -0.145 ± 0.076 mL/mL, p=0.05) indicating larger ventilation inhomogeneities (based on H) and increased flow sequencing (based on MS) in the COPD than in the healthy group. In conclusion, in the supine posture, deposition appears to lack sensitivity for assessing the effect of lung morphology and/or ventilation distribution alteration induced by mild-to-moderate lung disease on the fate of inhaled aerosols. However, other parameters such as aerosol bolus dispersion and mode shift may be more sensitive parameters for evaluating models of lungs with moderate disease.

Bridging the Gap Between Science and Clinical Efficacy: Physiology, Imaging, and Modeling of Aerosols in the Lung

Development of a new drug for the treatment of lung disease is a complex and time consuming process involving numerous disciplines of basic and applied sciences. During the 2015 Congress of the International Society for Aerosols in Medicine, a group of experts including aerosol scientists, physiologists, modelers, imagers, and clinicians participated in a workshop aiming at bridging the gap between basic research and clinical efficacy of inhaled drugs. This publication summarizes the current consensus on the topic. It begins with a short description of basic concepts of aerosol transport and a discussion on targeting strategies of inhaled aerosols to the lungs. It is followed by a description of both computational and biological lung models, and the use of imaging techniques to determine aerosol deposition distribution (ADD) in the lung. Finally, the importance of ADD to clinical efficacy is discussed. Several gaps were identified between basic science and clinical efficacy. One gap between scientific research aimed at predicting, controlling, and measuring ADD and the clinical use of inhaled aerosols is the considerable challenge of obtaining, in a single study, accurate information describing the optimal lung regions to be targeted, the effectiveness of targeting determined from ADD, and some measure of the drug's effectiveness. Other identified gaps were the language and methodology barriers that exist among disciplines, along with the significant regulatory hurdles that need to be overcome for novel drugs and/or therapies to reach the marketplace and benefit the patient. Despite these gaps, much progress has been made in recent years to improve clinical efficacy of inhaled drugs. Also, the recent efforts by many funding agencies and industry to support multidisciplinary networks including basic science researchers, R&D scientists, and clinicians will go a long way to further reduce the gap between science and clinical efficacy.

Regional Ventilation and Aerosol Deposition with Helium-Oxygen in Bronchoconstricted Asthmatic Lungs

BACKGROUND

Theoretical models suggest that He-O2 as carrier gas may lead to more homogeneous ventilation and aerosol deposition than air. However, these effects have not been clinically consistent and it is unclear why subjects may or may not respond to the therapy. Here we present 3D-imaging data of aerosol deposition and ventilation distributions from subjects with asthma inhaling He-O2 as carrier gas. The data are compared with those that we previously obtained from a similar group of subjects inhaling air.

METHODS

Subjects with mild-to-moderate asthma were bronchoconstricted with methacholine and imaged with PET-CT while inhaling aerosol carried with He-O2. Mean-normalized-values of lobar specific ventilation sV* and deposition sD* were derived and the factors affecting the distribution of sD* were evaluated along with the effects of breathing frequency (f) and regional expansion (FVOL).

RESULTS

Lobar distributions of sD* and sV* with He-O2 were not statistically different from those previously measured with air. However, with He-O2 there was a larger number of lobes having sV* and sD* closer to unity and, in those subjects with uneven deposition distributions, the correlation of sD* with sV* was on average higher (p < 0.05) in He-O2 (0.84 ± 0.8) compared with air (0.55 ± 0.28). In contrast with air, where the frequency of breathing during nebulization was associated with the degree of sD*-sV* correlation, with He-O2 there was no association. Also, the modulation of f on the correlation between FVOL and sD*/sV* in air, was not observed in He-O2.

CONCLUSION

There were no differences in the inter-lobar heterogeneity of sD* or sV* in this group of mild asthmatic subjects breathing He-O2 compared with patients previously breathing air. Future studies, using these personalized 3D data sets as input to CFD models, are needed to understand if, and for whom, breathing He-O2 during aerosol inhalation may be beneficial.

Secretory IgA from submucosal glands does not compensate for its airway surface deficiency in chronic obstructive pulmonary disease

Secretory immunoglobulin A (SIgA) reaches the airway lumen by local transcytosis across airway epithelial cells or with tracheobronchial submucosal gland secretions. In chronic obstructive pulmonary disease (COPD), deficiency of SIgA on the airway surface has been reported. However, reduction of SIgA levels in sputum and bronchoalveolar lavage (BAL) fluid has not been consistently observed. To explain this discrepancy, we analyzed BAL fluid and lung tissue from patients with COPD and control subjects. Immunohistochemical analysis of large and small airways of COPD patients showed that MUC5AC is the predominant mucin expressed by airway epithelial cells, whereas MUC5B is expressed in submucosal glands of large airways. Dual immunostaining with anti-IgA and anti-MUC5B antibodies showed reduction of IgA on the airway surface as well as accumulation of IgA within MUC5B-positive luminal mucus plugs, suggesting that luminal SIgA originates from submucosal glands in COPD patients. We found that the concentration of SIgA in BAL is inversely correlated with forced expiratory volume in 1 s (FEV₁) in COPD, but that the ratio of SIgA/MUC5B is a better predictor of FEV₁, particularly in patients with moderate COPD. Together, these findings suggest that SIgA production by submucosal glands, which are expanded in COPD, is insufficient to compensate for reduced SIgA transcytosis by airway epithelial cells. Localized SIgA deficiency on the surface of small airways is associated with COPD progression and represents a potential new therapeutic target in COPD.

Comparative Risks of Aldehyde Constituents in Cigarette Smoke Using Transient Computational Fluid Dynamics/Physiologically Based Pharmacokinetic Models of the Rat and Human Respiratory Tracts

Computational fluid dynamics (CFD) modeling is well suited for addressing species-specific anatomy and physiology in calculating respiratory tissue exposures to inhaled materials. In this study, we overcame prior CFD model limitations to demonstrate the importance of realistic, transient breathing patterns for predicting site-specific tissue dose. Specifically, extended airway CFD models of the rat and human were coupled with airway region-specific physiologically based pharmacokinetic (PBPK) tissue models to describe the kinetics of 3 reactive constituents of cigarette smoke: acrolein, acetaldehyde and formaldehyde. Simulations of aldehyde no-observed-adverse-effect levels for nasal toxicity in the rat were conducted until breath-by-breath tissue concentration profiles reached steady state. Human oral breathing simulations were conducted using representative aldehyde yields from cigarette smoke, measured puff ventilation profiles and numbers of cigarettes smoked per day. As with prior steady-state CFD/PBPK simulations, the anterior respiratory nasal epithelial tissues received the greatest initial uptake rates for each aldehyde in the rat. However, integrated time- and tissue depth-dependent area under the curve (AUC) concentrations were typically greater in the anterior dorsal olfactory epithelium using the more realistic transient breathing profiles. For human simulations, oral and laryngeal tissues received the highest local tissue dose with greater penetration to pulmonary tissues than predicted in the rat. Based upon lifetime average daily dose comparisons of tissue hot-spot AUCs (top 2.5% of surface area-normalized AUCs in each region) and numbers of cigarettes smoked/day, the order of concern for human exposures was acrolein > formaldehyde > acetaldehyde even though acetaldehyde yields were 10-fold greater than formaldehyde and acrolein.

Aerosol deposition in the human lung in reduced gravity

The deposition of aerosol in the human lung occurs mainly through a combination of inertial impaction, gravitational sedimentation, and diffusion. For 0.5- to 5-μm-diameter particles and resting breathing conditions, the primary mechanism of deposition in the intrathoracic airways is sedimentation, and therefore the fate of these particles is markedly affected by gravity. Studies of aerosol deposition in altered gravity have mostly been performed in humans during parabolic flights in both microgravity (μG) and hypergravity (~1.6G), where both total deposition during continuous aerosol mouth breathing and regional deposition using aerosol bolus inhalations were performed with 0.5- to 3-μm particles. Although total deposition increased with increasing gravity level, only peripheral deposition as measured by aerosol bolus inhalations was strongly dependent on gravity, with central deposition (lung depth<200 mL) being similar between gravity levels. More recently, the spatial distribution of coarse particles (mass median aerodynamic diameter≈5 μm) deposited in the human lung was assessed using planar gamma scintigraphy. The absence of gravity caused a smaller portion of 5-μm particles to deposit in the lung periphery than in the central region, where deposition occurred mainly in the airways. Indeed, 5-μm-diameter particles deposit either by inertial impaction, a mechanism most efficient in the large and medium-sized airways, or by gravitational sedimentation, which is most efficient in the distal lung. On the contrary, for fine particles (~1 μm), both aerosol bolus inhalations and studies in small animals suggest that particles deposit more peripherally in μG than in 1G, beyond the reach of the mucociliary clearance system.

Controlled, parametric, individualized, 2D and 3D imaging measurements of aerosol deposition in the respiratory tract of healthy human volunteers: in vivo data analysis

BACKGROUND

To provide a validation dataset for aerosol deposition modeling, a clinical trial was performed in which the inhalation parameters and the inhaled aerosol were controlled or characterized.

METHODS

Eleven, healthy, never-smokers, male participants completed the study. Each participant performed two inhalations of (99m)Tc-labeled aerosol from a vibrating mesh nebulizer, which differed by a single controlled parameter (aerosol particle size: "small" or "large"; inhalation: "deep" or "shallow"; carrier gas: air or a helium-oxygen mix). The deposition measurements were made by planar imaging, and single photon emission computed tomography-computed tomography (SPECT-CT).

RESULTS

The difference between the mean activity measured by two-dimensional imaging and that delivered from the nebulizer was 2.7%, which was not statistically significant. The total activity deposited was significantly lower in the left lung than in the right lung (p<0.0001) with a mean ratio (left/right) of 0.87±0.1 standard deviation (SD). However, when normalized to lung air volume, the left lung deposition was significantly higher (p=0.0085) with a mean ratio of 1.08±0.12 SD. A comparison of the three-dimensional central-to-peripheral (nC/P3D) ratio showed that it was significantly higher for the left lung (p<0.0001) with a mean ratio (left/right) of 1.36±0.20 SD. The effect of particle size was statistically significant on the nC/P3D ratio (p=0.0014), extrathoracic deposition (p=0.0037), and 24-hr clearance (p<0.0001), contrary to the inhalation parameters, which showed no effect.

CONCLUSIONS

This article presents the results of an analysis of the in vivo deposition data, obtained in a clinical study designed to provide data for model validation. This study has demonstrated the value of SPECT imaging over planar, the influence of particle size on regional distribution within the lung, and differences in deposition between the left and right lungs.

Using helium-oxygen to improve regional deposition of inhaled particles: mechanical principles

BACKGROUND

Helium-oxygen has been used for decades as a respiratory therapy conjointly with aerosols. It has also been shown under some conditions to be a means to provide more peripheral, deeper, particle deposition for inhalation therapies. Furthermore, we can also consider deposition along parallel paths that are quite different, especially in a heterogeneous pathological lung. It is in this context that it is hypothesized that helium-oxygen can improve regional deposition, leading to more homogeneous deposition by increasing deposition in ventilation-deficient lung regions.

METHODS

Analytical models of inertial impaction, sedimentation, and diffusion are examined to illustrate the importance of gas property values on deposition distribution through both fluid mechanics- and particle mechanics-based mechanisms. Also considered are in vitro results from a bench model for a heterogeneously obstructed lung. In vivo results from three-dimensional (3D) imaging techniques provide visual examples of changes in particle deposition patterns in asthmatics that are further analyzed using computational fluid dynamics (CFD).

RESULTS AND CONCLUSIONS

Based on analytical modeling, it is shown that deeper particle deposition is expected when breathing helium-oxygen, as compared with breathing air. A bench model has shown that more homogeneous ventilation distribution is possible breathing helium-oxygen in the presence of heterogeneous obstructions representative of central airway obstructions. 3D imaging of asthmatics has confirmed that aerosol delivery with a helium-oxygen carrier gas results in deeper and more homogeneous deposition distributions. CFD results are consistent with the in vivo imaging and suggest that the mechanics of gas particle interaction are the source of the differences seen in deposition patterns. However, intersubject variability in response to breathing helium-oxygen is expected, and an example of a nonresponder is shown where regional deposition is not significantly changed.

Neurotoxic potential of lunar and martian dust: influence on em, proton gradient, active transport, and binding of glutamate in rat brain nerve terminals

The harmful effects of lunar dust (LD) on directly exposed tissues are documented in the literature, whereas researchers are only recently beginning to consider its effects on indirectly exposed tissues. During inhalation, nano-/microsized particles are efficiently deposited in nasal, tracheobronchial, and alveolar regions and transported to the central nervous system. The neurotoxic potential of LD and martian dust (MD) has not yet been assessed. Glutamate is the main excitatory neurotransmitter involved in most aspects of normal brain function, whereas disturbances in glutamate homeostasis contribute to the pathogenesis of major neurological disorders. The research was focused on the analysis of the effects of LD/MD simulants (JSC-1a/JSC, derived from volcanic ash) on the key characteristics of glutamatergic neurotransmission. The average size of LD and MD particles (even minor fractions) before and after sonication was determined by dynamic light scattering. With the use of radiolabeled l-[(14)C]glutamate, it was shown that there is an increase in l-[(14)C]glutamate binding to isolated rat brain nerve terminals (synaptosomes) in low [Na(+)] media and at low temperature in the presence of LD. MD caused significantly lesser changes under the same conditions, whereas nanoparticles of magnetite had no effect at all. Fluorimetric experiments with potential-sensitive dye rhodamine 6G and pH-sensitive dye acridine orange showed that the potential of the plasma membrane of the nerve terminals and acidification of synaptic vesicles were not altered by LD/MD (and nanoparticles of magnetite). Thus, the unique effect of LD to increase glutamate binding to the nerve terminals was shown. This can have deleterious effects on extracellular glutamate homeostasis in the central nervous system and cause alterations in the ambient level of glutamate, which is extremely important for proper synaptic transmission. During a long-term mission, a combination of constant irritation due to dust particles, inflammation, stress, low gravity and microgravity, radiation, UV, and so on may consequently change the effects of the dust and aggravate neurological consequences.

Evaluation of lung function and deposition of aerosolized bronchodilators carried by heliox associated with positive expiratory pressure in stable asthmatics: a randomized clinical trial

While administration of medical aerosols with heliox and positive airway pressure are both used clinically to improve aerosol delivery, few studies have differentiated their separate roles in treatment of asthmatics. The aim of this randomized, double blinded study is to differentiate the effect of heliox and oxygen with and without positive expiratory pressure (PEP), on delivery of radiotagged inhaled bronchodilators on pulmonary function and deposition in asthmatics. 32 patients between 18 and 65 years of age diagnosed with stable moderate to severe asthma were randomly assigned into four groups: (1) Heliox + PEP (n = 6), (2) Oxygen + PEP (n = 6), (3) Heliox (n = 11) and (4) Oxygen without PEP (n = 9). Each group received 1 mg of fenoterol and 2 mg of ipratropium bromide combined with 25 mCi (955 Mbq) of Technetium-99m and 0.9% saline to a total dose volume of 3 mL placed in a Venticis II nebulizer attached to a closed, valved mask with PEP of 0 or 10 cm H2O. Both gas type and PEP level were blinded to the investigators. Images were acquired with a single-head scintillation camera with the longitudinal and transverse division of the right lung as regions of interest (ROIs). While all groups responded to bronchodilators, only group 1 showed increase in FEV1%predicted and IC compared to the other groups (p < 0.04). When evaluating the ROI in the vertical gradient we observed higher deposition in the middle and lower third in groups 1 (p = 0.02) and 2 (p = 0.01) compared to group 3. In the horizontal gradient, a higher deposition in the central region in groups 1 (p = 0.03) and 2 (p = 0.02) compared to group 3 and intermediate region of group 2 compared to group 3. We conclude that aerosol deposition was higher in groups with PEP independent of gas used, while bronchodilator response with Heliox + PEP improved FEV1 % and IC compared to administration with Oxygen, Oxygen with PEP and Heliox alone. Trial registration NCT01268462.

Methods for evaluation of helium/oxygen delivery through non-rebreather facemasks

BACKGROUND

Inhalation of low-density helium/oxygen mixtures has been used both to lower the airway resistance and work of breathing of patients with obstructive lung disease and to transport pharmaceutical aerosols to obstructed lung regions. However, recent clinical investigations have highlighted the potential for entrainment of room air to dilute helium/oxygen mixtures delivered through non-rebreather facemasks, thereby increasing the density of the inhaled gas mixture and limiting intended therapeutic effects. This article describes the development of benchtop methods using face models for evaluating delivery of helium/oxygen mixtures through facemasks.

METHODS

Four face models were used: a flat plate, a glass head manikin, and two face manikins normally used in life support training. A mechanical test lung and ventilator were employed to simulate spontaneous breathing during delivery of 78/22 %vol helium/oxygen through non-rebreather facemasks. Based on comparison of inhaled helium concentrations with available clinical data, one face model was selected for measurements made during delivery of 78/22 or 65/35 %vol helium/oxygen through three different masks as tidal volume varied between 500 and 750 ml, respiratory rate between 14 and 30 breaths/min, the inspiratory/expiratory ratio between 1/2 and 1/1, and the supply gas flow rate between 4 and 15 l/min. Inhaled helium concentrations were measured both with a thermal conductivity analyzer and using a novel flow resistance method.

RESULTS

Face models borrowed from life support training provided reasonably good agreement with available clinical data. After normalizing for the concentration of helium in the supply gas, no difference was noted in the extent of room air entrainment when delivering 78/22 versus 65/35 %vol helium/oxygen. For a given mask fitted to the face in a reproducible manner, delivered helium concentrations were primarily determined by the ratio of supply gas flow rate to simulated patient minute ventilation, with the inspiratory/expiratory ratio playing a secondary role. However, the functional dependence of helium concentration on these two ratios depended on the mask design.

CONCLUSIONS

Large differences in mask performance were identified. With continued refinement, the availability of reliable benchtop methods is expected to assist in the development and selection of patient interfaces for delivery of helium/oxygen and other medical gases.

Aerosol deposition in health and disease

The success of inhalation therapy is not only dependent upon the pharmacology of the drugs being inhaled but also upon the site and extent of deposition in the respiratory tract. This article reviews the main mechanisms affecting the transport and deposition of inhaled aerosol in the human lung. Aerosol deposition in both the healthy and diseased lung is described mainly based on the results of human studies using nonimaging techniques. This is followed by a discussion of the effect of flow regime on aerosol deposition. Finally, the link between therapeutic effects of inhaled drugs and their deposition pattern is briefly addressed. Data show that total lung deposition is a poor predictor of clinical outcome, and that regional deposition needs to be assessed to predict therapeutic effectiveness. Indeed, spatial distribution of deposited particles and, as a consequence, drug efficiency is strongly affected by particle size. Large particles (>6 μm) tend to mainly deposit in the upper airway, limiting the amount of drugs that can be delivered to the lung. Small particles (<2 μm) deposit mainly in the alveolar region and are probably the most apt to act systemically, whereas the particle in the size range 2-6 μm are be best suited to treat the central and small airways.

Aerosol therapy in patients receiving noninvasive positive pressure ventilation

In selected patients, noninvasive positive pressure ventilation (NIPPV) with a facemask is now commonly employed as the first choice for providing mechanical ventilation in the intensive care unit (ICU). Aerosol therapy for treatment of acute or acute-on-chronic respiratory failure in this setting may be delivered by pressurized metered-dose inhaler (pMDI) with a chamber spacer and facemask or nebulizer and facemask. This article reviews the host of factors influencing aerosol delivery with these devices during NIPPV. These factors include (1) the type of ventilator, (2) mode of ventilation, (3) circuit conditions, (4) type of interface, (5) type of aerosol generator, (6) drug-related factors, (7) breathing parameters, and (8) patient-related factors. Despite the impediments to efficient aerosol delivery because of continuous gas flow, high inspiratory flow rates, air leaks, circuit humidity, and patient-ventilator asynchrony, significant therapeutic effects are achieved after inhaled bronchodilator administration to patients with asthma and chronic obstructive pulmonary disease. Similarly to invasive mechanical ventilation, careful attention to the technique of drug administration is required to optimize therapeutic effects of inhaled therapies during NIPPV. Assessment of the patient's ability to tolerate a facemask, the level of respiratory distress, hemodynamic status, and synchronization of aerosol generation with inspiratory airflow are important factors contributing to the success of aerosol delivery during NIPPV. Further research into novel delivery methods, such as the use of NIPPV with nasal cannulae, could enhance the efficiency, ease of use, and reproducibility of inhalation therapy during noninvasive ventilation.

In vitro comparison of heliox and oxygen in aerosol delivery using pediatric high flow nasal cannula

Drug administration via high flow nasal cannula (HFNC) has been described in pediatrics but the amount of albuterol delivery with an HFNC is not known. The purpose of this study is to quantify aerosol delivery with heliox and oxygen (O(2)) in a model of pediatric ventilation. A vibrating mesh nebulizer (Aeroneb Solo, Aerogen) was placed on the inspiratory inlet of a heated humidifier and heated wire circuit attached to a pediatric nasal cannula (Optiflow, Fisher & Paykel). Breathing parameters were tidal volume (V(t)) 100 ml, respiratory rate (RR) 20/min, and I-time of 1 sec. Albuterol sulfate (2.5 mg/3 ml) was administered through a pediatric HFNC with O(2) (100%) and heliox (80/20% mixture). A total of 12 runs, using O(2) and heliox were conducted at 3 and 6 L/min (n = 3). Drug was collected on an absolute filter, eluted and measured using spectrophotometry. The percent inhaled dose (mean ± SD) was similar with heliox and O(2) at 3 L/min (11.41 ± 1.54 and 10.65 ± 0.51, respectively; P = 0.465). However at 6 L/min drug deposition was ≥ 2-fold greater with heliox (5.42 ± 0.54) than O(2) (1.95 ± 0.50; P = 0.01). Using a pediatric model of HFNC, reducing delivered flow from 6 to 3 L/min increased inhaled albuterol delivery ≥ 2-fold but eliminated the increase in inhaled drug efficiency associated with heliox.