Nanoclay-enriched poly(ɛ-caprolactone) electrospun scaffolds for osteogenic differentiation of human mesenchymal stem cells

Hydroxyapatite Chitosan Gradient Pore Scaffold Activates Oxidative Phosphorylation Pathway to Induce Bone Formation

BACKGROUND

In this study, we prepared a porous gradient scaffold with hydroxyapatite microtubules (HAMT) and chitosan (CHS) and investigated osteogenesis induced by these scaffolds.

METHODS

The arrangement of wax balls in the mold can control the size and distribution of the pores of the scaffold, and form an interconnected gradient pore structure. The scaffolds were systematically evaluated in vitro and in vivo for biocompatibility, biological activity, and regulatory mechanisms.

RESULTS

The porosity of the four scaffolds was more than 80%. The 50% and 70% HAMT-CHS scaffolds formed an excellent gradient pore structure, with interconnected pores. Furthermore, the 70% HAMT-CHS scaffold showed better anti-compressive deformation ability. In vitro experiments indicated that the scaffolds had good biocompatibility, promoted the expression of osteogenesis-related genes and proteins, and activated the oxidative phosphorylation pathway to promote bone regeneration. Eight weeks after implanting the HAMT-CHS scaffold in rat skull defects, new bone formation was observed in vivo by micro-computed tomographic (CT) staining. The obtained data were statistically analyzed, and the p-value < 0.05 was statistically significant.

CONCLUSION

HAMT-CHS scaffolds can accelerate osteogenesis in bone defects, potentially through the activation of the oxidative phosphorylation pathway. These results highlight the potential therapeutic application of HAMT-CHS scaffolds.

Mechanobiological enhancement of electrospun PCL/nHA membranes for guided tissue regeneration applications

This study aims to investigate the effects of adding nano-hydroxyapatite (nHA) to electrospun polycaprolactone (PCL) membranes for use in dental root regeneration. Porous membranes containing varying amounts of nHA (0, 1, 1.5, and 2.5 wt%) were fabricated using the electrospinning method. The physicochemical, mechanical, and biological properties of the membranes were evaluated. The synthesized nHA particles had an average size of 52 nm. Electrospun membranes exhibited uniform fibrous morphology with porosities ranging from 56% to 86%. Cyclic thermal stress (5°C-50°C) improved the mechanical properties of the composite membranes, resulting in a decrease in ultimate tensile strength (UTS) for pristine PCL from 3 ± 0.12 MPa to 1.7 ± 0.11 MPa, while the UTS for PCL membranes containing 1.5% nHA increased from 3.3 ± 0.30 MPa to 4.18 ± 0.28 MPa. In vitro bioactivity in simulated body fluid (SBF) showed enhanced apatite formation, particularly after 21 and 28 days. Cytotoxicity assays with MG-63 osteoblast-like cells demonstrated good biological performance. The incorporation of nHA not only improved the mechanical properties but also enhanced the bioactivity and cytocompatibility of the electrospun PCL membranes, making them promising candidates for guided tissue regeneration (GTR) applications.

3D-Printed PCL-Based Scaffolds with High Nanosized Synthetic Smectic Clay Content: Fabrication, Mechanical Properties, and Biological Evaluation for Bone Tissue Engineering

Background

The 3D printing of macro- and mesoporous biomimetic grafts composed of polycaprolactone (PCL) infused with nanosized synthetic smectic clay is a promising innovation in biomaterials for bone tissue engineering (BTE). The main challenge lies in achieving a uniform distribution of nanoceramics across low to high concentrations within the polymer matrix while preserving mechanical properties and biological performance essential for successful osseointegration.

Methods

This study utilized 3D printing to fabricate PCL scaffolds enriched with nanosized synthetic smectic clay (LAP) to evaluate its effects on structural, chemical, thermal, mechanical, and degradative properties, with a focus on in vitro biological performance and non-toxicity. Scaffolds were created with varying proportions of PCL and LAP. Comprehensive characterization included scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), mechanical testing, swelling analysis, and degradation studies. Biological performance was assessed through MTT assays (cell viability), alkaline phosphatase activity, histological analysis, and Raman spectroscopy, highlighting the scaffolds' biocompatibility and potential applications in regenerative medicine.

Results

The developed inks demonstrated excellent injectability, and the 3D-printed PCL/LAP scaffolds exhibited a microporous and rough structure, good structural fidelity, low degradability, thermal stability, and sufficient mechanical strength across all formulations. Intrinsic properties of the scaffolds revealed no cytotoxicity while enhancing bioactivity and promoting in vitro mineralization when cultured with mesenchymal stem cells in all analyzed groups. Notably, the high concentration of LAP within the PCL matrices did not induce in vitro cytotoxicity but rather stimulated in vitro mineralization and differentiation.

Conclusion

This study demonstrated the feasibility of 3D printing PCL/LAP scaffolds with high concentrations of nanoceramics. Both in vitro and in vivo assays validated the regenerative potential of these scaffolds, emphasizing their efficacy as a promising approach for developing advanced biomimetic grafts.

Electrospun PCL/Alginate/Nanoclay Nerve Conduit with Olfactory Ectomesenchymal Stem Cells for Nerve Regeneration

Biocompatible and biodegradable nerve growth conduits (NGCs) provide a promising alternative to conventional nerve grafting for peripheral nerve regeneration. Incorporating nanoclay (NC) has been shown to increase the hydrophilicity and flexibility of polymeric scaffolds. In the present study, poly caprolactone-alginate (PCL-ALG) conduits with varying percentages of NC (0.1%, 0.2%, and 0.5%) were fabricated using the electrospinning technique. The conduit containing 0.5% NC showed a greater increase in elongation (33%) and porosity, reaching 95% with the lowest contact angle (10°). For in vitro, human olfactory ectomesenchymal stem cells (OE-MSCs) were used as a favorable choice for neuronal differentiation owing to the origin from the neural crest. The viability and proliferation of OE-MSCs were maintained after 5 days on scaffolds with 0.5% NC, as confirmed by the MTT assay, cell adhesion analysis, and live/dead staining. Furthermore, the impact of 0.5% PCL-ALG-NC on the paracrine activity of OE-MSCs was studied for a period of 7 days. Our results indicated that human OE-MSCs, when cocultured with PC12 cells on NGC, have the capability to release nerve growth factor levels of up to 1392.83 pg/mL. In summary, the electrospun PCL-ALG conduit containing an optimal NC dosage (0.5%) and seeded with human OE-MSCs shows promising outcomes as NGC scaffold for peripheral nerve regeneration.

Synergetic effect of bioglass and nano montmorillonite on 3D printed nanocomposite of polycaprolactone/gelatin in the fabrication of bone scaffolds

Nowadays, bone injuries and disorders have increased all over the world and can reduce the quality of human life. Bone tissue engineering repair approaches require new biomaterials and methods to construct scaffolds with the required structural properties as well as improved performance. As potential therapeutic strategies in bone tissue engineering, 3D printed scaffolds have been developed. Polycaprolactone/Ceramic composites have attracted considerable attention due to their cytocompatibility, biodegradability, and physical properties. In this study, a 3D printing process was used to create polycaprolactone (PCL)-Gelatin (GEL) scaffolds containing varying concentrations of Bioglass (BG) and Nano Montmorillonite (MMT). This mixture was then loaded into a 3D printer, and the scaffolds were printed layer by layer. After constructing the scaffolds, they were then examined for their physical, chemical, and biological characteristics. Surface appearance was analyzed with a scanning electron microscope (SEM), which revealed that NC increased the diameter of pores from 465 to 480 μm. The elements in the scaffolds were evaluated by EDX analysis, and a uniform dispersion of nano montmorillonite particles was observed. The compressive strength reached 76.43 MPa for PCL/G/35 %MMT/15 %BG scaffold. Also, the rate of water absorption, biodegradability and bioactivity of PCL-GEL scaffolds increased significantly in the presence of NC. According to the MTT cell test results, adding BG and NC increased cell proliferation, adhesion and cell viability to 127.7 %. These findings indicated that the 3D printed PCL/G/35 %MMT/15 %BG scaffold has promising strategies for bone repair applications. Also, polynomial curve fitting shows that scaffold degradability after soaking in PBS can be predicted using the initial weight and soaking time. Adding more variables and data could improve prediction accuracy, reducing the need for experiments and conserving resources.

Facile fabrication of chitosan/hyaluronic acid hydrogel-based wound closure material Co-loaded with gold nanoparticles and fibroblast growth factor to improve anti-microbial and healing efficiency in diabetic wound healing and nursing care

Generally, diabetic wounds heal very slowly and inefficiently with an increasing risk of infections. Recent nanotechnology and biomaterial advances elaborate developed multi-functional hydrogels and nanoparticles offer promising solutions to accelerate wound healing for diabetic patients. This research work demonstrates to use of solvent diffusion method to develop hydrogel nanocomposites composed of chitosan (CS), hyaluronic acid (HA), gold (Au), and fibroblast growth factors (FGF). The biological analysis of nanocomposites exhibited enhanced wound healing efficiency by incorporating bioactive molecules like FGF and bioactive Au nanoparticles. In vitro, cell compatibility analysis (MTT assay) of prepared hydrogel nanocomposites was studied on fibroblast cell lines NIH-3T3-L1 and L929 and exhibited greater cell survival ability (>90 %), cell proliferation and migration ability, which demonstrated the suitability of nanocomposite for wound healing treatment. In vitro, anti-bacterial analyses established that FGF-Au@CS/HA has strong antibacterial effectiveness against gram-positive and gram-negative pathogens. The observation of the present research revealed that prepared FGF-Au@CS/HA hydrogel composites could be a suitable biomaterial for diabetic wound care, potentially improving its antibacterial and healing efficacies.

Sustainable bioactive food packaging based on electrospun zein-polycaprolactone nanofibers integrated with aster yomena extract loaded halloysite nanotubes

Compostable zein-polycaprolactone (PZ) electrospun nanofiber integrated with different concentrations of Aster yomena extract loaded halloysite nanotubes (A. yomena-HNT) as bioactive nanofibrous food packaging is reported. SEM micrographs reveal heterogeneous nanofibers. A. yomena extract used in the study showed weak antioxidant activity with AAI and TEAC values of 0.229 and 0.346. In vitro, release profile over 7 days of A. yomena indicates a controlled, sustained, and prolonged release. The prepared nanofibers were effective against both gram-positive and gram-negative bacteria. The prepared composite nanofibers were rendered biocompatible and nontoxic when subjected to WST-1 and LDH assay after incubating with NIH 3T3 mouse fibroblast cell line. PZ-15 nanofiber packaging showed the best postharvest quality preservation in Black mulberry fruits after 4 days of storage at 25 °C and 85 % Rh. Moreover, the in vitro decomposition test reveals that the fabricated nanofibers decompose in the soil and do not pose as a threat to the environment.

Exploring Electrospun Scaffold Innovations in Cardiovascular Therapy: A Review of Electrospinning in Cardiovascular Disease

Cardiovascular disease (CVD) remains the leading cause of mortality worldwide. In particular, patients who suffer from ischemic heart disease (IHD) that is not amenable to surgical or percutaneous revascularization techniques have limited treatment options. Furthermore, after revascularization is successfully implemented, there are a number of pathophysiological changes to the myocardium, including but not limited to ischemia-reperfusion injury, necrosis, altered inflammation, tissue remodeling, and dyskinetic wall motion. Electrospinning, a nanofiber scaffold fabrication technique, has recently emerged as an attractive option as a potential therapeutic platform for the treatment of cardiovascular disease. Electrospun scaffolds made of biocompatible materials have the ability to mimic the native extracellular matrix and are compatible with drug delivery. These inherent properties, combined with ease of customization and a low cost of production, have made electrospun scaffolds an active area of research for the treatment of cardiovascular disease. In this review, we aim to discuss the current state of electrospinning from the fundamentals of scaffold creation to the current role of electrospun materials as both bioengineered extracellular matrices and drug delivery vehicles in the treatment of CVD, with a special emphasis on the potential clinical applications in myocardial ischemia.

Evaluation of osteoconductive effect of polycaprolactone (PCL) scaffold treated with Aloe vera on adipose-derived mesenchymal stem cells (ADSCs)

BACKGROUND

Adipose-derived mesenchymal stem cells (ADSCs) hold promise for bone tissue engineering because of their ability to differentiate into a variety of cell lineages. In tissue engineering, composite scaffolds made of natural and synthetic polymers have also attracted interest. Modification of scaffolds with various substances, including Aloe Vera, is expected to play a useful role in the repair of damaged tissues, including bone.

METHOD

ADSCs were isolated and seeded in three groups on an Aloe Vera-modified PCL scaffold: 1. Polycaprolactone (PCL) scaffold group, 2. PCL/Aloe Vera scaffold group, and 3. TCPS (Tissue Culture Polystyrene) group. Subsequently, staining with Oil red and Alizarin Red was performed to assess the ability of ADSCs to differentiate into fat and bone cells. Cell viability was determined by the resazurin assay on days 1, 3, and 5. Calcium content and alkaline phosphatase activity (ALP) were determined with kits on days 7, 14, and 21. RNA was extracted, and cDNA was synthesized. Finally, the expression of marker genes for bone differentiation like osteogenic markers such as Osteonectin (ON), Osteocalcin (OC), RUNX Family Transcription Factor 2 (RUNX2), Collagen type I alpha 1 (COL1) was evaluated by real-time PCR.

RESULTS

Aloe vera-treated PCL scaffolds showed improved biocompatibility compared with untreated scaffolds (P<0.05). In addition, treated scaffolds promoted osteogenic differentiation of ADSCs, as evidenced by increased expression of osteogenic markers such ON, OC, RUNX2, COL1 compared with PCL scaffold and TCPS (P<0.05). Furthermore, ALP and calcium content assay confirmed improved mineral deposition on PCL scaffolds treated with Aloe vera, indicating enhanced osteoconductivity (P<0.05).

CONCLUSION

Our data suggest that a PCL scaffold mixed with Aloe Vera gel has promising osteoconductive potential, which can be used as a natural polymer for tissue engineering of bone and promote bone regeneration.

Investigation and multiscale modeling of PVA/SA coated poly lactic acid scaffold containing curcumin loaded layered double hydroxide nanohybrids

Applying hydrophilic coatings on polymeric nanofibers combined with layered double hydroxide (LDH) not only enhances the efficiency of drug delivery systems but also increases cell adhesion. This work aimed to prepare poly(vinyl alcohol)/sodium alginate (PVA/SA) (2/1)-coated poly(lactic acid) (PLA) nanofibers containing curcumin-loaded layered double hydroxide (LDH) and to investigate their drug release and mechanical properties and their biocompatibility. The optimum PLA nanofibrous sample was considered to be that based on 3 wt% of curcumin-loaded LDH (PLA-3%LDH) with a drug encapsulation efficiency of ∼18% in which a minimum average nanofiber diameter of ∼476 nm along with a high tensile strength of 3.00 MPa were obtained. In the next step, a PVA/SA (2/1) layer was coated on the PLA-3%LDH; as a result, the hydrophilicity of the sample was improved and the elongation at break was decreased remarkably. In this regard the cell viability reached 80% for the coated PLA. Moreover, the formation of a layer of (PVA/SA) on the PLA nanofibers lowered the burst release and resulted in a more sustained drug release, which is a vital feature in dermal applications. A multiscale modeling method was applied for simulation of the mechanical properties of the composite scaffold and the results showed that this method can predict the data with 83% accuracy. The results of this study indicate that the formation of a layer of PVA/SA (2/1) has a significant effect on hydrophilicity and consequently improves cell adhesion and proliferation.

Poly (l-lactic acid)-based modified nanofibrous membrane with dual drug release capability for GBR application

Electrospun multilayer nanofibers guided bone regeneration (GBR) with a new design were developed in this study. The synthesized multilayer GBR was composed of two distinct layers. Poly l-lactic acid (PLA) incorporated with simvastatin (SIM) was designed as PLA/SIM layer to contact with a bone defect. In addition, the hydrophilic gelatin (GT) containing thymol (THY) was fabricated as GT/THY layer to contact connective tissue, potentially for bacterial gathering. Due to the different chemical nature and weak cohesion of the hydrophilic and hydrophobic layers, hybrid fibers made of PLA/SIM and GT/THY were electrospun as cohesion promoters between these layers. The microstructure and characteristics of the synthesized multilayer substrate, named GT/PLA, were evaluated, and different fibrous monolayers were fabricated to determine the optimal concentrations of drugs. Scanning electron microscopy (SEM) images showed continuous, smooth, randomly aligned, and bead-free fibers. In addition, there were no drug particles on the fiber surfaces which displayed the good placement of those inside the fibers. The mats exhibited satisfactory tensile strength (4.60 ± 0.14 MPa) and favorable physicochemical properties, including proper porosity percentage (<50 %) and appropriate pore size. Suitable swelling behavior (293 ± 0.05 %) and adequate degradation rates were also approved by characterizing swelling and degradability in vitro. The GT/PLA membrane exhibited a prolonged and sustained SIM release and controlled THY release with high antibacterial efficiency. Cell viability, cell attachment assay, and nuclear staining using 4',6-diamidino-2-phenylindole (DAPI) showed that the designed GT/PLA substrate had good biocompatibility and cell attachment. Cell infiltration testing also showed that the cells were finely prevented by the outer layer (GT/THY). Overall, the obtained results in this study indicated the great potential of the prepared GT/PLA for use as a GBR which can develop osteogenic and antibacterial biomimetic periosteum optimizing the clinical application of GBR strategies.

Development of chitosan-polygalacturonic acid polyelectrolyte complex fibrous scaffolds using the hydrothermal treatment for bone tissue engineering

An ideal bone regeneration scaffold system needs to meet the high compressive properties of the bone. The stiffness of the scaffold extracellular matrix determines the cell's fate via cell adhesion migration and differentiation in-vitro and in-vivo. This study aims to investigate the effect of hydrothermal treatment on polyelectrolyte complex (PEC) fibrous biomaterials and its effect on scaffold morphology, cell viability, and function in-vitro. FTIR analysis revealed the ability of the thermal treatment to set the interaction of HAp with polymeric PEC fibers. FESEM analysis showed that with an increase in temperature, the interconnectivity and pore size increased (control-82.38 ± 12.92 μm; at 120°C-335.48 ± 85.10 μm). Mechanical tests showed that the scaffolds heated at 90°C showed the highest stiffness in both dry and wet states (dry state: 1.82 ± 0.07 MPa, wet state: 122 ± 1.78 kPa). Additionally, the hydrothermal treatment also improved the aqueous stability as well as swelling capacity. According to the experimental findings, hydrothermal treatment is a useful technique for crosslinker-free gelation with improved mechanical strength and nanofibrous structure. Furthermore, the cell adhesion, proliferation, and osteogenic differentiation of the MG63 cells on the hydrogel scaffolds in-vitro were evaluated by MTT assay, confocal imaging, alkaline phosphatase assay, and collagen estimation. The in-vitro study showed that scaffolds fabricated at 90°C promoted better MG63 cell attachment, proliferation, and differentiation. These results suggest the potential use of hydrothermal treated chitosan-polygalacturonic acid (PgA) fibrous scaffolds in bone tissue engineering.

3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating

In the realm of biomaterials, particularly bone tissue engineering, there has been a great increase in interest in scaffolds with hierarchical porosity and customizable multifunctionality. Recently, the three-dimensional (3D) printing of biopolymer-based inks (solutions or emulsions) has gained high popularity for fabricating tissue engineering scaffolds, which optimally satisfies the desired properties and performances. Herein, therefore, we explore the fabrication of 3D printed hierarchical porous scaffolds of poly(ε-caprolactone) (PCL) using the water-in-oil (w/o) Pickering PCL high internal phase emulsions (HIPEs) as the ink in 3D printer. The Pickering PCL HIPEs stabilized using hydrophobically modified nanoclay comprised of aqueous poly(vinyl alcohol) (PVA) as the dispersed phase. Rheological measurements suggested the shear thinning behavior of Pickering HIPEs having a dispersed droplet diameter of 3-25 μm. The pore morphology resembling the natural extracellular matrix and the mechanical properties of scaffolds were customized by tuning the emulsion composition and 3D printing parameters. In vitro biomineralization and drug release studies proved the scaffolds' potential in developing the apatite-rich bioactive interphase and controlled drug delivery, respectively. During in vitro osteoblast (MG63) growth experiments for up to 7 days, good adhesion and proliferation on PCL scaffolds confirmed their cytocompatibility, assessed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) analysis. This study suggests that the assembly of HIPE templates and 3D printing is a promising approach to creating hierarchical porous scaffolds potentially suitable for bone tissue engineering and can be stretched to other biopolymers as well.

Manufacturing of scaffolds with interconnected internal open porosity and surface roughness

Manufacturing of three-dimensional scaffolds with multiple levels of porosity are an advantage in tissue regeneration approaches to influence cell behavior. Three-dimensional scaffolds with surface roughness and intra-filament open porosity were successfully fabricated by additive manufacturing combined with chemical foaming and porogen leaching without the need of toxic solvents. The decomposition of sodium citrate, a chemical blowing agent, generated pores within the scaffold filaments, which were interconnected and opened to the external environment by leaching of a water-soluble sacrificial phase, as confirmed by micro-CT and buoyancy measurements. The additional porosity did not result in lower elastic modulus, but in higher strain at maximum load, i.e. scaffold ductility. Human mesenchymal stromal cells cultured for 24 h adhered in greater numbers on these scaffolds when compared to plain additive-manufactured ones, irrespectively of the scaffold pre-treatment method. Additionally, they showed a more spread and random morphology, which is known to influence cell fate. Cells cultured for a longer period exhibited enhanced metabolic activity while secreting higher osteogenic markers after 7 days in culture. STATEMENT OF SIGNIFICANCE: Inspired by the function of hierarchical cellular structures in natural materials, this work elucidates the development of scaffolds with multiscale porosity by combining in-situ foaming and additive manufacturing, and successive porogen leaching. The resulting scaffolds displayed enhanced mechanical toughness and multiscale pore network interconnectivity, combined with early differentiation of adult mesenchymal stromal cells into the osteogenic lineage.

Albumin-Coated Polycaprolactone (PCL)-Decellularized Extracellular Matrix (dECM) Scaffold for Bone Regeneration

With the emphasis on collagen and hydroxyapatite, the main structural components of bone tissue, synthetic grafts fall short of matching the clinical efficacy of autologous bone grafts. Excluded non-collagenous protein (NCPs) and carbohydrates also participate in critical cell signaling cascades and guide mineral deposition during intermediate stages of bone healing. By mimicking the native fracture repair process, polymeric scaffolds that incorporate calcium-binding moieties present in fibrocartilage can potentially enhance their bioactivity, mineralization, and bone growth. Likewise, coating polymeric fibers with serum albumin is an additional strategy that can impart collagen-like biofunctionality and further increase mineral deposition on the fibrous surface. Here, a combination of electrospun polycaprolactone (PCL) fibers with chondrocyte-derived decellularized extracellular matrix (dECM) and albumin coating were investigated as a fibrocartilage-mimetic scaffold that can serve as a woven bone precursor for bone regeneration. PCL fibrous constructs coated with dECM and albumin are shown to synergistically increase calcium concentration and calcium phosphate (CaP) deposition in a simulated body fluid biomineralization assay. Albumin/dECM coating increased osteoblast proliferation and mineral deposition in culture. In contrast, CaP coating transformed osteoblast bone lining morphology into cuboidal phenotype and arrested their proliferation. Cell sheets of osteoblasts cultured on dECM/albumin/CaP-coated constructs exhibited an increase in calcium deposition and secretion of collagen, osteopontin, osteocalcin, and bone morphogenetic protein. These results highlight the potential of biomolecular coatings to enhance bone-mimetic properties of synthetic nanofibrous scaffolds, stimulate critical protein and mineral deposition, and augment the bone's capacity to heal. Thus, mimicking the intermediate stages of bone regeneration by incorporating calcium-binding moieties may prove to be a useful strategy for improving the clinical outcomes of synthetic bone grafts.

Synthetic materials in craniofacial regenerative medicine: A comprehensive overview

The state-of-the-art approach to regenerating different tissues and organs is tissue engineering which includes the three parts of stem cells (SCs), scaffolds, and growth factors. Cellular behaviors such as propagation, differentiation, and assembling the extracellular matrix (ECM) are influenced by the cell's microenvironment. Imitating the cell's natural environment, such as scaffolds, is vital to create appropriate tissue. Craniofacial tissue engineering refers to regenerating tissues found in the brain and the face parts such as bone, muscle, and artery. More biocompatible and biodegradable scaffolds are more commensurate with tissue remodeling and more appropriate for cell culture, signaling, and adhesion. Synthetic materials play significant roles and have become more prevalent in medical applications. They have also been used in different forms for producing a microenvironment as ECM for cells. Synthetic scaffolds may be comprised of polymers, bioceramics, or hybrids of natural/synthetic materials. Synthetic scaffolds have produced ECM-like materials that can properly mimic and regulate the tissue microenvironment's physical, mechanical, chemical, and biological properties, manage adherence of biomolecules and adjust the material's degradability. The present review article is focused on synthetic materials used in craniofacial tissue engineering in recent decades.

Synergistic effects of nanoattapulgite and hydroxyapatite on vascularization and bone formation in a rabbit tibia bone defect model

Hydroxyapatite (HA) is a promising scaffold material for the treatment of bone defects. However, the lack of angiogenic properties and undesirable mechanical properties (such as fragility) limits the application of HA. Nanoattapulgite (ATP) is a nature-derived clay mineral and has been proven to be a promising bioactive material for bone regeneration due to its ability to induce osteogenesis. In this study, polyvinyl alcohol/collagen/ATP/HA (PVA/COL/ATP/HA) scaffolds were printed. Mouse bone marrow mesenchymal stem/stromal cells (BMSCs) and human umbilical vein endothelial cells (HUVECs) were used in vitro to assess the biocompatibility and the osteogenesis and vascularization induction potentials of the scaffolds. Subsequently, in vivo micro-CT and histological staining were carried out to evaluate new bone formation in a rabbit tibial defect model. The in vitro results showed that the incorporation of ATP increased the printing fidelity and mechanical properties, with values of compressive strengths up to 200% over raw PC-H scaffolds. Simultaneously, the expression levels of osteogenic-related genes and vascularization-related genes were significantly increased after the incorporation of ATP. The in vivo results showed that the PVA/COL/ATP/HA scaffolds exhibited synergistic effects on promoting vascularization and bone formation. The combination of ATP and HA provides a promising strategy for vascularized bone tissue engineering.

Inorganic Nanomaterials in Tissue Engineering

In recent decades, the demand for replacement of damaged or broken tissues has increased; this poses the attention on problems related to low donor availability. For this reason, researchers focused their attention on the field of tissue engineering, which allows the development of scaffolds able to mimic the tissues' extracellular matrix. However, tissue replacement and regeneration are complex since scaffolds need to guarantee an adequate hierarchical structured morphology as well as adequate mechanical, chemical, and physical properties to stand the stresses and enhance the new tissue formation. For this purpose, the use of inorganic materials as fillers for the scaffolds has gained great interest in tissue engineering applications, due to their wide range of physicochemical properties as well as their capability to induce biological responses. However, some issues still need to be faced to improve their efficacy. This review focuses on the description of the most effective inorganic nanomaterials (clays, nano-based nanomaterials, metal oxides, metallic nanoparticles) used in tissue engineering and their properties. Particular attention has been devoted to their combination with scaffolds in a wide range of applications. In particular, skin, orthopaedic, and neural tissue engineering have been considered.

Evaluation of Osteogenic Differentiation of Bone Marrow-Derived Mesenchymal Stem Cell on Highly Porous Polycaprolactone Scaffold Reinforced With Layered Double Hydroxides Nanoclay

In recent decades, bone tissue engineering has had an effective role in introducing orthopedic implants. In this regard, polymeric scaffolds reinforced with bioactive nanomaterials can offer great potential in tissue engineering implants for replacing bone loss in patients. In this study, the thermally induced phase separation method was used to fabricate three-dimensional highly porous scaffolds made of layered double hydroxide (LDH)/polycaprolactone (PCL) nanocomposites with varied LDH contents ranging from 0.1 wt.% to 10 wt.%. The Phase identification, morphology, and elemental composition were studied using X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy, respectively. Interconnected pores ranging from 5 to 150 µm were detected in all samples. The results revealed that the inclusion of LDH to PCL scaffold reinforced mechanical strength and compressive modulus increased from 0.6418 to 1.3251 for the pure PCL and PCL + LDH (1 Wt.%) scaffolds, respectively. Also, thermal stability, degradation rate, and biomineralization especially in comparison with the pure PCL were enhanced. Adhesion, viability, and proliferation of human bone marrow-derived mesenchymal stem cells (hBMSCs) seeded on PCL + LDH scaffolds were improved as compared to the pure PCL. Furthermore, the addition of LDH resulted in the increased mineral deposition as well as expression of ALP and RUNX2 osteogenic genes in terms of differentiation. All in all, our findings revealed that PCL + LDH (1 Wt.%) scaffold might be an ideal choice for 3D scaffold design in bone tissue engineering approaches.

Attapulgite-doped electrospun PCL scaffolds for enhanced bone regeneration in rat cranium defects

Electrospun PCL scaffolds have been widely used for tissue engineering as they have shown great potential to mimic the structure of the natural extracellular matrix (ECM). However, the small pore size and low bioactivity of the scaffolds limit cell migration and tissue formation. In this study, PCL (polycaprolactone), PCL/PEG (polyethylene glycol), and PCL/PEG/ATP (nano-attapulgite) scaffolds were fabricated via electrospinning. To increase the porosity of the scaffolds, they were washed to remove water-soluble PEG fibers. Then the porous structure was measured using scanning electron microscopy (SEM) and atomic force microscopy (AFM), which showed an increased porosity when PEG fibers were removed in PCL/PEG and PCL/PEG/ATP scaffolds. Moreover, the mechanical properties were also analyzed in dry and wet conditions. In vitro mouse multipotent mesenchymal precursor cells were used to assess the biocompatibility of the scaffolds, and osteogenesis was analyzed using CCK-8 and real-time PCR (RT-PCR) methods. Moreover, in vivo μCT, histological and immunohistochemical analyses were conducted to evaluate new bone formation in rat cranium defect models. Washed PCL/PEG/ATP scaffolds were implanted into the cranium defects in rats for 4 or 8 weeks, better cell infiltration was observed in these scaffolds than in unwashed ones. The result demonstrated that washed PCL/PEG/ATP scaffold facilitated the differentiation of MSCs into osteoblasts compared with PCL scaffold, as proved by the increased expression of osteogenic key genes as well as Smad1, Smad4, and Smad5. Furthermore, in vivo studies demonstrated that using the ATP-doped electrospun PCL scaffold can improve the bone regeneration of rat cranium defects. Particularly, the PCL/ATP-30% scaffold has the best effect compared to the other scaffolds. The enhanced osteogenesis and bone repair were related to the PCL/ATP activated BMP/Smad signaling pathway.

Vascularized bone regeneration accelerated by 3D-printed nanosilicate-functionalized polycaprolactone scaffold

Critical oral-maxillofacial bone defects, damaged by trauma and tumors, not only affect the physiological functions and mental health of patients but are also highly challenging to reconstruct. Personalized biomaterials customized by 3D printing technology have the potential to match oral-maxillofacial bone repair and regeneration requirements. Laponite (LAP) nanosilicates have been added to biomaterials to achieve biofunctional modification owing to their excellent biocompatibility and bioactivity. Herein, porous nanosilicate-functionalized polycaprolactone (PCL/LAP) was fabricated by 3D printing technology, and its bioactivities in bone regeneration were investigated in vitro and in vivo. In vitro experiments demonstrated that PCL/LAP exhibited good cytocompatibility and enhanced the viability of bone marrow mesenchymal stem cells (BMSCs). PCL/LAP functioned to stimulate osteogenic differentiation of BMSCs at the mRNA and protein levels and elevated angiogenic gene expression and cytokine secretion. Moreover, BMSCs cultured on PCL/LAP promoted the angiogenesis potential of endothelial cells by angiogenic cytokine secretion. Then, PCL/LAP scaffolds were implanted into the calvarial defect model. Toxicological safety of PCL/LAP was confirmed, and significant enhancement of vascularized bone formation was observed. Taken together, 3D-printed PCL/LAP scaffolds with brilliant osteogenesis to enhance bone regeneration could be envisaged as an outstanding bone substitute for a promising change in oral-maxillofacial bone defect reconstruction.

Physical and biological properties of electrospun poly(d,l-lactide)/nanoclay and poly(d,l-lactide)/nanosilica nanofibrous scaffold for bone tissue engineering

Electrospun scaffolds exhibiting high physical performances with the ability to support cell attachment and proliferation are attracting more and more scientific interest for tissue engineering applications. The inclusion of inorganic nanoparticles such as nanosilica and nanoclay into electrospun biopolymeric matrices can meet these challenging requirements. The silica and clay incorporation into polymeric nanofibers has been reported to enhance and improve the mechanical properties as well as the osteogenic properties of the scaffolds. In this work, for the first time, the physical and biological properties of polylactic acid (PLA) electrospun mats filled with different concentrations of nanosilica and nanoclay were evaluated and compared. The inclusion of the particles was evaluated through morphological investigations and Fourier transform infrared spectroscopy. The morphology of nanofibers was differently affected by the amount and kind of fillers and it was correlated to the viscosity of the polymeric suspensions. The wettability of the scaffolds, evaluated through wet contact angle measurements, slightly increased for both the nanocomposites. The crystallinity of the systems was investigated by differential scanning calorimetry highlighting the nucleating action of both nanosilica and nanoclay on PLA. Scaffolds were mechanically characterized with tensile tests to evaluate the reinforcing action of the fillers. Finally, cell culture assays with pre-osteoblastic cells were conducted on a selected composite scaffold in order to compare the cell proliferation and morphology with that of neat PLA scaffolds. Based on the results, we can convince that nanosilica and nanoclay can be both considered great potential fillers for electrospun systems engineered for bone tissue regeneration.

Nanosilicate-Functionalized Polycaprolactone Orchestrates Osteogenesis and Osteoblast-Induced Multicellular Interactions for Potential Endogenous Vascularized Bone Regeneration

Massive oral and maxillofacial bone defect regeneration remains a major clinical challenge due to the absence of functionalized bone grafts with ideal mechanical and proregeneration properties. In the present study, Laponite (LAP), a synthetic nanosilicate, is incorporated into polycaprolactone (PCL) to develop a biomaterial for bone regeneration. It is explored whether LAP-embedded PCL would accelerate bone regeneration by orchestrating osteoblasts to directly and indirectly induce bone regeneration processes. The results confirmed the presence of LAP in PCL, and LAP is distributed in the exfoliated structure without aggregates. Incorporation of LAP in PCL slightly improved the compressive properties. LAP-embedded PCL is biocompatible and exerts pronounced enhancements in cell viability, osteogenic differentiation, and extracellular matrix formation of osteoblasts. Furthermore, osteoblasts cultured on LAP-embedded PCL facilitate angiogenesis of vessel endothelial cells and alleviate osteoclastogenesis of osteoclasts in a paracrine manner. The addition of LAP to the PCL endows favorable bone formation in vivo. Based upon these results, LAP-embedded PCL shows great potential as an ideal bone graft that exerts both space-maintaining and vascularized bone regeneration synergistic effects and can be envisioned for oral and maxillofacial bone defect regeneration.

Optimization of Nanoclay/Polyacrylonitrile Scaffold Using Response Surface Method for Bone Differentiation of Human Mesenchymal Stem Cells

Response surface methodology (RSM) based on the D-optimal algorithm was employed here for the electrospinning of nanoclay/polyacrylonitrile (PAN) composite scaffold by the aim of obtaining the lower fiber diameter and better mechanical properties for bone regeneration. The input parameters included the electrospinning voltage, flow rate and the ratio of nanoclay/PAN and the obtained values for the optimum point were 17 kV for the applied voltage, 0.41 ml/hr for flow rate, and 19.06% for the nanoclay/PAN ratio. The composite scaffold was fabricated in accordance with these optimum values and then studied by scanning electron microscopy and tensile apparatus. The fiber diameter and Young's modulus of the prepared scaffold were respectively 145 ± 12 nm and 267 ± 8.7 MPa that the values were between predicted by RSM. Moreover, the biocompatibility and osteogenic differentiation of the composite scaffold were evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide and alkaline phosphatase assays. The bare scaffold and tissue culture polystyrene were used as control groups. The results approved stronger bioactivity and bone regeneration with the composite scaffold as a presence of clay nanoparticles.

Nanoclay Reinforced Biomaterials for Mending Musculoskeletal Tissue Disorders

Nanoclay-reinforced biomaterials have sparked a new avenue in advanced healthcare materials that can potentially revolutionize treatment of musculoskeletal defects. Native tissues display many important chemical, mechanical, biological, and physical properties that engineered biomaterials need to mimic for optimal tissue integration and regeneration. However, it is time-consuming and difficult to endow such combinatorial properties on materials via feasible and nontoxic procedures. Fortunately, a number of nanomaterials such as graphene, carbon nanotubes, MXenes, and nanoclays already display a plethora of material properties that can be transferred to biomaterials through a simple incorporation procedure. In this direction, the members of the nanoclay family are easy to functionalize chemically, they can significantly reinforce the mechanical performance of biomaterials, and can provide bioactive properties by ionic dissolution products to upregulate cartilage and bone tissue formation. For this reason, nanoclays can become a key component for future orthopedic biomaterials. In this review, we specifically focus on the rapidly decreasing gap between clinic and laboratory by highlighting their application in a number of promising in vivo studies.

De Novo Design of Functional Coassembling Organic-Inorganic Hydrogels for Hierarchical Mineralization and Neovascularization

Synthetic nanostructured materials incorporating both organic and inorganic components offer a unique, powerful, and versatile class of materials for widespread applications due to the distinct, yet complementary, nature of the intrinsic properties of the different constituents. We report a supramolecular system based on synthetic nanoclay (Laponite, Lap) and peptide amphiphiles (PAs, PAH3) rationally designed to coassemble into nanostructured hydrogels with high structural integrity and a spectrum of bioactivities. Spectroscopic and scattering techniques and molecular dynamic simulation approaches were harnessed to confirm that PAH3 nanofibers electrostatically adsorbed and conformed to the surface of Lap nanodisks. Electron and atomic force microscopies also confirmed an increase in diameter and surface area of PAH3 nanofibers after coassembly with Lap. Dynamic oscillatory rheology revealed that the coassembled PAH3-Lap hydrogels displayed high stiffness and robust self-healing behavior while gas adsorption analysis confirmed a hierarchical and heterogeneous porosity. Furthermore, this distinctive structure within the three-dimensional (3D) matrix provided spatial confinement for the nucleation and hierarchical organization of high-aspect ratio hydroxyapatite nanorods into well-defined spherical clusters within the 3D matrix. Applicability of the organic-inorganic PAH3-Lap hydrogels was assessed in vitro using human bone marrow-derived stromal cells (hBMSCs) and ex vivo using a chick chorioallantoic membrane (CAM) assay. The results demonstrated that the organic-inorganic PAH3-Lap hydrogels promote human skeletal cell proliferation and, upon mineralization, integrate with the CAM, are infiltrated by blood vessels, stimulate extracellular matrix production, and facilitate extensive mineral deposition relative to the controls.

Fabrication and Evaluation of Layered Double Hydroxide-Enriched ß-Tricalcium Phosphate Nanocomposite Granules for Bone Regeneration: In Vitro Study

One of the most important challenges facing tissue engineering researches is the scaffold design with optimum physical and mechanical properties for growth and proliferation of cells, and tissue formation. The aim of this study was to produce a novel nanocomposite containing β-tricalcium phosphate and layered double hydroxide (β-TCP-LDH) and analyzing the capacity of its osteogenic activity in vitro. In this paper, β-tricalcium phosphate and layered double hydroxide powders were synthesized by co-precipitation processes. Then, the porous nanocomposite granules were prepared by the polyurethane sponge replication method. In this study, four kinds of β-TCP granules containing LDHs nanoparticles (ranging from 0.1 to 10 wt%) have been prepared. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX) analyses were selected to study the phase structure, morphology, and phase distribution, respectively. Physicochemical characterizations demonstrated that the granules were synthesized successfully. Interconnected macro pores ranging over 200-500 μm were observed for all kinds of granules. SEM micrographs showed that human mesenchymal stem cells (hMSCs) were attached to the surfaces of the granules and proliferated in good shape. The results warranted that the synthesized granules exhibited good biocompatibility and mineralization. Based on the results of compressive strength and porosity tests, the most suitable type of granule is β-TCP/LDH 10 wt% with 77% porosity and compressive modulus of 231.4 MPa, which can be utilized in bone tissue engineering. To our knowledge, layered double hydroxides have not previously been incorporated into tricalcium phosphate granules for bone grafting. Also, this study is the first report on the effects of LDH on the mechanical properties and porosity of β-TCP granules. Our results demonstrated that β-TCP/LDH nanocomposite granule has a great potential for bone defects regeneration and tissue engineering applications.

Electrospinning of in situ synthesized silica-based and calcium phosphate bioceramics for applications in bone tissue engineering: A review

The field of bone tissue engineering (BTE) focuses on the repair of bone defects that are too large to be restored by the natural healing process. To that purpose, synthetic materials mimicking the natural bone extracellular matrix (ECM) are widely studied and many combinations of compositions and architectures are possible. In particular, the electrospinning process can reproduce the fibrillar structure of bone ECM by stretching a viscoelastic solution under an electrical field. With this method, nano/micrometer-sized fibres can be produced, with an adjustable chemical composition. Therefore, by shaping bioactive ceramics such as silica, bioactive glasses and calcium phosphates through electrospinning, promising properties for their use in BTE can be obtained. This review focuses on the in situ synthesis and simultaneous electrospinning of bioceramic-based fibres while the reasons for using each material are correlated with its bioactivity. Theoretical and practical considerations for the synthesis and electrospinning of these materials are developed. Finally, investigations into the in vitro and in vivo bioactivity of different systems using such inorganic fibres are exposed.

HA/MgO nanocrystal-based hybrid hydrogel with high mechanical strength and osteoinductive potential for bone reconstruction in diabetic rats

Bone repair and regeneration processes are markedly impaired in diabetes mellitus (DM). Intervening approaches similar to those developed for normal healing conditions have been adopted to combat DM-associated bone regeneration. However, limited outcomes were achieved for these approaches. Hence, together with osteoconductive hydroxyapatite (HA) nanocrystals, osteoinductive magnesium oxide (MgO) nanocrystals were uniformly mounted into the network matrix of an organic hydrogel composed of cysteine-modified γ-polyglutamic acid (PGA-Cys) to construct a hybrid and rough hydrogel scaffold. It was hypothesized that the HA/MgO nanocrystal hybrid hydrogel (HA/MgO-H) scaffold can significantly promote bone repair in DM rats via the controlled release of Mg²⁺. The HA/MgO-H scaffold exhibited a sponge-like morphology with porous 3D networks inside it and displayed higher mechanical strength than a PGA-Cys scaffold. Meanwhile, the HA/MgO-H scaffold gradually formed a tough hydrogel with G' of more than 1000 Pa after hydration, and its high hydration swelling ratio was still retained. Moreover, after the chemical degradation of the dispersed MgO nanocrystals, slow release of Mg²⁺ from the hydrogel matrix was achieved for up to 8 weeks because of the chelation between Mg²⁺ and the carboxyl groups of PGA-Cys. In vitro cell studies showed that the HA/MgO-H scaffold could not only effectively promote the migration and proliferation of BMSCs but could also induce osteogenic differentiation. Moreover, in the 8th week after implanting the HA/MgO-H scaffold into femur bone defect zones of DM rats, more effective bone repair was presented by micro-CT imaging. The bone mineral density (397.22 ± 16.36 mg cm^-3), trabecular thickness (0.48 ± 0.07 mm), and bone tissue volume/total tissue volume (79.37 ± 7.96%) in the HA/MgO-H group were significantly higher than those in the other groups. Moreover, higher expression of COL-I and OCN after treatment with HA/MgO-H was also displayed. The bone repair mechanism of the HA/MgO-H scaffold was highly associated with reduced infiltration of pro-inflammatory macrophages (CD80⁺) and higher angiogenesis (CD31⁺). Collectively, the HA/MgO-H scaffold without the usage of bioactive factors may be a promising biomaterial to accelerate bone defect healing under diabetes mellitus.

Optimization of Topography and Surface Properties of Polyacrylonitrile-Based Electrospun Scaffolds via Nonoclay Concentrations and its Effect on Osteogenic Differentiation of Human Mesenchymal Stem Cells

Nowadays, mesenchymal stem cells (MSCs) are the most widely used cell sources for bone regenerative medicine. Electrospun polyacrylonitrile (PAN)-based scaffolds play an important role in bone tissue engineering due to their good mechanical properties, which could be enhanced by the presence of nanoparticles such as nanoclay. This study evaluated the in-vitro effect of different concentrations of nanoclay in surface characteristic properties of PAN-based electrospun nanofiber scaffolds and the osteogenic differentiation ability of adipose-derived mesenchymal stem cells (AD-MSCs). After electrospinning nanofibers, their structure were assessed through some characterization tests. Then AD-MSCs isolation and characterization were done, and the cell attachment and the biocompatibility were determined. Finally, osteogenic differentiation-related markers, genes, and proteins were studied. Clay-PAN25% electrospun nanofiber scaffold could support attachment, proliferation, and osteogenic differentiation of AD-MSCs better than other groups. Also, nanoclay could enhance the properties of PAN-based scaffolds, such as fiber diameter, topography, surface charge, hydrophilicity, roughness, and degradation, as well as osteogenic differentiation of cells. As a result, Clay-PAN25% with the highest concentration of nanoclay was found as a promising biodegradable and cost-effective scaffold for osteogenic differentiation of AD-MSCs.

Nano-Silicate-Reinforced and SDF-1α-Loaded Gelatin-Methacryloyl Hydrogel for Bone Tissue Engineering

Purpose

Autologous bone grafts are the gold standard for treating bone defects. However, limited bone supply and morbidity at the donor site restrict its extensive use. Therefore, developing bone graft materials as an alternative to autologous grafts has gained considerable attention. Injectable hydrogels endowed with osteogenic potential have the ability to fill irregular bone defects using minimally invasive procedures and have thus been attracting researchers’ attention. However, from a clinical perspective, most fabrication methods employed for the current injectable osteogenic hydrogels are difficult and inconvenient. In the current study, we fabricated an injectable osteogenic hydrogel using a simple and convenient strategy.

Materials and Methods

Gelatin-methacryloyl (GelMA) pre-polymer was synthetized. Nano silicate (SN) and stromal cell-derived factor-1 alpha (SDF-1α) were introduced into the pre-polymer to achieve injectability, controlled release property, excellent osteogenic ability, and efficient stem cell homing.

Results

The GelMA-SN-SDF-1α demonstrated excellent injectability via a 17-G needle at room temperature. The loaded SDF-1α exhibited a long-term controlled release pattern and efficiently stimulated MSC migration and homing. The GelMA-SN-SDF-1α hydrogel amplified cell spreading, migration, osteogenic-related biomarker expression, and matrix mineralization. The GelMA-SN-SDF-1α hydrogel filled critical-sized calvaria defects in rats and demonstrated excellent bone regeneration ability, as assessed using micro-CT scanning and histomorphometric staining.

Conclusion

The GelMA-SN-SDF-1α hydrogel provides a simple and convenient strategy for the fabrication of injectable osteogenic graft materials.

Point your SmartPhone at the code above. If you have a QR code reader the video abstract will appear. Or use:

https://youtu.be/FhyefSKUa34

Preparation and Characterization of Nano-Laponite/PLGA Composite Scaffolds for Urethra Tissue Engineering

The purpose of this study was to construct a biomimetic urethral repair substitute. The nano-Laponite/polylactic acid-glycolic acid copolymer (PLGA) fiber scaffolds were produced to replicate the natural human urethra tissue microenvironment. PLGA (molar ratio 50:50) and Laponite were used in this study as raw materials. The nano-Laponite/PLGA scaffolds were fabricated via electrospinning technology. After preparing the material, the microstructural and mechanical properties of the nano-Laponite/PLGA scaffold were tested via scanning electron microscopy and electronic universal testing. The effects of different amounts of Laponite on the degradation of the nano-Laponite/PLGA scaffold were studied. Human umbilical vein endothelial cells (HUVECs) were co-cultured with PLGA and nano-Laponite/PLGA scaffolds for 24, 48, or 72 h. Scanning electron microscopy results illustrated that the microstructure of the scaffold fabricated by electrospinning was similar to that of the natural extracellular matrix. When the electrospinning liquid contained 10% Laponite, the nano-Laponite/PLGA stress-strain curve illustrated that the scaffold has strong elastic deformation ability. HUVECs exhibited good growth on the nano-Laponite/PLGA scaffold. When the scaffold contained 1% Laponite, the cell proliferation rate in the CCK-8 test was significantly better than that for the other three materials, displaying good cell culture characteristics. The 1% nano-Laponite/PLGA composite scaffold can be used as a suitable urethral repair material, but its performance requires further development and research.

A self-sterilizing fluorescent nanocomposite as versatile material with broad-spectrum antibiofilm features

Hematogenous spread of infections from colonized central intravenous catheters or central lines is a long-recognized problem with infection rates of 2 and 6.8 per 1000 days, respectively. Besides, removal of severe microbial colonization of implanted biomaterials is still a challenge and usually requires invasive operations. Hence, on demand self-sterilizing materials are required to avoid explant of colonized biomaterials and improve patient compliance. Moreover, photoluminescence is needed to make trackable biomaterials, which can be easily monitored upon implanting them in the body. Here, we propose the incorporation of near infrared (NIR) sensitive red-emitting carbon nanodot (CDs) into a polymeric matrix to give rise to innovative biomaterials with self-tracking and photothermal antimicrobial abilities. We obtain a material which can be processed to obtain medical devices using different techniques, among which, for instance, electrospinning. Herein, a proof-of-concept preparation of electrospun scaffolds is reported as it is highly desired in biomedical applications. Beside to confer imaging properties to the scaffold, that would allow an easy control over the in vivo positioning of implanted biomaterials as well as its degradation state and grade of integration with the surrounding native tissues, thanks to the capability to convert NIR light into local heat CDs can be exploited to exert broad-spectrum antimicrobial effect toward several pathogens. The rise in temperature can be easily modulated by controlling the irradiation time to achieve both an in vitro self-sterilization of the device and eventually in vivo destabilization of the microbial colonization. This innovative biomaterial could successfully inhibit biofilm formation and might be used as a powerful tool to treat antibiotic-resistant nature of biofilm-related infections in implanted medical devices.

Advancing bioinks for 3D bioprinting using reactive fillers: A review

The growing demand for personalized implants and tissue scaffolds requires advanced biomaterials and processing strategies for the fabrication of three-dimensional (3D) structures mimicking the complexity of the extracellular matrix. During the last years, biofabrication approaches like 3D printing of cell-laden (soft) hydrogels have been gaining increasing attention to design such 3D functional environments which resemble natural tissues (and organs). However, often these polymeric hydrogels show poor stability and low printing fidelity and hence various approaches in terms of multi-material mixtures are being developed to enhance pre- and post-printing features as well as cytocompatibility and post-printing cellular development. Additionally, bioactive properties improve the binding to the surrounding (host) tissue at the implantation site. In this review we focus on the state-of-the-art of a particular type of heterogeneous bioinks, which are composed of polymeric hydrogels incorporating inorganic bioactive fillers. Such systems include isotropic and anisotropic silicates like bioactive glasses and nanoclays or calcium-phosphates like hydroxyapatite (HAp), which provide in-situ crosslinking effects and add extra functionality to the matrix, for example mineralization capability. The present review paper discusses in detail such bioactive composite bioink systems based on the available literature, revealing that a great variety has been developed with substantially improved bioprinting characteristics, in comparison to the pure hydrogel counterparts, and enabling high viability of printed cells. The analysis of the results of the published studies demonstrates that bioactive fillers are a promising addition to hydrogels to print stable 3D constructs for regeneration of tissues. Progress and challenges of the development and applications of such composite bioink approaches are discussed and avenues for future research in the field are presented. STATEMENT OF SIGNIFICANCE: Biofabrication, involving the processing of biocompatible hydrogels including cells (bioinks), is being increasingly applied for developing complex tissue and organ mimicking structures. A variety of multi-material bioinks is being investigated to bioprint 3D constructs showing shape stability and long-term biological performance. Composite hydrogel bioinks incorporating inorganic bioreactive fillers for 3D bioprinting are the subject of this review paper. Results reported in the literature highlight the effect of bioactive fillers on bioink properties, printability and on cell behavior during and after printing and provide important information for optimizing the design of future bioinks for biofabrication, exploiting the extra functionalities provided by inorganic fillers. Further functionalization with drugs/growth factors can target enhanced printability and local drug release for more specialized biomedical therapies.

Bone interface modulates drug resistance in breast cancer bone metastasis

Metastatic breast cancer cells on arriving at bone site interact with the bone cells to influence their growth, proliferation, and chemoresistance. There are currently no effective therapeutics available in the clinic for bone metastases. Many existing anti-cancer therapeutics are ineffective at the metastatic bone site due to a lack of accurate models of breast cancer bone metastasis for drug screening. Here, we report the development of an effective in vitro model using osteogenically differentiated human mesenchymal stem cells (MSCs) and human breast cancer cells on 3D nanoclay scaffolds as a testbed for screening drugs. Our results demonstrate that breast cancer cells grown in 3D bone-mimetic scaffolds exhibited altered physiological and biochemical properties, including tumoroids formation, elevated levels of cytokine such as IL-6, and its downstream effector-mediated inhibition of apoptosis and upregulation of multidrug transporters proteins, leading to drug resistance against paclitaxel. Most importantly, Signal Transducer and Activator of Transcription 3 (STAT3), a potential biomarker for chemoresistance in many cancers, was activated in the 3D breast cancer bone metastasis model. Thus, our data suggest that 3D bone-mimetic nanoclay scaffolds-based in vitro tumor model is a promising testbed for screening new therapeutics for breast cancer bone metastasis where bone interface governs drug resistance in breast cancer cells.

Nanoclay-based 3D printed scaffolds promote vascular ingrowth ex vivo and generate bone mineral tissue in vitro and in vivo

Acellular soft hydrogels are not ideal for hard tissue engineering given their poor mechanical stability, however, in combination with cellular components offer significant promise for tissue regeneration. Indeed, nanocomposite bioinks provide an attractive platform to deliver human bone marrow stromal cells (HBMSCs) in three dimensions producing cell-laden constructs that aim to facilitate bone repair and functionality. Here we present the in vitro, ex vivo and in vivo investigation of bioprinted HBMSCs encapsulated in a nanoclay-based bioink to produce viable and functional three-dimensional constructs. HBMSC-laden constructs remained viable over 21 d in vitro and immediately functional when conditioned with osteogenic media. 3D scaffolds seeded with human umbilical vein endothelial cells (HUVECs) and loaded with vascular endothelial growth factor (VEGF) implanted ex vivo into a chick chorioallantoic membrane (CAM) model showed integration and vascularisation after 7 d of incubation. In a pre-clinical in vivo application of a nanoclay-based bioink to regenerate skeletal tissue, we demonstrated bone morphogenetic protein-2 (BMP-2) absorbed scaffolds produced extensive mineralisation after 4 weeks (p < 0.0001) compared to the drug-free and alginate controls. In addition, HBMSC-laden 3D printed scaffolds were found to significantly (p < 0.0001) support bone tissue formation in vivo compared to acellular and cast scaffolds. These studies illustrate the potential of nanoclay-based bioink, to produce viable and functional constructs for clinically relevant skeletal tissue regeneration.

Nanoclay-functionalized 3D nanofibrous scaffolds promote bone regeneration

Developing a biomaterial that can promote osteoblastic differentiation, thereby reducing the needs of exogenous osteogenic factors for large bone repair, has been a significant and long-term technical hurdle. In this study, we developed an innovative nanoclay (nanosilicate, NS)-functionalized 3D gelatin nanofibrous scaffold (GF/NS) through a thermally induced phase separation method together with the particle leaching technique (TIPS&P). In addition to the significantly higher mechanical strength, the composite scaffolds (GF/NS) demonstrated a significantly stronger ability to promote the osteogenic differentiation of human mesenchymal stem cells (hMSCs) in vitro compared to the GF scaffold. Our data further revealed that this intriguing pro-osteoblastic functionality was largely because of the unique features of NS, particularly, the strong binding ability to pro-osteoblastic factors (e.g., BMP2) as well as the intrinsic osteoinductivity of its bioactive degradation products. Most importantly, our in vivo studies indicated that GF/NS scaffolds significantly improved low-dose BMP2-induced ectopic bone regeneration in mice.