Traditional Invasive and Synchrotron-Based Noninvasive Assessments of Three-Dimensional-Printed Hybrid Cartilage Constructs In Situ

Integrating bioprinting, cell therapies and drug delivery towards in vivo regeneration of cartilage, bone and osteochondral tissue

The biological and biomechanical functions of cartilage, bone and osteochondral tissue are naturally orchestrated by a complex crosstalk between zonally dependent cells and extracellular matrix components. In fact, this crosstalk involves biomechanical signals and the release of biochemical cues that direct cell fate and regulate tissue morphogenesis and remodelling in vivo. Three-dimensional bioprinting introduced a paradigm shift in tissue engineering and regenerative medicine, since it allows to mimic native tissue anisotropy introducing compositional and architectural gradients. Moreover, the growing synergy between bioprinting and drug delivery may enable to replicate cell/extracellular matrix reciprocity and dynamics by the careful control of the spatial and temporal patterning of bioactive cues. Although significant advances have been made in this direction, unmet challenges and open research questions persist. These include, among others, the optimization of scaffold zonality and architectural features; the preservation of the bioactivity of loaded active molecules, as well as their spatio-temporal release; the in vitro scaffold maturation prior to implantation; the pros and cons of each animal model and the graft-defect mismatch; and the in vivo non-invasive monitoring of new tissue formation. This work critically reviews these aspects and reveals the state of the art of using three-dimensional bioprinting, and its synergy with drug delivery technologies, to pattern the distribution of cells and/or active molecules in cartilage, bone and osteochondral engineered tissues. Most notably, this work focuses on approaches, technologies and biomaterials that are currently under in vivo investigations, as these give important insights on scaffold performance at the implantation site and its interaction/integration with surrounding tissues.

MRI overestimates articular cartilage thickness and volume compared to synchrotron radiation phase-contrast imaging

Accurate evaluation of morphological changes in articular cartilage are necessary for early detection of osteoarthritis (OA). 3T magnetic resonance imaging (MRI) has highly sensitive contrast resolution and is widely used clinically to detect OA. However, synchrotron radiation phase-contrast imaging computed tomography (SR-PCI) can also provide contrast to tissue interfaces that do not have sufficient absorption differences, with the added benefit of very high spatial resolution. Here, MRI was compared with SR-PCI for quantitative evaluation of human articular cartilage. Medial tibial condyles were harvested from non-OA donors and from OA patients receiving knee replacement surgery. Both imaging methods revealed that average cartilage thickness and cartilage volume were significantly reduced in the OA group, compared to the non-OA group. When comparing modalities, the superior resolution of SR-PCI enabled more precise mapping of the cartilage surface relative to MRI. As a result, MRI showed significantly higher average cartilage thickness and cartilage volume, compared to SR-PCI. These data highlight the potential for high-resolution imaging of articular cartilage using SR-PCI as a solution for early OA diagnosis. Recognizing current limitations of using a synchrotron for clinical imaging, we discuss its nascent utility for preclinical models, particularly longitudinal studies of live animal models of OA.

Low-density tissue scaffold imaging by synchrotron radiation propagation-based imaging computed tomography with helical acquisition mode

Visualization of low-density tissue scaffolds made from hydrogels is important yet challenging in tissue engineering and regenerative medicine (TERM). For this, synchrotron radiation propagation-based imaging computed tomography (SR-PBI-CT) has great potential, but is limited due to the ring artifacts commonly observed in SR-PBI-CT images. To address this issue, this study focuses on the integration of SR-PBI-CT and helical acquisition mode (i.e. SR-PBI-HCT) to visualize hydrogel scaffolds. The influence of key imaging parameters on the image quality of hydrogel scaffolds was investigated, including the helical pitch (p), photon energy (E) and the number of acquisition projections per rotation/revolution (N_p), and, on this basis, those parameters were optimized to improve image quality and to reduce noise level and artifacts. The results illustrate that SR-PBI-HCT imaging shows impressive advantages in avoiding ring artifacts with p = 1.5, E = 30 keV and N_p = 500 for the visualization of hydrogel scaffolds in vitro. Furthermore, the results also demonstrate that hydrogel scaffolds can be visualized using SR-PBI-HCT with good contrast while at a low radiation dose, i.e. 342 mGy (voxel size of 26 µm, suitable for in vivo imaging). This paper presents a systematic study on hydrogel scaffold imaging using SR-PBI-HCT and the results reveal that SR-PBI-HCT is a powerful tool for visualizing and characterizing low-density scaffolds with a high image quality in vitro. This work represents a significant advance toward the non-invasive in vivo visualization and characterization of hydrogel scaffolds at a suitable radiation dose.

Advances in Algin and Alginate-Hybrid Materials for Drug Delivery and Tissue Engineering

In this review, we aim to provide a summary of recent research advancements and applications of algin (i.e., alginic acid) and alginate-hybrid materials (AHMs) in medical fields. Algin/alginate are abundant natural products that are chemically inert and biocompatible, and they have superior gelation properties, good mechanical strengths, and biodegradability. The AHMs have been widely applied in wound dressing, cell culture, tissue engineering, and drug delivery. However, medical applications in different fields require different properties in the AHMs. The drug delivery application requires AHMs to provide optimal drug loading, controlled and targeted drug-releasing, and/or visually guided drug delivery. AHMs for wound dressing application need to have improved mechanical properties, hydrophilicity, cell adhesion, and antibacterial properties. AHMs for tissue engineering need improved mechanical properties that match the target organs, superior cell affinity, and cell loading capacity. Various methods to produce AHMs that meet different needs were summarized. Formulations to form AHMs with improved stability, drug/cell-loading capacity, cell adhesion, and mechanical properties are active research areas. This review serves as a road map to provide insights into the strategies to develop AHMs in medical applications.

Systematic review on the application of 3D-bioprinting technology in orthoregeneration: current achievements and open challenges

BACKGROUND

Joint degeneration and large or complex bone defects are a significant source of morbidity and diminished quality of life worldwide. There is an unmet need for a functional implant with near-native biomechanical properties. The potential for their generation using 3D bioprinting (3DBP)-based tissue engineering methods was assessed. We systematically reviewed the current state of 3DBP in orthoregeneration.

METHODS

This review was performed using PubMed and Web of Science. Primary research articles reporting 3DBP of cartilage, bone, vasculature, and their osteochondral and vascular bone composites were considered. Full text English articles were analyzed.

RESULTS

Over 1300 studies were retrieved, after removing duplicates, 1046 studies remained. After inclusion and exclusion criteria were applied, 114 articles were analyzed fully. Bioink material types and combinations were tallied. Cell types and testing methods were also analyzed. Nearly all papers determined the effect of 3DBP on cell survival. Bioink material physical characterization using gelation and rheology, and construct biomechanics were performed. In vitro testing methods assessed biochemistry, markers of extracellular matrix production and/or cell differentiation into respective lineages. In vivo proof-of-concept studies included full-thickness bone and joint defects as well as subcutaneous implantation in rodents followed by histological and µCT analyses to demonstrate implant growth and integration into surrounding native tissues.

CONCLUSIONS

Despite its relative infancy, 3DBP is making an impact in joint and bone engineering. Several groups have demonstrated preclinical efficacy of mechanically robust constructs which integrate into articular joint defects in small animals. However, notable obstacles remain. Notably, researchers encountered pitfalls in scaling up constructs and establishing implant function and viability in long term animal models. Further, to translate from the laboratory to the clinic, standardized quality control metrics such as construct stiffness and graft integration metrics should be established with investigator consensus. While there is much work to be done, 3DBP implants have great potential to treat degenerative joint diseases and provide benefit to patients globally.

Printability and Cell Viability in Extrusion-Based Bioprinting from Experimental, Computational, and Machine Learning Views

Extrusion bioprinting is an emerging technology to apply biomaterials precisely with living cells (referred to as bioink) layer by layer to create three-dimensional (3D) functional constructs for tissue engineering. Printability and cell viability are two critical issues in the extrusion bioprinting process; printability refers to the capacity to form and maintain reproducible 3D structure and cell viability characterizes the amount or percentage of survival cells during printing. Research reveals that both printability and cell viability can be affected by various parameters associated with the construct design, bioinks, and bioprinting process. This paper briefly reviews the literature with the aim to identify the affecting parameters and highlight the methods or strategies for rigorously determining or optimizing them for improved printability and cell viability. This paper presents the review and discussion mainly from experimental, computational, and machine learning (ML) views, given their promising in this field. It is envisioned that ML will be a powerful tool to advance bioprinting for tissue engineering.

[Research progress of in-situ three dimensional bio-printing technology for repairing bone and cartilage injuries]

OBJECTIVE

To review the research progress of in-situ three dimensional (3D) bio-printing technology in the repair of bone and cartilage injuries.

METHODS

Literature on the application of in-situ 3D bio-printing technology to repair bone and cartilage injuries at home and abroad in recent years was reviewed, analyzed, and summarized.

RESULTS

As a new tissue engineering technology, in-situ 3D bio-printing technology is mainly applied to repair bone, cartilage, and skin tissue injuries. By combining biomaterials, bioactive substances, and cells, tissue is printed directly at the site of injury or defect. At present, the research on the technology mainly focuses on printing mode, bio-ink, and printing technology; the application research in the field of bone and cartilage mainly focuses on pre-vascularization, adjusting the composition of bio-ink, improving scaffold structure, printing technology, loading drugs, cells, and bioactive factors, so as to promote tissue injury repair.

CONCLUSION

Multiple animal experiments have confirmed that in-situ 3D bio-printing technology can construct bone and cartilage tissue grafts in a real-time, rapid, and minimally invasive manner. In the future, it is necessary to continue to develop bio-inks suitable for specific tissue grafts, as well as combine with robotics, fusion imaging, and computer-aided medicine to improve printing efficiency.

Fabrication of chitosan/alginate/hydroxyapatite hybrid scaffolds using 3D printing and impregnating techniques for potential cartilage regeneration

Three-dimensional (3D) printed hydrogel scaffolds enhanced with ceramics have shown potential applications for cartilage regeneration, but leaving biological and mechanical properties to be desired. This paper presents our study on the development of chitosan /alginate scaffolds with nano hydroxyapatite (nHA) by combining 3D printing and impregnating techniques, forming a hybrid, yet novel, structure of scaffolds for potential cartilage regeneration. First, we incorporated nHA into chitosan scaffold printing and studied the printability by examining the difference between the printed scaffolds and their designs. Then, we impregnated alginate with nHA into the printed chitosan scaffolds to forming a hybrid structure of scaffolds; and then characterized the scaffolds mechanically and biologically, with a focus on identifying the influence of nHA and alginate for potential cartilage regeneration. The results of compression tests on the scaffolds showed that the inclusion of nHA increased the elastic moduli of scaffolds; while the live/dead assay illustrated that nHA had a great effect on improving attachment and viability of ATCD5 cells on the scaffolds. Also, our results illustrated scaffolds with nHA impregnated in alginate hydrogel enhanced the cell viability and attachment. Furthermore, antibacterial activity of hybrid scaffolds was characterized with results indicating that the chitosan scaffolds had favourable antibacterial ability, which was further enhanced with the impregnated nHA. Taken together, our study has illustrated that chitosan/HA/alginate hybrid scaffolds are promising for cartilage regeneration and the methods developed to create hybrid scaffolds based on 3D printing and impregnating techniques, which can also be extended to fabricating scaffolds for other tissue engineering applications.

Cartilage Tissue Engineering Approaches Need to Assess Fibrocartilage When Hydrogel Constructs Are Mechanically Loaded

Chondrocytes that are impregnated within hydrogel constructs sense applied mechanical force and can respond by expressing collagens, which are deposited into the extracellular matrix (ECM). The intention of most cartilage tissue engineering is to form hyaline cartilage, but if mechanical stimulation pushes the ratio of collagen type I (Col1) to collagen type II (Col2) in the ECM too high, then fibrocartilage can form instead. With a focus on Col1 and Col2 expression, the first part of this article reviews the latest studies on hyaline cartilage regeneration within hydrogel constructs that are subjected to compression forces (one of the major types of the forces within joints) in vitro. Since the mechanical loading conditions involving compression and other forces in joints are difficult to reproduce in vitro, implantation of hydrogel constructs in vivo is also reviewed, again with a focus on Col1 and Col2 production within the newly formed cartilage. Furthermore, mechanotransduction pathways that may be related to the expression of Col1 and Col2 within chondrocytes are reviewed and examined. Also, two recently-emerged, novel approaches of load-shielding and synchrotron radiation (SR)–based imaging techniques are discussed and highlighted for future applications to the regeneration of hyaline cartilage. Going forward, all cartilage tissue engineering experiments should assess thoroughly whether fibrocartilage or hyaline cartilage is formed.

Characterization of Tissue Scaffolds Using Synchrotron Radiation Microcomputed Tomography Imaging

Distinguishing from other traditional imaging, synchrotron radiation microcomputed tomography (SR-μCT) imaging allows for the visualization of three-dimensional objects of interest in a nondestructive and/or in situ way with better spatial resolution, deep penetration, relatively fast speed, and/or high contrast. SR-μCT has been illustrated promising for visualizing and characterizing tissue scaffolds for repairing or replacing damaged tissue or organs in tissue engineering (TE), which is of particular advance for longitudinal monitoring and tracking the success of scaffolds once implanted in animal models and/or human patients. This article presents a comprehensive review on recent studies of characterization of scaffolds based on SR-μCT and takes scaffold architectural properties, mechanical properties, degradation, swelling and wettability, and biological properties as five separate sections to introduce SR-μCT wide applications. We also discuss and highlight the unique opportunities of SR-μCT in various TE applications; conclude this article with the suggested future research directions, including the prospective applications of SR-μCT, along with its challenges and methods for improvement in the field of TE.

Analysis of type I osteoporosis animal models using synchrotron radiation

Preclinical experiments to analyze the trabecular space of spongy bones using small animals are required for the evaluation and treatment of patients with osteoporosis (OP). We performed ovariectomy to create OP models. A total of four mice were used. Ovariectomized group (OVX, n = 2) in which both ovaries were resected at random, and the sham operated group (SHAM, n = 2) performed surgery without resecting the ovaries. We propose a study that enables OP analysis by analyzing tibia microstructures of OVX and SHAM using synchrotron radiation (SR). SR imaging is a technology capable of irradiating an extremely small object in the order of several tens of nanometers using a nondestructive method at the microscopic level. Unlike previous imaging diagnoses (staining, micro-CT [Computed Tomography]) it was possible to preserve the real shape and analyze bone microstructures in real-time and analyze and evaluate spongy bones to secure data and increase the reliability of OP analysis. We were able to confirm the possibility of OP diagnosis through experimental animals for spongy bone damage related to bone mineral density. Therefore, we aimed to provide a rehabilitation and medicine therapy intervention method through basic research on the evaluation of OP diagnosis through human-based segmentation of challenging spongy bones while supplementing the limitations of existing imaging methods. RESEARCH HIGHLIGHTS: We present an analysis of osteoporosis through spongy bone using phase-contrast X-ray source. Unlike existing methods, it is possible to analyze the internal microstructure of the tibia with this method. This is an objective mechanism for OP and a basis for rehabilitation.

Thermosensitive alginate-gelatin-nitrogen-doped carbon dots scaffolds as potential injectable hydrogels for cartilage tissue engineering applications

Hybrid injectable and biodegradable hydrogels based on oxidized alginate/gelatin and containing nitrogen-doped carbon dots (NCDs) as a reinforcement have been fabricated and crosslinked by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC)/N-hydroxysuccinimide (NHS) as the chemical crosslinking agents in the hydrogel system. The idea of composite hydrogels relies on the assumption that they supply a microenvironment that is convenient for the exchange of nutrients via a porous structure and cell proliferation and have mechanical characteristics that approximately match natural tissue. The effect of the NCD content on the morphology structure, mechanical strength, swelling ratio, and biodegradation has been investigated. The results indicate that nanocomposite hydrogels containing a higher content of NCDs have smaller pore sizes and higher mechanical properties. The in vitro biodegradation and swelling behavior demonstrated that increasing the amount of NCDs up to 0.06% decreased the swelling ratio and weight loss of the hydrogels. The composite hydrogels are biocompatible, as verified by the MTT assay of MG-63 cells. The N-doped graphene quantum dots considerably affect degradation and interaction within the cells and hydrogels.

The low gelation time (120 s) and gelation temperature at body temperature (37 °C) make oxidized alginate/gelatin/NCDs hydrogels suitable as temperature-sensitive injectable hydrogels for cartilage tissue engineering.

Injectable hydrogels based on oxidized alginate-gelatin reinforced by carbon nitride quantum dots for tissue engineering

Stem cell treatment is promising in the various disorders treatment, but its effect is confined by the adverse conditions in the damaged tissues. The utilization of hydrogels has been suggested as a procedure to defeat this issue by developing the engraftment and survival of injected stem cells. Specifically, injectable hydrogels have drawn much attention due to their shape adaptability, ease of use, and the capability to reach body parts that are hard to access. In this study, the thermosensitive injectable hydrogels based on oxidized alginate, gelatin, and carbon nitride quantum dots (CNQDs) have been fabricated for tissue engineering. The mechanical characteristics of the nanocomposite hydrogels were investigated by rheology analysis. The results show that increasing the amount of CNQDs improve the mechanical strength of the nanocomposite hydrogels. The Cross-section morphology of freeze dried hydrogels comprising 0.25, 1.5, and 3.0% CNQDs indicate porous structure with interrelated pores. Besides, the result of in vitro degradation reveals that the hydrogels comprising CNQDs are more durable than the one without CNQDs. A reduction in the biodegradation and swelling ratio is perceived with the addition of CNQDs. The cell viability and attachment show that the nanocomposite hydrogels are biocompatible (>88%) with great cell adhesion to osteosarcoma cell line MG63 depending on the presence of CNQDs.

Three-Dimensional Bioprinting of Articular Cartilage: A Systematic Review

OBJECTIVE

Treatment of chondral injury is clinically challenging. Available chondral repair/regeneration techniques have significant shortcomings. A viable and durable tissue engineering strategy for articular cartilage repair remains an unmet need. Our objective was to systematically evaluate the published data on bioprinted articular cartilage with regards to scaffold-based, scaffold-free and in situ cartilage bioprinting.

DESIGN

We performed a systematic review of studies using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. PubMed and ScienceDirect databases were searched and all articles evaluating the use of 3-dimensional (3D) bioprinting in articular cartilage were included. Inclusion criteria included studies written in or translated to English, published in a peer-reviewed journal, and specifically discussing bioinks and/or bioprinting of living cells related to articular cartilage applications. Review papers, articles in a foreign language, and studies not involving bioprinting of living cells related to articular cartilage applications were excluded.

RESULTS

Twenty-seven studies for articular cartilage bioprinting were identified that met inclusion and exclusion criteria. The technologies, materials, cell types used in these studies, and the biological and physical properties of the created constructs have been demonstrated.

CONCLUSION

These 27 studies have demonstrated 3D bioprinting of articular cartilage to be a tissue engineering strategy that has tremendous potential translational value. The unique abilities of the varied techniques allow replication of mechanical properties and advances toward zonal differentiation. This review demonstrates that bioprinting has great capacity for clinical cartilage reconstruction and future in vivo implantation.

Mechanical properties of tissue formed in vivo are affected by 3D-bioplotted scaffold microarchitecture and correlate with ECM collagen fiber alignment

Purpose: Musculoskeletal soft tissues possess highly aligned extracellular collagenous networks that provide structure and strength. Such an organization dictates tissue-specific mechanical properties but can be difficult to replicate by engineered biological substitutes. Nanofibrous electrospun scaffolds have demonstrated the ability to control cell-secreted collagen alignment, but concerns exist regarding their scalability for larger and anatomically relevant applications. Additive manufacturing processes, such as melt extrusion-based 3D-Bioplotting, allow fabrication of structurally relevant scaffolds featuring highly controllable porous microarchitectures.Materials and Methods: In this study, we investigate the effects of 3D-bioplotted scaffold design on the compressive elastic modulus of neotissue formed in vivo in a subcutaneous rat model and its correlation with the alignment of ECM collagen fibers. Polycaprolactone scaffolds featuring either 100 or 400 µm interstrand spacing were implanted for 4 or 12 weeks, harvested, cryosectioned, and characterized using atomic-force-microscopy-based force mapping.Results: The compressive elastic modulus of the neotissue formed within the 100 µm design was significantly higher at 4 weeks (p < 0.05), but no differences were observed at 12 weeks. In general, the tissue stiffness was within the same order of magnitude and range of values measured in native musculoskeletal soft tissues including the porcine meniscus and anterior cruciate ligament. Finally, a significant positive correlation was noted between tissue stiffness and the degree of ECM collagen fiber alignment (p < 0.05) resulting from contact guidance provided by scaffold strands.Conclusion: These findings demonstrate the significant effects of 3D-bioplotted scaffold microarchitectures in the organization and sub-tissue-level mechanical properties of ECM in vivo.

X-ray computed tomography in life sciences

Recent developments within micro-computed tomography (μCT) imaging have combined to extend our capacity to image tissue in three (3D) and four (4D) dimensions at micron and sub-micron spatial resolutions, opening the way for virtual histology, live cell imaging, subcellular imaging and correlative microscopy. Pivotal to this has been the development of methods to extend the contrast achievable for soft tissue. Herein, we review the new capabilities within the field of life sciences imaging, and consider how future developments in this field could further benefit the life sciences community.

Evolutionary repression of chondrogenic genes in the vertebrate osteoblast

Gene expression in extant animals might reveal how skeletal cells have evolved over the past 500 million years. The cells that make up cartilage (chondrocytes) and bone (osteoblasts) express many of the same genes, but they also have important molecular differences that allow us to distinguish them as separate cell types. For example, traditional studies of later-diverged vertebrates, such as mouse and chick, defined the genes Col2a1 and sex-determining region Y-box 9 as cartilage-specific. However, recent studies have shown that osteoblasts of earlier-diverged vertebrates, such as frog, gar, and zebrafish, express these 'chondrogenic' markers. In this review, we examine the resulting hypothesis that chondrogenic gene expression became repressed in osteoblasts over evolutionary time. The amphibian is an underexplored skeletal model that is uniquely positioned to address this hypothesis, especially given that it diverged when life transitioned from water to land. Given the relationship between phylogeny and ontogeny, a novel discovery for skeletal cell evolution might bolster our understanding of skeletal cell development.

Review of alginate-based hydrogel bioprinting for application in tissue engineering

The dawn of 3D printing in medicine has given the field the hope of vitality in many patients fighting a multitude of diseases. Also entitled bioprinting, this appertains to its sequential printing of precursor ink, embodying cells and polymer/composite in a predetermined trajectory. The precursor ink, in addition to cells, is predominantly constituted of hydrogels due to its biodegradability and ability to mimic the body's anatomy and mechanical features, e.g. bones, etc. This review paper is devoted to explicating the bioprinting (3D/4D) of alginate hydrogels, which are extracts from brown algae, through extrusion additive manufacturing. Alginates are salt derivatives of alginic acid and constitute long chains of polysaccharides, which provides pliability and gelling adeptness to their structure. Alginate hydrogel (employed for extrusion) can be pristine or composite relying on the requisite properties (target application controlled or in vivo environment), e.g. alginate-natural (gelatin/agarose/collagen/hyaluronic acid/etc) and alginate-synthetic (polyethylene glycol (PEG)/pluronic F-127/etc). Extrusion additive manufacturing of alginate is preponderate among others with its uncomplicated processing, material efficiency (cut down on wastage), and outspread adaptability for viscosities (0.03-6 * 10⁴ Pa.s), but the procedure is limited by resolution (200 μm) in addition to accuracy. However, 3D-fabricated biostructures display rigidness (unvarying with conditions) i.e. lacks a smart response, which is reassured by accounting time feature as a noteworthy accessory to printing, interpreted as 4D bioprinting. This review propounds the specific processing itinerary for alginate (meanwhile traversing across its composites/blends with natural and synthetic consideration) in extrusion along with its pre-/during/post-processing parameters intrinsic to the process. Furthermore, propensity is also presented in its (alginate extrusion processing) application for tissue engineering, i.e. bones, cartilage (joints), brain (neural), ear, heart (cardiac), eyes (corneal), etc, due to a worldwide quandary over accessibility to natural organs for diverse types of diseases. Additionally, the review contemplates recently invented advance printing, i.e. 4D printing for biotic species, with its challenges and future opportunities.

Homogeneous hydroxyapatite/alginate composite hydrogel promotes calcified cartilage matrix deposition with potential for three-dimensional bioprinting

Calcified cartilage regeneration plays an important role in successful osteochondral repair, since it provides a biological and mechanical transition from the unmineralized cartilage at the articulating surface to the underlying mineralized bone. To biomimic native calcified cartilage in engineered constructs, here we test the hypothesis that hydroxyapatite (HAP) stimulates chondrocytes to secrete the characteristic matrix of calcified cartilage. Sodium citrate (SC) was added as a dispersant of HAP within alginate (ALG), and homogeneous dispersal of HAP within ALG hydrogel was confirmed using sedimentation tests, electron microscopy, and energy dispersive spectroscopy. To examine the biological performance of ALG/HAP composites, chondrocyte survival and proliferation, extracellular matrix production, and mineralization potential were evaluated in the presence or absence of the HAP phase. Chondrocytes in ALG/HAP constructs survived well and proliferated, but also expressed higher levels of calcified cartilage markers compared to controls, including Collagen type X secretion, alkaline phosphatase (ALP) activity, and mineral deposition. Compared to controls, ALG/HAP constructs also showed an elevated level of mineralized matrix in vivo when implanted subcutaneously in mice. The printability of ALG/HAP composite hydrogel precursors was verified by 3D printing of ALG/HAP hydrogel scaffolds with a porous structure. In summary, these results confirm the hypothesis that HAP in ALG hydrogel stimulates chondrocytes to secrete calcified matrix in vitro and in vivo and reveal that ALG/HAP composites have the potential for 3D bioprinting and osteochondral regeneration.

Reversible physical crosslinking strategy with optimal temperature for 3D bioprinting of human chondrocyte-laden gelatin methacryloyl bioink

Gelatin methacryloyl is a promising material in tissue engineering and has been widely studied in three-dimensional bioprinting. Although gelatin methacryloyl possesses excellent biocompatibility and tunable mechanical properties, its poor printability/processability has hindered its further applications. In this study, we report a reversible physical crosslinking strategy for precise deposition of human chondrocyte-laden gelatin methacryloyl bioink at low concentration without any sacrificial material by using extrusive three-dimensional bioprinting. The precise printing temperature was determined by the rheological properties of gelatin methacryloyl with temperature. Ten percent (w/v) gelatin methacryloyl was chosen as the printing formula due to highest biocompatibility in three-dimensional cell cultures in gelatin methacryloyl hydrogel disks. Primary human chondrocyte-laden 10% (w/v) gelatin methacryloyl was successfully printed without any construct deformation or collapse and was permanently crosslinked by ultraviolet light. The printed gelatin methacryloyl hydrogel constructs remained stable in long-term culture. Chondrocyte viability and proliferation that were printed under this optimal temperature were better than that of chondrocytes printed under lower temperatures and were similar to that of chondrocytes in the non-printed gelatin methacryloyl hydrogels. The results indicate that with this strategy, 10% (w/v) gelatin methacryloyl bioink presented excellent printability and printing resolution with high cell viability, which appears to be suitable for printing primary human chondrocytes in cartilage biofabrication and can be extensively applied in tissue engineering of other organs or in other biomedical fields.

Simultaneous visualisation of calcified bone microstructure and intracortical vasculature using synchrotron X-ray phase contrast-enhanced tomography

3D imaging of the bone vasculature is of key importance in the understanding of skeletal disease. As blood vessels in bone are deeply encased in the calcified matrix, imaging techniques that are applicable to soft tissues are generally difficult or impossible to apply to the skeleton. While canals in cortical bone can readily be identified and characterised in X-ray computed tomographic data in 3D, the soft tissue comprising blood vessels that are putatively contained within the canal structures does not provide sufficient image contrast necessary for image segmentation. Here, we report an approach that allows for rapid, simultaneous visualisation of calcified bone tissue and the vasculature within the calcified bone matrix. Using synchrotron X-ray phase contrast-enhanced tomography we show exemplar data with intracortical capillaries uncovered at sub-micrometre level without the need for any staining or contrast agent. Using the tibiofibular junction of 15 week-old C57BL/6 mice post mortem, we show the bone cortical porosity simultaneously along with the soft tissue comprising the vasculature. Validation with histology confirms that we can resolve individual capillaries. This imaging approach could be easily applied to other skeletal sites and transgenic models, and could improve our understanding of the role the vasculature plays in bone disease.