Co-culture Model for Cutaneous Wound Healing to Assess a Porous Fiber-Based Drug Delivery System

High glucose-induced endothelial STING activation inhibits diabetic wound healing through impairment of angiogenesis

Chronic hyperglycemia-induced impairment of angiogenesis is important in diabetic foot ulcer (DFU). Additionally, the stimulator of interferon gene (STING), which is a key protein in innate immunity, mediates palmitic acid-induced lipotoxicity in metabolic diseases through oxidative stress-induced STING activation. However, the role of STING in DFU is unknown. In this study, we established a DFU mouse model with streptozotocin (STZ) injection and found that the expression of STING was significantly increased in the vascular endothelial cells of wound tissues from diabetic patients and in the STZ-induced diabetic mouse model. We further established high glucose (HG)-induced endothelial dysfunction with rat vascular endothelial cells and found that the expression of STING was also increased by high-glucose treatment. Moreover, the STING inhibitor, C176, promoted diabetic wound healing, whereas the STING activator, DMXAA, inhibited diabetic wound healing. Consistently, STING inhibition reversed the HG-induced reduction of CD31 and vascular endothelial growth factor (VEGF), inhibited apoptosis, and promoted migration of endothelial cells. Notably, DMXAA treatment alone was sufficient to induce endothelial cell dysfunction as a high-glucose treatment. Mechanistically, STING mediated HG-induced vascular endothelial cell dysfunction by activating the interferon regulatory factor 3/nuclear factor kappa B pathway. In conclusion, our study reveals an endothelial STING activation-mediated molecular mechanism in the pathogenesis of DFU and identifies STING as a novel potential therapeutic target for DFU.

Towards a More Realistic In Vitro Meat: The Cross Talk between Adipose and Muscle Cells

According to statistics and future predictions, meat consumption will increase in the coming years. Considering both the environmental impact of intensive livestock farming and the importance of protecting animal welfare, the necessity of finding alternative strategies to satisfy the growing meat demand is compelling. Biotechnologies are responding to this demand by developing new strategies for producing meat in vitro. The manufacturing of cultured meat has faced criticism concerning, above all, the practical issues of culturing together different cell types typical of meat that are partly responsible for meat’s organoleptic characteristics. Indeed, the existence of a cross talk between adipose and muscle cells has critical effects on the outcome of the co-culture, leading to a general inhibition of myogenesis in favor of adipogenic differentiation. This review aims to clarify the main mechanisms and the key molecules involved in this cross talk and provide an overview of the most recent and successful meat culture 3D strategies for overcoming this challenge, focusing on the approaches based on farm-animal-derived cells.

Progress and opportunities in Gellan gum-based materials: A review of preparation, characterization and emerging applications

Gellan gum, a microbial exopolysaccharide, is biodegradable and has potential to fill several key roles in many fields from food to pharmacy, biomedicine and tissue engineering. In order to improve the physicochemical and biological properties of gellan gum, some researchers take advantage of numerous hydroxyl groups and the free carboxyl present in each repeating unit. As a result, design and development of gellan-based materials have advanced significantly. The goal of this review is to provide a summary of the most recent, high-quality research trends that have used gellan gum as a polymeric component in the design of numerous cutting-edge materials with applications in various fields.

Solvent Casting and UV Photocuring for Easy and Safe Fabrication of Nanocomposite Film Dressings

The aim of this work was to optimize and characterize nanocomposite films based on gellan gum methacrylate (GG-MA) and silver nanoparticles (AgNPs) for application in the field of wound dressing. The films were produced using the solvent casting technique coupled with a photocuring process. The UV irradiation of GG-MA solutions containing glycerol as a plasticizer and different amounts of silver nitrate resulted in the concurrent crosslinking of the photocurable polymer and a reduction of Ag ions with consequent in situ generation of AgNPs. In the first part of the work, the composition of the films was optimized, varying the concentration of the different components, the GG-MA/glycerol and GG-MA/silver nitrate weight ratios as well as the volume of the film-forming mixture. Rheological analyses were performed on the starting solutions, whereas the obtained films were characterized for their mechanical properties. Colorimetric analyses and swelling studies were also performed in order to determine the AgNPs release and the water uptake capacity of the films. Finally, microbiological tests were carried out to evaluate the antimicrobial efficacy of the optimized films, in order to demonstrate their possible application as dressings for the treatment of infected hard-to-heal wounds, which is a demanding task for public healthcare.

A standardized g-force allows the preparation of similar PRF qualities regardless of rotor angle

Platelet rich fibrin (PRF) is an autologous blood concentrate, that supports tissue regeneration. The effect of the centrifuge rotor angle in the fabrication of PRF is still not fully elucidated. The hypothesis of this study is: When applying the same g-force {relative centrifugal force (RCF)} and centrifugation time, PRF components and bioactivity are not modified using either a swing-out or fixed angle rotor. For this purpose, peripheral blood samples (five donors )were used to gain solid matrices (710 xg, 8 minutes) and liquid (44 xg, 8 minutes) PRF matrices using three different centrifuges (one fixed angle as a control; and two different swingout rotor centrifuges). The physical characteristics of the solid PRF were measured to evaluate the clot formation and cellular distribution. Liquid PRF was used to evaluate the cell number, bioactivity and influence on primary human osteoblasts and fibroblasts in vitro. Solid PRF clots were significantly larger in the group of fixed rotor centrifuges compared to either of the two evaluated swing-out rotor centrifuges. No differences were observed when evaluating the cellular distribution within the solid No statistically significant differences were documented in the cell's density in liquid PRF samples (platelets, lymphocytes, neutrophils, eosinophils, and basophils) among the differently gained PRF samples. No statistically significant differences were documented for the released growth factors (VEGF, EGF, TGF-β1) over 7 days. Primary human osteoblasts (pOBs) and primary human fibroblasts (pHFs) viability after treatment with PRF conditioned media showed no statistically significant differences between the evaluated groups. However, the number of adherent cells treated with PRF obtained with the use of the fixed angle rotor was significantly higher when compared to those treated with PRF obtained by using the swing-out rotors. The presented results confirmed that regardless of the centrifuge rotor used, the components and bioactivity of solid and liquid PRF matrices are modified by the applied RCF and centrifugation time. These findings are of great importance for highlighting the essential role of adapting the centrifugation protocols when using different centrifuges and to correctly report the used centrifugation protocols in scientific research to allow for reproducible results.

Recent applications of electrical, centrifugal, and pressurised emerging technologies for fibrous structure engineering in drug delivery, regenerative medicine and theranostics

Advancements in technology and material development in recent years has led to significant breakthroughs in the remit of fiber engineering. Conventional methods such as wet spinning, melt spinning, phase separation and template synthesis have been reported to develop fibrous structures for an array of applications. However, these methods have limitations with respect to processing conditions (e.g. high processing temperatures, shear stresses) and production (e.g. non-continuous fibers). The materials that can be processed using these methods are also limited, deterring their use in practical applications. Producing fibrous structures on a nanometer scale, in sync with the advancements in nanotechnology is another challenge met by these conventional methods. In this review we aim to present a brief overview of conventional methods of fiber fabrication and focus on the emerging fiber engineering techniques namely electrospinning, centrifugal spinning and pressurised gyration. This review will discuss the fundamental principles and factors governing each fabrication method and converge on the applications of the resulting spun fibers; specifically, in the drug delivery remit and in regenerative medicine.

Biologization of Pcl-Mesh Using Platelet Rich Fibrin (Prf) Enhances Its Regenerative Potential In Vitro

INTRODUCTION

Resorbable synthetic scaffolds are promising for different indications, especially in the context of bone regeneration. However, they require additional biological components to enhance their osteogenic potential. In addition to different cell types, autologous blood-derived matrices offer many advantages to enhance the regenerative capacity of biomaterials. The present study aimed to analyze whether biologization of a PCL-mesh coated using differently centrifuged Platelet rich fibrin (PRF) matrices will have a positive influence on primary human osteoblasts activity in vitro. A polymeric resorbable scaffold (Osteomesh, OsteoporeTM (OP), Singapore) was combined with differently centrifuged PRF matrices to evaluate the additional influence of this biologization concept on bone regeneration in vitro. Peripheral blood of three healthy donors was used to gain PRF matrices centrifuged either at High (710× g, 8 min) or Low (44× g, 8 min) relative centrifugal force (RCF) according to the low speed centrifugation concept (LSCC). OP-PRF constructs were cultured with pOBs. POBs cultured on the uncoated OP served as a control. After three and seven days of cultivation, cell culture supernatants were collected to analyze the pOBs activity by determining the concentrations of VEGF, TGF-β1, PDGF, OPG, IL-8, and ALP- activity. Immunofluorescence staining was used to evaluate the Osteopontin expression of pOBs. After three days, the group of OP+PRFLow+pOBs showed significantly higher expression of IL-8, TGF-ß1, PDGF, and VEGF compared to the group of OP+PRFHigh+pOBs and OP+pOBs. Similar results were observed on day 7. Moreover, OP+PRFLow+pOBs exhibited significantly higher activity of ALP compared to OP+PRFHigh+pOBs and OP+pOBs. Immunofluorescence staining showed a higher number of pOBs adherent to OP+PRFLow+pOBs compared to the groups OP+PRFHigh+pOBs and OP+pOBs. To the best of our knowledge, this study is the first to investigate the osteoblasts activity when cultured on a PRF-coated PCL-mesh in vitro. The presented results suggest that PRFLow centrifuged according to LSCC exhibits autologous blood cells and growth factors, seem to have a significant effect on osteogenesis. Thereby, the combination of OP with PRFLow showed promising results to support bone regeneration. Further in vivo studies are required to verify the results and carry out potential results for clinical translation.