Xenopus laevis (Daudin, 1802) as a Model Organism for Bioscience: A Historic Review and Perspective

In vitro systems have been mainly promoted by authorities to sustain research by following the 3Rs principle, but continuously increasing amounts of evidence point out that in vivo experimentation is also of extreme relevance. Xenopus laevis, an anuran amphibian, is a significant model organism in the study of evolutionary developmental biology, toxicology, ethology, neurobiology, endocrinology, immunology and tumor biology; thanks to the recent development of genome editing, it has also acquired a relevant position in the field of genetics. For these reasons, X. laevis appears to be a powerful and alternative model to the zebrafish for environmental and biomedical studies. Its life cycle, as well as the possibility to obtain gametes from adults during the whole year and embryos by in vitro fertilization, allows experimental studies of several biological endpoints, such as gametogenesis, embryogenesis, larval growth, metamorphosis and, of course, the young and adult stages. Moreover, with respect to alternative invertebrate and even vertebrate animal models, the X. laevis genome displays a higher degree of similarity with that of mammals. Here, we have reviewed the main available literature on the use of X. laevis in the biosciences and, inspired by Feymann's revised view, "Plenty of room for biology at the bottom", suggest that X. laevis is a very useful model for all possible studies.

The State of the Art and Challenges of In Vitro Methods for Human Hazard Assessment of Nanomaterials in the Context of Safe-by-Design

The Safe-by-Design (SbD) concept aims to facilitate the development of safer materials/products, safer production, and safer use and end-of-life by performing timely SbD interventions to reduce hazard, exposure, or both. Early hazard screening is a crucial first step in this process. In this review, for the first time, commonly used in vitro assays are evaluated for their suitability for SbD hazard testing of nanomaterials (NMs). The goal of SbD hazard testing is identifying hazard warnings in the early stages of innovation. For this purpose, assays should be simple, cost-effective, predictive, robust, and compatible. For several toxicological endpoints, there are indications that commonly used in vitro assays are able to predict hazard warnings. In addition to the evaluation of assays, this review provides insights into the effects of the choice of cell type, exposure and dispersion protocol, and the (in)accurate determination of dose delivered to cells on predictivity. Furthermore, compatibility of assays with challenging advanced materials and NMs released from nano-enabled products (NEPs) during the lifecycle is assessed, as these aspects are crucial for SbD hazard testing. To conclude, hazard screening of NMs is complex and joint efforts between innovators, scientists, and regulators are needed to further improve SbD hazard testing.

Comparing the Toxicological Responses of Pulmonary Air-Liquid Interface Models upon Exposure to Differentially Treated Carbon Fibers

In recent years, the use of carbon fibers (CFs) in various sectors of industry has been increasing. Despite the similarity of CF degradation products to other toxicologically relevant materials such as asbestos fibers and carbon nanotubes, a detailed toxicological evaluation of this class of material has yet to be performed. In this work, we exposed advanced air-liquid interface cell culture models of the human lung to CF. To simulate different stresses applied to CF throughout their life cycle, they were either mechanically (mCF) or thermo-mechanically pre-treated (tmCF). Different aspects of inhalation toxicity as well as their possible time-dependency were monitored. mCFs were found to induce a moderate inflammatory response, whereas tmCF elicited stronger inflammatory as well as apoptotic effects. Furthermore, thermal treatment changed the surface properties of the CF resulting in a presumed adhesion of the cells to the fiber fragments and subsequent cell loss. Triple-cultures encompassing epithelial, macrophage, and fibroblast cells stood out with an exceptionally high inflammatory response. Only a weak genotoxic effect was detected in the form of DNA strand breaks in mono- and co-cultures, with triple-cultures presenting a possible secondary genotoxicity. This work establishes CF fragments as a potentially harmful material and emphasizes the necessity of further toxicological assessment of existing and upcoming advanced CF-containing materials.

Carbon nanoparticles adversely affect CFTR expression and toxicologically relevant pathways

Cystic fibrosis is an autosomal recessive disorder caused by mutations in the cystic fibrosis transmembrane conductance regulator (CFTR) that can lead to terminal respiratory failure. Ultrafine carbonaceous particles, which are ubiquitous in ambient urban and indoor air, are increasingly considered as major contributors to the global health burden of air pollution. However, their effects on the expression of CFTR and associated genes in lung epithelial cells have not yet been investigated. We therefore evaluated the effects of carbon nanoparticles (CNP), generated by spark-ablation, on the human bronchial epithelial cell line 16HBE14o- at air-liquid interface (ALI) culture conditions. The ALI-cultured cells exhibited epithelial barrier integrity and increased CFTR expression. Following a 4-h exposure to CNP, the cells exhibited a decreased barrier integrity, as well as decreased expression of CFTR transcript and protein levels. Furthermore, transcriptomic analysis revealed that the CNP-exposed cells showed signs of oxidative stress, apoptosis and DNA damage. In conclusion, this study describes spark-ablated carbon nanoparticles in a realistic exposure of aerosols to decrease CFTR expression accompanied by transcriptomic signs of oxidative stress, apoptosis and DNA damage.

Toxicological effects of the mixed iron oxide nanoparticle (Fe3O4 NP) on murine fibroblasts LA-9

The increase in large-scale production of magnetic nanoparticles (NP) associated with the incomplete comprehensive knowledge regarding the potential risks of their use on environmental and human health makes it necessary to study the biological effects of these particles on organisms at the cellular level. The aim of this study to examine the cellular effects on fibroblast lineage LA-9 after exposure to mixed iron oxide NP (Fe₃O₄ NP). The following analyses were performed: field emission gun-scanning electron microscopy (SEM-FEG), dynamic light scattering (DLS), zeta potential, ultraviolet/visible region spectroscopy (UV/VIS), and attenuated total reactance-Fourier transform infrared (ATR-FTIR) spectroscopy analyses for characterization of the NP. The assays included cell viability, morphology, clonogenic potential, oxidative stress as measurement of reactive oxygen species (ROS) and nitric oxide (NO) levels, cytokines quantification interleukin 6 (IL-6) and tumor necrosis factor (TNF), NP uptake, and cell death. The size of Fe₃O₄ NP was 26.3 nm when evaluated in water through DLS. Fe₃O₄ NP did not reduce fibroblast cell viability until the highest concentration tested (250 µg/ml), which showed a decrease in clonogenic potential as well as small morphological changes after exposure for 48 and 72 hr. The NP concentration of 250 µg/ml induced enhanced ROS and NO production after 24 hr treatment. The uptake assay exhibited time-dependent Fe₃O₄ NP internalization at all concentrations tested with no significant cell death. Hence, exposure of fibroblasts to Fe₃O₄ NP-induced oxidative stress but not reduced cell viability or death. However, the decrease in the clonogenic potential at the highest concentration demonstrates cytotoxic effects attributed to Fe₃O₄ NP which occurred on the 7^th day after exposure.

In vitro toxicity of carbon nanotubes: a systematic review

Carbon nanotube (CNT) toxicity-related issues provoke many debates in the scientific community. The controversial and disputable data about toxicity doses, proposed hazard effects, and human health concerns significantly restrict CNT applications in biomedical studies, laboratory practices, and industry, creating a barrier for mankind in the way of understanding how exactly the material behaves in contact with living systems. Raising the toxicity question again, many research groups conclude low toxicity of the material and its potential safeness at some doses for contact with biological systems. To get new momentum for researchers working on the intersection of the biological field and nanomaterials, i.e., CNT materials, we systematically reviewed existing studies with in vitro toxicological data to propose exact doses that yield toxic effects, summarize studied cell types for a more thorough comparison, the impact of incubation time, and applied toxicity tests. Using several criteria and different scientific databases, we identified and analyzed nearly 200 original publications forming a "golden core" of the field to propose safe doses of the material based on a statistical analysis of retrieved data. We also differentiated the impact of various forms of CNTs: on a substrate and in the form of dispersion because in both cases, some studies demonstrated good biocompatibility of CNTs. We revealed that CNTs located on a substrate had negligible impact, i.e., 90% of studies report good viability and cell behavior similar to control, therefore CNTs could be considered as a prospective conductive substrate for cell cultivation. In the case of dispersions, our analysis revealed mean values of dose/incubation time to be 4-5 μg mL-1 h-1, which suggested the material to be a suitable candidate for further studies to get a more in-depth understanding of its properties in biointerfaces and offer CNTs as a promising platform for fundamental studies in targeted drug delivery, chemotherapy, tissue engineering, biosensing fields, etc. We hope that the present systematic review will shed light on the current knowledge about CNT toxicity, indicate "dark" spots and offer possible directions for the subsequent studies based on the demonstrated here tabulated and statistical data of doses, cell models, toxicity tests, viability, etc.

In vitro and integrated in vivo strategies to reduce animal use in genotoxicity testing

Scientific, financial, and ethical drivers have led to unprecedented interest in implementing human-relevant, mechanistic in vitro and in silico testing approaches. Further, as non-animal approaches are being developed and validated, researchers are interested in strategies that can immediately reduce the use of animals in toxicology testing. Here, we aim to outline a testing strategy for assessing genotoxicity beginning with standard in vitro methods, such as the bacterial reverse mutation test and the in vitro micronucleus test, followed by a second tier of in vitro assays including those using advanced 3D tissue models. Where regulatory agencies require in vivo testing, one demonstrated strategy is to combine genotoxicity studies traditionally conducted separately into a single test or to integrate genotoxicity studies into other toxicity studies. Standard setting organisations and regulatory agencies have encouraged such strategies, and examples of their use can be found in the scientific literature. Employing approaches outlined here will reduce animal use as well as study time and costs.

Four Immune-Related Genes (FN1, UGCG, CHPF2 and THBS2) as Potential Diagnostic and Prognostic Biomarkers for Carbon Nanotube-Induced Mesothelioma

Background

Malignant pleural mesothelioma (MPM), a highly aggressive cancer, was mainly attributed to asbestos exposure. Carbon nanotubes (CNTs) share similar negative features to asbestos, provoking concerns about their contribution to MPM. This study was used to identify genes associated with CNT-induced MPM.

Methods

Microarray datasets were available in the Gene Expression Omnibus database. The limma method was used to identify differentially expressed genes (DEGs) in CNT-exposed MeT5A cells (GSE48855) or mice (GSE51636). Weighted correlation network analysis (WGCNA) and protein–protein interaction (PPI) network construction were conducted to screen hub DEGs. The mRNA expression levels of hub DEGs were validated on MPM samples of GSE51024, GSE2549 and GSE42977 datasets, and their diagnostic efficacy was determined by receiver operating characteristic curve analysis. The prognostic values of hub DEGs were assessed using online tools based on The Cancer Genome Atlas data. Their functions were annotated by Database for Annotation, Visualization and Integrated Discovery (DAVID) enrichment and correlation with immune cells and markers.

Results

WGCNA identified that two modules were associated with disease status. Thirty-one common DEGs in the GSE48855 and GSE51636 datasets were overlapped with the genes in these two modules. Twenty of them had a high degree centrality (≥4) in the PPI network. Four DEGs (FN1, fibronectin 1; UGCG, UDP-glucose ceramide glucosyltransferase; CHPF2, chondroitin polymerizing factor 2; and THBS2, thrombospondin 2) could predict the overall survival, and they were confirmed to be upregulated in MPM samples compared with controls. Also, they could effectively predict the MPM risk, with an overall accuracy of >0.9. DAVID analysis revealed FN1, CHPF2 and THBS2 functioned in cell-ECM interactions; UGCG influenced glycosphingolipid metabolism. All genes were positively associated with infiltrating levels of immune cells (macrophages or dendritic cells) and the expression of the dendritic cell marker (NRP1, neuropilin 1).

Conclusion

These four immune-related genes represent potential biomarkers for monitoring CNT-induced MPM and predicting the prognosis.

Impact of Differentiated Macrophage-Like Cells on the Transcriptional Toxicity Profile of CuO Nanoparticles in Co-Cultured Lung Epithelial Cells

To mimic more realistic lung tissue conditions, co-cultures of epithelial and immune cells are one comparatively easy-to-use option. To reveal the impact of immune cells on the mode of action (MoA) of CuO nanoparticles (NP) on epithelial cells, A549 cells as a model for epithelial cells have been cultured with or without differentiated THP-1 cells, as a model for macrophages. After 24 h of submerged incubation, cytotoxicity and transcriptional toxicity profiles were obtained and compared between the cell culture systems. Dose-dependent cytotoxicity was apparent starting from 8.0 µg/cm² CuO NP. With regard to gene expression profiles, no differences between the cell models were observed concerning metal homeostasis, oxidative stress, and DNA damage, confirming the known MoA of CuO NP, i.e., endocytotic particle uptake, intracellular particle dissolution within lysosomes with subsequent metal ion deliberation, increased oxidative stress, and genotoxicity. However, applying a co-culture of epithelial and macrophage-like cells, CuO NP additionally provoked a pro-inflammatory response involving NLRP3 inflammasome and pro-inflammatory transcription factor activation. This study demonstrates that the application of this easy-to-use advanced in vitro model is able to extend the detection of cellular effects provoked by nanomaterials by an immunological response and emphasizes the use of such models to address a more comprehensive MoA.

Non-Animal Strategies for Toxicity Assessment of Nanoscale Materials: Role of Adverse Outcome Pathways in the Selection of Endpoints

Faster, cheaper, sensitive, and mechanisms-based animal alternatives are needed to address the safety assessment needs of the growing number of nanomaterials (NM) and their sophisticated property variants. Specifically, strategies that help identify and prioritize alternative schemes involving individual test models, toxicity endpoints, and assays for the assessment of adverse outcomes, as well as strategies that enable validation and refinement of these schemes for the regulatory acceptance are needed. In this review, two strategies 1) the current nanotoxicology literature review and 2) the adverse outcome pathways (AOPs) framework, a systematic process that allows the assembly of available mechanistic information concerning a toxicological response in a simple modular format, are presented. The review highlights 1) the most frequently assessed and reported ad hoc in vivo and in vitro toxicity measurements in the literature, 2) various AOPs of relevance to inhalation toxicity of NM that are presently under development, and 3) their applicability in identifying key events of toxicity for targeted in vitro assay development. Finally, using an existing AOP for lung fibrosis, the specific combinations of cell types, exposure and test systems, and assays that are experimentally supported and thus, can be used for assessing NM-induced lung fibrosis, are proposed.

An Alternative Perspective towards Reducing the Risk of Engineered Nanomaterials to Human Health

To elucidate the impact of human exposure to engineered nanomaterials, advanced in vitro models are a valid non-animal alternative. Despite significant gains over the last decade, implementation of these approaches remains limited. This work discusses the current state-of-the-art and how future developments can lead to advanced in vitro models better supporting nano-hazard assessment.

An In Vitro Lung System to Assess the Proinflammatory Hazard of Carbon Nanotube Aerosols

In vitro three-dimensional (3D) lung cell models have been thoroughly investigated in recent years and provide a reliable tool to assess the hazard associated with nanomaterials (NMs) released into the air. In this study, a 3D lung co-culture model was optimized to assess the hazard potential of multiwalled carbon nanotubes (MWCNTs), which is known to provoke inflammation and fibrosis, critical adverse outcomes linked to acute and prolonged NM exposure. The lung co-cultures were exposed to MWCNTs at the air-liquid interface (ALI) using the VITROCELL^® Cloud system while considering realistic occupational exposure doses. The co-culture model was composed of three human cell lines: alveolar epithelial cells (A549), fibroblasts (MRC-5), and macrophages (differentiated THP-1). The model was exposed to two types of MWCNTs (Mitsui-7 and Nanocyl) at different concentrations (2–10 μg/cm²) to assess the proinflammatory as well as the profibrotic responses after acute (24 h, one exposure) and prolonged (96 h, repeated exposures) exposure cycles. The results showed that acute or prolonged exposure to different concentrations of the tested MWCNTs did not induce cytotoxicity or apparent profibrotic response; however, suggested the onset of proinflammatory response.

Use of EpiAlveolar Lung Model to Predict Fibrotic Potential of Multiwalled Carbon Nanotubes

Expansion in production and commercial use of nanomaterials increases the potential human exposure during the lifecycle of these materials (production, use, and disposal). Inhalation is a primary route of exposure to nanomaterials; therefore it is critical to assess their potential respiratory hazard. Herein, we developed a three-dimensional alveolar model (EpiAlveolar) consisting of human primary alveolar epithelial cells, fibroblasts, and endothelial cells, with or without macrophages for predicting long-term responses to aerosols. Following thorough characterization of the model, proinflammatory and profibrotic responses based on the adverse outcome pathway concept for lung fibrosis were assessed upon repeated subchronic exposures (up to 21 days) to two types of multiwalled carbon nanotubes (MWCNTs) and silica quartz particles. We simulate occupational exposure doses for the MWCNTs (1-30 μg/cm²) using an air-liquid interface exposure device (VITROCELL Cloud) with repeated exposures over 3 weeks. Specific key events leading to lung fibrosis, such as barrier integrity and release of proinflammatory and profibrotic markers, show the responsiveness of the model. Nanocyl induced, in general, a less pronounced reaction than Mitsui-7, and the cultures with human monocyte-derived macrophages (MDMs) showed the proinflammatory response at later time points than those without MDMs. In conclusion, we present a robust alveolar model to predict inflammatory and fibrotic responses upon exposure to MWCNTs.

Single-walled carbon nanotubes repress viral-induced defense pathways through oxidative stress

Exposure of lung cells in vitro or mice to single-walled carbon nanotubes (SWCNTs) directly to the respiratory tract leads to a reduced host anti-viral immune response to infection with influenza A virus H1N1 (IAV), resulting in significant increases in viral titers. This suggests that unintended exposure to nanotubes via inhalation may increase susceptibility to notorious respiratory viruses that carry a high social and economic burden globally. However, the molecular mechanisms that contribute to viral susceptibility have not been elucidated. In the present study, we identified the retinoic acid-induced gene I (RIG-I) like receptors (RLRs)/mitochondrial antiviral signaling (MAVS) pathway as a target of SWCNT-induced oxidative stress in small airway epithelial cells (SAEC) that contribute to significantly enhanced influenza viral titers. Exposure of SAEC to SWCNTs increases viral titers while repressing several aspects of the RLR pathway, including mRNA expression of key genes (e.g. IFITs, RIG-I, MDA5, IFNβ1, CCL5). SWCNTs also reduce mitochondrial membrane potential without altering oxygen consumption rates. Our findings also indicate that SWCNTs can impair formation of MAVS prion-like aggregates, which is known to impede downstream activation of the RLR pathway and hence the transcriptional production of interferon-regulated anti-viral genes and cytokines. Furthermore, application of the antioxidant NAC alleviates inhibition of gene expression levels by SWCNTs, as well as MAVS signalosome formation, and increased viral titers. These data provide evidence of targeted impairment of anti-viral signaling networks that are vital to immune defense mechanisms in lung cells, contributing to increased susceptibility to IAV infections by SWCNTs.

A novel human 3D lung microtissue model for nanoparticle-induced cell-matrix alterations

BACKGROUND

Multi-walled carbon nanotubes (MWCNT) have been shown to elicit the release of inflammatory and pro-fibrotic mediators, as well as histopathological changes in lungs of exposed animals. Current standards for testing MWCNTs and other nanoparticles (NPs) rely on low-throughput in vivo studies to assess acute and chronic toxicity and potential hazard to humans. Several alternative testing approaches utilizing two-dimensional (2D) in vitro assays to screen engineered NPs have reported conflicting results between in vitro and in vivo assays. Compared to conventional 2D in vitro or in vivo animal model systems, three-dimensional (3D) in vitro platforms have been shown to more closely recapitulate human physiology, providing a relevant, more efficient strategy for evaluating acute toxicity and chronic outcomes in a tiered nanomaterial toxicity testing paradigm.

RESULTS

As inhalation is an important route of nanomaterial exposure, human lung fibroblasts and epithelial cells were co-cultured with macrophages to form scaffold-free 3D lung microtissues. Microtissues were exposed to multi-walled carbon nanotubes, M120 carbon black nanoparticles or crocidolite asbestos fibers for 4 or 7 days, then collected for characterization of microtissue viability, tissue morphology, and expression of genes and selected proteins associated with inflammation and extracellular matrix remodeling. Our data demonstrate the utility of 3D microtissues in predicting chronic pulmonary endpoints following exposure to MWCNTs or asbestos fibers. These test nanomaterials were incorporated into 3D human lung microtissues as visualized using light microscopy. Differential expression of genes involved in acute inflammation and extracellular matrix remodeling was detected using PCR arrays and confirmed using qRT-PCR analysis and Luminex assays of selected genes and proteins.

CONCLUSION

3D lung microtissues provide an alternative testing platform for assessing nanomaterial-induced cell-matrix alterations and delineation of toxicity pathways, moving towards a more predictive and physiologically relevant approach for in vitro NP toxicity testing.

In vitro detection of in vitro secondary mechanisms of genotoxicity induced by engineered nanomaterials

BACKGROUND

It is well established that toxicological evaluation of engineered nanomaterials (NMs) is vital to ensure the health and safety of those exposed to them. Further, there is a distinct need for the development of advanced physiologically relevant in vitro techniques for NM hazard prediction due to the limited predictive power of current in vitro models and the unsustainability of conducting nano-safety evaluations in vivo. Thus, the purpose of this study was to develop alternative in vitro approaches to assess the potential of NMs to induce genotoxicity by secondary mechanisms.

RESULTS

This was first undertaken by a conditioned media-based technique, whereby cell culture media was transferred from differentiated THP-1 (dTHP-1) macrophages treated with γ-Fe₂O₃ or Fe₃O₄ superparamagnetic iron oxide nanoparticles (SPIONs) to the bronchial cell line 16HBE14o^-. Secondly construction and SPION treatment of a co-culture model comprising of 16HBE14o^- cells and dTHP-1 macrophages. For both of these approaches no cytotoxicity was detected and chromosomal damage was evaluated by the in vitro micronucleus assay. Genotoxicity assessment was also performed using 16HBE14o^- monocultures, which demonstrated only γ-Fe₂O₃ nanoparticles to be capable of inducing chromosomal damage. In contrast, immune cell conditioned media and dual cell co-culture SPION treatments showed both SPION types to be genotoxic to 16HBE14o^- cells due to secondary genotoxicity promoted by SPION-immune cell interaction.

CONCLUSIONS

The findings of the present study demonstrate that the approach of using single in vitro cell test systems precludes the ability to consider secondary genotoxic mechanisms. Consequently, the use of multi-cell type models is preferable as they better mimic the in vivo environment and thus offer the potential to enhance understanding and detection of a wider breadth of potential damage induced by NMs.

The asbestos-carbon nanotube analogy: An update

Nanotechnology is an emerging industry based on commercialization of materials with one or more dimensions of 100 nm or less. Engineered nanomaterials are currently incorporated into thin films, porous materials, liquid suspensions, or filler/matrix nanocomposites with future applications predicted in energy and catalysis, microelectronics, environmental sensing and remediation, and nanomedicine. Carbon nanotubes are one-dimensional fibrous nanomaterials that physically resemble asbestos fibers. Toxicologic studies in rodents demonstrated that some types of carbon nanotubes can induce mesothelioma, and the World Health Organization evaluated long, rigid multiwall carbon nanotubes as possibly carcinogenic for humans in 2014. This review summarizes key physicochemical similarities and differences between asbestos fibers and carbon nanotubes. The "fiber pathogenicity paradigm" has been extended to include carbon nanotubes as well as other high-aspect-ratio fibrous nanomaterials including metallic nanowires. This paradigm identifies width, length, and biopersistence of high-aspect-ratio fibrous nanomaterials as critical determinants of lung disease, including mesothelioma, following inhalation. Based on recent theoretical modeling studies, a fourth factor, mechanical bending stiffness, will be considered as predictive of potential carcinogenicity. Novel three-dimensional lung tissue platforms provide an opportunity for in vitro screening of a wide range of high aspect ratio fibrous nanomaterials for potential lung toxicity prior to commercialization.

Isolating and culturing of sputum macrophages: A potential ex vivo/in vitro model

PURPOSE

This paper aimed to test whether induced sputum samples acquired from human volunteers could be used to isolate and culture airway macrophages for in vitro exposures. This was assessed in terms of the culturing success rate, culture purity, viability and responsiveness of cultured cells.

MATERIALS AND METHODS

The isolation and culturing procedure was performed over three days. On Day 1, induced sputum samples were obtained, processed and seeded in culture wells. Differential cell counts and viability tests were performed to allow for calculation of viable macrophage numbers and appropriate sample dilution. After a 1 h rest, seeded wells were washed to remove non-adherent cells, resulting in macrophage isolation. Then, cells rested overnight (Day 1-Day 2), before in vitro exposure for 2-24 h (Day 2-Day 3). The criteria for progressing into the culturing procedure was cell viability >40% and total cell number >10⁶. Successful culturing was evaluated based on cell attachment (N = 40). Culture purity by differential cell analysis and viability was monitored during culturing (N = 4-8). Macrophage responsivity was assessed by measurement of inflammatory cytokine gene expression (N = 4) and cytokine levels (N = 6) following in vitro exposure to lipopolysaccharide (LPS) (2-24 h) and live bacteria (S. aureus) (4h).

RESULTS

Overall, 88% (35/40) of the samples acquired were suitable for isolation, and 80% (32/40) were successfully progressed through the 2-3 day culturing protocol. Macrophage purity (88%) and viability (85%) were adequate. Moreover, cultured macrophages were responsive to in vitro stimulation with LPS and viable S. aureus showing positive mRNA responses for TNFα, IL-1β and IL-8 and release of IL-1β, respectively.

CONCLUSION

Sputum macrophage isolation by plate adherence and subsequent culturing of sputum macrophages was successfully performed and represents a promising in vitro model for examination of airway macrophage behavior.

The crux of positive controls - Pro-inflammatory responses in lung cell models

Positive controls are an important feature in experimental studies as they show the responsiveness of the model under investigation. An often applied reagent for a pro-inflammatory stimulus is the endotoxin lipopolysaccharide (LPS), which has been shown to induce a cytokine release by various cell cultures. The effect of LPS in monocultures of 16HBE14o-, a bronchial cell line, and of A549, an alveolar cell line, were compared in submerged and air-liquid interface cultures, as well as in co-cultures of the two epithelial cells with monocyte-derived macrophages and dendritic cells. The protein and mRNA levels of the two most relevant pro-inflammatory mediators, Tumor necrosis factor alpha (TNF) and Interleukin 8 (CXCL8), were measured after 4 h and 24 h exposure. 16HBE14o- cells alone as well as in co-cultures are non-responsive to an LPS stimulus, but an already increased basal expression of both pro-inflammatory mediators after prolonged time in culture was observed. In contrary, A549 in monocultures showed increased CXCL8 production at the gene and protein level after LPS exposure, while TNF-levels were below detection limit. In A549 co-cultured with immune cells both mediators were upregulated. This study shows the importance of a careful evaluation of the culture system used, including the application of positive controls. In addition, the use of co-cultures with immune cells more adequately reflects the inflammatory response upon exposure to toxicants.

Cytotoxicity, cytokine release and ER stress-autophagy gene expression in endothelial cells and alveolar-endothelial co-culture exposed to pristine and carboxylated multi-walled carbon nanotubes

Recently we found that direct exposure of human umbilical vein endothelial cells (HUVECs) to multi-walled carbon nanotubes (MWCNTs) might induce toxicological responses through the modulation of ER stress gene expression, but whether this signal could be transferred from other cells to endothelial cells (ECs) is unknown. This study investigated the toxicity of pristine and carboxylated MWCNTs to HUVECs and alveolar-endothelial co-culture, the later of which could mimic the possible signaling communications between ECs and MWCNT exposed alveolar cells. The results showed that direct contact with high levels of MWCNTs induced cytotoxicity and modulated expression of genes associated with ER stress (HSPA5, DDIT3 and XBP-1s) and autophagy (BECN1 and ATG12) both in A549-THP-1 macrophages cultured in the upper chambers as well as HUVECs. However, most of these responses were minimal or negligible in HUVECs cultured in the lower chambers. Moreover, significantly increased cytokine release (interleukin-6 and soluble vascular cell adhesion molecule-1) was only observed in MWCNT exposed HUVECs (p < 0.01) but not HUVECs cultured in the lower chambers (p > 0.05). The minimal or even absent response was likely due to relatively low translocation of MWCNTs from upper chambers to lower chambers, whereas A549-macrophages cultured in the upper chambers internalized large amount MWCNTs. The results indicated that ER stress-autophagy signaling might not be able to transfer from alveolar cells to endothelial cells unless sufficient MWCNTs are translocated.

Acute effects of multi-walled carbon nanotubes on primary bronchial epithelial cells from COPD patients

The risks of occupational exposure during handling of multi-walled carbon nanotubes (MWCNTs) have received limited attention to date, in particular for potentially susceptible individuals with highly prevalent chronic obstructive pulmonary disease (COPD). In this in vitro study, we simulated acute inhalation of MWCNTs employing an air-liquid interface cell exposure (ALICE) system: primary human bronchial epithelial cells from COPD patients and healthy donors (controls), cultured at the air-liquid interface (ALI) were exposed to MWCNTs. To study acute health effects on the respiratory epithelium, two different concentrations (0.16; 0.34 µg/cm²) of MWCNTs were aerosolized onto cell cultures followed by analysis after 24 h. Following MWCNT exposure, epithelial integrity and differentiation remained intact. Electron microscopy analyses identified MWCNTs both extra- and intracellular within vesicles of mucus producing cells. In both COPD and healthy control cultures, MWCNTs neither caused increased release of lactate dehydrogenase (LDH), nor alterations in inflammatory responses, as measured by RNA expression and protein secretion of the cytokines IL-6, IL-8, CXCL10, IL-1β and TGF-β and oxidative stress markers HMOX-1 and SOD-2. No short-term alteration of epithelial cell function, as determined by ciliary beating frequency (CBF), occurred in any of the conditions tested. In conclusion, the present study provided a reliable and realistic in vitro acute-exposure model of the respiratory tract, responsive to positive controls such as Dörentruper Quartz (DQ12) and asbestos. Acute exposure to MWCNTs did not affect epithelial integrity, nor induce increased cell death, apoptosis or inflammatory changes.

Toxicological assessment of multi-walled carbon nanotubes in vitro: potential mitochondria effects on male reproductive cells

Multi-walled carbon nanotubes (MWCNTs) have been widely used in many fields and were reported to cause reversible testis damage in mice at high-dose. However the reproductive effects of low dose MWCNTs remained elusive. Herein, we used the mice spermatocyte cell line (GC-2spd) to assess the reproductive effects of MWCNTs. Size distribution, zeta potential, and intensity of MWCNTs were characterized. A maximal concentration of 0.5 μg/mL MWCNTs was found to be nonlethal to GC-2spd. At this dose, cell cycles and the ROS levels were in normal status. We also found MWCNTs accumulated in mitochondria, which caused potential mitochondrial DNA damage in spermatocyte. Furthermore, the expression level of mitochondria-related genes, the oxygen consumption rate, and cellular ATP content were declined compared to controls, even at the nonlethal dose. Our results suggested for the first time that, in germ cells, mitochondrion was a cellular organelle that accumulated MWCNTs.

Human Asthmatic Bronchial Cells Are More Susceptible to Subchronic Repeated Exposures of Aerosolized Carbon Nanotubes At Occupationally Relevant Doses Than Healthy Cells

Although acute pulmonary toxicity of carbon nanotubes (CNTs) has been extensively investigated, the knowledge of potential health effects following chronic occupational exposure is currently limited and based only upon in vivo approaches. Our aim was to realistically mimic subchronic inhalation of multiwalled CNTs (MWCNTs) in vitro, using the air-liquid interface cell exposure (ALICE) system for aerosol exposures on reconstituted human bronchial tissue from healthy and asthmatic donors. The reliability and sensitivity of the system were validated using crystalline quartz (DQ12), which elicited an increased (pro-)inflammatory response, as reported in vivo. At the administrated MWCNT doses relevant to human occupational lifetime exposure (10 μg/cm² for 5 weeks of repeated exposures/5 days per week) elevated cilia beating frequency (in both epithelial cultures), and mucociliary clearance (in asthmatic cells only) occurred, whereas no cytotoxic reactions or morphological changes were observed. However, chronic MWCNT exposure did induce an evident (pro-)inflammatory and oxidative stress response in both healthy and asthmatic cells. The latter revealed stronger and more durable long-term effects compared to healthy cells, indicating that individuals with asthma may be more susceptible to adverse effects from chronic MWCNT exposure. Our results highlight the power of occupationally relevant subchronic exposures on human in vitro models in nanosafety hazard assessment.

A novel technique to determine the cell type specific response within an in vitro co-culture model via multi-colour flow cytometry

Determination of the cell type specific response is essential towards understanding the cellular mechanisms associated with disease states as well as assessing cell-based targeting of effective therapeutic agents. Recently, there have been increased calls for advanced in vitro multi-cellular models that provide reliable and valuable tools correlative to in vivo. In this pursuit the ability to assess the cell type specific response is imperative. Herein, we report a novel approach towards resolving each specific cell type of a multi-cellular model representing the human lung epithelial tissue barrier via multi-colour flow cytometry (FACS). We proved via ≤ five-colour FACS that the manipulation of this in vitro model allowed each cell type to be resolved with no impact upon cell viability. Subsequently, four-colour FACS verified the ability to determine the biochemical effect (e.g. oxidative stress) of each specific cell type. This technique will be vital in gaining information upon cellular mechanics when using next-level, multi-cellular in vitro strategies.

Cell and tissue-based in vitro models for improving the development of oral inhalation drug products

The interplay of costs and ethics has increased the need for adequate models mimicking the human in vivo situation drastically. An adequate model has the ability to generate data which are predictive for a certain aspect of the human response, for example for the bioavailability. This review highlights how in vitro models can enrich pulmonary drug delivery research with more detailed insights in cellular and non-cellular barriers, allowing for faster improvements and significant innovations of inhalation drug products. Risk assessment in inhalation toxicology and aerosol medicines and related important guidelines (e.g. OECD, EMA) are mentioned as a fundament for the described methods. Principle decisions to find a suitable in vitro tool for the question being asked are discussed to support the individual selection. Depending on the cellular and non-cellular barrier, exemplary in vitro tools are described with their ability to reflect a certain part of the in vivo lung situation. The review closes with a short summary of more complex systems as well as their advantages and limitations.

Critical review of the current and future challenges associated with advanced in vitro systems towards the study of nanoparticle (secondary) genotoxicity

With the need to understand the potential biological impact of the plethora of nanoparticles (NPs) being manufactured for a wide range of potential human applications, due to their inevitable human exposure, research activities in the field of NP toxicology has grown exponentially over the last decade. Whilst such increased research efforts have elucidated an increasingly significant knowledge base pertaining to the potential human health hazard posed by NPs, understanding regarding the possibility for NPs to elicit genotoxicity is limited. In vivo models are unable to adequately discriminate between the specific modes of action associated with the onset of genotoxicity. Additionally, in line with the recent European directives, there is an inherent need to move away from invasive animal testing strategies. Thus, in vitro systems are an important tool for expanding our mechanistic insight into NP genotoxicity. Yet uncertainty remains concerning their validity and specificity for this purpose due to the unique challenges presented when correlating NP behaviour in vitro and in vivo This review therefore highlights the current state of the art in advanced in vitro systems and their specific advantages and disadvantages from a NP genotoxicity testing perspective. Key indicators will be given related to how these systems might be used or improved to enhance understanding of NP genotoxicity.

Combined exposure of diesel exhaust particles and respirable Soufrière Hills volcanic ash causes a (pro-)inflammatory response in an in vitro multicellular epithelial tissue barrier model

Background

There are justifiable health concerns regarding the potential adverse effects associated with human exposure to volcanic ash (VA) particles, especially when considering communities living in urban areas already exposed to heightened air pollution. The aim of this study was, therefore, to gain an imperative, first understanding of the biological impacts of respirable VA when exposed concomitantly with diesel particles.

Methods

A sophisticated in vitro 3D triple cell co-culture model of the human alveolar epithelial tissue barrier was exposed to either a single or repeated dose of dry respirable VA (deposited dose of 0.26 ± 0.09 or 0.89 ± 0.29 μg/cm², respectively) from Soufrière Hills volcano, Montserrat for a period of 24 h at the air-liquid interface (ALI). Subsequently, co-cultures were exposed to co-exposures of single or repeated VA and diesel exhaust particles (DEP; NIST SRM 2975; 0.02 mg/mL), a model urban pollutant, at the pseudo-ALI. The biological impact of each individual particle type was also analysed under these precise scenarios. The cytotoxic (LDH release), oxidative stress (depletion of intracellular GSH) and (pro-)inflammatory (TNF-α, IL-8 and IL-1β) responses were assessed after the particulate exposures. The impact of VA exposure upon cell morphology, as well as its interaction with the multicellular model, was visualised via confocal laser scanning microscopy (LSM) and scanning electron microscopy (SEM), respectively.

Results

The combination of respirable VA and DEP, in all scenarios, incited an heightened release of TNF-α and IL-8 as well as significant increases in IL-1β, when applied at sub-lethal doses to the co-culture compared to VA exposure alone. Notably, the augmented (pro-)inflammatory responses observed were not mediated by oxidative stress. LSM supported the quantitative assessment of cytotoxicity, with no changes in cell morphology within the barrier model evident. A direct interaction of the VA with all three cell types of the multicellular system was observed by SEM.

Conclusions

Combined exposure of respirable Soufrière Hills VA with DEP causes a (pro-)inflammatory effect in an advanced in vitro multicellular model of the epithelial airway barrier. This finding suggests that the combined exposure to volcanic and urban particulate matter should be further investigated in order to deduce the potential human health hazard, especially how it may influence the respiratory function of susceptible individuals (i.e. with pre-existing lung diseases) in the population.

Electronic supplementary material

The online version of this article (doi:10.1186/s12989-016-0178-9) contains supplementary material, which is available to authorized users.

A 3D co-culture microtissue model of the human placenta for nanotoxicity assessment

There is increasing evidence that certain nanoparticles (NPs) can overcome the placental barrier, raising concerns on potential adverse effects on the growing fetus. But even in the absence of placental transfer, NPs may pose a risk to proper fetal development if they interfere with the viability and functionality of the placental tissue. The effects of NPs on the human placenta are not well studied or understood, and predictive in vitro placenta models to achieve mechanistic insights on NP-placenta interactions are essentially lacking. Using the scaffold-free hanging drop technology, we developed a well-organized and highly reproducible 3D co-culture microtissue (MT) model consisting of a core of placental fibroblasts surrounded by a trophoblast cell layer, which resembles the structure of the in vivo placental tissue. We could show that secretion levels of human chorionic gonadotropin (hCG) were significantly higher in 3D than in 2D cell cultures, which indicates an enhanced differentiation of trophoblasts grown on 3D MTs. NP toxicity assessment revealed that cadmium telluride (CdTe) and copper oxide (CuO) NPs but not titanium dioxide (TiO₂) NPs decreased MT viability and reduced the release of hCG. NP acute toxicity was significantly reduced in 3D co-culture MTs compared to 2D monocultures. Taken together, 3D placental MTs provide a new and promising model for the fast generation of tissue-relevant acute NP toxicity data, which are indispensable for the safe development of NPs for industrial, commercial and medical applications.

Predicting pulmonary fibrosis in humans after exposure to multi-walled carbon nanotubes (MWCNTs)

The increased production and use of multi-walled carbon nanotubes (MWCNTs) in a diverse array of consumer, medical, and industrial applications have raised concerns about potential human exposure to these materials in the workplace and ambient environments. Inhalation is a primary route of exposure to MWCNTs, and the existing data indicate that they are potentially hazardous to human health. While a 90-day rodent inhalation test (e.g., OECD Test No. 413: subchronic inhalation toxicity: 90-day study or EPA Health Effects Test Guidelines OPPTS 870.3465 90-day inhalation toxicity) is recommended by the U.S. Environmental Protection Agency Office of Pollution Prevention and Toxics for MWCNTs (and other CNTs) if they are to be commercially produced (Godwin et al. in ACS Nano 9:3409-3417, 2015), this test is time and cost-intensive and subject to scientific and ethical concerns. As a result, there has been much interest in transitioning away from studies on animals and moving toward human-based in vitro and in silico models. However, given the multiple mechanisms of toxicity associated with subchronic exposure to inhaled MWCNTs, a battery of non-animal tests will likely be needed to evaluate the key endpoints assessed by the 90-day rodent study. Pulmonary fibrosis is an important adverse outcome related to inhalation exposure to MWCNTs and one that the non-animal approach should be able to assess. This review summarizes the state-of-the-science regarding in vivo and in vitro toxicological methods for predicting MWCNT-induced pulmonary fibrosis.

A Review of Molecular Mechanisms Involved in Toxicity of Nanoparticles

In recent decades, the use of nanomaterials has received much attention in industrial and medical fields. However, some reports have mentioned adverse effects of these materials on the biological systems and cellular components. There are several major mechanisms for cytotoxicity of nanoparticles (NPs) such as physicochemical properties, contamination with toxic element, fibrous structure, high surface charge and radical species generation. In this review, a brief key mechanisms involved in toxic effect of NPs are given, followed by the in vitro toxicity assays of NPs and prooxidant effects of several NPs such as carbon nanotubes, titanium dioxide NPs, quantum dots, gold NPs and silver NPs.

Monocyte adhesion induced by multi-walled carbon nanotubes and palmitic acid in endothelial cells and alveolar-endothelial co-cultures

Free palmitic acid (PA) is a potential pro-atherogenic stimulus that may aggravate particle-mediated cardiovascular health effects. We hypothesized that the presence of PA can aggravate oxidative stress and endothelial activation induced by multi-walled carbon nanotube (MWCNT) exposure in vitro. We investigated the interaction between direct exposure to MWCNTs and PA on THP-1 monocyte adhesion to human umbilical vein endothelial cells (HUVECs), as well as on indirect exposure in an alveolar-endothelial co-culture model with A549 cells and THP-1-derived macrophages exposed in inserts and the effect measured in the lower chamber on HUVECs and THP-1 cells. The exposure to MWCNTs, including a short (NM400) and long (NM402) type of entangled fibers, was associated with elevated levels of reactive oxygen species as well as a decrease in the intracellular glutathione concentration in HUVEC and A549 monocultures. Both effects were found to be independent of the presence of PA. MWCNT exposure significantly increased THP-1 monocyte adhesion to HUVECs, and co-exposure to PA aggravated the NM400-mediated adhesion but decreased the NM402-mediated adhesion. For the co-cultures, the exposure of A549 cells did not promote THP-1 adhesion to HUVECs in the lower chamber. When THP-1 macrophages were present on the cell culture inserts, there was a modest increase in the adhesion and an increase in interleukin-6 and interleukin-8 levels in the lower chamber whereas no tumor necrosis factor was detected. Overall, this study showed that direct exposure of HUVECs to MWCNTs was associated with oxidative stress and monocyte adhesion and the presence of PA increased the adhesion when exposed to NM400.

Multi-walled carbon nanotube-induced gene expression in vitro: concordance with in vivo studies

There is a current interest in reducing the in vivo toxicity testing of nanomaterials in animals by increasing toxicity testing using in vitro cellular assays; however, toxicological results are seldom concordant between in vivo and in vitro models. This study compared global multi-walled carbon nanotube (MWCNT)-induced gene expression from human lung epithelial and microvascular endothelial cells in monoculture and coculture with gene expression from mouse lungs exposed to MWCNT. Using a cutoff of 10% false discovery rate and 1.5 fold change, we determined that there were more concordant genes (gene expression both up- or downregulated in vivo and in vitro) expressed in both cell types in coculture than in monoculture. When reduced to only those genes involved in inflammation and fibrosis, known outcomes of in vivo MWCNT exposure, there were more disease-related concordant genes expressed in coculture than monoculture. Additionally, different cellular signaling pathways are activated in response to MWCNT dependent upon culturing conditions. As coculture gene expression better correlated with in vivo gene expression, we suggest that cellular cocultures may offer enhanced in vitro models for nanoparticle risk assessment and the reduction of in vivo toxicological testing.

Test-methods on the test-bench: a comparison of complete exhaust and exhaust particle extracts for genotoxicity/mutagenicity assessment

With the growing number of new exhaust after-treatment systems, fuels and fuel additives for internal combustion engines, efficient and reliable methods for detecting exhaust genotoxicity and mutagenicity are needed to avoid the widespread application of technologies with undesirable effects toward public health. In a commonly used approach, organic extracts of particulates rather than complete exhaust is used for genotoxicity/mutagenicity assessment, which may reduce the reliability of the results. In the present study, we assessed the mutagenicity and the genotoxicity of complete diesel exhaust compared to an organic exhaust particle extract from the same diesel exhaust in a bacterial and a eukaryotic system, that is, a complex human lung cell model. Both, complete exhaust and organic extract were found to act mutagenic/genotoxic, but the amplitudes of the effects differed considerably. Furthermore, our data indicate that the nature of the mutagenicity may not be identical for complete exhaust and particle extracts. Because in addition, differences between the responses of the different biological systems were found, we suggest that a comprehensive assessment of exhaust toxicity is preferably performed with complete exhaust and with biological systems representative for the organisms and organs of interest (i.e., human lungs) and not only with the Ames test.