Effects on phacoemulsification efficiency and chatter at variable longitudinal ultrasound settings when combined with constant torsional energy

Efficiency of a polymer-coated phacoemulsification tip in cataract surgery

PURPOSE

To determine whether there is a difference in efficiency during phacoemulsification when using the hybrid polymer tip compared with the metal balanced tip, as measured by cumulative dissipated energy (CDE) and total procedure time.

SETTING

John A. Moran Eye Center, University of Utah, Salt Lake City, Utah.

DESIGN

Experimental study.

METHODS

Phacoemulsification was performed with the Centurion Vision System and Infiniti OZil handpiece, with a 30-degree bevel metal balanced tip and hybrid polymer tip. The vacuum was set at 500 mm Hg and the aspiration flow rate at 50 mL/min. Power was changed for torsional and longitudinal ultrasound (US) at 20%, 40%, 60%, 80%, and 100%. Hardened porcine lenses were cut into 200 two mm cubes, 10 for each specified tip/power setting. They were placed into an artificial anterior chamber filled with a balanced salt solution, and phacoemulsification was performed. A second observer randomly assigned the US type and power. The same observer timed trials with a stopwatch, and CDE was recorded.

RESULTS

There were no significant differences in time or CDE for any power levels or US modes when comparing the 2 tips.

CONCLUSIONS

No significant difference in efficiency was observed when comparing the metal balanced tip with the hybrid polymer tip. Given the known improved safety profile and the overall equivalent efficiency of the hybrid tip, it could improve the performance of beginning and advanced surgeons in the future. Future study is needed to evaluate other setting combinations and to evaluate the hybrid tip in clinical settings.

Application of the Active-Fluidics System in Phacoemulsification: A Review

The fluidics system is an indispensable and primary component of phacoemulsification. Both the gravity-fluidics system and active-fluidics system are commonly used in practice. The irrigation pressure of the gravity-fluidics system is determined by the bottle height, which is relatively constant, while the active-fluidics system is paired with a cassette that contains pressure sensors to monitor intraocular pressure changes. The active-fluidics system allows surgeons to preset a target intraocular pressure value, and it replenishes the fluids proactively; thus, the intraocular pressure is consistently maintained near the target value. Under such circumstances, stable intraocular pressure and anterior chamber volume values could be acquired. Research on surgical safety, efficiency and results have reported several strengths of the active-fluidics system. It is also advantageous in some complicated cataract surgeries. However, the system is not widely used at present, mainly due to its low penetration rate and high equipment cost. Some of its updates such as the new Active Sentry handpiece showed potential superiority in laboratory studies recently, but there is still further research to be conducted. This article gives an overview of the mechanism and performance of the active-fluidics system, and it is expected to provide clues for future research.

Optimization of Phacoemulsification Tip Gauge on the Oertli CataRhex3 in an in vitro Setting

Purpose

To evaluate the effect of each of the tip sizes available for the Oertli CataRhex3^® phacoemulsification machine on efficiency.

Methods

Porcine lenses were fixed in formalin for 2 hours, then cut into 3.0 mm cubes. We studied three Oertli tips, all of which had a 30-degree bevel: easyTip 2.2 mm (20G), easyTip 2.8 mm (19G), and CO-MICS (21G). For the 19G and 20G tips, vacuum was set at 600 mmHg, irrigation rate at 50 mL/min, continuous power 70%, and bottle height 85 cm. For the 21G tip, vacuum was set at 450 mmHg; irrigation and power settings were identical to those used for the easyTip tips. We measured time to removal and chatter events to determine efficiency.

Results

Results from 20 trials for each tip showed that the larger the gauge size, the more quickly lens fragments were removed. Chatter events demonstrated an increasing trend with smaller tip gauge. The 19G tip used an average time to fragment removal of 2.8 seconds; the 20G, 3.2 seconds; and the 21G, 4.6 seconds. Increasing tip diameter from 21G to 20G decreased emulsification time by 33% (P = 0.02). Increasing the diameter from 21G to 19G further decreased time to emulsification by 42% (P = 0.003). The 21G tip had a mean 1.4 events/cube; 20G, 0.35 events; and 19G, 0.1 events. Differences in mean chatter events for each tip were each statistically significant.

Conclusion

These data suggest that when evaluated by chatter events and emulsification time, the 2.8 mm (19G) easyTip proves to have greatest efficiency.

Efficient use of ultrasound in cataract surgery

PURPOSE OF REVIEW

Modern phacoemulsification machines apply ultrasound through a variety of settings and parameters to remove a cataract. Using these new technologies efficiently is critical for both reducing surgical times and improving postoperative outcomes. The present article reviews recent findings in phacodynamics to explore the optimum use of ultrasound in cataract surgery.

RECENT FINDINGS

In studies seeking to determine the optimum parameters in both fluidics and power, increased power and aspiration does not necessarily equate to more efficiency. New developments, such as torsional ultrasound, micropulse, and burst mode have shown increased efficiency in randomized control trials and in-vitro compared with conventional ultrasound. Regarding vacuums, the venturi pump has demonstrated greater efficiency compared with the peristaltic pump. We also explore other parameters, such as chamber pressure and tip selection. Meta-analyses on femtosecond-laser assisted cataract surgery (FLACS) have shown similar long-term visual outcomes compared to conventional cataract surgery.

SUMMARY

Though conventional cataract surgery remains highly effective, surgeons have increasing options for customizing their ultrasound settings and phacoemulsification techniques.

Optimizing Tip Diameter in Phacoemulsification of Varying Lens Sizes: An in vitro Study

Purpose

We assessed the effect of two lens cube sizes, three tip sizes, and two ultrasound (US) approaches on phacoemulsification efficiency and chatter.

Methods

After porcine lens nuclei were soaked in formalin, we divided them into cubes measuring 2.0 mm or 3.0 mm. We collected efficiency and chatter data for 30-degree bent 19 G, 20 G, and 21 G tips with a continuous torsional US system; and for straight 19 G, 20 G, and 21 G tips with a micropulse longitudinal US system.

Results

The average time needed for removal was always higher for the 3.0 mm lens cube than for the 2.0 mm lens cube. Statistically significant differences were observed between the 19 G and 21 G tips with micropulse longitudinal US using a 2.0 mm cube and a 3.0 mm cube, and with continuous transversal US using a 2.0 mm lens cube and a 3.0 mm cube. We did not observe significant differences between 19 G and 20 G tips with either cube size in either US system. However, we noted identical trends for both cube sizes with both US approaches; 19 G tips performed better than 20 G and 21 G tips.

Conclusion

Regardless of the lens size, 19 G needles were the most efficient, and had both the fewest outliers and the smallest standard deviations.