1
|
Skowronski N, Malek Pour M, Singh S, Longo SJ, St Pierre R. Design and control of jumping microrobots with torque reversal latches. BIOINSPIRATION & BIOMIMETICS 2024; 19:046007. [PMID: 38697139 DOI: 10.1088/1748-3190/ad46b9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/01/2024] [Accepted: 05/01/2024] [Indexed: 05/04/2024]
Abstract
Jumping microrobots and insects power their impressive leaps through systems of springs and latches. Using springs and latches, rather than motors or muscles, as actuators to power jumps imposes new challenges on controlling the performance of the jump. In this paper, we show how tuning the motor and spring relative to one another in a torque reversal latch can lead to an ability to control jump output, producing either tuneable (variable) or stereotyped jumps. We develop and utilize a simple mathematical model to explore the underlying design, dynamics, and control of a torque reversal mechanism, provides the opportunity to achieve different outcomes through the interaction between geometry, spring properties, and motor voltage. We relate system design and control parameters to performance to guide the design of torque reversal mechanisms for either variable or stereotyped jump performance. We then build a small (356 mg) microrobot and characterize the constituent components (e.g. motor and spring). Through tuning the actuator and spring relative to the geometry of the torque reversal mechanism, we demonstrate that we can achieve jumping microrobots that both jump with different take-off velocities given the actuator input (variable jumping), and those that jump with nearly the same take-off velocity with actuator input (stereotyped jumping). The coupling between spring characteristics and geometry in this system has benefits for resource-limited microrobots, and our work highlights design combinations that have synergistic impacts on output, compared to others that constrain it. This work will guide new design principles for enabling control in resource-limited jumping microrobots.
Collapse
Affiliation(s)
- Nolan Skowronski
- Department of Mechanical and Aerospace Engineering, University at Buffalo, Buffalo, NY 14260, United States of America
| | - Mohammadamin Malek Pour
- Department of Mechanical and Aerospace Engineering, University at Buffalo, Buffalo, NY 14260, United States of America
| | - Shashwat Singh
- Department of Mechanical and Aerospace Engineering, University at Buffalo, Buffalo, NY 14260, United States of America
| | - Sarah J Longo
- Department of Biological Sciences, Towson University, Towson, MD 21252, United States of America
| | - Ryan St Pierre
- Department of Mechanical and Aerospace Engineering, University at Buffalo, Buffalo, NY 14260, United States of America
- Department of Computer Science and Engineering, University at Buffalo, Buffalo, NY 14260, United States of America
| |
Collapse
|
2
|
Avidan C, Day SW, Holzman R. A power amplification dyad in seahorses. Proc Biol Sci 2023; 290:20230520. [PMID: 37040808 PMCID: PMC10089724 DOI: 10.1098/rspb.2023.0520] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/13/2023] Open
Abstract
Throughout evolution, organisms repeatedly developed elastic elements to power explosive body motions, overcoming ubiquitous limits on the power capacity of fast-contracting muscles. Seahorses evolved such a latch-mediated spring-actuated (LaMSA) mechanism; however, it is unclear how this mechanism powers the two complementary functions necessary for feeding: rapidly swinging the head towards the prey, and sucking water into the mouth to entrain it. Here, we combine flow visualization and hydrodynamic modelling to estimate the net power required for accelerating the suction feeding flows in 13 fish species. We show that the mass-specific power of suction feeding in seahorses is approximately three times higher than the maximum recorded from any vertebrate muscle, resulting in suction flows that are approximately eight times faster than similar-sized fishes. Using material testing, we reveal that the rapid contraction of the sternohyoideus tendons can release approximately 72% of the power needed to accelerate the water into the mouth. We conclude that the LaMSA system in seahorses is powered by two elastic elements, the sternohyoideus and epaxial tendons. These elements jointly actuate the coordinated acceleration of the head and the fluid in front of the mouth. These findings extend the known function, capacity and design of LaMSA systems.
Collapse
Affiliation(s)
- Corrine Avidan
- Department of Ecology, Evolution and Organismal Biology, Brown University, Providence, RI 02912, USA
- School of Zoology, Faculty of Life Sciences, Tel Aviv University, Tel Aviv 69978, Israel
- The Inter-University Institute for Marine Sciences, POB 469, Eilat 88103, Israel
| | - Steven W Day
- Rochester Institute of Technology, Rochester, NY 14623, USA
| | - Roi Holzman
- School of Zoology, Faculty of Life Sciences, Tel Aviv University, Tel Aviv 69978, Israel
- The Inter-University Institute for Marine Sciences, POB 469, Eilat 88103, Israel
| |
Collapse
|
3
|
Longo SJ, St Pierre R, Bergbreiter S, Cox S, Schelling B, Patek SN. Geometric latches enable tuning of ultrafast, spring-propelled movements. J Exp Biol 2023; 226:286280. [PMID: 36606724 DOI: 10.1242/jeb.244363] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/01/2022] [Accepted: 12/22/2022] [Indexed: 01/07/2023]
Abstract
The smallest, fastest, repeated-use movements are propelled by power-dense elastic mechanisms, yet the key to their energetic control may be found in the latch-like mechanisms that mediate transformation from elastic potential energy to kinetic energy. Here, we tested how geometric latches enable consistent or variable outputs in ultrafast, spring-propelled systems. We constructed a reduced-order mathematical model of a spring-propelled system that uses a torque reversal (over-center) geometric latch. The model was parameterized to match the scales and mechanisms of ultrafast systems, specifically snapping shrimp. We simulated geometric and energetic configurations that enabled or reduced variation of strike durations and dactyl rotations given variation of stored elastic energy and latch mediation. Then, we collected an experimental dataset of the energy storage mechanism and ultrafast snaps of live snapping shrimp (Alpheus heterochaelis) and compared our simulations with their configuration. We discovered that snapping shrimp deform the propodus exoskeleton prior to the strike, which may contribute to elastic energy storage. Regardless of the amount of variation in spring loading duration, strike durations were far less variable than spring loading durations. When we simulated this species' morphological configuration in our mathematical model, we found that the low variability of strike duration is consistent with their torque reversal geometry. Even so, our simulations indicate that torque reversal systems can achieve either variable or invariant outputs through small adjustments to geometry. Our combined experiments and mathematical simulations reveal the capacity of geometric latches to enable, reduce or enhance variation of ultrafast movements in biological and synthetic systems.
Collapse
Affiliation(s)
- Sarah J Longo
- Department of Biology, Duke University, Durham, NC 27708, USA
| | - Ryan St Pierre
- Department of Mechanical and Aerospace Engineering, University at Buffalo, Buffalo, NY 14260, USA
| | - Sarah Bergbreiter
- Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, PA 15213, USA
| | - Suzanne Cox
- Department of Biology, Duke University, Durham, NC 27708, USA
| | | | - S N Patek
- Department of Biology, Duke University, Durham, NC 27708, USA
| |
Collapse
|
4
|
Hyun NP, Olberding JP, De A, Divi S, Liang X, Thomas E, St Pierre R, Steinhardt E, Jorge J, Longo SJ, Cox S, Mendoza E, Sutton GP, Azizi E, Crosby AJ, Bergbreiter S, Wood RJ, Patek SN. Spring and latch dynamics can act as control pathways in ultrafast systems. BIOINSPIRATION & BIOMIMETICS 2023; 18:026002. [PMID: 36595244 DOI: 10.1088/1748-3190/acaa7c] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/25/2022] [Accepted: 12/09/2022] [Indexed: 06/17/2023]
Abstract
Ultrafast movements propelled by springs and released by latches are thought limited to energetic adjustments prior to movement, and seemingly cannot adjust once movement begins. Even so, across the tree of life, ultrafast organisms navigate dynamic environments and generate a range of movements, suggesting unrecognized capabilities for control. We develop a framework of control pathways leveraging the non-linear dynamics of spring-propelled, latch-released systems. We analytically model spring dynamics and develop reduced-parameter models of latch dynamics to quantify how they can be tuned internally or through changing external environments. Using Lagrangian mechanics, we test feedforward and feedback control implementation via spring and latch dynamics. We establish through empirically-informed modeling that ultrafast movement can be controllably varied during latch release and spring propulsion. A deeper understanding of the interconnection between multiple control pathways, and the tunability of each control pathway, in ultrafast biomechanical systems presented here has the potential to expand the capabilities of synthetic ultra-fast systems and provides a new framework to understand the behaviors of fast organisms subject to perturbations and environmental non-idealities.
Collapse
Affiliation(s)
- N P Hyun
- John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, United States of America
| | - J P Olberding
- Department of Ecology and Evolutionary Biology, University of California Irvine, Irvine, CA 92697, United States of America
| | - A De
- John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, United States of America
| | - S Divi
- Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, PA 15213, United States of America
| | - X Liang
- Polymer Science and Engineering Department, University of Massachusetts Amherst, Amherst, MA 01003, United States of America
| | - E Thomas
- Polymer Science and Engineering Department, University of Massachusetts Amherst, Amherst, MA 01003, United States of America
| | - R St Pierre
- Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, PA 15213, United States of America
| | - E Steinhardt
- John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, United States of America
| | - J Jorge
- Biology Department, Duke University, Durham, NC 27708, United States of America
| | - S J Longo
- Biology Department, Duke University, Durham, NC 27708, United States of America
| | - S Cox
- Biology Department, Duke University, Durham, NC 27708, United States of America
| | - E Mendoza
- Department of Ecology and Evolutionary Biology, University of California Irvine, Irvine, CA 92697, United States of America
| | - G P Sutton
- School of Life Sciences, University of Lincoln, Lincoln, United Kingdom
| | - E Azizi
- Department of Ecology and Evolutionary Biology, University of California Irvine, Irvine, CA 92697, United States of America
| | - A J Crosby
- Polymer Science and Engineering Department, University of Massachusetts Amherst, Amherst, MA 01003, United States of America
| | - S Bergbreiter
- Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, PA 15213, United States of America
| | - R J Wood
- John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, United States of America
| | - S N Patek
- Biology Department, Duke University, Durham, NC 27708, United States of America
| |
Collapse
|
5
|
Avidan C, Holzman R. Elastic energy storage in seahorses leads to a unique suction flow dynamics compared with other actinopterygians. J Exp Biol 2021; 224:jeb236430. [PMID: 34477206 PMCID: PMC8443865 DOI: 10.1242/jeb.236430] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/26/2020] [Accepted: 07/07/2021] [Indexed: 12/16/2022]
Abstract
Suction feeding is a dominant prey-capture strategy across actinopterygians, consisting of a rapid expansion of the mouth cavity that drives a flow of water containing the prey into the mouth. Suction feeding is a power-hungry behavior, involving the actuation of cranial muscles as well as the anterior third of the fish's swimming muscles. Seahorses, which have reduced swimming muscles, evolved a unique mechanism for elastic energy storage that powers their suction flows. This mechanism allows seahorses to achieve head rotation speeds that are 50 times faster than those of fish lacking such a mechanism. However, it is unclear how the dynamics of suction flows in seahorses differ from the conserved pattern observed across other actinopterygians, or how differences in snout length across seahorses affect these flows. Using flow visualization experiments, we show that seahorses generate suction flows that are 8 times faster than those of similar-sized fish, and that the temporal patterns of cranial kinematics and suction flows in seahorses differ from the conserved pattern observed across other actinopterygians. However, the spatial patterns retain the conserved actinopterygian characteristics, where suction flows impact a radially symmetric region of ∼1 gape diameter outside the mouth. Within seahorses, increases in snout length were associated with slower suction flows and faster head rotation speeds, resulting in a trade-off between pivot feeding and suction feeding. Overall, this study shows how the unique cranial kinematics in seahorses are manifested in their suction-feeding performance, and highlights the trade-offs associated with their unique morphology and mechanics.
Collapse
Affiliation(s)
- Corrine Avidan
- School of Zoology, Faculty of Life Sciences, Tel Aviv University, Tel Aviv 69978, Israel
- The Inter-University Institute for Marine Sciences, PO Box 469, Eilat 88103, Israel
| | - Roi Holzman
- School of Zoology, Faculty of Life Sciences, Tel Aviv University, Tel Aviv 69978, Israel
- The Inter-University Institute for Marine Sciences, PO Box 469, Eilat 88103, Israel
| |
Collapse
|
6
|
A physical model of mantis shrimp for exploring the dynamics of ultrafast systems. Proc Natl Acad Sci U S A 2021; 118:2026833118. [PMID: 34389671 DOI: 10.1073/pnas.2026833118] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022] Open
Abstract
Efficient and effective generation of high-acceleration movement in biology requires a process to control energy flow and amplify mechanical power from power density-limited muscle. Until recently, this ability was exclusive to ultrafast, small organisms, and this process was largely ascribed to the high mechanical power density of small elastic recoil mechanisms. In several ultrafast organisms, linkages suddenly initiate rotation when they overcenter and reverse torque; this process mediates the release of stored elastic energy and enhances the mechanical power output of extremely fast, spring-actuated systems. Here we report the discovery of linkage dynamics and geometric latching that reveals how organisms and synthetic systems generate extremely high-acceleration, short-duration movements. Through synergistic analyses of mantis shrimp strikes, a synthetic mantis shrimp robot, and a dynamic mathematical model, we discover that linkages can exhibit distinct dynamic phases that control energy transfer from stored elastic energy to ultrafast movement. These design principles are embodied in a 1.5-g mantis shrimp scale mechanism capable of striking velocities over 26 m [Formula: see text] in air and 5 m [Formula: see text] in water. The physical, mathematical, and biological datasets establish latching mechanics with four temporal phases and identify a nondimensional performance metric to analyze potential energy transfer. These temporal phases enable control of an extreme cascade of mechanical power amplification. Linkage dynamics and temporal phase characteristics are easily adjusted through linkage design in robotic and mathematical systems and provide a framework to understand the function of linkages and latches in biological systems.
Collapse
|
7
|
Panessiti C, Rull-Garza M, Rickards G, Konow N. Thermal sensitivity of Axolotl feeding behaviors. Integr Comp Biol 2021; 61:1881-1891. [PMID: 34117757 DOI: 10.1093/icb/icab120] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022] Open
Abstract
Musculoskeletal movement results from muscle contractions, recoil of elastic tendons, aponeuroses, and ligaments, or combinations thereof. Muscular and elastic contributions can vary both across behaviors and with changes in temperature. Skeletal muscles reach peak contraction speed at a temperature optimum with performance declining away from that optimum by approximately 50% per 10 °C, following the Q10 principle. Elastic recoil action, however, is less temperature sensitive. We subjected Axolotls (Ambystoma mexicanum) to changes from warm (23 °C), via medium (14 °C), to cold (6 °C) temperature across most of their thermal tolerance range, and recorded jaw kinematics during feeding on crickets. We sought to determine if suction feeding strikes and food processing chews involve elastic mechanisms and, specifically, if muscular versus elastic contribution vary with temperature for gape opening and closing. Measurements of peak and mean speed for gape opening and closing during strikes and chews across temperature treatments were compared to Q10-based predictions. We found that strike gape speed decreased significantly from warm and medium to cold treatments, indicating low thermal robustness, and no performance-enhancement due to elastic recoil. For chews, peak and mean gape closing speeds, as well as peak gape opening speed, also decreased significantly from warm to cold treatments. However, peak gape opening and closing speeds for chews showed performance-enhancement, consistent with a previously demonstrated presence of elastic action in the Axolotl jaw system. Our results add to a relatively small body of evidence suggesting that elastic recoil plays significant roles in aquatic vertebrate feeding systems, and in cyclic food processing mechanisms.
Collapse
|
8
|
Burgess S. A review of linkage mechanisms in animal joints and related bioinspired designs. BIOINSPIRATION & BIOMIMETICS 2021; 16:041001. [PMID: 33848991 DOI: 10.1088/1748-3190/abf744] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/12/2020] [Accepted: 04/13/2021] [Indexed: 06/12/2023]
Abstract
This paper presents a review of biological mechanical linkage mechanisms. One purpose is to identify the range of kinematic functions that they are able to perform. A second purpose is to review progress in bioinspired designs. Ten different linkage mechanisms are presented. They are chosen because they cover a wide range of functionality and because they have potential for bioinspired design. Linkage mechanisms enable animal joints to perform highly sophisticated and optimised motions. A key function of animal linkage mechanisms is the optimisation of actuator location and mechanical advantage. This is crucially important for animals where space is highly constrained. Many of the design features used by engineers in linkage mechanisms are seen in nature, such as short coupler links, extended bars, elastic energy storage and latch mechanisms. However, animal joints contain some features rarely seen in engineering such as integrated cam and linkage mechanisms, nonplanar four-bar mechanisms, resonant hinges and highly redundant actuators. The extreme performance of animal joints together with the unusual design features makes them an important area of investigation for bioinspired designs. Whilst there has been significant progress in bioinspiration, there is the potential for more, especially in robotics where compactness is a key design driver.
Collapse
Affiliation(s)
- Stuart Burgess
- Department of Mechanical Engineering, Bristol University, (currently Visiting Fellow, Clare Hall College, Cambridge), Bristol BS8 1TR, United Kingdom
| |
Collapse
|
9
|
Bauer U, Müller UK, Poppinga S. Complexity and diversity of motion amplification and control strategies in motile carnivorous plant traps. Proc Biol Sci 2021; 288:20210771. [PMID: 34036802 PMCID: PMC8150269 DOI: 10.1098/rspb.2021.0771] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022] Open
Abstract
Similar to animals, plants have evolved mechanisms for elastic energy storage and release to power and control rapid motion, yet both groups have been largely studied in isolation. This is exacerbated by the lack of consistent terminology and conceptual frameworks describing elastically powered motion in both groups. Iconic examples of fast movements can be found in carnivorous plants, which have become important models to study biomechanics, developmental processes, evolution and ecology. Trapping structures and processes vary considerably between different carnivorous plant groups. Using snap traps, suction traps and springboard-pitfall traps as examples, we illustrate how traps mix and match various mechanisms to power, trigger and actuate motions that contribute to prey capture, retention and digestion. We highlight a fundamental trade-off between energetic investment and movement control and discuss it in a functional-ecological context.
Collapse
Affiliation(s)
- Ulrike Bauer
- School of Biological Sciences, University of Bristol, Bristol, UK
| | - Ulrike K Müller
- Department of Biology, California State University Fresno, Fresno, CA, USA
| | - Simon Poppinga
- Plant Biomechanics Group, Botanic Garden, University of Freiburg, Freiburg, Germany.,Cluster of Excellence livMatS @ FIT-Freiburg Center for Interactive Materials and Bioinspired Technologies, University of Freiburg, Freiburg, Germany
| |
Collapse
|
10
|
Abstract
Temperature influences many physiological processes that govern life as a result of the thermal sensitivity of chemical reactions. The repeated evolution of endothermy and widespread behavioral thermoregulation in animals highlight the importance of elevating tissue temperature to increase the rate of chemical processes. Yet, movement performance that is robust to changes in body temperature has been observed in numerous species. This thermally robust performance appears exceptional in light of the well-documented effects of temperature on muscle contractile properties, including shortening velocity, force, power and work. Here, we propose that the thermal robustness of movements in which mechanical processes replace or augment chemical processes is a general feature of any organismal system, spanning kingdoms. The use of recoiling elastic structures to power movement in place of direct muscle shortening is one of the most thoroughly studied mechanical processes; using these studies as a basis, we outline an analytical framework for detecting thermal robustness, relying on the comparison of temperature coefficients (Q 10 values) between chemical and mechanical processes. We then highlight other biomechanical systems in which thermally robust performance that arises from mechanical processes may be identified using this framework. Studying diverse movements in the context of temperature will both reveal mechanisms underlying performance and allow the prediction of changes in performance in response to a changing thermal environment, thus deepening our understanding of the thermal ecology of many organisms.
Collapse
Affiliation(s)
- Jeffrey P Olberding
- Department of Ecology and Evolutionary Biology, University of California, Irvine, 321 Steinhaus Hall, Irvine, CA 92697, USA
| | - Stephen M Deban
- Department of Integrative Biology, University of South Florida, 4202 East Fowler Avenue, Science Center 110, Tampa, FL 33620, USA
| |
Collapse
|
11
|
Rull M, Solomon J, Konow N. Elastic recoil action amplifies jaw closing speed in an aquatic feeding salamander. Proc Biol Sci 2020; 287:20200428. [PMID: 32429804 DOI: 10.1098/rspb.2020.0428] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022] Open
Abstract
Tendon springs often influence locomotion by amplifying the speed and power of limb joint rotation. However, less is known about elastic recoil action in feeding systems, particularly for small aquatic animals. Here, we ask if elastic recoil amplifies the speed of gape closing during aquatic food processing in the Axolotl (Ambystoma mexicanum). We measure activation of the adductor mandibulae externus via electromyography and strain of the jaw adductor muscle-tendon unit (MTU), and gape kinematics via fluoromicrometry. The muscle is pre-activated coincident with gape opening, which causes MTU stretch. Activation lasts significantly shorter for fish than cricket processing, and muscle shortening during MTU lengthening yields significantly greater elastic strain for cricket processing. The speed of MTU shortening, which dictates the speed of gape closing is 2.5-4.4 times greater than the speed of the initial shortening of the muscle fascicles for fish and cricket gape cycles, respectively. These data demonstrate a clear role for elastic recoil, which may be unexpected for a MTU in a feeding system of a small, aquatic animal. Amplification of jaw-closing speed resulting from elastic recoil likely confers ecological advantages in reducing prey escape risks during food processing in a dense and viscous fluid environment.
Collapse
Affiliation(s)
- Mateo Rull
- Department of Biological Sciences, University of Massachusetts Lowell, Lowell, MA, USA
| | - Jacob Solomon
- Department of Biological Sciences, University of Massachusetts Lowell, Lowell, MA, USA
| | - Nicolai Konow
- Department of Biological Sciences, University of Massachusetts Lowell, Lowell, MA, USA
| |
Collapse
|
12
|
Sutton GP, Mendoza E, Azizi E, Longo SJ, Olberding JP, Ilton M, Patek SN. Why do Large Animals Never Actuate Their Jumps with Latch-Mediated Springs? Because They can Jump Higher Without Them. Integr Comp Biol 2020; 59:1609-1618. [PMID: 31399734 PMCID: PMC6907395 DOI: 10.1093/icb/icz145] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023] Open
Abstract
As animals get smaller, their ability to generate usable work from muscle contraction is decreased by the muscle's force-velocity properties, thereby reducing their effective jump height. Very small animals use a spring-actuated system, which prevents velocity effects from reducing available energy. Since force-velocity properties reduce the usable work in even larger animals, why don't larger animals use spring-actuated jumping systems as well? We will show that muscle length-tension properties limit spring-actuated systems to generating a maximum one-third of the possible work that a muscle could produce-greatly restricting the jumping height of spring-actuated jumpers. Thus a spring-actuated jumping animal has a jumping height that is one-third of the maximum possible jump height achievable were 100% of the possible muscle work available. Larger animals, which could theoretically use all of the available muscle energy, have a maximum jumping height that asymptotically approaches a value that is about three times higher than that of spring-actuated jumpers. Furthermore, a size related "crossover point" is evident for these two jumping mechanisms: animals smaller than this point can jump higher with a spring-actuated mechanism, while animals larger than this point can jump higher with a muscle-actuated mechanism. We demonstrate how this limit on energy storage is a consequence of the interaction between length-tension properties of muscles and spring stiffness. We indicate where this crossover point occurs based on modeling and then use jumping data from the literature to validate that larger jumping animals generate greater jump heights with muscle-actuated systems than spring-actuated systems.
Collapse
Affiliation(s)
| | - Elizabeth Mendoza
- School of Biological Sciences, University of California, Irvine, CA, USA
| | - Emanuel Azizi
- School of Biological Sciences, University of California, Irvine, CA, USA
| | | | | | - Mark Ilton
- Department of Physics, Harvey Mudd College, Claremont, CA
| | | |
Collapse
|
13
|
St John ME, Holzman R, Martin CH. Rapid adaptive evolution of scale-eating kinematics to a novel ecological niche. J Exp Biol 2020; 223:jeb217570. [PMID: 32029459 PMCID: PMC7097200 DOI: 10.1242/jeb.217570] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2019] [Accepted: 01/29/2020] [Indexed: 01/08/2023]
Abstract
The origins of novel trophic specialization, in which organisms begin to exploit resources for the first time, may be explained by shifts in behavior such as foraging preferences or feeding kinematics. One way to investigate behavioral mechanisms underlying ecological novelty is by comparing prey capture kinematics among species. We investigated the contribution of kinematics to the origins of a novel ecological niche for scale-eating within a microendemic adaptive radiation of pupfishes on San Salvador Island, Bahamas. We compared prey capture kinematics across three species of pupfish while they consumed shrimp and scales in the lab, and found that scale-eating pupfish exhibited peak gape sizes twice as large as in other species, but also attacked prey with a more obtuse angle between their lower jaw and suspensorium. We then investigated how this variation in feeding kinematics could explain scale-biting performance by measuring bite size (surface area removed) from standardized gelatin cubes. We found that a combination of larger peak gape and more obtuse lower jaw and suspensorium angles resulted in approximately 40% more surface area removed per strike, indicating that scale-eaters may reside on a performance optimum for scale biting. To test whether feeding performance could contribute to reproductive isolation between species, we also measured F1 hybrids and found that their kinematics and performance more closely resembled generalists, suggesting that F1 hybrids may have low fitness in the scale-eating niche. Ultimately, our results suggest that the evolution of strike kinematics in this radiation is an adaptation to the novel niche of scale eating.
Collapse
Affiliation(s)
- Michelle E St John
- Department of Integrative Biology, University of California, Berkeley, Berkeley, CA 94720, USA
- Museum of Vertebrate Zoology, University of California, Berkeley, Berkeley, CA 94720, USA
| | - Roi Holzman
- School of Zoology, Tel Aviv University, Eilat 6997801, Israel
- Inter-University Institute for Marine Sciences, Eilat 8810302, Israel
| | - Christopher H Martin
- Department of Integrative Biology, University of California, Berkeley, Berkeley, CA 94720, USA
- Museum of Vertebrate Zoology, University of California, Berkeley, Berkeley, CA 94720, USA
| |
Collapse
|
14
|
Spatial and temporal changes in buccal pressure during prey-capture in the trumpetfish (Aulostomus maculatus). ZOOMORPHOLOGY 2019. [DOI: 10.1007/s00435-019-00470-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|
15
|
Olsen AM. A mobility-based classification of closed kinematic chains in biomechanics and implications for motor control. ACTA ACUST UNITED AC 2019; 222:222/21/jeb195735. [PMID: 31694932 DOI: 10.1242/jeb.195735] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
Abstract
Closed kinematic chains (CKCs), links connected to form one or more closed loops, are used as simple models of musculoskeletal systems (e.g. the four-bar linkage). Previous applications of CKCs have primarily focused on biomechanical systems with rigid links and permanently closed chains, which results in constant mobility (the total degrees of freedom of a system). However, systems with non-rigid elements (e.g. ligaments and muscles) and that alternate between open and closed chains (e.g. standing on one foot versus two) can also be treated as CKCs with changing mobility. Given that, in general, systems that have fewer degrees of freedom are easier to control, what implications might such dynamic changes in mobility have for motor control? Here, I propose a CKC classification to explain the different ways in which mobility of musculoskeletal systems can change dynamically during behavior. This classification is based on the mobility formula, taking into account the number of loops in the CKC and the nature of the constituent joint mobilities. I apply this mobility-based classification to five biomechanical systems: the human lower limbs, the operculum-lower jaw mechanism of fishes, the upper beak rotation mechanism of birds, antagonistic muscles at the human ankle joint and the human jaw processing a food item. I discuss the implications of this classification, including that mobility itself may be dynamically manipulated to simplify motor control. The principal aim of this Commentary is to provide a framework for quantifying mobility across diverse musculoskeletal systems to evaluate its potentially key role in motor control.
Collapse
Affiliation(s)
- Aaron M Olsen
- Department of Ecology and Evolutionary Biology, Brown University, Providence, RI 02912, USA
| |
Collapse
|
16
|
Longo SJ, Cox SM, Azizi E, Ilton M, Olberding JP, St Pierre R, Patek SN. Beyond power amplification: latch-mediated spring actuation is an emerging framework for the study of diverse elastic systems. ACTA ACUST UNITED AC 2019; 222:222/15/jeb197889. [PMID: 31399509 DOI: 10.1242/jeb.197889] [Citation(s) in RCA: 81] [Impact Index Per Article: 16.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Abstract
Rapid biological movements, such as the extraordinary strikes of mantis shrimp and accelerations of jumping insects, have captivated generations of scientists and engineers. These organisms store energy in elastic structures (e.g. springs) and then rapidly release it using latches, such that movement is driven by the rapid conversion of stored elastic to kinetic energy using springs, with the dynamics of this conversion mediated by latches. Initially drawn to these systems by an interest in the muscle power limits of small jumping insects, biologists established the idea of power amplification, which refers both to a measurement technique and to a conceptual framework defined by the mechanical power output of a system exceeding muscle limits. However, the field of fast elastically driven movements has expanded to encompass diverse biological and synthetic systems that do not have muscles - such as the surface tension catapults of fungal spores and launches of plant seeds. Furthermore, while latches have been recognized as an essential part of many elastic systems, their role in mediating the storage and release of elastic energy from the spring is only now being elucidated. Here, we critically examine the metrics and concepts of power amplification and encourage a framework centered on latch-mediated spring actuation (LaMSA). We emphasize approaches and metrics of LaMSA systems that will forge a pathway toward a principled, interdisciplinary field.
Collapse
Affiliation(s)
- S J Longo
- Department of Biology, Duke University, Durham, NC 27708, USA
| | - S M Cox
- Department of Kinesiology, The Pennsylvania State University, University Park, PA 16802, USA
| | - E Azizi
- Department of Ecology and Evolutionary Biology, University of California Irvine, Irvine, CA 92697, USA
| | - M Ilton
- Department of Physics, Harvey Mudd College, Claremont, CA 91711, USA
| | - J P Olberding
- Department of Ecology and Evolutionary Biology, University of California Irvine, Irvine, CA 92697, USA
| | - R St Pierre
- Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, PA 15213, USA
| | - S N Patek
- Department of Biology, Duke University, Durham, NC 27708, USA
| |
Collapse
|