Single-molecule studies on individual peptides and peptide assemblies on surfaces

Interaction of chiral L-dialanine with Cu(100)

We report on the properties of the thin films of the short peptide L-dialanine grown on Cu(100) surfaces and compare them to those of L-alanine by using surface techniques like XPS, IRRAS and STM. The first dialanine monolayer, in contact with the metallic substrate, is found to consist of whole neutral molecules in the non-zwitterionic state forming a c(2 × 4) pattern with quasi-hexagonal symmetry. The peptide bond of dialanine is preserved in the adsorption state. The ordering of the L-dialanine overlayer is shown to replicate rearrangements of the atoms of the substrate around dislocations of the latter indicating a strong molecule-surface interaction. In the multilayer regime, molecules of the second and further layers are found to be in a zwitterionic state, readily desorbing even at room temperature. The first dialanine layer is tightly bound to the substrate, begins to desorb at temperatures higher than 390 K and cracks down at the surface, transforming into a new moiety, beyond 435 K.

Interaction of cyclosporin A molecules with alkali and transition metal atoms on Cu(111)

The structure of a cyclic peptide with important biological functionalities, cyclosporin A (CsA), is investigated at the single molecule level. Its adsorption on Cu(111) under ultra-high vacuum is characterised with scanning tunnelling microscopy (STM) and density functional theory. With STM investigations, we demonstrate element specific on-surface coordination schemes of CsA with coadsorbed K, Co and Fe atoms. Thus, clear insights emerge in the behaviour of cyclic peptides at interfaces and their interactions with different metal atoms, providing control of the adsorption structure and assembly and paving the way for the integration of cyclic peptides in functional metal-organic nanostructures on surfaces.

Solvent-Dependent Self-Assemblies and Pyridine Modulation of a Porphyrin Molecule at Liquid/Solid Interfaces

On the highly oriented pyrolytic graphite (HOPG) surface, a new porphyrin molecule MT-4 containing a porphine core with six alkyl chains and two carboxyl groups has been explored using scanning tunneling microscopy (STM) technology. Solvent and pyridine regulation have been proved to be two effective ways to control and tune the supramolecular structure of MT-4 at interfaces. Different high-resolution STM (HR-STM) images with highly ordered and closely packed arrangements were gained at the corresponding liquid-solid interface, including phenyl octane (PO), 1-heptanoic acid (HA), and 1-hexanol. Except for the solvent effect, introducing pyridine derivatives such as 4,4'-vinylenedipyridine (DPE) and 4,4'-((1E,1'E)-(2,5-bis(octyloxy)-1,4-phenylene) bis(ethene-2,1-diyl)) dipyridine (PEBP-C8) is also effective to modulate the self-assembly of MT-4. With careful analysis of the STM pictures and the density functional theory (DFT) computational exploration, we figured out the molecular model, interaction energies, and self-assembly mechanism of each system at the interface. This work provides a simple and effective approach for quickly building diverse nanoarchitectures by utilizing different noncovalent interactions. Meanwhile, it would give a perspective to regulate and control self-assembly arrays for devising novel molecular-based materials through more optimal strategies.

Patterning Porous Networks through Self-Assembly of Programmed Biomacromolecules

Two-dimensional (2D) porous networks are of great interest for the fabrication of complex organized functional materials for potential applications in nanotechnologies and nanoelectronics. This review aims at providing an overview of bottom-up approaches towards the engineering of 2D porous networks by using biomacromolecules, with a particular focus on nucleic acids and proteins. The first part illustrates how the advancements in DNA nanotechnology allowed for the attainment of complex ordered porous two-dimensional DNA nanostructures, thanks to a biomimetic approach based on DNA molecules self-assembly through specific hydrogen-bond base pairing. The second part focuses the attention on how polypeptides and proteins structural properties could be used to engineer organized networks templating the formation of multifunctional materials. The structural organization of all examples is discussed as revealed by scanning probe microscopy or transmission electron microscopy imaging techniques.

Polarization Induced Electro-Functionalization of Pore Walls: A Contactless Technology

This review summarizes recent advances in micro- and nanopore technologies with a focus on the functionalization of pores using a promising method named contactless electro-functionalization (CLEF). CLEF enables the localized grafting of electroactive entities onto the inner wall of a micro- or nano-sized pore in a solid-state silicon/silicon oxide membrane. A voltage or electrical current applied across the pore induces the surface functionalization by electroactive entities exclusively on the inside pore wall, which is a significant improvement over existing methods. CLEF's mechanism is based on the polarization of a sandwich-like silicon/silicon oxide membrane, creating electronic pathways between the core silicon and the electrolyte. Correlation between numerical simulations and experiments have validated this hypothesis. CLEF-induced micro- and nanopores functionalized with antibodies or oligonucleotides were successfully used for the detection and identification of cells and are promising sensitive biosensors. This technology could soon be successfully applied to planar configurations of pores, such as restrictions in microfluidic channels.

Self-assembly of photochromic diarylethene-peptide conjugates stabilized by β-sheet formation at the liquid/graphite interface

Two-dimensional (2-D) self-assembly of diarylethene (DAE)-peptide conjugates at the octanoic acid/graphite interface was investigated by scanning tunnelling microscopy (STM). The open-ring isomer of a DAE-peptide conjugate formed a stable 2-D molecular assembly with an antiparallel β-sheet structure. Quantitative analysis of surface coverage depending on concentration revealed a stronger stabilization effect of the oligopeptide than that of the alkyl group with a similar side chain length.

Supramolecular Assemblies on Surfaces: Nanopatterning, Functionality, and Reactivity

Understanding how molecules interact to form large-scale hierarchical structures on surfaces holds promise for building designer nanoscale constructs with defined chemical and physical properties. Here, we describe early advances in this field and highlight upcoming opportunities and challenges. Both direct intermolecular interactions and those that are mediated by coordinated metal centers or substrates are discussed. These interactions can be additive, but they can also interfere with each other, leading to new assemblies in which electrical potentials vary at distances much larger than those of typical chemical interactions. Earlier spectroscopic and surface measurements have provided partial information on such interfacial effects. In the interim, scanning probe microscopies have assumed defining roles in the field of molecular organization on surfaces, delivering deeper understanding of interactions, structures, and local potentials. Self-assembly is a key strategy to form extended structures on surfaces, advancing nanolithography into the chemical dimension and providing simultaneous control at multiple scales. In parallel, the emergence of graphene and the resulting impetus to explore 2D materials have broadened the field, as surface-confined reactions of molecular building blocks provide access to such materials as 2D polymers and graphene nanoribbons. In this Review, we describe recent advances and point out promising directions that will lead to even greater and more robust capabilities to exploit designer surfaces.

Kinetics of Surface-Driven Self-Assembly and Fatigue-Induced Disassembly of a Virus-Based Nanocoating

Self-assembling protein layers provide a "bottom-up" approach for precisely organizing functional elements at the nanoscale over a large solid surface area. The design of protein sheets with architecture and physical properties suitable for nanotechnological applications may be greatly facilitated by a thorough understanding of the principles that underlie their self-assembly and disassembly. In a previous study, the hexagonal lattice formed by the capsid protein (CA) of human immunodeficiency virus (HIV) was self-assembled as a monomolecular layer directly onto a solid substrate, and its mechanical properties and dynamics at equilibrium were analyzed by atomic force microscopy. Here, we use atomic force microscopy to analyze the kinetics of self-assembly of the planar CA lattice on a substrate and of its disassembly, either spontaneous or induced by materials fatigue. Both self-assembly and disassembly of the CA layer are cooperative reactions that proceed until a phase equilibrium is reached. Self-assembly requires a critical protein concentration and is initiated by formation of nucleation points on the substrate, followed by lattice growth and eventual merging of CA patches into a continuous monolayer. Disassembly of the CA layer showed hysteresis and appears to proceed only after large enough defects (nucleation points) are formed in the lattice, whose number is largely increased by inducing materials fatigue that depends on mechanical load and its frequency. Implications of the kinetic results obtained for a better understanding of self-assembly and disassembly of the HIV capsid and protein-based two-dimensional nanomaterials and the design of anti-HIV drugs targeting (dis)assembly and biocompatible nanocoatings are discussed.

Two-Dimensional Folding of Polypeptides into Molecular Nanostructures at Surfaces

Herein we report the fabrication of molecular nanostructures on surfaces via two-dimensional (2D) folding of the nine amino acid peptide bradykinin. Soft-landing electrospray ion beam deposition in conjunction with high-resolution imaging by scanning tunneling microscopy is used to fabricate and investigate the molecular nanostructures. Subnanometer resolved images evidence the large conformational freedom of the molecules if thermal motion is inhibited and the formation of stable uniform dimers of only one specific conformation when diffusion can take place. Molecular dynamics modeling supported by density functional theory calculations give atomically precise insight into the induced-fit binding scheme when the folded dimer is formed. In the absence of solvent, we find a hierarchy of binding strength from polar to nonpolar, manifested in an inverted polar-nonpolar segregation which suppresses unspecific interactions at the rim of the nanostructure. The demonstrated 2D-folding scheme resembles many key properties of its native 3D counterpart and shows that functional, molecular nanostructures on surfaces fabricated by folding could be just as versatile and specific.

Nanoscale Surface Modifications of Orthopaedic Implants: State of the Art and Perspectives

Background:

Orthopaedic implants such as the total hip or total knee replacement are examples of surgical interventions with postoperative success rates of over 90% at 10 years. Implant failure is associated with wear particles and pain that requires surgical revision. Improving the implant - bone surface interface is a key area for biomaterial research for future clinical applications. Current implants utilise mechanical, chemical or physical methods for surface modification.

Methods:

A review of all literature concerning the nanoscale surface modification of orthopaedic implant technology was conducted.

Results:

The techniques and fabrication methods of nanoscale surface modifications are discussed in detail, including benefits and potential pitfalls. Future directions for nanoscale surface technology are explored.

Conclusion:

Future understanding of the role of mechanical cues and protein adsorption will enable greater flexibility in surface control. The aim of this review is to investigate and summarise the current concepts and future directions for controlling the implant nanosurface to improve interactions.