The levansucrase and inulosucrase enzymes of Lactobacillus reuteri 121 catalyse processive and non-processive transglycosylation reactions

Multistrategy Engineering of an Inulosucrase to Enhance the Activity and Thermostability for Efficient Production of Microbial Inulin

Inulin has found commercial applications in the pharmaceutical, nutraceutical, and food industries due to its beneficial health effects. The enzymatic biosynthesis of microbial inulin has garnered increasing attention. In this study, molecular modification was applied to Lactobacillus mulieris UMB7800 inulosucrase, an enzyme that specifically produces high-molecular weight inulin, to enhance its catalytic activity and thermostability. Among the 18 variable regions, R5 was identified as a crucial region significantly impacting enzymatic activity by replacing it with more conserved sequences. Site-directed mutagenesis combined with saturated mutagenesis revealed that the mutant A250 V increased activity by 68%. Additionally, after screening candidate mutants by rational design, four single-point mutants, S344D, H434P, E526D, and G531P, were shown to enhance thermostability. The final combinational mutant, M5, exhibited a 66% increase in activity and a 5-fold enhancement in half-life at 55 °C. These findings are significant for understanding the catalytic activity and thermostability of inulosucrase and are promising for the development of microbial inulin biosynthesis platforms.

A review of fructosyl-transferases from catalytic characteristics and structural features to reaction mechanisms and product specificity

Carbohydrate-active enzymes are accountable for the synthesis and degradation of glycosidic bonds among diverse carbohydrates. Fructosyl-transferases represent a subclass of these enzymes, employing sucrose as a substrate to generate fructooligosaccharides (FOS) and fructan polymers. This category primarily includes levansucrase (LS, EC 2.4.1.10), inulosucrase (IS, EC 2.4.1.9), and β-fructofuranosidase (Ffase, EC 3.2.1.26). These three enzymes possess a similar five-bladed β-propeller fold and employ an anomer-retaining reaction mechanism mediated by nucleophiles, transition state stabilizers, and general acids/bases. However, they exhibit distinct product profiles, characterized by variations in linkage specificity and molecular mass distribution. Consequently, this article comprehensively explores recent advancements in the catalytic characteristics, structural features, reaction mechanisms, and product specificity of levansucrase, inulosucrase, and β-fructofuranosidase (abbreviated as LS, IS, and Ffase, respectively). Furthermore, it discusses the potential for modifying catalytic properties and product specificity through structure-based design, which enables the rational production of custom fructan and FOS.

Characterization of levans produced by levansucrases from Bacillus amyloliquefaciens and Gluconobacter oxydans: Structural, techno-functional, and anti-inflammatory properties

Levans of different structures and molecular weights (MW) can display various techno-functional and health-promoting properties. In the present study, selected levans were produced by the transfructosylation of sucrose catalyzed by levansucrases from Bacillus amyloliquefaciens and Gluconobacter oxydans, and their structural, techno-functional and anti-inflammatory properties were investigated. NMR and methylation/GC analysis confirmed the structure of β-(2, 6) levans. The structural characterization led to the classification of levans as high MW (HMW, ≥100 kDa), low MW (LMW, ≤20 kDa) and mix L/HMW ones. Levan with higher MW had more linear fructosyl units with fewer reducing ends and branching residues. LMW levan showed the highest foaming capacity and stability while HMW levan had the highest emulsion stability. HMW and mix L/HMW levans showed comparable water and oil-holding capacities, which were higher than LMW. HMW and mix L/HMW levans were found to have gelling properties at low concentrations. The rheological behaviour of HMW levan-based gel was a more viscous-like gel, while that of mix L/HMW levan-based one showed more elastic solid like-gel. The temperature also influenced the rheology of levan, showing that the mix L/HMW levan gel network was the most thermal stable as its viscoelasticity remained constant at the highest temperature (75 °C). Studies on the biological activity of levans of HMW and LMW revealed in-vitro anti-inflammatory properties as they significantly reduced the production of LPS-triggered pro-inflammatory cytokines in differentiated Caco-2 cells.

Insights into the heterogeneity of levan polymers synthesized by levansucrase Bs-SacB from Bacillus subtilis 168

Levan is an enzymatically synthesized fructose polymer with widely reported structural heterogeneity depending on the producing levansucrase, the reaction conditions employed for its synthesis and the characterization techniques. We studied here the specific properties of levan produced by recombinant levansucrase from B. subtilis 168 (Bs-SacB), often characterized as a bimodal distribution, that is, a mixture of low and high molecular weight levan. We found significant differences between both levans in terms of the already reported molecular weight, size and morphology using different analytical methods. The low molecular weight levan consists of a non-uniform polymer ranging from 50 to 230 kDa, synthesized through a non-processive mechanism that can spontaneously form spherical nanoparticles in the reaction medium. In contrast, high molecular weight levan is a uniform polymer, most probably synthesized through a processive mechanism, with an average molecular weight of 30,750 kDa and a poorly defined nano-structure. This is the first report exploring differences in morphology between low and high molecular weight levans. Our findings demonstrate that only the low molecular weight levan forms spherical nanoparticles in the reaction medium and that high molecular weight levan is mainly composed of a 33,000 kDa fraction with a microgel behavior.

Identification of a Thermostable Levansucrase from Pseudomonas orientalis That Allows Unique Product Specificity at Different Temperatures

The biological production of levan by levansucrase (LS, EC 2.4.1.10) has aroused great interest in the past few years. Previously, we identified a thermostable levansucrase from Celerinatantimonas diazotrophica (Cedi-LS). A novel thermostable LS from Pseudomonas orientalis (Psor-LS) was successfully screened using the Cedi-LS template. The Psor-LS showed maximum activity at 65 °C, much higher than the other LSs. However, these two thermostable LSs showed significantly different product specificity. When the temperature was decreased from 65 to 35 °C, Cedi-LS tended to produce high-molecular-weight (HMW) levan. By contrast, Psor-LS prefers to generate fructooligosaccharides (FOSs, DP ≤ 16) rather than HMW levan under the same conditions. Notably, at 65 °C, Psor-LS would produce HMW levan with an average Mw of 1.4 × 106 Da, indicating that a high temperature might favor the accumulation of HMW levan. In summary, this study allows a thermostable LS suitable for HMW levan and levan-type FOSs production simultaneously.

Characterization of a processive inulosucrase from Lactobacillus mulieris for efficient biosynthesis of high-molecular-weight inulin

Inulin has been determined to have many exceptional properties and functions and has been used in the food and pharmaceutical fields. Recently, microbial high-molecular-weight inulin synthesized from sucrose by inulosucrase attracted much attention. In this study, a novel inulosucrase from Lactobacillus mulieris was constructed, overexpressed, purified, and identified. The recombinant enzyme displayed the maximum activity at pH 6.0 and 55 °C, and it exhibited high thermostability below 45 °C. After optimizing the production conditions, the conversion rate from 100 g/L sucrose to inulin reached 31 %, meanwhile, the maximum molecular weight of produced inulin reached 3.21 × 10⁶ g/mol. The truncated IS showed a "processive" transfructosylation process, only synthesizing a small number of short-chain oligosaccharides with polymerization degrees below 6, which was in favor of the accumulation of high-molecular-weight inulin. Given this, L. mulieris inulosucrase might be a good potential candidate for the industrial production of high-molecular-weight inulin.

Fructan Biosynthesis by Yeast Cell Factories

Fructan is a polysaccharide composed of fructose and can be classified into several types, such as inulin, levan, and fructo-oligosaccharides, based on their linkage patterns and degree of polymerization. Owing to its structural and functional diversity, fructan has been used in various fields including prebiotics, foods and beverages, cosmetics, and pharmaceutical applications. With increasing interest in fructans, efficient and straightforward production methods have been explored. Since the 1990s, yeast cells have been employed as producers of recombinant enzymes for enzymatic conversion of fructans including fructosyltransferases derived from various microbes and plants. More recently, yeast cell factories are highlighted as efficient workhorses for fructan production by direct fermentation. In this review, recent advances and strategies for fructan biosynthesis by yeast cell factories are discussed.

High-yield production and purification of prebiotic inulin-type fructooligosaccharides

Due to the health-promoting effects and functional properties of inulin-type fructooligosaccharides (I-FOS), the global market for I-FOS is constantly growing. Hence, there is a continuing demand for new, efficient biotechnological approaches for I-FOS production. In this work, crude inulosucrase InuGB-V3 from Lactobacillus gasseri DSM 20604 was used to synthesize I-FOS from sucrose. Supplementation with 1 mM CaCl2, a pH of 3.5–5.5, and an incubation temperature of 40 °C were found to be optimal production parameters at which crude inulosucrase showed high conversion rates, low sucrose hydrolysis, and excellent stability over 4 days. The optimal process conditions were employed in cell-free bioconversion reactions. By elevating the substrate concentration from 570 to 800 g L−1, the I-FOS concentration and the synthesis of products with a low degree of polymerization (DP) could be increased, while sucrose hydrolysis was decreased. Bioconversion of 800 g L−1 sucrose for 20 h resulted in an I-FOS-rich syrup with an I-FOS concentration of 401 ± 7 g L−1 and an I-FOS purity of 53 ± 1% [w/w]. I-FOS with a DP of 3–11 were synthesized, with 1,1-kestotetraose (DP4) being the predominant transfructosylation product. The high-calorie sugars glucose, sucrose, and fructose were removed from the generated I-FOS-rich syrup using activated charcoal. Thus, 81 ± 5% of the initially applied I-FOS were recovered with a purity of 89 ± 1%.

Directionally modulating the product chain length of an inulosucrase by semi-rational engineering for efficient production of 1-kestose

Microbial inulosucrase as a transfructosylation tool has been used to produce inulin and inulin-type fructooligosaccharides with various polymerization degrees. Tailor-made oligosaccharides could be generated by inulosucrase via chain length modulation. In this study, a semi-rational design based on the modeled structure of Lactobacillus reuteri 121 inulosucrase was carried out to screen and construct variants. The residues Arg541 and Arg544 were determined to be significant to the product chain elongation of L. reuteri 121 inulosucrase. The variant R544W altered the product specificity of inulosucrase and produced short-chain fructooligosaccharides with 1-kestose as the main component. Molecular dynamic simulations verified an increased binding free energy of variant R544W with 1-kestose than the wild-type enzyme with 1-kestose. After optimization, 1-kestose and total short-chain fructooligosaccharides production reached approximately 206 g/L and 307 g/L, respectively. This study suggests the great potential of variant R544W in the biotransformation from sucrose to functional sugar.

Structure–Function Relationship Studies of Multidomain Levansucrases from Leuconostocaceae Family

Levansucrase LevS from Leuconostoc mesenteroides B-512F is a multidomain fructansucrase (MD-FN) that contains additional domains (ADs) to the catalytic domain. However, the understanding of the effect that these ADs have on enzyme activity remains vague. To this aim, structure-function relationship studies of these LevS ADs were performed by evaluating both biochemical properties and the enzymatic capacity of truncated versions of LevS. Joint participation of the N- and C-terminal domains is essential for stability, activity, specificity, and polymerization processes. Specifically, the N-terminal region is involved in stability, while the transition region plays an essential role in the transfructosylation reaction and polymer elongation. Based on our results, we suggest that ADs interact with each other, adopting a U-shaped topology. The importance of these ADs observed in the MD-FN of the Leuconostocaceae family is not shared by the Lactobacillaceae family. Phylogenetic analysis of LevS AD suggests that MD-FN from Lactobacillaceae and Leuconostocaceae have different evolutionary origins. This is the first study on the structure-function relationship of multidomain levansucrases from the Leuconostocaceae family. Our results point towards the functional role of AD in MD-FN and its involvement in fructan synthesis.

Exopolysaccharides Produced by Lactic Acid Bacteria: From Biosynthesis to Health-Promoting Properties

The production of exopolysaccharides (EPS) by lactic acid bacteria (LAB) has attracted particular interest in the food industry. EPS can be considered as natural biothickeners as they are produced in situ by LAB and improve the rheological properties of fermented foods. Moreover, much research has been conducted on the beneficial effects of EPS produced by LAB on modulating the gut microbiome and promoting health. The EPS, which varies widely in composition and structure, may have diverse health effects, such as glycemic control, calcium and magnesium absorption, cholesterol-lowering, anticarcinogenic, immunomodulatory, and antioxidant effects. In this article, the latest advances on structure, biosynthesis, and physicochemical properties of LAB-derived EPS are described in detail. This is followed by a summary of up-to-date methods used to detect, characterize and elucidate the structure of EPS produced by LAB. In addition, current strategies on the use of LAB-produced EPS in food products have been discussed, focusing on beneficial applications in dairy products, gluten-free bakery products, and low-fat meat products, as they positively influence the consistency, stability, and quality of the final product. Highlighting is also placed on reports of health-promoting effects, with particular emphasis on prebiotic, immunomodulatory, antioxidant, cholesterol-lowering, anti-biofilm, antimicrobial, anticancer, and drug-delivery activities.

Characterization of a novel fructosyltransferase InuCA from Lactobacillus crispatus that attaches to the cell surface by electrostatic interaction

Fructosyltransferases (FTases), a group of carbohydrate-active enzymes, synthesize fructooligosaccharides (FOS) and fructans, which are promising prebiotics for human health. Here we originally identified a novel FTase InuCA from L. crispatus, a dominant species in the vaginal microbiotas of human. InuCA was characterized by a shortest C-terminus and the highest isoelectric point among the reported Lactobacillus FTases. InuCA was an inulosucrase and produced a serial of FOS using sucrose as substrate at a moderate temperature. Surprisingly, the C-terminal deletion mutant synthesized oligosaccharides with fructosyl chain longer than that of the wild type, suggesting that the C-terminal part blocked the binding of long-chain receptor. Moreover, InuCA bound to the cell surface by electrostatic interaction, which was dependent on the environmental pH and represented a distinctive binding mode in FTases. The catalytic and structural properties of InuCA will be contributed to the FTases engineering and the knowledge of the adaptation of L. crispatus in the vaginal environment. Importance L. crispatus is one of the most important species in human vaginal microbiotas and its persistence is strongly negatively correlated with the vaginal diseases. Our research reveals that a novel inulosucrase InuCA is present in L. cirspatus. InuCA keeps the ability to synthesize prebiotic fructo-oligosaccharides, although it lacks a large part of the C-terminal region compared to other FTases. Remarkably, the short C-terminus of InuCA blocks the transfructosylation activity for producing oligosaccharides with longer chain, which is meaningful to the directional modification of FTases and the oligosaccharide products. Besides the catalytic activity, InuCA is anchored on the cell surface dependent on the environmental pH and may be also involved in the adhesion of L. crispatus to the vaginal epithelial cells. Since L. crispatus plays an essential role in the normal vaginal micro-ecosystem, the described work will be helpful to elucidate the functional genes and colonization mechanism of the dominant species.

Synergistic enzyme cocktail between levansucrase and inulosucrase for superb levan-type fructooligosaccharide synthesis

Inulosucrase (ISC) and levansucrase (LSC) utilise sucrose and produce inulin- and levan-type fructans, respectively. This study aims to propose a new strategy to improve levan-type fructooligosaccharide (L-FOS) production. The effect of ISC/ LSC -mixed reaction was elucidated on L-FOS production. The presence of ISC in the LSC reaction significantly leads to the higher production of L-FOSs as the main products. Furthermore, the different ratios between ISC and LSC affected the distribution of L-FOSs. A greater amount of ISC compared to LSC promoted the synthesis of short-chain L-FOSs. Conversely, when LSC was increased, the synthesis of longer-chain L-FOSs was enhanced. The addition of trisaccharide mixtures obtained from either a single ISC or LSC reaction could enhance L-FOSs synthesis in the LSC reaction. Analysis of these trisaccharides revealed that most species of the oligosaccharides were similar, with 1-kestose being the major one. The supplement of only 1-kestose in the LSC reaction showed similar results to those of the reaction in the presence of trisaccharide mixtures. Moreover, the results were supported by molecular dynamics simulations. This work not only provides an improvement in L-FOS production but also revealed and supported some insights into the mechanism of fructansucrases.

Safety assessment of β-fructofuranosidase from Aspergillus brunneoviolaceus

β-Fructofuranosidase (β-D-fructofuranoside fructohydrolase; EC 3.2.1.26) is used in the production of fructo-oligosaccharides that are commonly used by the food industry as prebiotics for their purported health benefits. The β-fructofuranosidase discussed herein is obtained from a novel source organism that is a non-genetically modified strain of Aspergillus brunneoviolaceus, which phylogenetically belongs to the Aspergillus section Nigri. The safety of β-fructofuranosidase was evaluated in a series of toxicology studies as prescribed by Tier 1 toxicity testing by the European Food Safety Authority, including an evaluation of the mutagenicity and genotoxicity potential using the in vitro bacterial reverse mutation and mammalian chromosomal aberration assays, as well as systemic toxicity in a 90-day oral subchronic toxicity study in Sprague-Dawley rats. β-Fructofuranosidase was demonstrated to lack mutagenic or genotoxic potential based on the results of the in vitro assays due to absence of increased revertant colonies in the bacterial reverse mutation test and incidence of chromosome aberrations in the chromosomal aberration assay. Administration of β-fructofuranosidase by gavage at doses up to 1200 mg total organic solids (TOS)/kg body weight/day for 90 days did not elicit any systemic toxic effects in rats based on a lack of adverse effect in any study parameter, and therefore the no-observed-adverse-effect level of β-fructofuranosidase was concluded to be 1200 mg TOS/kg body weight/day, the highest dose tested. The results of the toxicology studies on β-fructofuranosidase from A. brunneoviolaceus demonstrate this species to be a safe and suitable source of enzymes for use by the food industry.

Integrative growth physiology and transcriptome profiling of probiotic Limosilactobacillus reuteri KUB-AC5

Limosilactobacillus reuteri KUB-AC5 has been widely used as probiotic in chicken for Salmonella reduction. However, a preferable carbon source and growth phase is poorly characterized underlying metabolic responses on growth and inhibition effects of L. reuteri KUB-AC5. This study therefore aimed to investigate transcriptome profiling of L. reuteri KUB-AC5 revealing global metabolic responses when alteration of carbon sources and growth phases. Interestingly, L. reuteri KUB-AC5 grown under sucrose culture showed to be the best for fast growth and inhibition effects against Salmonella Enteritidis S003 growth. Towards the transcriptome profiling and reporter proteins/metabolites analysis, the results showed that amino acid transport via ABC systems as well as sucrose metabolism and transport are key metabolic responses at Logarithmic (L)-phase of L. reuteri KUB-AC5 growth. Considering the Stationary (S)-phase, we found the potential reporter proteins/metabolites involved in carbohydrate metabolism e.g., levansucrase and levan. Promisingly, levansucrase and levan were revealed to be candidates in relation to inhibition effects of L. reuteri KUB-AC5. Throughout this study, L. reuteri KUB-AC5 had a metabolic control in acclimatization to sucrose and energy pools through transcriptional co-regulation, which supported the cell growth and inhibition potentials. This study offers a perspective in optimizing fermentation condition through either genetic or physiological approaches for enhancing probiotic L. reuteri KUB-AC5 properties.

Production of bimodal molecular weight levan by a Lactobacillus reuteri isolate from fish gut

An exopolysaccharide (EPS) synthesizing potentially probiotic Gram-positive bacterial strain was isolated from fish (Tor putitora) gut, and its EPS was structurally characterized. The isolate, designated as FW2, was identified as Lactobacillus reuteri through 16S rRNA gene sequencing and phylogenetic analysis. This isolate produces fructan-type EPS using sucrose as a substrate. Based on ¹³C-NMR spectroscopy, methylation analysis and monosaccharide composition, the EPS was identified as a linear levan polymer with fructose as main constituent linked via β(2 → 6) linkages. Based on molecular weight (MW) distribution, two groups of levan were found to be produced by the isolate FW2: one with high MW (4.6 × 10⁶ Da) and the other having much lower MW (1.2 × 10⁴ Da). The isolate yielded about 14 g/L levan under optimized culturing parameters including aeration conditions, pH, temperature and substrate concentration. The obtained bimodal molecular weight linear levan is the first of its type to be synthesized by a L. reuteri isolate from fish gut. Bimodal molecular weight prebiotic levan together with the probiotic potential of the producing strain would provide a new promising synbiotic combination for use in aqua culture.

Inulin as a Delivery Vehicle for Targeting Colon-Specific Cancer

Natural polysaccharides, as well as biopolymers, are now days widely developed for targeting colon cancer using various drug delivery systems. Currently, healing conformations are being explored that can efficiently play a multipurpose role. Owing to the capability of extravagance colonic diseases with the least adverse effects, biopolymers for site specific colon delivery have developed an increased curiosity over the past decades. Inulin (INU) was explored for its probable application as an entrapment material concerning its degradation by enzymes in the colonic microflora and its drug release behavior in a sustained and controlled manner. INU is a polysaccharide and it consists of 2 to 1 linkage having an extensive array of beneficial uses such as a carrier for delivery of therapeutic agents as an indicative/investigative utensil or as a dietary fiber with added well-being aids. In the main, limited research, as well as information, is available on the delivery of therapeutic agents using inulin specifically for colon cancer because of its capability to subsist in the stomach's acidic medium. This exceptional steadiness and robustness properties are exploited in numerous patterns to target drugs securely for the management of colonic cancer, where they effectively act and kills colonic tumor cells easily. In this review article, recent efforts and inulin-based nano-technological approaches for colon cancer targeting are presented and discussed.

Levan from Leuconostoc citreum BD1707: production optimization and changes in molecular weight distribution during cultivation

Background

Levan is a well-known homopolymer of fructose composed predominantly of β-(2, 6) fructofuranosyl linkages in the backbone with occasional β-(2, 1) linkages in the branch chains with varied applications. However, high production cost due to low yield of microbial levan has become a bottleneck for its practical applications. Furthermore, factors affecting the molecular mass of the synthesized levan by Leuconostoc spp. during prolonged cultivation is not fully elucidated.

Methods

The cultivation condition for Leuconostoc citreum BD1707 to synthesize levan was optimized by single-factor experiments and subsequently with response surface methodology (RSM). The average molecular weight (Mw) of levan synthesized by the strain L.citreum BD1707 under the optimized cultivation conditions was monitored by high-performance size exclusion chromatography (HPSEC). Finally, the enzyme with levan-degrading activity was determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE).

Results

The levan yield of BD1707 reached 34.86 g/L with a corresponding productivity of 7.47 g/L/d under the optimal cultivation conditions deduced by RSM, i.e., cultivation at 26 °C and 200 rpm for 112 h in tomato juice supplemented with 172 g/L sucrose with an initial pH value of 6.12. The Mw of levan reached a peak value of 2.320 × 10⁷ Da at 6 h of cultivation under the optimized cultivation conditions and then gradually decreased to 8.809 × 10⁶ Da after 120 h of cultivation.

Conclusion

The levan yield of the strain L.citreum BD1707 could be sufficiently enhanced via cultivation condition optimization. The decrease in molecular mass of the synthesized levan was attributed predominantly to the hydrolytic activity of levansucrase secreted by L.citreum BD1707 during cultivation, with an estimated Mw of 130 KD by SDS-PAGE, while the effect of acid hydrolysis could be nearly neglected.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12896-021-00673-y.

High-resolution method for isocratic HPLC analysis of inulin-type fructooligosaccharides

In recent decades, strategies to improve human health by modulating the gut microbiota have developed rapidly. One of the most prominent is the use of prebiotics, which can lead to a higher abundance of health-promoting microorganisms in the gut. Currently, oligosaccharides dominate the prebiotic sector due to their ability to promote the growth and activity of probiotic bacteria selectively. Extensive efforts are made to develop effective production strategies for the synthesis of prebiotic oligosaccharides, including the use of microbial enzymes. Within the genus Lactobacillus, several inulosucrases have been identified, which are suitable for the synthesis of prebiotic inulin-type fructooligosaccharides (inulin-FOS). In this study, a truncated version of the inulosucrase from Lactobacillus gasseri DSM 20604 was used for the efficient synthesis of inulin-FOS. Product titers of 146.2 ± 7.4 g inulin-FOSL^-1 were achieved by the catalytic activity of the purified recombinant protein InuGB-V3. A time and resource-saving HPLC method for rapid analysis of inulin-FOS in isocratic mode was developed and optimized, allowing baseline separated analysis of inulin-FOS up to a degree of polymerization (DP) of five in less than six minutes. Long-chain inulin-FOS with a DP of 17 can be analyzed in under 45 min. The developed method offers the advantages of isocratic HPLC analysis, such as low flow rates, high sensitivity, and the use of a simple, inexpensive chromatographic setup. Furthermore, it provides high-resolution separation of long-chain inulin-FOS, which can usually only be achieved with gradient systems.

Insights into extracellular dextran formation by Liquorilactobacillus nagelii TMW 1.1827 using secretomes obtained in the presence or absence of sucrose

Dextrans are α-(1,6)-linked glucose polymers, which are exclusively produced by lactic acid bacteria from sucrose via extracellular dextransucrases. Previous studies suggested that the environmental pH and the presence of sucrose can impact the release and activity of these enzymes. To get deeper insight into this phenomenon, the dextransucrase expressed by water kefir borne Liquorilactobacillus (L.) nagelii TMW 1.1827 (formerly Lactobacillus nagelii) was recovered in supernatants of buffered cell suspensions that had been incubated with or without sucrose and at different pH. The obtained secretomes were used to time-dependently produce and recover dextrans, whose molecular and macromolecular structures were determined by methylation analysis and AF4-MALS-UV measurements, respectively. The initial pH of the buffered cell suspensions had solely a minor influence on the released dextransucrase activity. When sucrose was present during incubation, the secretomes contained significantly higher dextransucrase activities, although the amounts of totally released proteins obtained with or without sucrose were comparable. However, the dextransucrase appeared to be released in lower amounts into the environment if sucrose was not present. The amount of isolable dextran increased up to 24 h of production, although the total sucrose was consumed within the first 10 min of incubation. Furthermore, the sucrose isomer leucrose had been formed after 10 min, while its concentrations decreased over time and the portions of longer isomaltooligosaccharides (IMOs) increased. This indicated that leucrose can be used by L. nagelii TMW 1.1827 to produce more elongated and branched dextran molecules from presynthesized IMOs, while disproportionation reactions on short IMOs may appear additionally. This leads to increasing amounts of high molecular weight dextran in a state of sucrose depletion. These findings reveal new insights into the pH- and sucrose-dependent kinetics of extracellular dextran formation and may be useful for optimization of fermentative and enzymatic dextran production processes.

Insight into the effects and biotechnological production of kestoses, the smallest fructooligosaccharides

Kestoses, the smallest fructooligosaccharides, are trisaccharides composed of a fructose molecule and a sucrose molecule linked by either β-(2,1) or β-(2,6) linkage. 1-kestose, 6-kestose and neokestose are the three types of kestoses occurring in nature. As the main kind of fructooligosaccharide, kestoses share similar physiological effects with other fructooligosaccharides, and they have recently been determined to show more notable effects in promoting the growth of probiotics including Faecalibacterium prausnitzii and Bifidobacterium than those of other fructooligosaccharides. Kestoses exist in many plants, but the relatively low content and the isolation and purification are the main barriers limiting their industrial application. The production of kestoses by enzymatic biosynthesis and microbial fermentation has the potential to facilitate its production and industrial use. In this article, the recent advances in the research of kestoses were overviewed, including those studying their functions and production. Kestose-producing enzymes were introduced in detail, and microbial production and fermentation optimization techniques for enhancing the yield of kestoses were addressed. β-Fructofuranosidase is the main one used to produce kestoses because of the extensive range of microbial sources. Therefore, the production of kestoses by microorganisms containing β-fructofuranosidase has also been reviewed. However, few molecular modification studies have attempted to change the production profile of some enzymes and improve the yield of kestoses, which is a topic that should garner more attention. Additionally, the production of kestoses using food-grade microorganisms may be beneficial to their application in the food industry.

Investigating the Product Profiles and Structural Relationships of New Levansucrases with Conventional and Non-Conventional Substrates

The synthesis of complex oligosaccharides is desired for their potential as prebiotics, and their role in the pharmaceutical and food industry. Levansucrase (LS, EC 2.4.1.10), a fructosyl-transferase, can catalyze the synthesis of these compounds. LS acquires a fructosyl residue from a donor molecule and performs a non-Lenoir transfer to an acceptor molecule, via β-(2→6)-glycosidic linkages. Genome mining was used to uncover new LS enzymes with increased transfructosylating activity and wider acceptor promiscuity, with an initial screening revealing five LS enzymes. The product profiles and activities of these enzymes were examined after their incubation with sucrose. Alternate acceptor molecules were also incubated with the enzymes to study their consumption. LSs from Gluconobacter oxydans and Novosphingobium aromaticivorans synthesized fructooligosaccharides (FOSs) with up to 13 units in length. Alignment of their amino acid sequences and substrate docking with homology models identified structural elements causing differences in their product spectra. Raffinose, over sucrose, was the preferred donor molecule for the LS from Vibrio natriegens, N. aromaticivorans, and Paraburkolderia graminis. The LSs examined were found to have wide acceptor promiscuity, utilizing monosaccharides, disaccharides, and two alcohols to a high degree.

Recent advances in β-galactosidase and fructosyltransferase immobilization technology

The highly demanding conditions of industrial processes may lower the stability and affect the activity of enzymes used as biocatalysts. Enzyme immobilization emerged as an approach to promote stabilization and easy removal of enzymes for their reusability. The aim of this review is to go through the principal immobilization strategies addressed to achieve optimal industrial processes with special care on those reported for two types of enzymes: β-galactosidases and fructosyltransferases. The main methods used to immobilize these two enzymes are adsorption, entrapment, covalent coupling and cross-linking or aggregation (no support is used), all of them having pros and cons. Regarding the support, it should be cost-effective, assure the reusability and an easy recovery of the enzyme, increasing its stability and durability. The discussion provided showed that the type of enzyme, its origin, its purity, together with the type of immobilization method and the support will affect the performance during the enzymatic synthesis. Enzymes' immobilization involves interdisciplinary knowledge including enzymology, nanotechnology, molecular dynamics, cellular physiology and process design. The increasing availability of facilities has opened a variety of possibilities to define strategies to optimize the activity and re-usability of β-galactosidases and fructosyltransferases, but there is still great place for innovative developments.

Levansucrase from Bacillus amyloliquefaciens KK9 and Its Y237S Variant Producing the High Bioactive Levan-Type Fructooligosaccharides

Levan-typed fructooligosaccharide (LFOS), a β-2,6 linked oligofructose, displays the potential application as a prebiotic and therapeutic dietary supplement. In the present study, LFOS was synthesized using levansucrase from Bacillus amyloliquefaciens KK9 (LsKK9). The wild-type LsKK9 was cloned and expressed in E. coli, and purified by cation exchanger chromatography. Additionally, Y237S variant of LsKK9 was constructed based on sequence alignment and structural analysis to enhance the LFOS production. High-performance anion-exchange chromatography coupled with pulsed amperometric detection (HPAEC-PAD) analysis indicated that Y237S variant efficiently produced a higher amount of short-chain LFOS than wild type. Also, the concentration of enzyme and sucrose in the reactions was optimized. Finally, prebiotic activity assay demonstrated that LFOS produced by Y237S variant had higher prebiotic activity than that of the wild-type enzyme, making the variant enzyme attractive for food biotechnology.

Computational design of Bacillus licheniformis RN-01 levansucrase for control of the chain length of levan-type fructooligosaccharides

Levansucrase (LS) from Gram-positive bacteria generally produces a large quantity of levan polymer, a polyfructose with glucose at the end (GF_n) but a small quantity of levan-type fructooligosaccharides (LFOs). The properties of levan and LFOs depend on their chain lengths, thereby determining their potential applications in food and pharmaceutical industries such as prebiotics and anti-tumor agents. Therefore, an ability to redesign and engineer the active site of levansucrase for synthesis of products with desired degree of polymerization (DP) is very beneficial. We employed computational protein design, docking and molecular dynamics to redesign and engineer the active site of Bacillus licheniformis RN-01 levansucrase for production of LFOs with DP up to five (GF₄), using two approaches: 1) blocking oligosaccharide binding track of GF₃-LS complex with large aromatic residues and 2) eliminating hydrogen bond interactions between terminal glucose of GF₄ and side chains of binding residues of GF₄-LS complex. The designed enzymes and their product patterns from these two approaches were experimentally characterized. The experimental results show that the first approach was successful in creating N251W and N251W/K372Y mutants that synthesized LFOs with DP up to five. This work illustrates how computer-aided approaches can offer novel opportunities to engineer enzymes for desired products.

Partial characterization of a levan type exopolysaccharide (EPS) produced by Leuconostoc mesenteroides showing immunostimulatory and antioxidant activities

Leuconostoc mesenteroides S81 was isolated from traditional sourdough as an exopolysaccharide (EPS) producer strain. The monosaccharide composition of the EPS from strain S81 was characterized by HPLC analysis and only fructose was found in the repeating unit structure. The NMR spectroscopy analysis revealed that EPS was a levan type EPS as a β-(2 → 6)-linked fructan. The FTIR analysis further confirmed the presence of the furanoid rings in the EPS structure. The levan S81 showed high level of thermal stability determined by DSC and TGA analysis. The lyophilised levan S81 showed a sheet-like compact morphology and its aqueous solution formed spheroidal lumps with a compact structure detected by SEM and AFM analysis, respectively. Importantly the levan S81 showed a high level of immunomodulatory role, induced the anti-inflammatory cytokine IL-4, and exhibited a strong antioxidant capacity with EC₅₀ value 1.7 mg mL^-1 obtained by hydroxyl radical scavenging activity test under in vitro conditions. These findings reveal potential of levan S81 for technological purposes and as a potential natural immunomodulatory and antioxidant.

Exploring the sequence variability of polymerization-involved residues in the production of levan- and inulin-type fructooligosaccharides with a levansucrase

The connection between the gut microbiome composition and human health has long been recognized, such that the host-microbiome interplay is at present the subject of the so-called “precision medicine”. Non-digestible fructooligosaccharides (FOS) can modulate the microbial composition and therefore their consumption occupies a central place in a strategy seeking to reverse microbiome-linked diseases. We created a small library of Bacillus megaterium levansucrase variants with focus on the synthesis of levan- and inulin-type FOS. Modifications were introduced at positions R370, K373 and F419, which are either part of the oligosaccharide elongation pathway or are located in the vicinity of residues that modulate polymerization. These amino acids were exchanged by residues of different characteristics, some of them being extremely low- or non-represented in enzymes of the levansucrase family (Glycoside Hydrolase 68, GH68). F419 seemed to play a minor role in FOS binding. However, changes at R370 abated the levansucrase capacity to synthesize levan-type oligosaccharides, with some mutations turning the product specificity towards neo-FOS and the inulin-like sugar 1-kestose. Although variants retaining the native R370 produced efficiently levan-type tri-, tetra- and pentasaccharides, their capacity to elongate these FOS was hampered by including the mutation K373H or K373L. Mutant K373H, for instance, generated 37- and 5.6-fold higher yields of 6-kestose and 6-nystose, respectively, than the wild-type enzyme, while maintaining a similar catalytic activity. The effect of mutations on the levansucrase product specificity is discussed.

Rational re-design of Lactobacillus reuteri 121 inulosucrase for product chain length control

Fructooligosaccharides (FOSs) are well-known prebiotics that are widely used in the food, beverage and pharmaceutical industries. Inulosucrase (E.C. 2.4.1.9) can potentially be used to synthesise FOSs from sucrose. In this study, inulosucrase from Lactobacillus reuteri 121 was engineered by site-directed mutagenesis to change the FOS chain length. Three variants (R483F, R483Y and R483W) were designed, and their binding free energies with 1,1,1-kestopentaose (GF4) were calculated with the Rosetta software. R483F and R483Y were predicted to bind with GF4 better than the wild type, suggesting that these engineered enzymes should be able to effectively extend GF4 by one residue and produce a greater quantity of GF5 than the wild type. MALDI-TOF MS analysis showed that R483F, R483Y and R483W variants could synthesise shorter chain FOSs with a degree of polymerization (DP) up to 11, 10, and 10, respectively, while wild type produced longer FOSs and in polymeric form. Although the decrease in catalytic activity and the increase of hydrolysis/transglycosylation activity ratio was observed, the variants could effectively synthesise FOSs with the yield up to 73% of substrate. Quantitative analysis demonstrated that these variants produced a larger quantity of GF5 than wild type, which was in good agreement with the predicted binding free energy results. Our findings demonstrate the success of using aromatic amino acid residues, at position D418, to block the oligosaccharide binding track of inulosucrase in controlling product chain length.

Comparison of the Levansucrase from the epiphyte Erwinia tasmaniensis vs its homologue from the phytopathogen Erwinia amylovora

Erwinia tasmaniensis is an epiphytic bacterium related to the plant pathogen Erwinia amylovora, the etiological agent of fire blight. In this study the levansucrase from E. tasmaniensis (EtLsc) has been compared with the homologous enzyme from E. amylovora (EaLsc). We characterized the enzymatic activity and compared the products profile of both enzymes by High Performance Anion Exchange Chromatography coupled with Pulsed Amperometric Detector (HPAEC-PAD). Moreover we determined the crystal structure of EtLsc to understand the structural peculiarity causing the different product profiles of the two homologues. EtLsc exhibits increased efficiency in the production of FOS, resulting in a better catalyst for biotechnological synthesis than EaLsc. Based on our results, we propose that the role of this enzyme in the life cycle of the two bacteria is most likely related to survival, rather than linked to pathogenicity in E. amylovora.

Discovery of new levansucrase enzymes with interesting properties and improved catalytic activity to produce levan and fructooligosaccharides

Mining for new levansucrase enzymes with high levan production, transfructosylating activity, and thermal stability and studying their kinetics and acceptor specificity.

Modulation of fructooligosaccharide chain length and insight into the product binding motif of Lactobacillus reuteri 121 inulosucrase

Inulosucrase (E.C. 2.4.1.9) is a bacterial fructosyltransferase that synthesizes inulin-type fructooligosaccharide, using sucrose as a substrate. We modulated the size of fructooligosaccharide synthesized by Lactobacillus reuteri 121 inulosucrase using rational designed mutagenesis. Nine residues: D478, D479, S482, R483, N543, W551, N555, N561 and D689, were changed based on the active site architecture and amino acids potentially interacting with saccharides. The selected residues were substituted with alanine to investigate the contribution of these residues to FOS chain length. Enzymatic activity assays demonstrated that the transglycosylation/hydrolysis ratios of D479A, R483A, N543A, W551A and N555A mutants were significantly different from that of the wild type. Almost all mutants, except D478A, synthesized oligosaccharides with different size distribution compared to that of wild type. Molecular docking further provides insights into the product binding motif of Lactobacillus reuteri 121 inulosucrase and strengthens an important role of amino acid residues at remote locations from the active site on the enzymatic activity and product specificity.

D181A Site-Mutagenesis Enhances Both the Hydrolyzing and Transfructosylating Activities of BmSUC1, a Novel β-Fructofuranosidase in the Silkworm Bombyx mori

β-fructofuranosidase (β-FFase) belongs to the glycosyl-hydrolase family 32 (GH32), which can catalyze both the release of β-fructose from β-d-fructofuranoside substrates to hydrolyze sucrose and the synthesis of short-chain fructooligosaccharide (FOS). BmSuc1 has been cloned and identified from the silkworm Bombyx mori as a first animal type of β-FFase encoding gene. It was hypothesized that BmSUC1 plays an important role in the silkworm-mulberry adaptation system. However, there is little information about the enzymatic core sites of BmSUC1. In this study, we mutated three amino acid residues (D63, D181, and E234) that represent important conserved motifs for β-FFase activity in GH32 to alanine respectively by using site-directed mutagenesis. Recombinant proteins of three mutants and wild type BmSUC1 were obtained by using a Bac-to-Bac/BmNPV expression system and BmN cells. Enzymatic activity, kinetic properties, and substrate specificity of the four proteins were analyzed. High Performance Liquid Chromatography (HPLC) was used to compare the hydrolyzing and transfructosylating activities between D181A and wtBmSUC1. Our results revealed that the D63A and E234A mutations lost activity, suggesting that D63 and E234 are key amino acid residues for BmSUC1 to function as an enzyme. The D181A mutation significantly enhanced both hydrolyzing and transfructosylating activities of BmSUC1, indicating that D181 may not be directly involved in catalyzation. The results provide insight into the chemical catalyzation mechanism of BmSUC1 in B. mori. Up-regulated transfructosylating activity of BmSUC1 could provide new ideas for using B. mori β-FFase to produce functional FOS.

The fructan syndrome: Evolutionary aspects and common themes among plants and microbes

Fructans are multifunctional fructose-based water soluble carbohydrates found in all biological kingdoms but not in animals. Most research has focused on plant and microbial fructans and has received a growing interest because of their practical applications. Nevertheless, the origin of fructan production, the so-called "fructan syndrome," is still unknown. Why fructans only occur in a limited number of plant and microbial species remains unclear. In this review, we provide an overview of plant and microbial fructan research with a focus on fructans as an adaptation to the environment and their role in (a)biotic stress tolerance. The taxonomical and biogeographical distribution of fructans in both kingdoms is discussed and linked (where possible) to environmental factors. Overall, the fructan syndrome may be related to water scarcity and differences in physicochemical properties, for instance, water retaining characteristics, at least partially explain why different fructan types with different branching levels are found in different species. Although a close correlation between environmental stresses and fructan production is quite clear in plants, this link seems to be missing in microbes. We hypothesize that this can be at least partially explained by differential evolutionary timeframes for plants and microbes, combined with potential redundancy effects.

Impaired coordination of nucleophile and increased hydrophobicity in the +1 subsite shift levansucrase activity towards transfructosylation

Bacterial levansucrases produce β(2,6)-linked levan-type polysaccharides using sucrose or sucrose analogs as donor/acceptor substrates. However, the dominant reaction of Bacillus megaterium levansucrase (Bm-LS) is hydrolysis. Single domain levansucrases from Gram-positive bacteria display a wide substrate-binding pocket with open access to water, challenging engineering for transfructosylation-efficient enzymes. We pursued a shift in reaction specificity by either modifying the water distribution in the active site or the coordination of the catalytic acid/base (E352) and the nucleophile (D95), thus affecting the fructosyl-transfer rate and allowing acceptors other than water to occupy the active site. Two serine (173/422) and two water-binding tyrosine (421/439) residues located in the first shell of the catalytic pocket were modified. Library variants of S173, Y421 and S422, which coordinate the position of D95 and E352, show increased transfructosylation (30–200%) and modified product spectra. Substitutions at position 422 have a higher impact on sucrose affinity, while changes at position 173 and 421 have a strong effect on the overall catalytic rate. As most retaining glycoside hydrolases (GHs) Bm-LS catalyzes hydrolysis and transglycosylation via a double displacement reaction involving two-transition states (TS1 and TS2). Hydrogen bonds of D95 with the side chains of S173 and S422 contribute a total of 2.4 kcal mol⁻¹ to TS1 stabilization, while hydrogen bonds between invariant Y421, E352 and the glucosyl C-2 hydroxyl-group of sucrose contribute 2.15 kcal mol⁻¹ stabilization. Changes at Y439 render predominantly hydrolytic variants synthesizing shorter oligosaccharides.