Chaperone-assisted translocation of flexible polymers in three dimensions

Polymer translocation: Effects of confinement

We investigate the influence of varying confinement on the dynamics of polymer translocation through a cone-shaped channel. For this, a linear polymer chain is modeled using self-avoiding walks on a square lattice. The cis side of a cone-shaped channel has a finite volume, while the trans side has a semi-infinite space. The confining environment is varied either by changing the position of the back wall while keeping the apex angle fixed or altering the apex angle while keeping the position of the back wall fixed. In both cases, the effective space ϕ, which represents the number of monomers in a chain relative to the total number of accessible sites within the cone, is reduced due to the imposed confinement. Consequently, the translocation dynamics are affected. We analyze the entropy of the confined system as a function of ϕ, which exhibits nonmonotonic behavior. We also calculate the free energy associated with the confinement as a function of a virtual coordinate for different positions of the back wall (base of the cone) along the conical axis for various apex angles. Employing the Fokker-Planck equation, we calculate the translocation time as a function of ϕ for different solvent conditions across the channel. Our findings indicate that the translocation time decreases as ϕ increases, but it eventually reaches a saturation point at a certain value of ϕ. Moreover, we highlight the possibility of controlling the translocation dynamics by manipulating the solvent quality across the channel. Furthermore, our investigation delves into the intricacies of polymer translocation through a cone-shaped channel, considering both repulsive and neutral interactions with the channel wall. This exploration unveils nuanced dynamics and sheds light on the factors that significantly impact translocation within confined channels.

Experimental study of a nanoscale translocation ratchet

Despite an extensive theoretical and numerical background, the translocation ratchet mechanism, which is fundamental for the transmembrane transport of biomolecules, has never been experimentally reproduced at the nanoscale. Only the Sec61 and bacterial type IV pilus pores were experimentally shown to exhibit a translocation ratchet mechanism. Here we designed a synthetic translocation ratchet and quantified its efficiency as a nanopump. We measured the translocation frequency of DNA molecules through nanoporous membranes and showed that polycations at the trans side accelerated the translocation in a ratchet-like fashion. We investigated the ratchet efficiency according to geometrical and kinetic parameters and observed the ratchet to be only dependent on the size of the DNA molecule with a power law [Formula: see text]. A threshold length of 3 kbp was observed, below which the ratchet did not operate. We interpreted this threshold in a DNA looping model, which quantitatively explained our results.

DsbA is a redox-switchable mechanical chaperone

DsbA is a ubiquitous bacterial oxidoreductase that associates with substrates during and after translocation, yet its involvement in protein folding and translocation remains an open question. Here we demonstrate a redox-controlled chaperone activity of DsbA, on both cysteine-containing and cysteine-free substrates, using magnetic tweezers-based single molecule force spectroscopy that enables independent measurements of oxidoreductase activity and chaperone behavior. Interestingly we found that this chaperone activity is tuned by the oxidation state of DsbA; oxidized DsbA is a strong promoter of folding, but the effect is weakened by the reduction of the catalytic CXXC motif. We further localize the chaperone binding site of DsbA using a seven-residue peptide which effectively blocks the chaperone activity. We found that the DsbA assisted folding of proteins in the periplasm generates enough mechanical work to decrease the ATP consumption needed for periplasmic translocation by up to 33%.

Pore shapes effects on polymer translocation

We translocated polymers through pores of different shapes and interaction patterns in three dimensions by Langevin molecular dynamics. There were four simple cylindrical pores of the same length but with different diameters. The results showed that even though decreasing the pore diameter would always decrease the translocation velocity, it was strongly dependent on the shape of the increased pore diameter. Although increasing the pore diameter made the translocation faster in simple cylindrical pores, it was complicated in different pore shapes, e.g. increasing the diameter in the middle decreased the translocation velocity. Investigating polymer shapes through the translocation process and comparing the shapes by the cumulative waiting time for different pore structures reveals the non-equilibrium properties of translocation. Moreover, polymer shape parameters such as gyration radius, polymer center of mass, and average aspect ratio help us to distinguish different pore shapes and/or different polymers.

Translocation through a narrow pore under a pulling force

We employ a three-dimensional molecular dynamics to simulate a driven polymer translocation through a nanopore by applying an external force, for four pore diameters and two external forces. To see the polymer and pore interaction effects on translocation time, we studied nine interaction energies. Moreover, to better understand the simulation results, we investigate polymer center of mass, shape factor and the monomer spatial distribution through the translocation process. Our results reveal that increasing the polymer-pore interaction energy is accompanied by an increase in the translocation time and decrease in the process rate. Furthermore, for pores with greater diameter, the translocation becomes faster. The shape analysis of the polymer indicates that the polymer shape is highly sensitive to the interaction energy. In great interactions, the monomers come close to the pore from both sides. As a result, the translocation becomes fast at first and slows down at last. Overall, it can be concluded that the external force does not play a major role in the shape and distribution of translocated monomers. However, the interaction energy between monomer and nanopore has a major effect especially on the distribution of translocated monomers on the trans side.

Translocation of Charged Polymers through a Nanopore in Monovalent and Divalent Salt Solutions: A Scaling Study Exploring over the Entire Driving Force Regimes

Langevin dynamics simulations are performed to study polyelectrolytes driven through a nanopore in monovalent and divalent salt solutions. The driving electric field E is applied inside the pore, and the strength is varied to cover the four characteristic force regimes depicted by a rederived scaling theory, namely the unbiased (UB) regime, the weakly-driven (WD) regime, the strongly-driven trumpet (SD(T)) regime and the strongly-driven isoflux (SD(I)) regime. By changing the chain length N, the mean translocation time is studied under the scaling form 〈 τ 〉 ∼ N α E - δ . The exponents α and δ are calculated in each force regime for the two studied salt cases. Both of them are found to vary with E and N and, hence, are not universal in the parameter's space. We further investigate the diffusion behavior of translocation. The subdiffusion exponent γ p is extracted. The three essential exponents ν s , q, z p are then obtained from the simulations. Together with γ p , the validness of the scaling theory is verified. Through a comparison with experiments, the location of a usual experimental condition on the scaling plot is pinpointed.

Force-dependent diffusion coefficient of molecular Brownian ratchets

We study the mean velocity and diffusion constant in three related models of molecular Brownian ratchets. Brownian ratchets can be used to describe translocation of biopolymers like DNA through nanopores in cells in the presence of chaperones on the trans side of the pore. Chaperones can bind to the polymer and prevent it from sliding back through the pore. First, we study a simple model that describes the translocation in terms of an asymmetric random walk. It serves as an introductory example but already captures the main features of a Brownian ratchet. We then provide an analytical expression for the diffusion constant in the classical model of a translocation ratchet that was first proposed by Peskin et al. [C. S. Peskin, G. M. Odell, and G. F. Oster, Cellular motions and thermal fluctuations: The Brownian ratchet, Biophys. J. 65, 316 (1993)BIOJAU0006-349510.1016/S0006-3495(93)81035-X]. This model is based on the assumption that the binding and unbinding of the chaperones are much faster than the diffusion of the DNA strand. To remedy this shortcoming, we propose a modified model that is also applicable if the (un)binding rates are finite. We calculate the force-dependent mean velocity and diffusivity for this model and compare the results to the original one. Our analysis shows that for large pulling forces the predictions of both models can differ strongly even if the (un)binding rates are large in comparison to the diffusion timescale but still finite. Furthermore, implications of the thermodynamic uncertainty relation on the efficiency of Brownian ratchets are discussed.

Reducing the variance in the translocation times by prestretching the polymer

Langevin dynamics simulations of polymer translocation are performed where the polymer is stretched via two opposing forces applied on the first and last monomer before and during translocation. In this setup, polymer translocation is achieved by imposing a bias between the two pulling forces such that there is net displacement towards the trans side. Under the influence of stretching forces, the elongated polymer ensemble contains less variations in conformations compared to an unstretched ensemble. Simulations demonstrate that this reduced spread in initial conformations yields a reduced variation in translocation times relative to the mean translocation time. This effect is explored for different ratios of the amplitude of thermal fluctuations to driving forces to control for the relative influence of the thermal path sampled by the polymer. Since the variance in translocation times is due to contributions coming from sampling both thermal noise and initial conformations, our simulations offer independent control over the two main sources of noise and allow us to shed light on how they both contribute to translocation dynamics. Simulation parameter space corresponding to experimentally relevant conditions is highlighted and shown to correspond to a significant decrease in the spread of translocation times, thus indicating that stretching DNA prior to translocation could assist nanopore-based sequencing and sizing applications.

Quantification of tension to explain bias dependence of driven polymer translocation dynamics

Motivated by identifying the origin of the bias dependence of tension propagation, we investigate methods for measuring tension propagation quantitatively in computer simulations of driven polymer translocation. Here, the motion of flexible polymer chains through a narrow pore is simulated using Langevin dynamics. We measure tension forces, bead velocities, bead distances, and bond angles along the polymer at all stages of translocation with unprecedented precision. Measurements are done at a standard temperature used in simulations and at zero temperature to pin down the effect of fluctuations. The measured quantities were found to give qualitatively similar characteristics, but the bias dependence could be determined only using tension force. We find that in the scaling relation τ∼N^{β}f_{d}^{α} for translocation time τ, the polymer length N, and the bias force f_{d}, the increase of the exponent β with bias is caused by center-of-mass diffusion of the polymer toward the pore on the cis side. We find that this diffusion also causes the exponent α to deviate from the ideal value -1. The bias dependence of β was found to result from combination of diffusion and pore friction and so be relevant for polymers that are too short to be considered asymptotically long. The effect is relevant in experiments all of which are made using polymers whose lengths are far below the asymptotic limit. Thereby, our results also corroborate the theoretical prediction by Sakaue's theory [Polymers 8, 424 (2016)2073-436010.3390/polym8120424] that there should not be bias dependence of β for asymptotically long polymers. By excluding fluctuations we also show that monomer crowding at the pore exit cannot have a measurable effect on translocation dynamics under realistic conditions.

Chaperone-driven polymer translocation through nanopore: Spatial distribution and binding energy

Chaperones are binding proteins working as a driving force in biopolymer translocation. They bind to the biopolymer near the pore and prevent its backsliding. Chaperones may have different spatial distributions. Recently, we showed the importance of their spatial distribution in translocation and its effects on the sequence dependency of the translocation time. Here we focus on homopolymers and exponential distribution. Because of the exponential distribution of chaperones, the energy dependency of the translocation time will change. Here we find a minimum in translocation time versus binding effective energy (EBE) curve. The same trend can be seen in the scaling exponent of time versus polymer length, [Formula: see text] ([Formula: see text]), when plotted against EBE. Interestingly in some special cases, e.g. chaperones of size [Formula: see text] and with an exponential distribution rate of [Formula: see text], the minimum even reaches to an amount of less than 1 ([Formula: see text]). We explain the possibility of this rare result. Moreover, based on a theoretical discussion we show that, by taking into account the velocity dependency of the translocation on polymer length, one can truly predict the value of this minimum.