An AC-Coupled 1st-order Δ-ΔΣ Readout IC for Area-Efficient Neural Signal Acquisition

NeuroBus - Architecture for an Ultra-Flexible Neural Interface

This article presents the system architecture for an implant concept called NeuroBus. Tiny distributed direct digitizing neural recorder ASICs on an ultra-flexible polyimide substrate are connected in a bus-like structure, allowing short connections between electrode and recording front-end with low wiring effort and high customizability. The small size (344 μm × 294 μm) of the ASICs and the ultraflexible substrate allow a low bending stiffness, enabling the implant to adapt to the curvature of the brain and achieving high structural biocompatibility. We introduce the architecture, the integrated building blocks, and the post-CMOS processes required to realize a NeuroBus, and we characterize the prototyped direct digitizing neural recorder front-end as well as polyimide-based ECoG brain interface. A rodent animal model is further used to validate the joint capability of the recording front-end and thin-film electrode array.

A Low-Noise Low-Power 0.001Hz-1kHz Neural Recording System-on-Chip With Sample-Level Duty-Cycling

Advances in brain-machine interfaces and wearable biomedical sensors for healthcare and human-computer interactions call for precision electrophysiology to resolve a variety of biopotential signals across the body that cover a wide range of frequencies, from the mHz-range electrogastrogram (EGG) to the kHz-range electroneurogram (ENG). Existing integrated wearable solutions for minimally invasive biopotential recordings are limited in detection range and accuracy due to trade-offs in bandwidth, noise, input impedance, and power consumption. This article presents a 16-channel wide-band ultra-low-noise neural recording system-on-chip (SoC) fabricated in 65nm CMOS for chronic use in mobile healthcare settings that spans a bandwidth of 0.001 Hz to 1 kHz through a featured sample-level duty-cycling (SLDC) mode. Each recording channel is implemented by a delta-sigma analog-to-digital converter (ADC) achieving 1.0 μ V rms input-referred noise over 1Hz-1kHz bandwidth with a Noise Efficiency Factor (NEF) of 2.93 in continuous operation mode. In SLDC mode, the power supply is duty-cycled while maintaining consistently low input-referred noise levels at ultra-low frequencies (1.1 μV rms over 0.001Hz-1Hz) and 435 M Ω input impedance. The functionalities of the proposed SoC are validated with two human electrophysiology applications: recording low-amplitude electroencephalogram (EEG) through electrodes fixated on the forehead to monitor brain waves, and ultra-slow-wave electrogastrogram (EGG) through electrodes fixated on the abdomen to monitor digestion.

Power-Efficient LFP-Adaptive Dynamic Zoom-and-Track Incremental ΔΣ Front-End for Dual-Band Subcortical Recordings

We report a power-efficient analog front-end integrated circuit (IC) for multi-channel, dual-band subcortical recordings. In order to achieve high-resolution multi-channel recordings with low power consumption, we implemented an incremental ΔΣ ADC (IADC) with a dynamic zoom-and-track scheme. This scheme continuously tracks local field potential (LFP) and adaptively adjusts the input dynamic range (DR) into a zoomed sub-LFP range to resolve tiny action potentials. Thanks to the reduced DR, the oversampling rate of the IADC can be reduced by 64.3% compared to the conventional approach, leading to significant power reduction. In addition, dual-band recording can be easily attained because the scheme continuously tracks LFPs without additional on-chip hardware. A prototype four-channel front-end IC has been fabricated in 180 nm standard CMOS processes. The IADC achieved 11.3-bit ENOB at 6.8 μW, resulting in the best Walden and SNDR FoMs, 107.9 fJ/c-s and 162.1 dB, respectively, among two different comparison groups: the IADCs reported up to date in the state-of-the-art neural recording front-ends; and the recent brain recording ADCs using similar zooming or tracking techniques to this work. The intrinsic dual-band recording feature reduces the post-processing FPGA resources for subcortical signal band separation by >45.8%. The front-end IC with the zoom-and-track IADC showed an NEF of 5.9 with input-referred noise of 8.2 μVrms, sufficient for subcortical recording. The performance of the whole front-end IC was successfully validated through in vivo animal experiments.